Resolution Of 9 May 2012, The Directorate General Of Industry And Small And Medium Enterprises, For Which The Relationship Of Une Standards Approved By Aenor During The Month Of April 2012 Is Published.

Original Language Title: Resolución de 9 de mayo de 2012, de la Dirección General de Industria y de la Pequeña y Mediana Empresa, por la que se publica la relación de normas UNE aprobadas por AENOR durante el mes de abril de 2012.

Read the untranslated law here: http://www.boe.es/buscar/doc.php?id=BOE-A-2012-6852

In compliance with Article 11, paragraph f) of Regulation Infrastructure for Quality and Industrial Security, approved by Royal Decree 2200/1995, of 28 December (BOE of February 6, 1996), and seen the record of the rules adopted by the Spanish Association for Standardization and Certification (AENOR), entity designated by order of the Ministry of Industry and Energy of February 26, 1986, according to Royal Decree 1614/1985, of August 1, and recognized by the first additional provision of Royal Decree 2200/1995 of 28 December.

This Directorate General has decided to publish in the Official Gazette ratio approved by Spanish standards UNE AENOR, for the month of April 2012, identified by title and numerical code, annexed to this resolution.

This resolution will cause effect from the day following its publication in the "Official Gazette" day.

Madrid, May 9, 2012.-The Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX


Standards published in April 2012 months





code




title





Replaces






UNE 60402-1: 2008 / 1M: 2012.





gaseous fuels. Pressure regulators with maximum operating pressure (MOP) of less than or equal to 0.4 bar entry and MOP exceeding 0.05 bar output. Part 1: Regulators with safety valve built tripping minimum pressure exceeding 4.8 equivalent flow rate m3 (n) / h of air.












UNE 60402-2: 2008 / 1M: 2012.





gaseous fuels. Pressure regulators with maximum operating pressure (MOP) of less than or equal to 0.4 bar entry and MOP exceeding 0.05 bar output. Part 2: Regulators with MOP than 150 mbar entrance with built-in safety valve minimum pressure triggering, with safety valve built tripping maximum pressure and less than or equal to 4.8 equivalent flow rate m3 (n) / h air.












UNE 84655: 2012.





cosmetic raw materials. Vegetable extracts. hidroglicólico extract of ivy (Hedera helix L.).





UNE 84655: 2006.






UNE 84656: 2012.





cosmetic raw materials. Vegetable extracts. hidroglicólico green tea extract (Camellia sinensis L.).





UNE 84656: 2006.






UNE 84657: 2012.





cosmetic raw materials. Vegetable extracts. hidroglicólico ginkgo biloba extract (Ginkgo biloba L.).





UNE 84657: 2006.






UNE 84658: 2012.





cosmetic raw materials. Vegetable extracts. hidroglicólico extract fucus (Fucus vesiculosus L.).





UNE 84658: 2006.






UNE 84659: 2012.





cosmetic raw materials. Vegetable extracts. hidroglicólico butcher's broom extract (Ruscus aculeatus L.).





UNE 84659: 2006.






UNE 84660: 2012.





cosmetic raw materials. Vegetable extracts. hidroglicólico extract of oats (Avena sativa L.).





UNE 84660: 2006.






UNE 116005: 2012.





Manufacture by adding layers in plastic materials. additive manufacturing. Specimen Preparation.












UNE 135340: 2010 / 1M: 2012.





Vertical signs: microprismatic retroreflective polymeric sheets. Characteristics and test methods.












UNE-CEN ISO / TS 27469: 2012 EX.





Petroleum, petrochemical and natural gas. Test method for fire dampers. (ISO / TS 27469: 2010).












UNE-CEN / TS 16233-1: 2012 EX.





Food products. HPLC method for the determination of xanthophylls in fish muscle. Part 1: Determination of astaxanthin and canthaxanthin.













UNE-CEN / TS 16233-2: 2012 EX.





Food products. HPLC method for the determination of xanthophylls in fish muscle. Part 2: Identification of the enantiomeric distribution of astaxanthin.












UNE-EN 71-1: 2012.





Safety of toys. Part 1: mechanical and physical properties.





UNE-EN 71-1: 2006 + A9: 2010.






UNE-EN 474-4: 2008 + A2: 2012.





Earthmoving machinery. Security. Part 4: Requirements for backhoe loaders.





UNE-EN 474-4: 2008 + A1: 2009.






UNE-EN 474-5: 2007 + A2: 2012.





Earthmoving machinery. Security. Part 5: Requirements for hydraulic excavators.





UNE-EN 474-5: 2007 + A1: 2009.






UNE-EN 558: 2008 + A1: 2012.





industrial valves. Size and dimensions between opposing center to one side of metal valves for use in flanged pipe systems faces. PN designated valves and class.





