Resolution Of 26 Of January Of 2015, Of The Address General Of Industry And Of The Small And Medium Company, By Which Is Publishes The Relationship Of Standards Une Approved By The Association Spanish Of Normalization And Certification During The Month...

Original Language Title: Resolución de 26 de enero de 2015, de la Dirección General de Industria y de la Pequeña y Mediana Empresa, por la que se publica la relación de normas UNE aprobadas por la Asociación Española de Normalización y Certificación durante el mes de ...

Read the untranslated law here: http://www.boe.es/buscar/doc.php?id=BOE-A-2015-3156

(In compliance of it willing in the article 11, f), of the regulation of the infrastructure for the quality and security Industrial, approved by Real Decree 2200 / 1995, of 28 of December, («Bulletin official of the State», no. 32, of 6 of February of 1996) and seen the record of them standards approved by the Association Spanish of standardization and certification, entity designated by order of the Ministry of industry and energy of 26 of February of 1986 , in accordance with the Royal Decree 1614 / 1985, of 1 August, and recognized by the first additional provision of the aforementioned Royal Decree 2200 / 1995 of 28 December, this General direction has resolved to publish in the «Official Gazette», the relationship of Spanish standards UNE approved by the Spanish Association for Standardization, for the month of December 2014 , identified by its title and code number, that figure as annex to the present resolution.

This resolution will cause the effect from the day following its publication in the "Official Gazette".

Madrid, 26 January 2015.-the Director-General of industry and small and medium-sized enterprises, Víctor Audera López.

ANNEX rules published in the month of December of 2014 code title replaces to UNE 27250:2014 construction and repair naval civil. Components standard. Register oval with coaming.





 






UNE 27252:2014 construction and civil ship repair. Components standard. Registration oval flush.





 






UNE 27253:2014 construction and repair naval civil. Standardized components. Friezes for oval records.





 






UNE 27261:2014 construction and civil ship repair. Components standard. Registration circulate without coaming UNE 27263:2014 construction and civil ship repair. Components standard. Friezes for records circular.





 






UNE 27272:2014 construction and civil ship repair. Standardized components. Ladder for camera of machines (55 °).





 






UNE 27310:2014 construction and repair naval civil. Standardized components. Sleeves of steel for pipe joints.





 






UNE 27314:2014 construction and civil ship repair. Standardized components. Flat steel flanges to connect to butterfly valves.





 






UNE 27420:2014 construction and civil ship repair. Selective lists. Pipes and fittings: stretched steel pipe.





 






UNE 27421:2014 construction and civil ship repair. Selective lists. Pipes and fittings: steel welded pipe.





 






UNE 27422:2014 construction and civil ship repair. Lists selective. Pipes and fittings: pipe stretched from steel stainless.





 






UNE 27423:2014 construction and civil ship repair. Lists selective. Pipes and fittings: stainless steel pipe.





 






UNE 27426:2014 construction and civil ship repair. Selective lists. Pipes & fittings: copper tubes.





 






UNE 27430:2014 construction and civil ship repair. Selective lists. Pipes and fittings: elbows for steel pipe.





 






UNE 27431:2014 construction and civil ship repair. Selective lists. Pipes and fittings: steel pipe cuts.





 






UNE 27432:2014 construction and civil ship repair. Selective lists. Pipes and fittings: steel tubing T-pieces.





 






UNE 27441:2014 construction and civil ship repair. Selective lists. Pipes and fittings: steel sliding flanges.





 






UNE 27442:2014 construction and civil ship repair. Selective lists. Pipes and fittings: loose with ring flange.





 






UNE 27443:2014 construction and civil ship repair. Selective lists. Pipes and fittings: loose collar ring flange.





 






UNE 27445:2014 construction and civil ship repair. Selective lists. Pipes and fittings: steel with neck flanges for welding butt.





 






UNE 27480:2014 construction and repair naval civil. Lists selective. Pipes and accessories: tubes of steel stainless (ASTM-ANSI).





 






UNE 27482:2014 construction and repair naval civil. Lists selective. Pipes and accessories: tubes stretched from steel (ASTM-ANSI).





 






UNE 27483:2014 construction and civil ship repair. Selective lists. Pipes and accessories: sleeves of forged steel for pipe (ASTM-ANSI) joints.





 






UNE 27485:2014 construction and repair naval civil. Lists selective. Pipes and fittings: elbows for pipe of steel (ASTM-ANSI).





 






UNE 27486:2014 construction and repair naval civil. Lists selective. Pipes and accessories: reductions for pipe of steel (ASTM-ANSI).





 






UNE 27487:2014 construction and repair naval civil. Lists selective. Pipes and accessories: parts in T to pipe of steel (ASTM-ANSI).





