Resolution Of February 11, 2015, Of The Directorate General Of Industry And Small And Medium-Sized Enterprises, Which Publishes The Relationship Of European Standards Which Have Been Ratified During The Month Of January 2015 As Spanish Standards.

Original Language Title: Resolución de 11 de febrero de 2015, de la Dirección General de Industria y de la Pequeña y Mediana Empresa, por la que se publica la relación de normas europeas que han sido ratificadas durante el mes de enero de 2015 como normas españolas.

Read the untranslated law here: http://www.boe.es/buscar/doc.php?id=BOE-A-2015-3157

In compliance with the provisions of article 11, f), the regulation of infrastructure for quality and Industrial Security, approved by Royal Decree 2200 / 1995 of 28 December, ("Official Gazette", no. 32, dated February 6, 1996) and views of the standards developed by the agencies European of standardisation CEN, CENELEC, ETSI and whose national transposition corresponds to the Spanish Association for standardisation and certification , entity designated by order of the Ministry of industry and energy of 26 of February of 1986, in accordance with the Real Decree 1614 / 1985, of 1 of August, and recognized to these effects by the available additional first of the quoted Real Decree 2200 / 1995, of 28 of December, this address General has determined publish in the «Bulletin official of the State», the relationship of standards European that have been ratified as standards Spanish during the month of January of 2015 identified by his title and code number, with an indication of the date of availability, appearing as an annex to the present resolution.

Madrid, 11 of February of 2015.-the Director General of industry and of the small and medium enterprise, Victor Audera Lopez.

ANNEX ratification of European standards. January 2015 code title F. Disponib.





Voids in 60068-2-75:2014 environmental tests. Part 2: Tests. Test Eh: trials of hammers.





2014-10-24 IN 60099-4:2014 lightning rod. Part 4: Lightning rod of metal oxide without blasting machines for alternating current systems.





2014-09-12 AT 60099-9:2014 lightning rod. Part 9: Lightning rod of metal oxide blasting machines for stations without converter HVDC 2014-09-12 IN 60127-2:2014 fuses miniature. Part 2: fuses of cartridge.





2014-10-24 IN 60127-6:2014 fuses miniature. Part 6: joint carriers for fuses miniature 2014-10-24 IN 60269-1:2007 / A2: 2014 fuses for low voltage. Part 1: General rules.





2014-09-05 IN 61169-49:2014 RF connectors. Part 49: Particular specification for SMAA series coaxial connectors of radiofrequency 2014-11-21 IN 61300-3-14:2014 fiber interconnect devices passive optics and components. Basic test and measurement procedures. Part 3-14: Inspections and measures. Error and repeatability of the positions of a variable Optical Attenuator for 2014-11-28 IN 61300-3-51:2014 fiber interconnect devices passive optics and components. Basic test and measurement procedures. Part 3-51: Inspections and measurements. Extraction force of snap guidance for connectors multi-fiber rectangular Cap 2014-11-21 IN 61577-3:2014 radiation protection instrumentation. Instruments of measurement of radon and radon decay products. Part 3: Specific requirements for the measurement of the products of disintegration of radon 2014-12-05 IN 61577-4:2014 radiation protection instrumentation. Instruments of measurement of radon and radon decay products. Part 4: equipment for the production of atmospheres of reference that contain isotopes of radon and its products of disintegration (STAR) 2014-12-05 IN 62701:2014 fluids for applications Electrotechnical. Oil insulating mineral recycled for transformers and switchgear.





2014-11-14 IN ISO 9680:2014 dentistry. Lamps dental (ISO 9680:2014) 2014-10-29 LINKS-IN ISO 9680:2007 IN ISO 10360-8:2013 specification geometric shapes of products (GPS). Trials of acceptance and of re-verification for systems of measurement for coordinates (SMC). Part 8: CMMS with sensors of distance optical (ISO 10360-8:2013) 2013-12-04 IN ISO 10360-9:2013 specification geometric shapes of products (GPS). Trials of acceptance and periodic verification of coordinate measuring machines (CMM). Part 9: MMC with systems of probing multiple (ISO 10360-9:2013) 2013-12-18 IN ISO 10579:2013 geometric specification of products (GPS). Dimensions and tolerances. Non-rigid parts (ISO 10579:2010, Cor 1:2011 included) 2013-07-31 EN ISO 14253-1:2013 geometrical products specification (GPS). Inspection by measuring parts and measuring equipment. Part 1: Rules of decision to prove the conformity or non-conformity with specifications. (ISO 14253-1:2013) 2013-09-04 UNE-EN ISO 14253-1:1999 EN ISO 16610-71:2014 technical specification (GPS) products. Filtration. Part 71: Robust surface filters: filters regression Gaussian (ISO 16610-71:2014) 2014-09-24 IN ISO 22311:2014 protection and security of citizens. Video surveillance. Interoperability of export (ISO 22311:2012) 2014-11-05 EN ISO 25178-70:2014 geometrical products specification (GPS). Surface quality: Areas. Part 70: Measures materialized (ISO 25178-70:2014) 2014-02-19 EN ISO 25178-603:2013 geometrical products specification (GPS). Surface quality: Areas. Part 603: features nominal of those instruments without contact (microscopes interferometric of displacement of phase) (ISO 25178-603:2013) 2013-10-02 IN ISO 25178-604:2013 specification geometric of products (GPS). Quality surface: Areas. Part 604: features ratings of those instruments without contact (interferometry by sweep) (ISO 25178-604:2013) 2013-08-07 IN ISO 25178-605:2014 specification geometric of products (GPS). Quality surface: Areas-part 605: features ratings of instruments without contact (point autofocus) (ISO 25178-605:2014) 2014-01-22