UNE-EN 558: 2008.

UNE-EN 558: 2008 / AC: 2010.






UNE-EN 764-2: 2012.





Pressure equipment. Part 2: Quantities, symbols and units.





UNE-EN 764-2: 2003.






UNE-EN 1096-2: 2012.





Glass in building. Glass layer. Part 2: Requirements and test methods for layers of classes A, B and S.





UNE-EN 1096-2: 2001.






UNE-EN 1096-3: 2012.





Glass in building. Glass layer. Part 3: Requirements and test methods for layers of classes C and D.





UNE-EN 1096-3: 2001.






UNE-EN 1459: 2000 + A3: 2012.





Safety of industrial trucks. Self-propelled variable reach trucks.












UNE-EN 1854: 2010 ERRATUM: 2012.





Pressure control devices for gas burners and gas appliances.












UNE-EN 1863-1: 2012.





Glass in building. Heat strengthened soda lime silicate glass. Part 1: Definition and description.





UNE-EN 1863-1: 2000.






UNE-EN 10025-2: 2006 ERRATUM: 2012.





Hot rolled products of structural steels. Part 2: Technical delivery of unalloyed structural steels Conditions.












UNE-EN 10218-1: 2012.





Wires and steel wire products. Generalities. Part 1: Test methods.





UNE-EN 10218-1: 1995.






UNE-EN 10218-2: 2012.





Wires and steel wire products. Generalities. Part 2: Dimensions and tolerances of the wires.





UNE-EN 10218-2: 1996.






UNE-EN 10264-1: 2012.





Steel wire and wire products. Steel wire cables. Part 1: General requirements.





UNE-EN 10264-1: 2002.






UNE-EN 10264-2: 2012.





Steel wire and wire products. Steel wire cables. Part 2: Steel wire not cold drawn alloy commonly used cable.





UNE-EN 10264-2: 2002.






UNE-EN 10264-3: 2012.





Steel wire and wire products. Steel wire cables. Part 3: round and shaped wires, unalloyed steel, for heavy loads.





UNE-EN 10264-3: 2004.






UNE-EN 10264-4: 2012.





Steel wire and wire products. Steel wire cables. Part 4: Stainless steel wire.





UNE-EN 10264-4: 2003.






UNE-EN 12226: 2012.






Geosynthetics. General tests for evaluation following durability test.





UNE-EN 12226: 2001.






UNE-EN 12839: 2012.





Precast concrete. Elements for fences.












UNE-EN 12859: 2012.





Drywall. Definitions, specifications and testing methods.





UNE-EN 12859: 2009.






UNE-EN 13037: 2012.





Soil improvers and growing media. PH determination.





UNE-EN 13037: 2001.






UNE-EN 13145: 2001 + A1: 2012.





Railway applications. Routes. Sleepers and wooden supports.





UNE-EN 13145: 2001.






UNE-EN 13146-9: 2011 + A1: 2012.





Railway applications. Vía. Test methods for fastening systems. Part 9: Determination of stiffness.





UNE-EN 13146-9: 2011.






UNE-EN 13232-2: 2005 + A1: 2012.





Railway applications. Channel. Turnouts. Part 2: Requirements for geometric design.





UNE-EN 13232-2: 2005.






UNE-EN 13232-3: 2006 + A1: 2012.





Railway applications. Channel. Turnouts. Part 3: Requirements for wheel / rail interaction.





UNE-EN 13232-3: 2006.






UNE-EN 13232-4: 2007 + A1: 2012.





Railway applications. Channel. Turnouts. Part 4: Maneuver, blocking and control.





UNE-EN 13232-4: 2007.






UNE-EN 13232-5: 2007 + A1: 2012.





Railway applications. Channel. Turnouts. Part 5: Needles.





UNE-EN 13232-5: 2007.






UNE-EN 13232-6: 2007 + A1: 2012.





Railway applications. Channel. Turnouts. Part 6: Hearts fixed crossing and crossing.





UNE-EN 13232-6: 2007.






UNE-EN 13232-7: 2007 + A1: 2012.





Railway applications. Channel. Turnouts. Part 7: Crossings with moving parts.





UNE-EN 13232-7: 2007.






UNE-EN 13232-8: 2008 + A1: 2012.





Railway applications. Channel. Turnouts. Part 8: Expansion devices.





UNE-EN 13232-8: 2008.






UNE-EN 13232-9: 2007 + A1: 2012.





Railway applications. Channel. Turnouts. Part 9: Configuration.





UNE-EN 13232-9: 2007.






UNE-EN 13618: 2012.





Flexible connections for potable water. Functional requirements and test methods.





UNE 53626-1: 1989.

