Order Pre/1614/2015, 23 July, Which Are Updated Two Professional Qualifications Of The Professional Family Safety And Environment, Collecting In The National Catalogue Of Professional Qualifications, Established By Royal Decree 295...

Original Language Title: Orden PRE/1614/2015, de 23 de julio, por la que se actualizan dos cualificaciones profesionales de la familia profesional Seguridad y Medio Ambiente, recogida en el Catálogo Nacional de Cualificaciones Profesionales, establecidas por Real Decreto 295...

Read the untranslated law here: http://www.boe.es/buscar/doc.php?id=BOE-A-2015-8713

Organic law 5/2002, of 19 June, qualifications and vocational training, aims in the management of an integrated system of vocational training, qualifications and accreditation, to respond with efficiency and transparency to the social and economic demands through training practices. To do so, creates the national system of qualifications and vocational training, defining it in article 2.1 as a set of instruments and actions necessary to promote and develop the integration of offers of training, through the national catalogue of professional qualifications, as well as the evaluation and accreditation of the corresponding professional skills, in such a way that it promotes professional and social development of the people and the needs of the production system are covered.

The national catalogue of professional qualifications, according to article 7.1, is created with the purpose of facilitating the integrated nature and the adequacy between vocational training and the labour market, as well as lifelong training, the mobility of workers and the labour market unit. This catalogue is constituted by the qualifications identified in the productive system and the training associated with them, which is organised in training modules.

Article 5.3 of the organic law 5/2002, of 19 June, attributed to the National Institute of qualifications, the responsibility to define, develop and keep updated the national catalogue of professional qualifications, in his capacity as technical support body to the Council General of vocational training, whose regulatory development contained in article 9(2) of the Royal Decree 1128 / 2003 , 5 September, which regulates the national catalogue of professional qualifications, establishing in its article 9.4, the obligation to keep it permanently updated through periodic review which, in any case, must be made within a period not exceeding five years from the date of inclusion of the qualification in the catalog.

This order is issued pursuant to the Royal Decree 817/2014, of 26 September, which lays down the specific aspects of professional qualifications for as amended, procedure of approval and effects is therefore implementation article 7.3 of the organic law 5/2002, of 19 June, qualifications and vocational training who in their processing obtained opinion of the Council of State number 618/2014, July 23, 2014.

Thus, in the present order updated, substitution complete its annexes, two professional qualifications of family professional security and environment with an antique in the national catalogue of professional qualifications more than five years, that is applicable the Royal Decree 817/2014, of 26 September. In addition, modify partially certain professional qualifications, by replacing certain transversal competence units and training modules associated, included in up-to-date professional qualifications listed in the annexes of this order.

In the process of elaboration of this order the autonomous communities have been consulted and they have issued report the General Council for vocational training and the State School Board.

In his virtue, a joint proposal from the Minister of education, culture and sport and Minister of employment and Social Security, have: article 1. Object and scope of application.

This ministerial order aims to update two professional qualifications corresponding to the family professional safety and environment, leading to the replacement of the relevant annexes, and modify partially certain professional qualifications through the substitution of certain units of competence and training modules associated, in application of the Royal Decree 817/2014, of 26 September, which establishes the specific aspects of professional whose modification qualifications procedure of approval and effects of application article 7.3 of the organic law 5/2002, of 19 June, qualifications and vocational training.

Up-to-date professional qualifications and the partially modified by this procedure are valid and are applicable throughout the national territory, and do not constitute a regulation of professional practice.

Article 2. Update of certain professional qualifications of family professional safety and environment, established by Royal Decree 295/2004, of 20 February, which establishes certain professional qualifications that are included in the national catalogue of professional qualifications, as well as its relevant training modules which are incorporated into the Modular catalogue of vocational training.

Pursuant to the sole additional provision of Royal Decree 295/2004 of 20 February, we proceed to update professional skills, whose specifications are contained in annexes XXVIII and XXX of the aforementioned Royal Decree: one. A new wording is given to annex XXVIII, professional qualification 'Services for pest control'. Level 2. SEA028_2, appearing as annex I to this order.