 






UNE 27488:2014 construction and civil ship repair. Selective lists. Pipes and fittings: steel (ASTM-ANSI) sliding flange.





 






UNE 27489:2014 construction and civil ship repair. Selective lists. Pipes and fittings: steel with neck flanges for welding butt (ASTM-ANSI).





 






UNE 27490:2014 construction and civil ship repair. Selective lists. Pipes and fittings: pipe of polyester reinforced with fiberglass (GRP) (ASTM).





 






UNE 27491:2014 construction and civil ship repair. Selective lists. Pipes & fittings: copper-nickel (CUNI) (DIN) tubes.





 






UNE 27584:2014 construction and civil ship repair. Standardized components. Manguerotes and air vents: fixed grid of ventilation (area of passage free < 0.6 m2).





 






UNE 27587:2014 construction and civil ship repair. Standardized components. Registration for structural ventilation ducts.





 






UNE 27652:2014 construction and civil ship repair. Standardized components. Clamp plate.





UNE 27657-2:1977 UNE 27653:2014 construction and civil ship repair. Standardized components. Clamp for pipe carbon steel round.





 






UNE 27654:2014 construction and civil ship repair. Standardized components. Round stainless steel pipe clamp.





 






UNE 27657:2014 construction and civil ship repair. Standardized components. Pipe supports: support plate U -shaped pipe with clamp mounting plate.





UNE 27657-1:1977 UNE 27657-3-1977 UNE 27658:2014 construction and civil ship repair. Standardized components. Pipe supports: support of angular long pipe with clamp mounting plate.





UNE 27658:1978 UNE 27659:2014 construction and civil ship repair. Standardized components. Pipe supports: support of angular short pipe clamp mounting plate.





27659:1977 UNE UNE 27662:2014 construction and civil ship repair. Standardized components. Pipe supports: support mounting of one blade type 'or' pipe clamping mounting plate.





27662:1977 UNE UNE 27663:2014 construction and civil ship repair. Standardized components. Pipe supports: support plate of a pin type «A» for pipe clamping mounting plate.





UNE 27663:1977 UNE 27665:2014 construction and civil ship repair. Standardized components. Polin of angular long pipe clamping of round.





 






UNE 27666:2014 construction and civil ship repair. Standardized components. Support of angular short clamping of round pipe.





 






UNE 27670:2014






Construction and civil ship repair. Standardized components. Clamp for mounting plate for pipes of cupro-nickel (CUNI).





 






UNE 27671:2014 construction and civil ship repair. Standardized components. Support angle with clamp of plate for pipeline of cupro-nickel (CUNI).





 






UNE 27672:2014 construction and civil ship repair. Standardized components. Support in T with clamp of plate for pipeline of cupro-nickel (CUNI).





 






UNE 48103:2014 paints and varnishes. Color standard.





UNE 48103:2002 UNE 53016:2014 plastics. Determination of the factor of compression of the materials of mould.





UNE 53016:1982 UNE 54131-2:2014 requirements for the formalization of the technical characteristics of the printed graphic product, depending on its type, during the design process. Part 2: method for the formalization of the features technical of the products communication or advertising printed.





 






UNE 54131-3:2014 requirements for the formalization of the technical characteristics of the printed graphic product, depending on its type, during the design process. Part 3: Method for the formalization of the technical characteristics of the print publishing products.





 






UNE 54131-4:2014 requirements for the formalization of the technical characteristics of the printed graphic product, depending on its type, during the design process. Part 4: method for the formalization of the characteristics techniques of them products industrial printed.





 






UNE 56875:2014 kitchen furniture. Specifications, requirements and methods of test.





UNE 56841:2001 UNE 56842:2001 UNE 56843:2001 UNE 56842:2002 ERRATUM UNE 56875:2014 V2 furniture of kitchen. Specifications, requirements and test methods.





UNE 56875:2014 JOINS 60631-1:2014 stations of CNG for vehicles engine. Part 1: stations of capacity of supply superior to 20 m3 / h.





UNE 60631-1:2008 UNE 81599:2014 exposure in the workplace. Determination of particles suspended in the air (inhalable, thoracic and respirable fractions). Gravimetric method.





UNE 81599:1996 UNE 83980:2014 concrete durability. Test methods. Determination of the water absorption, the density and porosity of concrete water.





 






UNE 84610:2014 materials raw cosmetic. Isoestearilo Isoestearato.





UNE 84610:1996 UNE 84613:2014 materials raw cosmetic. Myristyl lactate.





UNE 84613:1996 UNE 84638:2014 materials raw cosmetic. Isopropyl Isoestearato.