UNE 53626-1: 1996 ERRATUM.

UNE 53626-1 / 1M: 1992.

UNE 53626-2: 1989.

UNE 53626-2 / 1M: 1992.






UNE-EN 14081-3: 2012.





Wooden structures. structural timber with rectangular cross section classified by his resistance. Part 3: Mechanical classification. Additional requirements for factory production control.





EN 14081-3: 2005.






UNE-EN 14154-1: 2005 + A2: 2012.





Water meters. Part 1: General requirements.





UNE-EN 14154-1: 2005 + A1: 2008.






UNE-EN 14272: 2012.





Plywood. Calculation method for some mechanical properties.





UNE-ENV 14272: 2003.






UNE-EN 14961-2: 2012.





solid biofuels. Fuel specifications and classes. Part 2: Wood pellets for non-industrial use.












UNE-EN 14961-3: 2012.






solid biofuels. Fuel specifications and classes. Part 3: Wood briquettes for non-industrial use.












UNE-EN 14961-4: 2012.





solid biofuels. Fuel specifications and classes. Part 4: Wood chips for non-industrial use.












UNE-EN 15194: 2009 + A1: 2012.





Cycles. Power-assisted cycles. EPAC bicycles.





UNE-EN 15194: 2009.






UNE-EN 15492: 2012.





Ethanol as a component in the formulation of gasoline. Determination of inorganic chloride and sulfate. Ion chromatography method.





UNE-EN 15492: 2009.






UNE-EN 15943: 2012.





Interchange Format resume. Data model.












UNE-EN 15946: 2012.





Conservation of cultural heritage. Principles of transport packaging.












UNE-EN 15972: 2012.





Water quality. Guidelines for quantitative and qualitative study of marine phytoplankton.












UNE-EN 15997: 2012.





All terrain vehicles (ATV - Quads). Safety requirements and test methods.












UNE-EN 16016-3: 2012.





Non destructive essays. Radiation method. digital tomography. Part 3: Operation and interpretation.












UNE-EN 16039: 2012.





Water quality. Guidelines for assessing the hydromorphological features of lakes.












UNE-EN 16055: 2012.





Leather. raw cowhides. Description, presentation and preservation.





UNE 59100: 1983.

UNE 59101: 1983.






UNE-EN 16105: 2012.





Paints and varnishes. Laboratory method for determining the leaching of substances from coatings intermittent contact with water.












UNE-EN 50527-2-1: 2012.





Procedure for assessment of human exposure to electromagnetic fields on workers with active implantable medical devices. Part 2-1: Specific assessment for workers with cardiac pacemakers.












UNE-EN 50564: 2012.





electrical and electronic household and office appliances. Measurement of low power consumption.












UNE-EN 55016-2-1: 2009 / A1: 2012.





Specification methods and apparatus for measuring radio disturbance and immunity to radio interference. Part 2-1: Methods of measurement of radio disturbance and immunity to radio interference. Measures conducted disturbances.












UNE-EN 60038: 2012.





CENELEC standard voltages.












UNE-EN 60704-2-10: 2012.





Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Part 2-10: Particular requirements for cooking ranges, ovens and electric grills, microwave ovens and any combination of these.












UNE-EN 61029-2-5: 2012.





Safety of machinery semi-fixed power tools. Part 2-5: Particular requirements for band saws requirements.












UNE-EN 62509: 2012.





Battery charge controllers for photovoltaic systems. Behavior and performance.













UNE-EN 62520: 2012.





Railway applications. electric traction. Asynchronous short primary winding type linear motors powered by converters.












UNE-EN ISO 105-B10: 2012.





Textiles. Fastness tests. Part B10: Exposure to artificial weathering. Exposure to a filtered xenon arc lamp radiation. (ISO 105-B10: 2011).












UNE-EN ISO 2419: 2012.





Leather. physical and mechanical tests. Sample preparation and conditioning. (ISO 2419: 2012).





UNE-EN ISO 2419: 2006.






UNE-EN ISO 3035: 2012.





Corrugated paperboard. Determination of flat crush strength. (ISO 3035: 2011).





UNE-EN 23035: 1996.






UNE-EN ISO 3175-3: 2004 / AC: 2012.





Textiles. professional maintenance, dry cleaning and wet cleaning of fabrics and garments. Part 3: Procedure for testing performance when cleaning and finishing are made with hydrocarbon solvents. (ISO 3175-3: 2003 / Cor 1: 2009).












UNE-EN ISO 3175-4: 2004 / AC: 2012.





Textiles. professional maintenance, dry cleaning and wet cleaning of fabrics and garments. Part 4: Procedure for testing performance when cleaning and finishing simulated use wet cleaning. (ISO 3175-4: 2003 / Cor 1: 2009).