Two. Redrafting is given at Annex XXX, professional qualification, "Control and protection of the natural environment". Level 3. SEA030_3, which appears as annex II to this order.

Article 3. Partial modification of certain professional qualifications established by Royal Decree 295/2004 of 20 February, which establishes certain professional qualifications that are included in the national catalogue of professional qualifications, as well as its relevant training modules which are incorporated into the Modular catalogue of vocational training.

Pursuant to the sole additional provision of Royal Decree 295/2004 of 20 February, proceed to the upgrade of professional qualifications whose specifications are contained in annex XXVI and XXVII of the aforementioned Royal Decree: one. Professional qualifications amending established as «annex XXVI: operation of water treatment plants.» L2. SEA026_2.» respectively, replacing the unit's competition «UC0075_2: the measures of prevention of occupational risks in the workplace» and associated training module «MF0075_2: safety and health. " (70 h)» by the unit's competition «UC0075_2: the measures of prevention of occupational risks in the workplace» and the associated training module «MF0075_2: safety and health.» (60 h)», corresponding to annex I 'services for the control of pests. Level 2. SEA028_2.» of this order, modifying equally the total duration of training associated with the qualification from 540 to 530 hours.

Two. Professional qualifications amending established as «Annex XXVII: urban and industrial waste management.» Level 2. SEA027_2.» respectively, replacing the unit's competition «UC0075_2: the measures of prevention of occupational risks in the workplace» and associated training module «MF0075_2: safety and health. " (70 h)» by the unit's competition «UC0075_2: the measures of prevention of occupational risks in the workplace» and the associated training module «MF0075_2: safety and health.» (60 h)», corresponding to annex I 'services for the control of pests. Level 2. SEA028_2.» of this order, modifying equally the total duration of training associated with the qualification from 520 to 510 hours.

First final provision. Skill-related title.

This order is issued by virtue of the powers which attributes to the State the article 149.1.1. 2nd and 30th of the Constitution, on regulation of the basic conditions that guarantee the equality of all Spaniards in the exercise of rights and in the fulfilment of the constitutional duties, and for the regulation of the conditions of procurement, issuance and recognition of academic and professional qualifications.

Second final provision. Entry into force.

This order shall enter into force the day following its publication in the "Official Gazette".

Madrid, 23 July 2015.-the Vice-President of the Government and Minister of the Presidency, Soraya Sáenz de Santamaría Antón.

Annex I professional qualification: Professional family pest control services: safety and environmental level: 2 code: SEA028_2 general competition prepare media and products intended for the control of harmful organisms, their transport and application, by adopting measures of occupational risk prevention and protection of the environment.



Competition UC0078_2 units: prepare and transport media and products for the control of pests UC0079_2: applied media and products for UC0075_2 pest control: the measures of prevention of occupational risks in the workplace environment professional scope professional
He develops his professional activity in the service of environmental health, within the scope of the activities of control of harmful organisms, in the areas of implementation, preparation and transport of media and products. Professional activity is carried out both independently as contracted, in the public domain, whether the General Administration of the State, the regional authorities or local, and in private, with individual clients and in large, medium, small, and micro-enterprises, depending on functionally superior. His professional activity is subject to Regulation by the competent administration. In the development of the professional activity apply the principles of universal accessibility in accordance with the applicable legislation.



Sectors production is located in the productive sector of environmental health, in the subsector relating to pest control.



Occupations and jobs relevant terms from the following list of occupations and jobs are used with generic and all-inclusive nature of women and men.

Applicators applicator biocidal pest control spraying of pesticides Desinfectadores-desinsectadores of buildings training associate (360 hours) training modules MF0078_2: preparation of biocidal products and plant protection (120 hours) products MF0079_2: application of media and products for the control of pests (180 hours) MF0075_2: safety and health (60 hours) unit of competition 1: prepare and transport media and products for the CONTROL of pests level : 2 code: UC0078_2 professional accomplishments and performance criteria: RP 1: preparing the utensils, equipment and products for pest control / harmful organisms, for his transfer, according to the plan of action and compliance with the applicable rules.

