Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December ("Official State Gazette" No. 32, of 6 February 1996), and in view of the standards developed by the European Standards of Standardisation CEN, CENELEC, ETSI and whose national transposition corresponds to the Spanish Association for Standardisation and Certification, an entity designated by the Order of Ministry of Industry and Energy of 26 February 1986, in accordance with Royal Decree 1614/1985 of 1 August 1985, and recognized for this purpose by the additional provision of Royal Decree 2200/1995 of 28 December 1995.
This Directorate General has resolved to publish in the "Official State Gazette" the list of European standards that have been ratified as Spanish rules during the month of April 2015, identified by its title and code numerical, indicating their date of availability, which are listed as an annex to this resolution.
Madrid, May 8, 2015. -Director General of Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Ratification of European rules. April 2015
Title | F. availb. | Anula | |
---|---|---|---|
CEN/CLC/TR 14060:2014 | Traceability of Healthcare products using the unique device identification (UDI) | 2014-12-03 | UNE-CR 14060:2001 |
1127-2:2014 | Explosive atmospheres. Prevention and protection against explosion. Part 2: Basic concepts and methodology for mining. | 2014-06-18 | UNE-EN 1127-2:2003 + A1:2008 |
| Aerospace Material. Circular electrical connectors, with protected contacts, with triple-entry threaded coupling, operating temperatures between 175 ° C or 200 ° C. Part 003: receptacle, mounted with square flange. Product Standard. | 2015 -02-18 | EN 3645-003:2006 |
3645-008:2015 | Aerospace Material. Circular electrical connectors, with protected contacts, with triple-entry threaded coupling, operating temperatures between 175 ° C or 200 ° C. Part 008: Non-detachable Clavija with armoured ring. Product Standard. | 2015 -02-18 | EN 3645-008:2007 |
4674-001:2015 | Aerospace Material. Electrical cables, installation. Self-enveloping shielded protective sleeve (EMI). Part 001: Technical specification. | 2015 -02-18 |
|
4674-002:2015 |
Aerospace material. Electrical cables, installation. Self-enveloping shielded protective sleeve (EMI). Part 002: Generalities and list of product rules. | 2015 -02-18 |
|
4674-003:2015 | Aerospace. Electrical cables, installation. Self-enveloping shielded protective sleeve (EMI). Part 003: Open Funda. Internal use in the pressurized area, EMI 5 kA protection. Use temperature-65 ° C to 200 ° C. Product Standard. | 2015 -02-18 |
|
4674-004:2015 | Aerospace Material. Electrical cables, installation. Self-enveloping shielded protective sleeve (EMI). Part 004: Open Funda. External use in the pressurized area, EMI 10 kA protection. Use temperature-65 ° C to 200 ° C. Product Standard. | 2015 -02-18 |
|
13237:2012 | Terms and definitions for protective equipment and systems intended for use in potentially explosive atmospheres. | 2012-10-24 | UNE-EN 13237:2003 |
14462:2015 | Surface treatment equipment. Acoustic test code for surface treatment equipment including its auxiliary hand equipment. Accuracy classes 2 and 3. | 2015 -02-25 | UNE-EN 14462:2005 + A1:2009 |
16425:2014 | Simple publishing interface. | 2014-07-09 |
|
16471:2014 | Fireman Helmets. Fire-fighting helmets in open spaces. | 2014-12-17 |
|
16473:2014 | Fireman Helmets. Helmets for technical rescue. | 2014-12-17 |
|
50341-2-20:2015 |
Air lines of more than 45 kV on alternating current. Part 2-20: National Standards for Estonia (based on EN 50341-2012). | 2015 -02-20 |
|
| Alcoholimeters. Test methods and operating requirements. Part 2: Instruments equipped with a nozzle and measuring the rate of breathalyzer of expired air, for general preventive use. | 2015 -03-06 |
|
50436-6:2015 | Alcoholimeters. Test methods and operating requirements. Part 6: Data security. | 2015 -03-06 |
|
60794-3-10:2015 |
Fiber Optic Cables. Part 3-10: Cables exteriors. Family specification for optical cables in pipelines, directly buried and in the air. | 2015 -02-20 |
|
60809:2015 | Lamparas for road vehicles. Dimensional, electrical, and light requirements. | 2015 -03-06 |
|
60810:2015 | Lamparas for road vehicles. Operating requirements. | 2015 -03-06 |
|
60987:2015 | Instrumentation and control systems important for security. Design requirements for the hardware (hardware) of computer systems. | 2015 -02-20 |
|
EN 61169-48:2015 | Radio Frequency Connectors. Part 48: Intermediate specification for the Bmp series radio frequency coaxial connectors. | 2015 -03-13 |