UNE 84638:1998 UNE 171330-2:2014 indoor environmental quality. Part 2: procedures for inspection of quality environmental inside.





UNE 171330-2:2009 UNE 171370-1:2014 asbestos. Part 1: Qualification of companies who work with asbestos materials.





 






UNE 192001-10:2014 procedure of inspection in establishments affected by the regulation of accidents grave in which involved substances dangerous. Part 10: evaluation of the implementation of the plan of emergency inside.





 






UNE 212016:2014 Cables metal with elements multiple used for the transmission of data for tension lower or equal to 250 V.





EA 0016:2003 UNE-IN 81-22:2014 rules of safety for the construction and installation of lifts. Lifts for the transport of people and cargo. Part 22: lifts electric with trajectory angle.





 






UNE-IN 250:2014 equipment respiratory. Teams of diving autonomous of circuit of air open of air compressed. Requirements, testing and marking.





UNE-IN 250:2001 UNE-IN 250:2001 / A1: 2006 UNITES-IN 289:2014 machinery for plastics and rubber. Compression and transfer moulding machines. Requirements of security.





UNE-EN 289:2005 + A1:2008 UNE-EN 415-1:2014 safety of packaging machines. Part 1: Terminology and classification of packaging and associated equipment machines.





UNE-EN 415-1:2000 + A1:2009 UNE-EN 508-1:2014 roofing and sheet metal siding products. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Part 1: Steel.





UNE-EN 508-1:2010 UNE-EN 957-6:2011 + A1:2014 stationary equipment for training. Part 6: Career, specific safety requirements and test methods additional simulators.





UNE-EN 957-6:2011 UNE-EN 1143-2:2014 security storage units. Requirements, classification and methods of test for resistance to theft. Part 2: Deposit systems.





UNE-IN 1143-2:2002 UNE-IN 1325:2014 management of the value. Vocabulary. Terms and definitions.





UNE-IN 1325-1:1996 UNE-IN 1325-2:2005 UNE-IN 1400:2013 + A1: 2014 articles of childcare. Pacifiers for babies and children small. Safety requirements and test methods.





UNE-IN 1400:2013 UNE-IN 1514-2:2014 flanges and their joints. Measures of the joints for flanges designated by PN. Part 2: together in spiral for its use with flange of steel.





UNE-IN 1514-2:2005 UNE-IN 1809:2014 team of diving. Vest hydrostatic. Functional and test methods and safety requirements.





UNE-IN 1809:1998 UNE-IN 12021:2014 equipment of protection respiratory. Air compressed to teams of protective respiratory isolates.





UNE-IN 12021:1999 UNE-IN 12183:2014 chairs of wheels of powered manual. Requirements and test methods.





 






UNE-IN 12184:2014 chairs of wheels with motor electric, scooters and their Chargers. Requirements and test methods.





 






UNE-IN 12201-2:2012 + A1: 2014 systems of canalization in materials plastics for conduction of water and sanitation with pressure. Polyethylene (PE). Part 2: tubes.





UNE-IN 12201-2:2012 UNE-IN 12377:2014 containers and packaging. Tubes flexible. Test to verify the tightness to air sealing plugs.





UNE-EN 12377:2001 UNE-EN 12732:2014 + A1:2014 infrastructure gas. Welding of steel pipes. Functional requirements.





UNE-EN 12732:2014 UNE-EN 12873-1:2014 influence of materials on water intended for human consumption. Influence of migration. Part 1: Test method for materials of industrial manufacturing which are made of or contain materials organic or glassy (vitreous and porcelain enamels).





UNE-EN 12873-1:2004 UNE-EN 13000:2010 + A1:2014 suspended load lifting equipment. Mobile cranes.





UNE-EN 13000:2010 UNE-EN 13000:2010 ERRATUM:2010 UNE-EN 13451-10:2014 equipment for swimming pools. Part 10: Specific safety requirements and additional test methods to jump platforms, trampolines from jump and associated equipment.





UNE-EN 13451-10:2004 UNE-EN 13451-11:2014 equipment for swimming pools. Part 11: Specific safety requirements and test methods additional mobile floor pool and mobile panels.





UNE-EN 13451-11:2004 UNE-EN 13523-2:2014 metal painted in continuous band. Test methods. Part 2: Brightness.





UNE-EN 13523-2:2001 UNE-EN 13523-3:2014 metal painted in continuous band. Test methods. Part 3: Color difference. Instrumental comparison.





UNE-EN 13523-3:2001 UNE-EN 13523-4:2014 metal painted in continuous band. Test methods. Part 4: Hardness according to the method of the pencil.