1.1 CR materials, equipment and work environment and personal protective clothing, are selected depending on the task and packaged for his transfer, in accordance with the procedure of safety.

CR 1.2 the fulfilment of the conditions of conservation of the products and packaging for the control of harmful pests/organisms is verified, prior to their use and transfer, according to applicable regulations.

CR 1.3 instruments for control of harmful pests/organisms are selected, according to the procedures established by the company.

CR 1.4 the conservation status and the operation of the instruments are verified, prior to his transfer, according to the action plan.

2 RP: Carry out loading and unloading of utensils, equipment and products in the means of transport for moving, confirming the material safety data sheet and in compliance with the applicable rules.

CR 2.1 the integrity of containers of pest control is verified, guaranteeing safe transport.

CR 2.2 the integrity of the labels on the containers of pest control is verified, guaranteeing safe transport.

2.3 CR equipment, instruments and biocidal products, are loaded and anchored in the means of transport, security measures and technical specifications.

CR 2.4 transported biocidal product safety tab is controlled, through compliance with the rules applicable to each of them.

2.5 CR materials and products, to respond to contingencies of spills and accidents, are set in the means of transport, according to the procedure of action.

CR 2.6 unloading are carried out in conditions of safety for people and the environment, avoiding risks.

CR 2.7 personal protective equipment are used pursuant to the cards of security products and working procedures, avoiding damage to health.

3 RP: Perform the transfer and custody on the itinerary, utensils, equipment and products for pest control / harmful organisms, guaranteeing the integrity of data and compliance with the applicable rules.

3.1 CR filling in the documentation required in transporting products chemicals/biocides is confirmed, according to regulations applicable to your request by the competent authority.

3.2 CR transport products chemicals/biocides was validated, according to the concordance of the medium and conditions of transportation of goods chemicals/biocides with utensils, according to instructions of the technical manager and the applicable regulations.

CR 3.3 instructions for use of the means of containment of spills are gathered, prior to the transfer, for consultation before the container break or escape from the product.

CR 3.4 the integrity of the goods during transportation, check is made by conservation measures laid down in the applicable legislation.



Professional context: means of production: pressure sprayers, machines of evaporation, fog, termonebulizadoras, aerosols, baits, traps, brushes, brushes, bottles, cans, fixed or mobile equipment, dosing equipment, syringes, among others. Scales, test tubes, graduated jars. Emulsifiers. Equipment personal protection and the environment (signage and marking material). Chemical products (cleaning products, anticorrosive, neutralizing, among others) and biocidal products. Basic first aid kit. Mobile communication system.



Products and results: prepared for utensils, equipment and pest control products. Loading and unloading of utensils, equipment and products in the means of transport. Transfer and custody of utensils, equipment and pest control products, carried out.



Used or generated information: review technical/action plan (diagnosis of the situation, action and evaluation programme) of the top. Product safety data sheets chemicals/biocides. Manual handling of equipment and products. Manual handling of personal protective equipment. Records of entry and exit of instruments, equipment and products. Protocols against contingencies and applicable normative accidents on transport of chemicals.



Unit 2 competition: Applied media and products for the CONTROL of pests level: 2 code: UC0079_2 realizations professionals and completion criteria: RP 1: 'in situ' prepare the instruments and the biocides, used on the control of harmful pests/organisms, to comply with the applicable rules.

CR 1.1 type of plague or infestation, distribution, extent, factors that originate and favour the proliferation and control media, are verified according to the technical report of diagnosis of location, complying with the applicable rules.

CR 1.2 inspection and sampling of the area or item, application of the biocidal products, are carried out through tools and established AIDS.

CR 1.3 the biocides, used on the control of harmful pests/organisms, are validated as set in the control plan.

CR 1.4 deviations produced with regard to the programme of action are collected, according to Protocol established, reporting to the technical manager.

CR 1.5 the inclusion of measures of passive safety for the control of pests in the programme of action, is confirmed according to applicable regulations.