|
EN 61169-50:2015 | Radio Frequency Connectors. Part 50: Particular specification for RF coaxial connectors with an exterior conductor inside diameter of 4.11 mm with a quick locking system. Feature impedance 50 Ohm (QMA type). | 2015 -03-13 |
|
61189-5-2:2015 | Test methods for electrical materials, printed cards, and other interconnection structures and assemblies. Part 5-2: General test methods for materials and assemblies. Welding flux for printed card assemblies. | 2015 -03-13 |
|
61189-5-3:2015 | Test methods for electrical materials, printed cards, and other interconnection structures and assemblies. Part 5-3: General test methods for materials and assemblies. Soldering paste for printed card assemblies. | 2015 -03-13 |
|
61189-5-4:2015 | Test methods for electrical materials, printed cards, and other interconnection structures and assemblies. Part 5-4: General test methods for materials and assemblies. Weld alloys and unfounded solid threads for printed card assemblies. | 2015 -03-13 |
|
EN 61375-2-5:2015 | Electronic Equipment for Railways. Train communications network (TCN). Part 2-5: Train communications Ethernet network. | 2015 -02-27 |
|
61557-9:2015 | Electrical safety in low voltage distribution networks up to 1 000 V c.a. and 1 500 V c.c. Equipment for testing, measuring or monitoring protective measures. Part 9: Equipment for locating isolation failure in IT networks. | 2015 -02-13 |
|
EN 61557-16:2015 | Electrical safety in low voltage distribution networks up to 1 000 V in c.a. and 1 500 V in c.c. Equipment for testing, measuring or monitoring of the measurements protection. Part 16: Equipment for testing the effectiveness of protective measures for electrical equipment and/or electro-medical equipment. | 2015 -01-30 |
|
61753-031-3:2015 | Operating rule for passive fiber passive components. Part 031-3: Non-selective bifurcation devices in wavelength for non-connectorized single-node fiber 1xN and 2xN for Category U. Uncontrolled environment. | 2015 -03-13 |
|
61755-2-4:2015 | Optical fibre interconnect devices and passive components. Optical fibre connector optical interfaces. Part 2-4: Connection of physical, polished, unangled, monomode, non-dispersed physical contact fibers for the application of the reference connector. | 2015 -02-20 |
|
61755-2-5:2015 | Optical fibre interconnect devices and passive components. Optical fibre connector optical interfaces. Part 2-5: Connection of physical contact fibers, polished, angled, monomode, with no offset dispersion for the application of the reference connector. | 2015 -02-20 |
|
62241:2015 | Power nuclear power stations. Main control room. Alarms functions and presentation. | 2015 -02-20 |
|
62320-1:2015 |
Maritime navigation and navigation equipment and systems. Automatic identification system (AIS). Part 1: AIS base stations. Performance and fitness requirements for the function, test methods, and test results required. | 2015 -02-27 |
|
EN 62343-5-1:2015 | Dynamic modules. Part 5-1: Test methods. Dynamic gain-tilt equalizer. Measure of the time of setting of the gain inclination. | 2015 -03-13 |
|
62813:2015 | Lithium-ion condensers for use in electrical and electronic equipment. Test methods for electrical characteristics. | 2015 -02-20 |
|
ISO 3098-1:2015 | Product technical documentation. Writing. Part 1: General requirements. (ISO 3098-1:2015). | 2015 -03-04 | UNE-EN ISO 3098-0:1998 |
ISO 10439-1:2015 |
Oil, petrochemical and natural gas industries. Axial and centrifugal compressors and expansion compressors. Part 1: General requirements (ISO 10439-1:2015). | 2015 -02-18 | EN ISO 10439:2002 |
ISO 10439-2:2015 | Oil, petrochemical and natural gas industries. Axial and centrifugal compressors and expansion compressors. Part 2: Centrifugal and axial compressors without integrated multiplier (ISO 10439-2:2015). | 2015 -02-18 | EN ISO 10439:2002 |
EN ISO 10439-3:2015 | Oil, petrochemical and natural gas industries. Axial and centrifugal compressors and expansion compressors. Part 3: Centrifugal and axial compressors with integrated multiplier (ISO 10439-3:2015). | 2015 -02-18 | EN ISO 10439:2002 |
EN ISO 10439-4:2015 | Oil, petrochemical and natural gas industries. Axial and centrifugal compressors and expansion compressors. Part 4: Expansion Compressors (ISO 10439-4:2015). | 2015 -02-18 | EN ISO 10439:2002 |
ISO 11064-4:2013 | Ergonomic design of control centers. Part 4: Design and dimensions of workstations (ISO 11064-4:2013). | 2013-11-20 | UNE-EN ISO 11064-4:2005 |