UNE-EN 13523-4:2001 UNE-EN 13523-9:2014 metal painted in continuous band. Test methods. Part 9: Resistance to immersion in water.





UNE-EN 13523-9:2002 UNE-EN 13523-25:2014






Metal painted in band continues. Methods of test. Part 25: Resistance to humidity.





UNE-EN 13523-25:2007 UNE-EN 13946:2014 water quality. Guide for the sampling of routine and the pretreatment of diatoms benthic of rivers and lakes.





UNE-IN 13946:2004 UNE-IN 13963:2014 Material for together for plates of plaster. Definitions, specifications and test methods.





 






UNE-EN 14067-4:2014 railway applications. Aerodynamics. Part 4: Requirements and test procedures aerodynamic outdoors.





UNE-IN 14067-2:2003 UNE-IN 14067-4:2006 + A1: 2010 UNITES-IN 14116:2013 + A1: 2014 tanks for the transport of goods dangerous. Digital interface for device recognition of the product.





UNE-EN 14116:2013 UNE-EN 14122 permanent: 2014 foodstuffs. Determination of vitamin B1 by high performance liquid chromatography.





UNE-IN 14122:2003 UNE-IN 14122:2003 / AC: 2007 UNE-IN 14184:2014 quality of the water. Guide to the study of Aquatic Macrophytes in water courses.





UNE-IN 14184:2004 UNE-IN 14190:2014 transformed of plate from plaster laminated from of processes side. Definitions, specifications and methods of test.





 






UNE-EN 14420-3:2014 accessories for hoses with clamping elements. Part 3: Subject clamps with screws or pins UNE-EN 14420-3:2005 UNE-EN 14420-5:2014 accessories for hoses with clamping elements. Part 5: Threaded connections.





UNE-IN 14420-5:2005 UNE-IN 14420-7:2014 accessories for hoses with elements of fastening. Part 7: Cam links.





UNE-EN 14420-7:2005 + A1: 2007 UNE-EN 14427:2014 equipment and accessories for LPG. Bottles of composite material, portable and refillable, for liquefied petroleum (LPG) gas. Design and manufacture.





UNE-EN 14427:2004 UNE-EN 14427:2004 / A1: 2006 UNE-EN 14893:2014 equipment and accessories for LPG. Drums welded steel for transportation of liquefied petroleum (LPG) gas-pressurized with a capacity between 150 litres and 1 000 litres.





UNE-EN 14893:2008 UNE-EN 15039:2014 chemicals used for treatment of water intended for human consumption. Products anti-fouling for membranes. Polycarboxylic acids and their salts.





UNE-EN 15039:2007 UNE-EN 15051-1:2014 exposure in the workplace. Measure of the ability of bulk materials dust emission. Part 1: Requirements and test methods choice.





UNE-IN 15051:2007 UNE-IN 15051-2:2014 exhibition at the place of work. Measurement of the ability of emission of dust of those materials to bulk. Part 2: Method of rotary drum.





UNE-IN 15051:2007 UNE-IN 15051-3:2014 exhibition at the place of work. Measure of the ability of bulk materials dust emission. Part 3: Method of continuous fall.





UNE-EN 15051:2007 UNE-EN 15306:2014 sports surfaces from outside. Exhibition of artificial grass to the simulated use.





UNE-EN 15306:2008 UNE - EN 15383 + A1:2014 systems of canalization in plastics disposal and sanitation. Thermosetting plastics (GRP) glass-reinforced resin of unsaturated polyester (UP). Wells of registration and inspection Chambers.





 






UNE-EN 15458:2014 paints and varnishes. Laboratory method for testing the effectiveness of preservatives of a coating against algae film.





UNE-EN 15458:2008 UNE-EN 16247-2:2014 energy audits. Part 2: Buildings.





UNE 216501:2009 UNE-EN 16247-3:2014 energy audits. Part 3: Process.





 






UNE-EN 16247-4:2014 energy audits. Part 4: Transportation.





 






UNE-EN 16272-3-2:2014 railway applications. Via. Noise barriers and related devices which act on the airborne spread of the sound. Test method for determining the acoustic performance. Part 3-2: Spectrum of standard railway noise and unique number of classification for direct field applications.





 






UNE-EN 16317:2014 fertilizers. Trace element determination. Determination of arsenic by Atomic emission spectrometry with inductively coupled (ICP-AES), after dissolution in aqua regia plasma.





 






UNE-EN 16323:2014 glossary of technical terms of sewage.





 






UNE-IN 16350:2014 gloves for protection. Electrostatic properties.





 






UNE-EN 16413:2014 air quality. Bioseguimiento with lichens. Evaluation of the diversity of lichens epyphytic.