CR 1.6 media environment and personal safety are confirmed, according to the internal work rules and the applicable regulations.

2 RP: Ensure the application of chemicals, biological, physical or chemical means for control of harmful pests/organisms according to the diagnosis of situation, action and evaluation program, complying with the applicable rules.

2.1 CR measures, equipment of personal safety and the environment for the application of chemicals, biological, physical or chemical means are established according to the procedure's safety.

CR 2.2 product dose and the sequence of actions for treatment with biocides, are included in the Protocol, according to applicable regulations.

CR 2.3 application of biocidal products is carried out at the time of increased vulnerability of the target species and less impact, according to the procedures established by the technical manager, activity and use of the facilities.

CR 2.4 waste products, means of personal protection of disposable and consumables of individual protection, discarded, according to procedure and applicable regulations.

CR 2.5 protocols of temporary prohibition for the transit of people and animals are set and marked according to the term of the registration of the product safety.

CR 2.6 the documentary record of implementation of chemicals, biological, physical or chemical means for control of harmful pests/organisms is produced, using situation analysis report, performance and service certificate programs.

3 RP: Carry out the operations of cleaning and operative maintenance of equipment application of biocides, used in control of harmful pests/organisms, according to the standard and use of each instrument, to comply with the applicable rules.

3.1 CR empty containers and waste of biocidal products are deposited in the container, according to their nature.

CR 3.2 equipment application of biocidal products are cleaned, following the instruction manuals, being ready for the next use.

CR 3.3 application of biocides equipment maintenance is performed, as indicated in maintenance manuals.

CR 3.4 equipment are stored, according to established protocol.



Professional context: means of production:
Pressure sprayers, machines of evaporation, fog, termonebulizadoras, aerosols, baits, traps, brushes, brushes, application syringes, autoclaves and treatment ponds, fixed or mobile treatment equipment, dosing equipment, CIP, containers of measurement systems. Equipments of individual protection and environment (signage and marking material). Chemical products (cleaning products, anticorrosive, neutralizing, among others) and biocidal products. Basic first aid kit. Mobile communication system.



Products and results: preparations ' in-situ instruments and the biocidal products used to control harmful pests/organisms '. Applied chemicals, biological, physical or chemical means for the control of pests/organisms. Cleaning and operative maintenance of equipment application of biocidal products carried out operations.



Used or generated information: review technical/action plan (diagnosis of the situation, action and evaluation programme) of the top. Manual handling of equipment and products. Manual handling of personal protective equipment. Manual of how to eliminate the hazardous waste generated. Product safety data sheets and labels chemicals/biocides. Manual and procedure for performance before contingencies and emergencies. With applicable rules of good practice in plans of disinfection, disinsectization and deratization. Records of the operations carried out. Records of hazards, incidents and breakdowns. Signaling. Report of situation analysis, action and service certificate programs.



Unit 3 competition: Adopt the measures of prevention of risks labour in position of work level: 2 code: UC0075_2 realizations professionals and completion criteria: RP 1: assessing the risks associated with the activity and environmental conditions of the facilities, derived from the procedures, equipment, substances and energy, according to regulations applicable to adopt preventive measures.

CR 1.1 risks arising from work equipment are valued, according to the applicable safety standards, by adopting preventive measures.

CR 1.2 risks associated with waste obtained from the activity are valued, according to the order of work, complying with the applicable rules, proceeding to the implementation of preventive measures.

CR 1.3 risks arising from the use of substances and energies in the treatment of waste, are valued, complying with the applicable rules for the implementation of preventive measures.

CR 1.4 risks arising from environmental conditions in the workplace are valued by complying with the applicable rules for the implementation of preventive measures.

CR 1.5 risks arising from facilities in the workplace are valued, complying with the applicable rules for the implementation of preventive measures.

2 RP: Apply preventive and protective measures using individual and collective protective equipment, communicating the incidents, to avoid the risks associated with workplace compliance with the applicable rules.

