Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1995 ("Official State Gazette", No. 32, of 6 February 1996) and having regard to the file of the rules approved by the Spanish Association for Standardisation and Certification, an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, according to the Royal Decree 1614/1985 of 1 August 1985 and recognized by the additional provision of Royal Decree 2200/1995 of 28 December
,This Directorate General has decided to publish in the "Official State Gazette" the relationship of Spanish standards UNE approved by the Spanish Association for Standardisation and Certification, corresponding to the month of January 2015, identified by its title and numerical code, which is listed as an annex to this resolution.
This resolution will cause effect from the day following its publication in the "Official State Bulletin".
Madrid, 11 February 2015. -Director General of Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Edited rules in the month of January 2015
Title | |||
---|---|---|---|
UNE 84308:2015 | Essential Oils. Spain's essential improvement oil (Thymus mastichina L.). | UNE 84308:2008 | |
84702:2015 | Cosmetic Raw Materials. Toothpaste. Determination of the fluoride content of sodium fluoride and sodium monofluorphosphate. | UNE 84702:2005 | |
92305:2015 |
Measurement criteria for dry and false roofing installation jobs. | UNE 92305:2002 | |
149101:2015 | Water conditioning equipment inside the buildings. Basic fitness criteria for equipment and components used in the treatment of human consumption water in the interior of buildings. | UNE 149101:2011 | |
UNE 155509-3:2015 | Fresh Fruit. Controlled production. Kiwi produced incorporating biological control methods against pests. Series III. |
| |
178301:2015 | Smart Cities. Open Data (Open Data). |
| |
201010:2015 | Reaction to Fire Tests low voltage electrical fittings. Classification by the radiation test applicable to rigid materials. |
| |
UNE-CEN/TR 12108:2015 IN | Pipeline Systems in Plastic Materials. Recommended practice for the installation inside the structure of the building of hot and cold water pressure channeling systems intended for human consumption. | UNE-ENV 12108:2002 UNE-ENV 12108:2002 ERRATUM: 2011 | |
UNE-CEN/TR 16364:2015 IN | Influence of materials in water for consumption human. Influence due to migration. Predicting migration from organic materials using mathematical models. |
| |
UNE-CEN/TS 115 -4:2015 | Security of escalators and mobile platforms. Part 4: Interpreters regarding family rules EN 115. |
| |
UNE-CEN/TS 1555-7:2015 | Pipeline systems in plastic materials for the supply of gaseous fuels. Polyethylene (PE). Part 7: Guide to conformity assessment. | UNE-CEN/TS 1555-7:2004 | |
UNE-CEN/TS 16011:2015 EX | Plastics. Recycled plastics. Preparing samples. |
| |
UNE-CEN/TS 16621:2015 EX | Analysis of Foodstuffs. Determination of benzo (a) pyrene, benzo (a) anthracene, chrysine and benzo (b) fluoranthene in food products by high resolution liquid chromatography with fluorescence detection (HPLC-FD). |
| |
UNE-EN 327:2015 | Heat exchangers. Forced convection aerocapacitors for refrigeration. Test procedure to determine its capabilities. | UNE-EN 327:2001 UNE-EN 327/A1:2003 | |
UNE-EN 12320:2015 | Building hardware. Padlocks and padlocks for padlocks. Testing requirements and methods. | UNE-EN 12320:2001 | |
UNE-EN 12341:2015 | Air environment. Standard gravimetric measurement method for the determination of the PM10 or PM2.5 mass concentration of the particulate matter in suspension. | UNE-EN 12341:1999 UNE-IN 14907:2006 | |