 






UNE-EN 16414:2014 air environment. Bioseguimiento with MOSS. Accumulation of contaminants atmospheric in mosses collected on site: from collection to sample preparation.





 






UNE-EN 16436-1:2014 hoses and tubes of elastomer and plastic used for propane, butane and their mixtures in vapor phase. Part 1: Hoses and tubes.





 






UNE-EN 16457:2014 characterization of waste. Framework for the development and implementation of a trial program. Objectives, planning and report.





 






UNE-IN 16479:2014 quality of the water. Requirements of operation and procedures of trials of compliance for the equipment of monitoring of waters. Devices automatic for the taking of samples (samplers) of water and water residual.





 






UNE-IN 16482:2014 cast. Bars of cast iron by casting continues.





 






UNE-IN 16492:2014 paints and varnishes. Evaluation of the disfigurement of the surface caused by fungi and algae on the coatings.





 






UNE-EN 16565:2014 containers and packaging. Flexible tubes. Test method for determining the orientation of the flip-top.





 






UNE-EN 16566:2014 paints and varnishes. Putties or PuTTY for Interior and exterior work. The putties or mastics adaptation to European standards.





 






UNE-EN 50050-1:2014 manual electrostatic spray equipment. Safety requirements. Part 1: Manual spray flammable liquid coating materials for equipment.





 






UNE-EN 50050-2:2014 manual electrostatic spray equipment. Safety requirements. Part 2: Manual spray for flammable powder coating equipment.





 






UNE-EN 50050-3:2014 manual electrostatic spray equipment. Safety requirements. Part 3: Manual for «flock» flammable spray equipment.





 






UNE-EN 50130-4:2011 / A1:2014 alarm systems. Part 4: Electromagnetic compatibility. Product family standard: requirements of immunity to components of detection systems fire, intrusion, robbery, CCTV, access control and alarm systems.





 






UNE-EN 50131-6:2008 / A1:2014 alarm systems. Intrusion and hold-up alarm systems. Part 6: Power supplies.





 






UNE-EN 50131-10:2014 alarm systems. Intrusion and hold-up alarm systems. Part 10: Specific application requirements for the transceivers of monitored installations (SPT) UNE-EN 50539-11:2013 / A1:2014 low voltage surge protection devices. Devices of protection against overvoltage transient to applications specific including current continuous. Part 11: requirements and tests for DPS in applications photovoltaic.





 






UNE-IN 50625-1:2014 requirements for the collection, logistics and treatment of the WEEE. Part 1: requirements General of treatment.





 






UNE-IN 55016-4-2:2012 / A1: 2014






Specification for the methods and devices of measure of them disturbances radio and of the immunity to them disturbances radio. Part 4-2: Uncertainties, statistics and limit modelling. Uncertainty of the instrumentation of measurement.





 






UNE-IN 60079-20-1:2014 atmospheres explosive. Part 20-1: Characteristics of the materials for the classification of gases and vapours. Methods and test data.





60079-20-1:2010 UNE-EN 60317-0-3:2008 / A1:2014 specifications for particular types of threads for electromagnetic coils. Part 0-3: requirements General. Circular cross-section aluminum enameled wire.





 






UNE-EN 60335-2-56:2005 / A2:2014 appliances and similar appliances. Security. Part 2-56: requirements particular to projectors and devices analogues.





 






UNE-EN 60335-2-101:2004 / A2:2014 appliances and similar appliances. Security. Part 2-101: Particular requirements for vaporizers.





 






UNE-IN 61400-23:2014 wind turbines. Part 23: testing structural of blades to scale real.





 






UNE-IN 62196-2:2012 / A12: 2014 Bases, plugs, connectors of vehicle and inputs from vehicle. Conductive charging of electric vehicles. Part 2: support dimensional and requirements of interchangeability for the accessories of spikes and alveoli in current AC.





 






UNE-EN 62196-3:2014 Bases, plugs, connectors of vehicle and vehicle entries. Load conductive of vehicles electric. Part 3: Dimensional compatibility and interchangeability requirements for couplers vehicle spikes and alveoli in DC and AC/DC.





 






UNE-EN 62586-2:2014 measure of the quality of supply in the energy supply systems. Part 2: Functional tests and requirements of uncertainty.





 






UNE-EN 62626-1:2014 under housing low-voltage switchgear. Part 1: switches low surround excluded of the field of application of the standard IEC 60947-3 for different applications, to provide an isolation of them equipment electrical during them works of repair and maintenance.





