Resolution Of 13 February 2015, Of The Directorate-General Of Employment, Which Is Recorded And Published The Minutes Of Changes In Salary And Definitions Of Various Categories Of Professionals, Relevant To The Assessment Of The Second...

Original Language Title: Resolución de 13 de febrero de 2015, de la Dirección General de Empleo, por la que se registra y publica el Acta de las modificaciones de nivel salarial y definiciones de varias categorías profesionales, correspondientes a la valoración del segund...

Read the untranslated law here:

Seen the text of the Act where approve changes to salary level and definitions of various categories of professionals, relevant to the assessment of the second half of 2010 the company Fábrica Nacional de Moneda y Timbre - Real Casa de la Moneda (Convention No. 90002052011987 code) Act which was signed on November 27, 2014 by the Mixed Commission of appraisal which are part representatives of the management of the company and the Committee of company in representation of the entity and of them workers of the same, to which is accompanies report favorable issued by the Ministry of Hacienda and administrations public (Commission Executive of the Commission inter-ministerial of remuneration), in compliance to it planned in the Law 26 / 2014, of 26 of December, of budgets General of the State for 2015 and of conformity with it willing in the article 90 paragraphs 2 and 3, of the law of the Statute of workers, revised text approved by Royal Legislative Decree 1/1995 of 24 March, and in Royal Decree 713/2010, 28 of may, on registration and deposit agreements and collective labour agreements, this General Directorate of employment meets: first.

Order the registration of the above-mentioned Act in the corresponding register of conventions and collective agreements of work with performance through electronic means from this Management Centre, with notification to the Committee negotiating with the warning of forced compliance of law 26/2014, on December 26, from the State budget for the year 2015 , in the execution of such agreements.


Have your publication in the «Official Gazette».

Madrid, 13 of February of 2015.-the Director General of employment, Xavier Jean Braulio Thibault Aranda.

Representatives of the Directorate FINAL ACT: Doña Marta Bedoya Castro.

Don Fernando Wolf of God (Advisor).

Employee representatives: Don Juan Manuel Díaz camera.

Don José Luis Díaz-Jerez (Advisor).

In Madrid, on November 27, 2014, cited the joint assessment Committee members gather aside, making this final act, where gathered the results of assessment of the jobs for the second half of 2010.

Posts valued or revised to request of the departments put that rise of level: Personal operator.

Machinist of finished machines. Bell: 9. Officer 1st Team Manager of machine typographic values 2 + colors. Documents of value: 10.

Jobs not climbing level: Personal operator.

Machinist equipment cutting head and Enfajado. Bell: 9. jobs reviewed by claim of its occupants.

Posts that do not rise level.

Personal operator.

Assistant slitter of finishes. Factory: 7. Assistant manufacturing paper machine. Factory: 8. Assistant Encolado-Calandra paper machine. Factory: 7. multi-purpose machine Assistant. Factory: 8. driver crew chief paper machine. Factory: 10.

Cutting machine engineer of finishes. Factory: 9. Officer 1st print Quimigrafico and rotogravure. Prepress: 10.

Posts reviewed at the request of the departments without agreement on some Personal operator factor: official 1st head of printing equipment. Ringer.

Official 2nd of printing. Ringer.

Official 2nd machine typographic values 2 + colors. Documents of value.

Them following positions of work not is have valued by not exist agreement concerning if the claim presented implies or not a review of the valuation of them themselves, according to is reflects in them records daily.

Translator. Services General. Resource human.

Machinist of Fresado-Encartado cards smart. Imprint according to is collected on 9th of the current collective agreement article, jobs in disagreement shall be subject to arbitration, remembering that Provincial Labour Inspectorate is who carry it out, accepting both representations of the report issued by the Inspectorate. These posts are: official 1st head of printing equipment. Ringer.

Official 2nd printing. Ringer.

Officer 2nd machine values 2 + colors. Documents of value.

Translator. General Services. Human resources.

Fresado-Encartado smart card driver. Printing.


Categories that disappear: Programmer's desktop. Systems of information.

Operator computer in management. Systems of information.

Official 1st binding. Printing.

Official 2nd binding. Printing.

Officer 1st team Encuadernacion-jefe machine binding. Printing.

Officer 1st bookbinding-machine brake. Printing.

Officer 1st bookbinding-machine cross stitch. Printing.

Operator manufacturing DNI guillotine. Printing.