UNE-EN 12561-3:2012/AC: 2015 | Railway Applications. Tank wagons. Part 3: Fill and flush devices by the bottom for liquefied gases under pressure. |
| |
UNE-EN 12811-4:2015 | Equipment for Work Temporary Jobs. Part 4: Protection visas for scaffolding. Product design and behavior requirements. |
| |
UNE-EN 12945:2015 | Amendments beacons. Determination of the neutralization value. Volumetric Methods. | UNE-EN 12945:2008 UNE-EN 12945 :2008/AC: 2009 | |
UNE-EN 13001-2:2015 |
Safety of the cranes. General design requirements. Part 2: Load actions. | UNE-EN 13001-2:2011 | |
UNE-EN 13001-3-2:2015 | Security of the cranes. General design requirements. Part 3-2: Limit states and fitness test for metal cables in hoists. | UNE-CEN/TS 13001-3-2:2009 EX | |
UNE-EN 13445-1:2015 | Uncalled pressure-ins. Part 1: Generalities. | UNE-EN 13445-1:2010 UNE-EN 13445-1:2010/A1:2014 | |
UNE-EN 13445-2:2015 |
Non-called pressure startups. Part 2: Materials. | UNE-EN 13445-2:2010 UNE-EN 13445-2:2010/A1:2012 UNE-EN 13445-2:2010/A2:2012 | |
UNE-EN 13445-6:2015 | Uncalled pressure-ins. Part 6: Additional requirements for the design and manufacture of pressure vessels and pressure-subjected parts made of spheroidal graphite cast iron. | UNE-EN 13445-6:2010 | |
UNE-EN 13445-8:2015 | Non-called pressure-ins. Part 8: Additional requirements for aluminum pressure vessels and aluminum alloys. | UNE-EN 13445-8:2010 | |
UNE-EN 14407:2015 | Water quality. Guide for the identification and counting of benthic river and lake diatomeas samples. | UNE-EN 14407:2005 | |
UNE-EN 15040:2015 |
Chemicals used in the treatment of water intended for human consumption. Anti-fouling products for membranes. Phosphonic acids and their salts. | UNE-EN 15040:2007 | |
UNE-EN 15041:2015 | Chemicals used in the treatment of water intended for human consumption. Anti-fouling products for membranes. Polyphosphates. | UNE-EN 15041:2007 | |
UNE-EN 15346:2015 | Plastics. Recycled plastics. Characterization of recycled poly (vinyl chloride) (PVC). | UNE-EN 15346:2008 | |
UNE-EN 15348:2015 | Plastics. Recycled plastics. Characterization of recycled poly (ethylene terephthalate) (PET). | UNE-EN 15348:2008 | |
UNE-EN 15513:2015 | Chemicals used in the treatment of swimming pools water. Carbon dioxide. | UNE-EN 15513:2008 | |
UNE-EN 15684:2015 | Building hardware. Mechatronic cylinders. Testing requirements and methods. |
| |
UNE-EN 15752-1:2015 | Glass for Building. Adhesive polymer sheet. Part 1: Definitions and Requirements. |
| |
UNE-EN 15755-1:2015 | Glass for Building. Glass with adhesive polymer sheet. Part 1: Definitions and requirements. |
| |
UNE-EN 16070:2015 | Chemicals used for the treatment of water intended for human consumption. Natural zeolite. |
| |
UNE-EN 16340:2015 | Control and Security Devices for burners and appliances using gaseous or liquid fuels. Combustion product detection devices. |
| |
UNE-EN 16472:2015 | Plastics. Accelerated photoaging method using mercury vapor lamps at medium pressure. |
| |
UNE-EN 16575:2015 |
Biological source products. Vocabulary. |
| |
UNE-EN 50238-1:2004/AC: 2015 | Railway Applications. Compatibility between rolling stock and train detection systems. Part 1: Generalities. | UNE-EN 50238:2004 CORR: 2010 | |
UNE-EN 60350-1:2014/A11:2015 | Appliances Cooking appliances. Part 1: Cocias, ovens, steam ovens and gratiners. Methods of measurement of fitness to function. |
| |
UNE-EN 60350-2:2014/A11:2015 | Appliances Cooking appliances. Part 2: Countertops. Methods of measurement of fitness to function. |
