Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December ("Official State Gazette" No. 32, of 6 February 1996), and having regard to the case of annulment of the rules submitted by the Spanish Association for Standardisation and Certification, an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, Royal Decree 1614/1985 of 1 August 1985 and recognized by the additional provision of Royal Decree 2200/1995 of 28 December 1995.
This Directorate General has resolved to publish in the "Official State Gazette" the relationship of Spanish rules UNE cancelled during the month of April 2015, identified by its title and numerical code, which is listed as an annex to the present resolution.
Madrid, May 8, 2015. -Director General of Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Rules cancelled in April 2015
Title | |
---|---|
53364:1984 | Plastics. Determination of the viscosity index of the polymers and copolymers of methyl methacrylate in diluted dissolution |
77028:2002 | Quality of the water. Determination of ammoniacal nitrogen. Method by distillation and valuation or colorimetry. |
77050:2002 | Water quality. Determination of sulphite. Iodometric method. |
77077:2002 | Water quality. General technical specifications for instruments performing the continuous measures on industrial discharges |
77078:2002 | Water Quality. General technical specifications for the pH continuous measuring instruments in industrial discharges |
77079:2002 | Water Quality. General technical specifications for the continuous measuring instruments of conductivity in industrial discharges |
77080:2002 | Water Quality. Technical specifications for the continuous measuring instruments of oxygen dissolved in industrial discharges |
UNE-EN 14806:2006 | Envases and packaging. Preliminary assessment of the disintegration of packaging materials and packaging under simulated composting conditions in a laboratory-scale test |
UNE-EN 60079-0:2011 | Explosive atmospheres. Part 0: Team. General requirements |
UNE-EN 60079-0:2011/IS1:2011 | Explosive atmospheres. Part 0: Team. General requirements |
UNE-EN 60335-2-11:2004 | Appliances and analogues. Security. Part 2-11: Particular requirements for tumble-type dryers |
UNE-EN 60335-2-11:2004/A11:2009 | Appliances and analogues. Security. Part 2-11: Particular requirements for tumble-type dryers |
UNE-EN 60335-2-11:2004/A1:2005 | Appliances and analogues. Security. Part 2-11: Particular requirements for tumble-type dryers |
UNE-EN 60335-2-11:2004/A2:2006 | Appliances and analogues. Security. Part 2-11: Particular requirements for tumble-type dryers (IEC 60335-2-11:2002/A2:2006) |
UNE-EN 60335-2-79:2010 | appliances and analogues. Security. Part 2-79: Particular requirements for high pressure cleaning appliances and steam cleaning appliances |
UNE-EN 60704-2-4:2002 | Test for the determination of the airborne noise emitted by household appliances and analogues. Part 2-4: Particular requirements for washing machines and centrifuges |
UNE-EN 60811-1-1/A1:2001 | Common test methods for materials insulation and cover of electrical cables and fibre optic cables. Part 1-1: General application. Measurement of thicknesses and external dimensions. Determining mechanical properties |
UNE-EN 60811-1-1:1996 | Common test methods for insulation materials and cover electrical cables and fiber optic cables. Part 1: Methods of general application. Section 1: Measurement of thicknesses and outer diameters. Determining mechanical properties |
UNE-EN 60811-1-2/A2:2001 | Common test methods for insulation materials and cover electrical cables and fiber optic cables. Part 1-2: Methods of general application. Thermal aging methods |
UNE-EN 60811-1-2:1996 | Common test methods for insulation materials and cable cover electrical and fiber optic cables. Part 1: Methods of general application. Section 2: Methods of thermal aging |
UNE-EN 60811-1-3/A1:2002 | Isolation materials and electrical cable and cable cover optical fibre. Common test methods. Part 1-3: Methods of general application. Methods for determining density. Water absorption tests. Contraction essay |
UNE-EN 60811-1-3:1996 | Isolation materials and electrical cable and fiber optic cable cover. Common test methods. Part 1: Methods of general application. Section 3: Methods for determining density. Water absorption tests. Contraction essay |
UNE-EN 60811-1-4/A2:2002 | Isolation materials and electrical cable and fiber optic cable cover. Common test methods. Part 1-4: Methods of general application. Low-temperature testing |