UNE-EN ISO 6946: 2012.





Components and building elements. Thermal resistance and thermal transmittance. Calculation method. (ISO 6946: 2007).





UNE-EN ISO 6946: 1997

UNE-EN ISO 6946: 1997 / A1: 2005.






UNE-EN ISO 10211: 2012.





Thermal bridges in building. Heat fluxes and surface temperatures. detailed calculations. (ISO 10211: 2007).





UNE-EN ISO 10211-1: 1995

UNE-EN ISO 10211-2: 2002

UNE-EN ISO 10211-1 / AC: 2002.






UNE-EN ISO 10545-16: 2012.





Ceramic tiles. Part 16: Determination of small color differences. (ISO 10545-16: 2010).





UNE-EN ISO 10545-16: 2001.






UNE-EN ISO 11850: 2012 ERRATUM: 2012.





forestry machinery. Safety requirements. (ISO 11850: 2011).





UNE-EN 14861: 2005 + A1: 2010.






UNE-EN ISO 11979-7: 2007 / A1: 2012.





ophthalmic implants. IOLs. Part 7: Clinical investigations. Modification 1. (ISO 11979-7: 2006 / Amd 1: 2012).












UNE-EN ISO 12137: 2012.





Paints and varnishes. Determination of wear resistance. (ISO 12137: 2011).





UNE-EN ISO 12137-1: 2007.






UNE-EN ISO 14064-1: 2012.





Greenhouse gases. Part 1: Specifications and guidelines at the organization level for quantification and reporting of emissions and reductions of greenhouse gases. (ISO 14064-1: 2006).





UNE-ISO 14064-1: 2006.






UNE-EN ISO 14064-2: 2012.





Greenhouse gases. Part 2: Specifications and guidelines, at the project level for quantification, monitoring and reporting of reductions and improvements in eliminating greenhouse gases. (ISO 14064-2: 2006).





UNE-ISO 14064-2: 2006.






UNE-EN ISO 14064-3: 2012.





Greenhouse gases. Part 3: Specifications and guidelines for validation and verification of declarations of greenhouse gases. (ISO 14064-3: 2006).





UNE-ISO 14064-3: 2006.






UNE-EN ISO 14065: 2012.






Greenhouse gases. Requirements for bodies providing validation and verification of greenhouse gases for use in accreditation or other forms of recognition. (ISO 14065: 2007).





UNE-ISO 14065: 2007.






UNE-EN ISO 16120-1: 2012.





Unalloyed steel wire rod for the manufacture of wire. Part 1: General requirements. (ISO 16120-1: 2011).





UNE-EN 10016-1: 1995.






UNE-EN ISO 16120-2: 2012.





Unalloyed steel wire rod for the manufacture of wire. Part 2: Specific requirements for general purpose wire rod. (ISO 16120-2: 2011).





UNE-EN 10016-2: 1995.






UNE-EN ISO 16120-3: 2012.





Unalloyed steel wire rod for the manufacture of wire. Part 3: Specific requirements for rimmed steel wire rod and low carbon pseudoefervescente. (ISO 16120-3: 2011).





UNE-EN 10016-3: 1995.






UNE-EN ISO 16120-4: 2012.





Unalloyed steel wire rod for the manufacture of wire. Part 4: Specific requirements for wire rod for special applications. (ISO 16120-4: 2011).





UNE-EN 10016-4: 1995.






UNE-EN ISO 19118: 2012.





geographic information. Coding. (ISO 19118: 2011).





UNE-EN ISO 19118: 2009.






UNE-EN ISO 23640: 2012.





medical devices for in vitro diagnosis. Evaluation of stability of in vitro diagnostic reagents. (ISO 23640: 2011).





UNE-EN 13640: 2002.






UNE-EN ISO 26985: 2012.





Resilient floor coverings. Identification of linoleum and determination of cement content and ash rate. (ISO 26985: 2008).





UNE-EN 670: 1997.






UNE-HD 60364-7-701: 2009 / A11: 2012.





Low voltage electrical installations. Part 7-701: Requirements for special installations and locations. Locations containing a bath or shower.












UNE-ISO 2859-2: 2012.





Sampling procedures for inspection by attributes. Part 2: Sampling plans for inspections of independent lots, tabulated according to the quality limit (CL).





UNE 66020-2: 2001.






UNE-ISO 22197-1: 2012.





technical ceramics (advanced ceramics, advanced technical ceramics). Test methods for the operation of semiconductor materials for photocatalytic air purification. Part 1: Removal of nitric oxide.












UNE-ISO / TR 230-8: 2012.





Machines tools. Verification code to machine tools. Part 8: Vibrations.