Manufacture ID operator. Printing.

PVC cards laser numbered Machinist. Printing.

Relationship of people and date: internally is made public on the premises of the FNMT - RCM, the relationship of the staff affected by the present review and the implementation dates.

All assessments will be applied one time mandatory ministerial authorization is obtained and published in the official bulletin of the State as an integral part of the collective agreement with the effects of the above implementation dates.

Machinery Machinist of completed: is the operator driving the machines with full knowledge of his profession of finished that they are assigned. It must be preparation, procurement, commissioning up machine, precise adjustments, monitoring of the different phases of the process, resolution of incidences and attention to auxiliary devices including control and safety, being responsible for a correct quality and production. For which carry out the following functions: preparation and implementation of the assigned machine: slitter, tags form, form of pay stubs or line of die-cut and laminated side, regulating and checking the correct functioning of all its elements.

Machine provisioning, loading materials and coils and threaded paper. Introduction of the data of the work to be carried out or the corresponding file selection, making checks and adjustments.

Supervision and care of the machine during the circulation, solving any incidents that may arise.

Removal of the finished work, packaging and labeling it according to the established rules, carrying out controls, needed corrections, annotations and revisions.

Realization of work changes. Cleaning of all the elements of machine and its area of action, as well as its entertainment, resolution of small faults, spare parts mounting and replacement of consumables, helping maintenance personnel in repairs, whenever required.

Filling out all the forms that are required relating to their work.

Official 1st Chief of team machine typographic 2 or + colors: is the operator that, with total knowledge of your profession and capacity of coordination, leads all type of machines of printing typographic and varnished, must make the mix of colors, footwear and arrangement of beds, mounting and adjustment of plates, cylinders, numerators, rubbers, anilox, cameras of varnish and device of drying , attending to them systems auxiliary, included them of control and security, and them settings necessary of all its elements in order to print and varnishing all type of works, according to the requirements of the product finished. For which will take to out them following functions: procurement of materials raw, auxiliary and products necessary for the printing and varnished, proceeding to its placement, a time finished the work, in them places established.

Preparation and implementation of the machines, by introducing the necessary parameters, making checks and adjustments, are responsible including cells, inks with special features and system of varnish to obtain a correct quality and production, Chuck.

Care and management of the systems of pre-screening of numeration, in his case, connection and adjustment of readers check contactors, rings, collector, etc., in order to resolve any incidents that occur. If necessary, calculates the control code of the numbering by using the tools available. Attention to the system of painting.

Realization of work changes and performance of maintenance (preventive and corrective) established, as well as the cleaning of all the elements of the machine and its area of action, helping maintenance personnel in repairs, whenever required.

Verification of printing during the circulation according to the guidelines of self-control, correcting the anomalies detected. Checking and care of the machine vision system, making the necessary adjustments. Checking and automatic sheets, load and data validation control system attention and resolution of incidents. Filling in the forms of control that will be required relating to their work.

Theoretical and practical training of the staff in charge, solving all questions that may arise them in the development of their work.

Coordination of its operators, and must replace any of them, if necessary, during the breaks established throughout the work day.

At the request of his superiors, inform, verbally or in writing, on issues within its competence.

Engineer Chief of equipment machine cutting and Enfajado:

It is the operator who, with full knowledge of the machine and coordination ability, leads a cutting machine and banding of all kinds of effects, as well as any conventional guillotine. Must perform the programming and put punto of the machine and of all them systems auxiliary, included them of control and security, in order to cut, bind, remove, fit and palletizing any type of work, in accordance with them demands of the product finished. For which carry out the following functions: procurement, preparation and withdrawal of paper and auxiliary materials, maintaining the required order of the different effects, stack or cut reams and introducing changes or necessary control specifications.

Preparation and programming of each one of them bodies of the machine, solving them interference that is produced and being responsible of the obtaining of a correct quality and production.

Realization of changes in work and settings required for each work in any of the bodies of the machine, selecting programs, changing parameters, replacing blades and other actions that may be required.

Realization of quality controls in accordance with the established guidelines, filling in documents and forms of control required in relation to their work.

Coordination and supervision of the work of the endowment of the machine, making them substitutions necessary, during them periods of rest established along the day of work.

Entertainment machines and cleaning of all its elements and area of action, resolution of small failures, replacement and installation of spare parts, helping maintenance personnel, whenever required.