UNE-EN 60811-1-4:1996 | Isolation materials and electrical cable and fiber optic cable cover. Methods of common testing. Part 1: Methods of general application. Section 4: Low-temperature tests |
UNE-EN 60811-2-1/A1:2002 | Isolation materials and cover for electrical cables and fibre cables optics. Common test methods. Part 2-1: Specific methods for elastomeric materials. Ozone resistance test. Hot elongation test. Mineral oil resistance test |
UNE-EN 60811-2-1:1999 | insulation materials and electrical cable and fibre cable cover optics. Common test methods. Part 2-1: Specific methods for elastomeric materials. Ozone resistance test. Hot elongation test. Mineral oil resistance test |
UNE-EN 60811-3-1/A1:1997 | Isolation materials and electrical cable and fibre cable cover optics. Common test methods. Part 3: Specific methods for PVC mixtures. Section 1: High temperature pressure test. Cracking resistance test |
UNE-EN 60811-3-1/A2:2002 | Isolation materials and electrical cable and fiber cable cover optics. Common test methods. Part 3-1: Specific methods for PVC mixtures. High temperature pressure test. Cracking resistance test |
UNE-EN 60811-3-1:1996 | Isolation materials and electrical cable and fiber cable cover optics. Common test methods. Part 3: Specific methods for PVC mixtures. Section 1: High temperature pressure test. Cracking resistance test |
UNE-EN 60811-3-2/A2:2004 | Isolation materials and electrical and cable cable cover optical fibre. Common test methods. Part 3-2: Specific methods for PVC mixtures. Mass loss test. Thermal stability test |
UNE-EN 60811-3-2:1996 | Insulation materials and electrical cable and fiber optic cable cover. Common test methods. Part 3-2: Specific methods for PVC mixtures. Mass loss test. Thermal stability test |
UNE-EN 60811-4-1:2005 | insulation materials and electrical cable cover and fiber optic cables. Methods of common testing. Part 4-1: Specific methods for polyethylene and polypropylene mixtures. Resistance to cracking due to environmental efforts. Measure of the hot-flow rate. Determination of the content of black smoke and/or mineral loads in polyethylene by direct combustion. Determination of the carbon black content by thermogravimetric analysis. Assessing the dispersion of carbon black in polyethylene using a microscope |
UNE-EN 60811-4-2:2005 | Isolation materials and Electrical cable and fiber optic cable cover. Methods of common testing. Part 4-2: Resistance to traction and elongation until breakage after pre-conditioning at high temperature. Rolling test after pre-conditioning at a high temperature. Rolling test after thermal aging in the air. Measure of mass increase. Long-term stability test. Method of testing for oxidation by catalytic action of copper |
UNE-EN 60811-5-1/A1:2004 | Isolation materials and cable cover electrical and fiber optic cables. Common test methods. Part 5-1: Specific methods for the filling materials. Drop point. Separation of oil. Low temperature fragility. Total acidity index. Absence of corrosive components. Permittivity at 23 ° C. Current resistivity continues at 23 ° C and 100 ° C. |
UNE-EN 60811-5-1:1999 | Isolation materials and electrical and cable cable cover fibre optic cables. Common test methods. Part 5-1: Specific methods for the filling materials. Drop point. Separation of oil. Low temperature fragility. Total acidity index. Absence of corrosive components. Permittivity at 23 ° C. Current resistivity continues at 23 ° C and 100 ° C. |
UNE-EN 61300-2-35:1998 | Optical fibre interconnect devices and components liabilities. Basic tests and measurement procedures. Part 2-35: Essays. Cable nutation |
UNE-EN 61300-3-29:2006 | Optical fibre interconnect devices and passive components. Basic tests and measurement procedures. Part 3-29: Inspections and measures. Measurement techniques to characterize the amplitude of the spectral transfer function of DWDM components (IEC 61300-3-29:2005) |
UNE-EN 61300-3-29:2006 CORR: 2007 |
Optical fiber interconnect devices and passive components. Basic tests and measurement procedures. Part 3-29: Inspections and measures. Measurement techniques to characterize the amplitude of the spectral transfer function of DWDM components |
UNE-EN ISO 11608-1:2001 | Pen Injects for Medical Use. Part 1: Pen injectors. Requirements and test methods. (ISO 11608-1:1997). |
UNE-EN ISO 11608-2:2001 | Pen injectors for medical use. Part 2: Needles. Requirements and test methods. (ISO 11608-2:2000). |