 






UNE-EN 62841-2-2:2014, semi-stable tools and gardening and lawn mowers, electric motor-driven machinery. Security. Part 2-2: Particular requirements for screwdrivers and impact wrenches portable UNE-EN 62841-2-4:2014, semi-stable tools and gardening and lawn mowers, electric motor-driven machinery. Security. Part 2-4: Particular requirements for Sanders and polishers laptops other than the disk.





 






UNE-EN 62841-2-5:2014, semi-stable tools and gardening and lawn mowers, electric motor-driven machinery. Security. Part 2-5: requirements particular to sierras circular portable.





 






UNE-EN 62841-3-6:2014, semi-stable tools and gardening and lawn mowers, electric motor-driven machinery. Security. Part 3-6: Particular requirements for semi-fixed diamond drills with liquid system UNE-EN 62929:2014 domestic cleaning Robots. Dry cleaning: methods of measurement of the ability to function.





 






UNE - EN ISO 105 - textile B01:2014. Color fastness tests. Part B01: Light color fastness: daylight. (ISO 105 - B01:2014)





UNE - EN ISO 105 - B01:2000 UNE-EN ISO 105 - textile B02:2014. Color fastness tests. Part B02: The colourfastness to artificial light: xenon lamp test. (ISO 105 - B02:2014).





UNE - EN ISO 105 - B02:2013 UNE-EN ISO 2440:2001 / A2:2014 polymeric materials cellular flexible and rigid. Accelerated ageing tests. Modification 2. (ISO 2440:1997 / AMD 2:2014).





 






UNE - EN ISO 2588:2014 leather. Sampling. Number of elements in the overall sample. (ISO 2588:2014).





UNE 59022:1982 UNE - EN ISO 3218:2014 essential oils. Principles of nomenclature. (ISO 3218:2014).





 






UNE-IN ISO 3233-2:2014 paints and varnishes. Determination of the percentage in volume of the matter not volatile. Part 2: method by the determination of the content of the matter not volatile according to the standard ISO 3251 and of the density of the film dry according to the principle of Archimedes in specimens painted.





 






UNE-IN ISO 3385:2014 materials polymer cell flexible. Determination of the fatigue by indentation to load constant. (ISO 3385:2014).





UNE-IN ISO 3385:1996 UNE-IN ISO 3994:2014 hoses of plastics. Hoses of materials thermoplastics with reinforcement thermoplastic coil for suction and download of materials aqueous. Specifications. (ISO 3994:2014).





UNE-IN ISO 3994:2012 UNE-IN ISO 4210-2:2014 cycles. Requirements of security for bicycles. Part 2: requirements for bike's ride, for adults young, of mountain and of racing. (ISO 4210-2:2014).





 






UNE-IN ISO 4210-3:2014 cycles. Requirements of security for bicycles. Part 3: Common test methods. (ISO 4210-3:2014).





 






UNE - EN ISO 4210-4:2014 cycles. Safety requirements for bicycles. Part 4: methods of test of braking. (ISO 4210-4:2014, Version corrected 2014-11-01).





 






UNE-IN ISO 4210-5:2014 cycles. Requirements of security for bicycles. Part 5: methods of test of the address. (ISO 4210-5:2014).





 






UNE - EN ISO 5163:2014 petroleum products. Determination of antiknock characteristics of automotive and aviation fuels. Engine method (ISO 5163:2014) UNE - EN ISO 5163:2006 UNE-EN ISO 5163:2006 / AC: 2009 UNE - EN ISO 5164:2014 petroleum products. Determination of antiknock characteristics of fuels. Method of research. (ISO 5164:2014).





UNE-EN ISO 5164:2006 UNE - EN ISO 5555:2002 / A1:2014 oils and fats of animal and vegetable origin. Sampling. Modification 1: flexible tanks. (ISO 5555:2001 / Amd 1:2014).





 






UNE - EN ISO 8330:2014-based elastomers and plastic hoses and their sets with union fittings. Vocabulary. (ISO 8330:2014).





UNE-EN ISO 8330:2008 UNE-EN ISO 8871-2:2005 / A1:2014 elements elastomeric for parenteral products and pharmaceutical products. Part 2: Identification and characterization. Modification 1. (ISO 8871-2:2003 / Amd 1:2005).





 






UNE-IN ISO 9308-1:2014 quality of the water. Count of Escherichia coli and of bacteria coliforms. Part 1: method of filtration by membrane to water with low content of microbiota. (ISO 9308-1:2014).





UNE-IN ISO 9308-1:2001 UNE-IN ISO 9308-1:2001 / AC: 2008 UNE-IN ISO 10113:2014 materials metal. Sheets and bands. Determination of the coefficient of anisotropy plastic. (ISO 10113:2006, corrected version 2007-08-01).





