Key Benefits:
In compliance with the provisions of Article 11 (f) of the Infrastructure Regulation for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1996 (BOE of 6 February 1996), and having regard to the standards developed by the European Standards for Standardisation CEN, CENELEC, ETSI and whose national transposition corresponds to the Spanish Association for Standardisation and Certification (AENOR), an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, in accordance with Royal Decree 1614/1985 of 1 August 1985, and recognised for the purposes of the additional provision of Royal Decree 2200/1995 of 28 December 1995.
Having regard to the procedure for the elaboration of European standards, in accordance with paragraph 11.2.6.4 of the common rules of CEN/CENELEC and 13.7 of the rules of procedure of ETSI for the standardisation work of those mentioned European bodies.
This Directorate General has resolved to publish in the "Official State Gazette" the list of European standards to which the Spanish standard range has been granted during the month of July 2011, identified by its title and code numerical, indicating their date of availability, as set out in the Annex to this Resolution.
Madrid, September 5, 2011. -Director General of Industry, Jesus Candil Gonzalo.
ANNEX
Ratification of European rules. July 2011
| Title | F. availb. | Anula | |||
|---|---|---|---|---|---|
|
2240-061:2011 | Aerospace. Filament lamps. Part 061: Lamp, code 1683. Product Standard. | 2011-06-15 |
| ||
|
2240-062:2011 | Aerospace Material. Filament lamps. Part 062: Lampara, code 1810. Product Standard. | 2011-06-15 |
| ||
|
2240-063:2011 | Aerospace Material. Filament lamps. Part 063: Lampara, code 1815. Product Standard. | 2011-06-15 |
| ||
|
2240-0664:2011 | Aerospace Material. Filament lamps. Part 064: Lampara, code 1819. Product Standard. | 2011-06-15 |
| ||
|
2240-065:2011 | Aerospace Material. Filament lamps. Part 065: Lampara, code 1820. Product Standard. | 2011-06-15 |
| ||
|
15907:2010 | Movie Identification. Improved interoperability of metadata. Item structures and structures. | 2010-07-21 |
| ||
|
50377-4-2:2011 |
A set of connectors and interconnected components for use in optical fiber communication systems. Product specifications. Part 4-2: Type SC-APC grade 8 and 9 completed according to IEC 60793-2 Category B1.1 of monomode fiber. | 2011-03-25 |
| ||
| EN 50377-4-4:2011 | Set of connectors and interconnected components for use in optical fiber communication systems. Product specifications. Part 4-4: SC-PC type terminated according to IEC 60793-2 Category B1.1 of single-mode fiber. | 2011-03-25 |
| ||
|
| Set of connectors and interconnected components for use in optical fiber communication systems. Product specifications. Part 13-2: LX.5-PC DUPLEX TYPE with termination according to EN 60793-2-50 standard in single-mode fiber with category B1.1 and B1.3, with full-connector U-category zirconium | 2011-03-25 |
| ||
|
50377-13-3:2011 | Set of connectors and interconnected components for use in systems optical fibre communication. Product specifications. Part 13-3: LX.5-APC DUPLEX Type with termination according to EN 60793-2-50 standard in single-mode fiber with category B1.1 and B1.3, with full-connector U-category zirconium | 2011-03-25 |
| ||
|
60300-3-12:2011 | Managing reliability. Part 3-12: Application Guide. Integrated logistics support | 2011-03-25 |
| ||
|
60461:2011 | Time and Control Code. | 2011-03-18 |
| ||
|
60601-2-45:2011 | Electromedical Equipment. Part 2-45: General requirements for the basic safety and essential functioning of the X-ray mammography and stereotaxia mammography devices. | 2011-03-18 |
| ||
|
61169-18:2011 | Radio Frequency Connectors. Part 18: Particular specification. Coaxial connectors for SSMA-type radio frequency. | 2011-03-04 |