| |
UNE-EN 60661:2015 | Methods of measurement fitness for the function of electric coffee makers for domestic use. |
| |
UNE-EN 60705:2013/A1:2015 | Microwave ovens for home use. Fitness measurement methods for the function. |
| |
UNE-EN 60745-2-3:2011/A12:2015 | Electrical manual tools powered by electric motor. Security. Part 2-3: Particular requirements for amolators, pulidoras, and disk livers. |
| |
UNE-EN 60950-1:2007/A2:2015 |
Information technology teams. Security. Part 1: General requirements. |
| |
UNE-EN 61196-10-1:2015 | Coaxial Cables communication. Part 10-1: White detail specification for semi-rigid cables with polytetrafluoroethylene dielectric (PTFE). |
| |
UNE-EN 62196-1:2012/A12:2015 | Bases, pins, vehicle connectors, and vehicle entries. Conductive load of electric vehicles. Part 1: General requirements. |
| |
UNE-EN 62198:2015 | Project risk management. Application guidelines. |
| |
UNE-EN 62271-202:2015 | High voltage appliance. Part 202: High voltage/low voltage prefabricated transformation centers. |
| |
UNE-EN 62290-1:2015 | Railway Applications. Management of urban guided transport and control/control systems. Part 1: System principles and fundamental concepts. |
| |
UNE-EN ISO 844:2015 | rigid cellular plastic materials. Determining the compression characteristics. | UNE-EN ISO 844:2010 | |
UNE-EN ISO 3949:2015 | Plastic sleeves and hose assemblies with join accessories. Types of textile reinforcement for hydraulic applications. Specifications. (ISO 3949:2009). | UNE-EN 855:1996 UNE-EN 855:1997 ERRATUM | |
UNE-EN ISO 4064-1:2015 | Water counters for drinking cold water and hot water. Part 1: Metrological and technical requirements. (ISO 4064-1:2014). |
| |
UNE-EN ISO 4210-6:2015 | Cycles. Safety requirements for bicycles. Part 6: Test methods of the table and the fork. (ISO 4210-6:2014, Corrected Version 2014-11-01). |
| |
UNE-EN ISO 4210-7:2015 | Cycles. Safety requirements for bicycles. Part 7: Test methods for wheels and rims. (ISO 4210-7:2014). |
| |
UNE-EN ISO 4210-8:2015 | Cycles. Safety requirements for bicycles. Part 8: Test methods for the pedals and the transmission system. (ISO 4210-8:2014, Corrected Version 2014-11-01). |
| |
UNE-EN ISO 4210-9:2015 | Cycles. Safety requirements for bicycles. Part 9: Test methods for saddles and saddles. (ISO 4210-9:2014). |
| |
UNE-EN ISO 6185-3:2015 | pneumatic vessels. Part 3: Embarations with a length of less than 8 m and with an engine power of 15 kW or more. (ISO 6185-3:2014). |
| |
UNE-EN ISO 6506-1:2015 | Metal Materials. The Brinell hardness test. Part 1: Test method. (ISO 6506-1:2014). | UNE-EN ISO 6506-1:2006 | |
UNE-EN ISO 6506-2:2015 | Metal Materials. The Brinell hardness test. Part 2: Verification and calibration of test machines. (ISO 6506-2:2014). | UNE-EN ISO 6506-2:2007 | |
UNE-EN ISO 6506-3:2015 | Metal Materials. The Brinell hardness test. Part 3: Calibration of the pattern blocks. (ISO 6506-3:2014). | UNE-EN ISO 6506-3:2007 | |
UNE-EN ISO 6506-4:2015 | Metal Materials. The Brinell hardness test. Part 4: Table of hardness values. (ISO 6506-4:2014). | UNE-EN ISO 6506-4:2007 | |
UNE-EN ISO 6806:2015 | Elastomers and Elastomers their assemblies with attachment fittings for use in fuel burners. Specification. (ISO 6806:2014). | UNE-EN ISO 6806:1996 | |
UNE-EN ISO 6974-5:2015 | Natural gas. Determination of the composition and the uncertainty associated with gas chromatography. Part 5: Isothermal method for nitrogen, carbon dioxide, hydrocarbons C1 through C5 and C6 +. (ISO 6974-5:2014). | UNE-EN ISO 6974-5:2003 | |