36404:1988 FORMER UNE UNE 36404:2004 EX ERRATUM UNE - EN ISO 10275:2014 metallic materials. Sheets and bands. Determination of the coefficient of acrimony to traction. (ISO 10275:2007).





It UNITES FORMER 36405:1988 UNE-EN ISO 11200:2014 acoustics. Noise emitted by machinery and equipment. Guidelines for the use of the basic rules for the determination of the sound pressure levels of emission in the workplace and at other specified positions. (ISO 11200:2014).





UNE-EN ISO 11200:2010 UNE - EN ISO 11499:2014 dentistry. Single-use local anesthesia cartridges. (ISO 11499:2014).





UNE-IN ISO 11499:2008 UNE-IN ISO 11607-1:2009 / A1: 2014 packaging for products sanitary sterile terminally. Part 1: requirements for the materials, the systems of barrier sterile and systems of packaging. (ISO 11607-1:2006 / Amd 1:2014)





 






UNE-IN ISO 11607-2:2007 / A1: 2014 packaging for products sanitary sterile terminally. Part 2: requirements for processes of forming, sealing and Assembly. (ISO 11607-2:2006 / Amd 1:2014).





 






UNE-IN ISO 11979-9:2007 / A1: 2014






Ophthalmic implants. Lenses intraocular. Part 9: Multifocal intraocular lenses. (ISO 11979-9:2006 / Amd 1:2014).





 






UNE-IN ISO 11979-10:2007 / A1: 2014 implants ophthalmic. Intraocular lenses. Part 10: Intraocular lenses phakic. (ISO 11979-10:2006 / Amd 1:2014).





 






UNE-IN ISO 12010:2014 quality of the water. Determination of alkanes biphenyls of string short (SCCP) in water. Method for chromatography spectrometry (GC-MS) masses with negative chemical ionization (NCI). (ISO 12010:2012).





 






UNE-EN ISO 12228-1:2014 oils and fats of animal and vegetable origin. Determination of the content of sterols individual and total by chromatography of gases. Part 1: oils and fats from origin animal and vegetable. (ISO 12228-1:2014).





 






UNE - EN ISO 12870:2014 ophthalmic optics. Frames for glasses. General requirements and test methods. (ISO 12870:2012).





UNE-IN ISO 12870:2012 UNE-IN ISO 12999-1:2014 acoustic. Determination and application of uncertainty of measurement in the acoustics of buildings. Part 1: Acoustic insulation. (ISO 12999-1:2014).





UNE-EN 20140-2:1994 UNE - EN ISO 13137:2014 atmospheres in the work place. Pumps for personal sampling of chemical and biological agents. Requirements and test methods. (ISO 13137:2013).





UNE-EN 1232:1997 UNE-EN 12919:2000 UNE - EN ISO 13212:2014 ophthalmic optics. Products for the maintenance of contact lenses. Guidelines for the determination of the useful life. (ISO 13212:2014).





UNE-EN ISO 13212:2011 UNE - EN ISO 13935-1:2014 Textiles. Properties of tensile strength of seams fabrics and made-up textile articles. Part 1: Determination of the maximum strength of rupture of seams using the method of strip (ISO 13935-1:2014) UNE-EN ISO 13935-1:1999 UNE-EN ISO 13935-2:2014 Textiles. Properties of tensile strength of seams fabrics and made-up textile articles. Part 2: Determination of the maximum strength of rupture of seams using the grip (method Grab) method (ISO 13935-2:2014) UNE-EN ISO 13935-2:1999 UNE-EN ISO 14114:2014 by gas welding equipment. Plants of regulation for distribution acetylene for welding, cutting and Allied processes. Requirements General (ISO 14114:2014).





UNE-EN ISO 14114:1999 UNE - EN ISO 14246:2014 gas cylinders. Valves for bottles of gas. Tests and inspections of manufacturing (ISO 14246:2014) UNE-IN ISO 14246:2002 UNE-IN ISO 14730:2014 optic ophthalmic. Products for the maintenance of the lenses of contact. Trials of the effectiveness of conservation antimicrobial and recommendations for the determination of the period of validity provided a time open the container. (ISO 14730:2014).





UNE-IN ISO 14730:2001 UNE-IN ISO 15112:2014 Gas natural. Determination of the energy. (ISO 15112:2011).





 






UNE-IN ISO 15181-6:2014 paints and varnishes. Determination of the speed of leaching of biocides contained in paints anti-fouling. Part 6: Determination of the velocity of leaching from tralopirilo by quantifying your product of degradation in the summary. (ISO 15181-6:2012).





 






UNE-EN ISO 15883-1:2009 / A1:2014 washer disinfectors. Part 1: General requirements, definitions and essays. (ISO 15883-1:2006 / Amd 1: 2014).