| ||
|
61169-19:2011 | Radio-frequency connectors. Part 19: Particular specification. Coaxial connectors for radio frequency of type SSMB. | 2011-03-04 |
| ||
|
61753-086-6:2011 | Operating rule for fiber optic and passive component interconnect devices. Part 086-2: Monomode fibre WWDM devices, not connectorized, bidirectional, with downflow to 1490/1550 nm and rise to 1310 nm, for category O. Uncontrolled environment | 2011-03-18 |
| ||
|
61753-131-3:2011 | Operating rule for fibre interconnect devices Optical and passive components. Part 131-3: Monomode mechanical fiber for category U. Uncontrolled environment | 2011-03-18 |
| ||
| EN 61966-12-1:2011 | Multimedia computers and systems. Colour measurement and management. Part 12-1: Metadata for identifying the color range (Gama ID). | 2011-03-04 |
| ||
| EN 62132-2:2011 | Integrated Circuits. Measurement of electromagnetic immunity. Part 2: Measure of the radiated immunity. Method of the TEM cell and the broadband TEM cell | 2011-03-04 |
| ||
|
62246-1:2011 | Tab Contact Block. Part 1: Generic specification. | 2011-03-18 |
| ||
|
62496-2-2:2011 |
Optical Circuit Boards. Test and measurement procedures. Part 2-2: Measurements: Dimensions of optical circuit boards. | 2011-03-04 |
| ||
| 62496-4:2011 | Optical Circuit Plates. Interface rule. Part 4: Generalities and guidance | 2011-03-04 |
| ||
|
62514:2010 | 2010-07-16 |
| |||
| Table_table_izq"> EN 62537:2010 | Input-signal speaker interface digital based on IEC 60958 Standard | 2010-07-16 |
| ||
|
ISO 10414-2:2011 |
Oil and natural gas industries. Tests in the field of drilling fluids. Part 2: Oil-based Fluids (ISO 10414-2:2011) | 2011-06-15 |
| ||
|
ISO 11960:2011 | Oil and natural gas industries. Steel tubes used as casing tubes or pipe for wells (ISO 11960:2011) | 2011-06-22 | EN ISO 11960:2004 EN ISO 11960 :2004/AC: 2007 | ||
|
ISO 13501:2011 | Oil and natural gas industries. Drilling fluids. Evaluation of treatment systems (ISO 13501:2011) | 2011-06-15 | EN ISO 13501:2006 | ||
| EN ISO 13628-4:2010/AC: 2011 | Oil and natural gas industries. Design and operation of submarine production systems. Part 4: Underwater head and production tree underwater equipment. Technical Corrigendum 1 (ISO 13628-4:2010/Cor 1:2011) | 2011-06-15 |
| ||
|
ISO 14253-2:2011 | Product geometrical specification (GPS). Inspection by measuring parts and measuring equipment. Part 2: Guidance for estimating measurement uncertainty in GPS, measuring equipment calibration and product verification (ISO 14253-2:2011) | 2011-04-15 |
ISO 14253-3:2011 |
| 14253-2:2005 | Product Geometric Specification (GPS). Inspection by measuring parts and measuring equipment. Part 3: Guidelines for the achievement of agreements in declarations of uncertainties of measure ISO 14253-3:2011) | 2011-04-15 |
|
|
ISO 24534-1:2010 | Automatic vehicle and equipment identification. Electronic identification of license plates (ERI) for vehicles. Part 1: Architecture. (ISO 24534-1:2010) | 2010-07-15 |
| ||
|
ISO 24534-2:2010 | Automatic Vehicle and Equipment Identification. Electronic identification of license plates (ERI) for vehicles. Part 2: Operational Requirements (ISO 24534-2:2010) | 2010-07-15 |
| ||
|
ISO 24534-3:2010 | Automatic vehicle and equipment identification. Electronic identification of license plates (ERI) for vehicles. Part 3: Vehicle data (ISO 24534-3:2010) | 2010-07-15 |
| ||
|
ISO 24534-4:2010 | Automatic identification of vehicles and equipment. Electronic identification of license plates (ERI) for vehicles. Part 4: Secure communications using asymmetric techniques (ISO 24534-4:2010) | 2010-07-15 |
| ||
| ISO 25378:2011 | Product Geometric Specification (GPS). Characteristics and conditions. Definitions (ISO 25378:2011) | 2011-04-01 |
|