CR 2.1 the operation of individual protective equipment is checked, to be used, depending on the risk to prevent.

CR 2.2 teams collective protection, emergency plan and evacuation of the facility, used in the development of the works, are reviewed according to established protocol.

CR 2.3 outputs of emergency and the means to be used in an emergency, are identified according to the applicable regulations.

CR 2.4 signage, labelling of work-related health and safety are identified, according to the pictogram of the containers.

CR 2.5 location of the alarm signals is checked, depending on the type of signal and according to legislation, being visible to act in an emergency.

CR 2.6 the location of fire-fighting equipment is checked, coincides with that established in the applicable regulations, to be used in an emergency.

CR 2.7 communication issues in the implementation of preventive measures and protection, is carried out according to the applicable regulations.

3 RP: Applying first aid techniques, following the protocols of action, to avoid complications.

CR 3.1 the first aid kit is revised, according to Protocol established, identifying drugs and cure material.

CR 3.2 poisonings caused by dangerous products, are verified according to identifying symptoms of poisoning, acting on the dangerous product that generates it.

CR 3.3 the protocols of action of first aid in the event of leaks, spills or discharges of hazardous products are executed, to avoid contact with people dangerous products and prevent their discharge to the environment.

CR 3.4 means of information, communication and transport of first aid, are used depending on the emergency, following protocols.

CR 3.5 apply first aid in an emergency, according to protocols.



Professional context: means of production: personal protective equipment. Basic first aid kit. Signalling and marking material. Mobile communication system. Emergency plan. Evacuation plan. Collective protective equipment.



Products and results: risks associated with the activity and environmental conditions of the facilities, valued. Implemented preventive and protective measures. First aid applied, according to emergency.



Used or generated information: risk information provided by the work center. Labels and safety of dangerous products. Precautionary instructions, protocols and working procedures. Work equipment manuals. Parts of communication of risk, incidents and breakdowns. Safety data sheets.



TRAINING module 1: preparation products biocidal products and plant protection level: 2 code: MF0078_2 associated with UC: prepare and transport media and products for the control of pests duration: 120 hours capabilities and evaluation criteria: C1: differentiate products and means used in the control of harmful pests/organisms, characteristics which defines.

CE1.1 explain the concepts of pest/harmful organisms, biocidal products and plant protection products, characteristics that differentiates them.

CE1.2 distinguish between the types of biocides, according to their characteristics.

CE1.3 differentiate the methods and techniques of disinfection and sterilization, characteristics which defines.

CE1.4 in a practical course of control of pest/harmful organisms, differentiate products and used means, starting from a given conditions:-develop a scheme of systems for the control of pest/harmful organisms, according to the physical, chemical and biological, used media.

-Analyze the characteristics of chemical biocides with special attention to the composition, presentation, mechanisms of action and risks associated with its use.

-Identify the registration, labelling and packaging of chemicals used in the control of pests, according to the applicable regulations.

C2: Organize store of media and products used in the control of harmful pests/organisms, according to the applicable regulations of personal and environmental safety.

CE2.1 explain the regulations applicable in the store of chemicals used in the control of plague/harmful organisms.

CE2.2 interpret hazard pictograms according to the indications shown on the label.

CE2.3 in a so-called practical organize store of media and products used in the control of plague/harmful organisms, starting from a given chemical products:-the measures of personal safety and the environment that must be kept in the warehouse of chemical products, complying with the applicable rules.

-Carry out the storage of chemicals according to the criteria of toxicity, use and composition, according to the guidelines established by the technicians.

-Validate the actions and measures to adopt to spillage of products in stores, according to personal and environmental safety regulations.

C3: Prepare the instruments and biocides, according to the established plan of action.

CE3.1 verify, prior to the load of the product, the performance of instruments, following the instruction manual.

CE3.2 name components of the biocidal products, provided in the technical documentation of the product.

CE3.3 describe the formulation of the types of biocides, used in the control of plague/harmful organisms.

CE3.4 summarize the risks associated with the preparation of biocidal products and the response to contingencies, according to safety rules and environmental.