 






UNE - EN ISO 16297:2014 milk. Count of bacteria. Protocol for the evaluation of alternative methods. (ISO 16297:2013).





 






UNE - EN ISO 17249:2014 cut-resistant safety footwear by chain saw. (ISO 17249:2013).





 






UNE-IN ISO 17463:2014 paints and varnishes. Lines guidelines for the determination of the properties corrosion resistant of them coatings organic through technical electrochemical cyclic accelerated. (ISO 17463:2014).





UNE 48315-1:2011 UNE-IN ISO 17516:2014 cosmetics. Microbiology. Limits microbiological. (ISO 17516:2014).





 






UNE-IN ISO 18082:2014 team respiratory and of anesthesia. Dimensions of the connectors threaded not interchangeable (NIST) at low pressure for gases medicinal. (ISO 18082:2014).





UNE-EN 15908:2011 UNE-EN ISO 19115-1:2014 geographic information. Metadata. Part 1: fundamentals. (ISO 19115-1:2014).





UNE-IN ISO 19115:2006 UNITES-IN ISO 19115:2006 / AC: 2009 UNE-IN ISO 20346:2014 team of protection personal. Shoes for protection. (ISO 20346:2014)





UNE-IN ISO 20346:2005 UNE-IN ISO 20346:2005 / AC: 2007 UNE-IN ISO 20346:2005 / A1: 2008 UNE-IN ISO 22282-6:2014 research and trials geotechnical. Trials hydrogeological. Part 6: tests of permeability in probe using systems closed. (ISO 22282-6:2012).





 






UNE-EN ISO 22476-5:2014 research and geotechnical tests. Field trials. Part 5: Flexible dilatometer test. (ISO 22476-5:2012).





 






UNE-EN ISO 23553-1:2014 safety and control devices for burners and appliances that use liquid fuel. Custom. Part 1: Semi-automatic and automatic valves. (ISO 23553-1:2014).





UNE-EN ISO 23553-1:2010 UNE-EN ISO/IEC 17067:2014 conformity assessment. Fundamentals of the product certification and guidelines for product certification schemes. (ISO/IEC 17067:2013).





UNE 66567:2005 IN UNE-HD 60364-5-52:2014 low voltage electrical installations. Part 5: Selection and installation of electrical equipment. Pipes.





UNE 20460-5-52:1996 UNE 20460-5-52 / 1 m:1999 UNE 20460-5-523:2004 UNE-HD 60364-7-710:2014 low voltage electrical installations. Part 7-710: Requirements for special locations or installations. Local medical.





 






UNE-HD 60364-7-717:2013 / Ac:2014 low voltage electrical installations. Part 7-717: Rules for facilities and special sites. Mobile or transportable units.





 






UNE-IEC/TR 60344:2014 IN Guide to the calculation of resistance of copper conductors bare or coated in the cables and wires for low frequency.





UNE 20623:2003 UNE-ISO 2493-2:2014 paper and cardboard. Determination of resistance to bending. Part 2: Instrument type Taber.





UNE 57075:1995 UNE-ISO plastic 2577:2014. Thermoset moulding compounds. Determination of shrinkage.





UNE 53019-1:2005 UNE-ISO 2846-1, 2014: graphic technology. Color and transparency of the games of the printing process-color inks. Part 1: Lithographic printing offset in sheet and coil heat-set (dry heat).





UNE 54105-1:2001 UNE-ISO 3664:2014 technology graphics and photography. Conditions of observation.





UNE 54001:1973 UNE 54001:1996 ERRATUM UNE 54002:1973 UNE 54002:1996 ERRATUM UNE 54003:1973 UNE 54003:1996 ERRATUM UNE-ISO 4575:2014 plastics. Pasta of poli(cloruro de vinilo). Determination of the viscosity apparent by the rheometer Severs.





UNE 53461:1990 UNE-ISO 4582:2014 plastics. Determination of them changes of coloration, appearance surface in general and variations of them properties after the exposure to the light natural low glass, to the aging natural or to them sources of light of laboratory.





UNE 53384:2002 UNE-ISO 4901:2014 plastics reinforced base resins of polyester not saturated. Determination of the content residual of styrene monomer, as well as of the content of other hydrocarbons aromatic volatile, by chromatography of gases.





UNE 53304-5:1996-UNE-ISO/IEC TS 17021-3:2014 conformity assessment. Requirements for bodies carrying out the audit and certification of management systems. Part 3: Requirements of competition for audit and certification of quality management systems.





 






UNE-ISO/IEC TS 17023:2014






Assessment of the conformity. Guidelines for determining the duration of the certification of management systems audits.