UNE-EN ISO 8030:2015 | Mangueras based on elastomers and plastics. Flammability test method. (ISO 8030:2014). | UNE-EN ISO 8030:1998 | |
UNE-EN ISO 10297:2015 | Bottles for Transport gas. Bottle valves. Specifications and type tests. (ISO 10297:2014, corrected version 2014-11-01). | UNE-EN ISO 10297:2006 | |
UNE-EN ISO 11357-2:2015 | Plastics. Scanning differential calorimetry (DSC). Part 2: Determination of the glass transition temperature and the height of the glass transition step. (ISO 11357-2:2013). |
| |
UNE-EN ISO 11357-5:2015 | Plastics. Scanning differential calorimetry (DSC). Part 3: Determination of the temperatures and characteristic times of the reaction curve, the enthalpy of the reaction and the degree of conversion. (ISO 11357-5:2013). |
| |
UNE-EN ISO 11358-1:2015 | Plastics. Thermogravimetry (TG) of polymers. Part 1: General principles. (ISO 11358-1:2014). | UNE-EN ISO 11358:1997 | |
UNE-EN ISO 12625-3:2015 | Paper tissue and products tissue. Part 3: Determination of thickness, medium thickness and apparent density and apparent specific volume. (ISO 12625-3:2014). | UNE-EN ISO 12625-3:2006 | |
UNE-EN ISO 12625-7:2015 | tissue and products Of tissue. Part 7: Determination of optical properties. Measurement of whiteness and colour with illuminating D65/10 ° (exterior daytime light). (ISO 12625-7:2014). | UNE-EN ISO 12625-7:2008 | |
UNE-EN ISO 12631:2015 | Thermal light facades. Calculation of the thermal transmittance. (ISO 12631:2012). | UNE-EN 13947:2011 | |
UNE-EN ISO 16559-2015 | Solid biofuels. Terminology, definitions and descriptions. (ISO 16559:2014). | UNE-EN 14588:2011 | |
UNE-EN ISO 17405:2015 | Non-destructive testing. Ultrasound test. Technique for testing of platelets performed by welding, lamination or explosion. (ISO 17405:2014). |
| |
UNE-EN ISO 22300:2015 | Protection and Security of Citizens. Terminology. (ISO 22300:2012). | UNE-ISO 22300:2013 | |
UNE-EN ISO 22301:2015 | Protection and Security of citizens. Business Continuity Management System. Specifications. (ISO 22301:2012). | UNE-ISO 22301:2013 | |
UNE-EN ISO 22313:2015 | Protection and Security of citizens. Business Continuity Management System. Guidelines. (ISO 22313:2012). | UNE-ISO 22313:2013 | |
-ISO 801-2:2015 | Pastas. Determination of the commercial mass of a lot. Part 2: Pastas (such as flash dried pastes) packed in blocks. | UNE 57015 -2:1991 | |
-ISO 1138:2015 | Ingredients of rubber mixtures. Carbon black. Determination of total sulfur content. | UNE 53559:1995 | |
-ISO 2781:2015 | Rubber vulcanised or thermoplastic. Determining density. | UNE 53526:2001 | |
-ISO 4046-4:2015 | Paper, cardboard, pastes, and related terms. Vocabulary. Part 4: Paper and cardboard calities and manipulated products. | UNE 57003-1:1978 UNE 57064:1985 UNE 57069-1:1974 UNE 57003-2:2005 UNE 57003-3:2008 | |
-ISO 5631-1:2015 | Paper and cardboard. Colour determination by diffuse reflectance. Part 1: Indoor lighting conditions (C/2º). |
| |
-ISO 14785:2015 | Offices of tourist information. Attention and tourism information services. Requirements. | UNE 187003:2008 | |
-ISO 15671:2015 | Caucho and rubbers additives. Determination of total sulfur content using an automatic analyzer. |
| |
-ISO 16110-1:2015 | Hydrogen Generators that use fuel processing technologies. Part 1: Security. |
| |
-ISO 16422:2015 | poly (vinyl chloride) pipes and joins oriented (PVC-O) for pressure water conduction. Specifications. | UNE-ISO 16422:2008 | |
-ISO 16945:2015 | Paper for Ondular. Determination of the crush resistance on the singing after undulation in the laboratory. |
|