CE3.5 carry out the registration and packaging of biocidal products, according to applicable regulations.

CE3.6 in a practical course of preparation of biocides, from given conditions:-select the tools, equipment and products for the control of pest/harmful organisms, according to provisions of the plan of action.

-Interpret the information contained in the biocidal product labels.

-Check the closing of containers of products, discarding those who fail to comply with the rules applicable
-Identify the criteria of choice of means of implementation depending on the type of plague, local is applied, the local main activity, formulation of the biocidal product.

-Propose the form of preparation of chemical products, according to its commercial presentation and application system.

-Prepare the biocidal products according to the standards of safety and environmental.

C4: Operate in the transport of media and products used in the control of harmful pests/organisms, according to technical specifications for handling utensils, equipment and products, and with the applicable rules of personal and environmental safety.

CE4.1 identify applicable regulations on the transportation of chemicals (biocides), according to traffic regulations.

CE4.2 integrate the documentation required for the transport of equipment, instruments and products, according to applicable regulations.

CE4.3 classify the means of transport used and conditions for the transfer of chemicals, according to the applicable regulations of personal and environmental safety.

CE4.4 describe the conditions of security according to the specifics for the transport of tools, equipment and products.

CE4.5 in a practical course of loading and unloading of utensils, equipment and products, means of transport, from given conditions:-interpret symbols of danger according to the indications shown on the label.

-Perform load and download tools, equipment and products, according to Protocol established, minimizing accidents and/or incidents.

-Perform the upload and download of equipment, instruments and products in conditions of safety, taking into account distribution and anchoring them in the grounds of the means of transport.

-Interpreting the data sheet security that accompanies each of the products used.

-Use of personal protective equipment assigned to the operations of loading and unloading equipment, instruments and products.

CE4.6 in a practical course of transport of tools, equipment and products, starting from a given conditions:-classify the transport for transportation of chemical products and forms of load and anchorage on the vehicle, according to security conditions.

-Propose ways to location of the products during transportation, according to applicable regulations.

-Check failures of anchor - integrity of the containers produced in the transfer of tools, equipment and products.

Skills whose acquisition must be completed in a real work environment: C1 with respect to CE1.4; C2 regarding CE2.3; C3 on CE3.6; C4 on CE4.5 and CE4.6.

Other skills: be responsible for the work developed, completing the tasks within the stipulated deadlines.

Demonstrate a good make professional.

Communicate effectively with the right people at any given time, respecting the channels established in the organization.

Interpret and execute work instructions.

Respect the procedures and internal rules of the organization.



Contents: 1. General concepts of concept of pest pest control, vector and disseminator.

Names of pesticides: rodenticides, insecticides, fungicides, herbicides, avicides, among others.

The circle of risk and human health. Concepts of endangerment, toxicity, and persistence.

International Programme on chemical safety, international code of conduct and responsible CARE: authorisation of biocidal products and plant protection in Spain.

Requirements manufacturers and importers, conditions of packaging, labelling rules.



2 media and products used in the control of pests physicists/physical-chemical means.

Chemical products: insecticides. Disinfectants, and rodenticides.

Next-generation products.

Hormones and pheromones: chitin inhibitors.

Biological pest control. Other systems.



3 forms of preparation, packaging and delivery system and used as biocides components products instruments: matter active, adjuvants, inert substances.

Solid formulations: powders wettable powders, dustable, and soluble granules esparcibles, dispersible microgranules, baits and fumigants.

Liquid formulations: autosuspendibles, emulsifiable and soluble liquids. Microencapsulated. Aerosols.

Disinfection and sterilization techniques and media: main agents causing infections, infectious diseases that are pests.

Disinfection: chemical and physical methods.

Sterilization: chemical and physical methods.

Application of chemical methods techniques: immersion, lotion, spray, spray, fumigation and aerosols.

Apparatus: Calibration of dose and use, maintenance.



4. transport of media and regulations applicable in the transport of media and products.

Documentation.

Means of transport: features. Location of the products in the vehicle.

Conditions, safety in transport.



5 facilities and premises for storage of chemicals legislation of a general nature: hygiene of environment, windows and doors.

Fire extinguishers, fire fighting systems.

Layout of storage and administration areas. Separation of products. Personal safety and environment measures: responses to contingencies.



Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.



Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the preparation and transport of media and products for pest control, which will be using one of the following ways:-academic training level 2 (Spanish higher education qualifications framework) or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.



TRAINING module 2: application of media and products for the CONTROL of pests level: 2 code: MF0079_2 associated with UC: applied media and products for the control of pests duration: 180 hours capabilities and evaluation criteria: C1: verify the characterization of the harmful pests/organisms, specifying the conditions of the site and the application of the control systems environment.

CE1.1 identify the types of plague/harmful organisms from the urban environment and natural (rodents, arthropods, birds, bacteria, viruses, fungi, among others), attending to their basic dynamics and evolution.

CE1.2 describe the area or item to be treated, by specifying the conditions of the place or environment.

CE1.3 distinguish the measures of passive safety in the control of plague/harmful organisms (passive pest control, passive insect, among others.) depending on the type of pest.

CE1.4 classifying the security measures of the environment on the basis of physical, physico-chemical, chemical or biological hazards.

CE1.5 in a practical course of characterization of the behavior of the harmful plague/organisms, from special conditions where it is located:-identify the organisms causing plagues, assessing the qualitative and quantitative signs.

-Place on a flat area or element susceptible to treatment.

-Distinguish the damage caused by the plague/harmful organisms, the health of people and animals.

-Distinguish the damage caused by the plague/harmful organisms, the environment.

C2: Identify work procedures, equipment and products used in the control of harmful pests/organisms, according to the established plan of action and prevention of occupational risks.

CE2.1 list hygiene, environmental and structural measures for the control of pest/harmful organisms, as set out in the action plan.

CE2.2 explain the operation of the technical means used in the application of biocidal products.

CE2.3 classify forms of application of biocides, depending on the product and means used in the control of plague/harmful organisms.

CE2.4 define the risks arising from the management of the biocidal products.

CE2.5 classify biocidal products according to the plague/harmful organisms or disease control, chemical nature, forms of action and effects, among others.

CE2.6 in a practical course of identification of the procedure of action in controlling the harmful plague/organisms, starting from a given conditions:-identify the formulation, application, data identification, among others, of biocidal products, according to applicable regulations.

-Calculate the concentration/doses of products to apply, according to the specifications of the labels.

-Identify the deviations established in the plan of action, with respect to the diagnosis of the situation.

C3: Applied media and products used in the control of harmful pests/organisms, as established by the technical manager and in sanitary conditions, security and prevention of occupational risks.
CE3.1 list working procedures on the control of harmful organisms/plague, following the protocols work.

CE3.2 identify elements of delimitation of areas of danger (tapes, railings, luminous and sealed facilities, among other signs), according to the area, place or application environment of products used in the control of plague/harmful organisms.

CE3.3 describe the measures of application of biocidal products, according to the type of product to apply.

CE3.4 differentiate phases on the integrated control of pest/harmful organisms, according to the characteristics of the plague.

CE3.5 quote the personal protective equipment, according to the type of treatment to be applied.

CE3.6 in a practical course of application products and means used in the control of plague/harmful organisms, from the documentation provided by the responsible technical:-bring the species to combat and the instruments and control equipment established for the species.

-Identify the type of installation, using the documentation provided by the technician.

-Place on a flat areas or elements susceptible to treatment.

-To develop the implementing measures set out in the programme of action.

-Applying localized brushing technique and/or evaporation, as indicated in the report of the responsible technician.

-Apply the technique of spraying, fogging, aerosols, fumigation and installing baits and traps, in the environmental control of the plague, as established by the technical manager.

-Perform the application of products according to the prevention of occupational and environmental risks.

C4: Apply techniques of cleaning and maintenance of the equipment for the application of biocides, used on the control of harmful pests/organisms, according to the instruction manual of the equipment and labour risk prevention.

CE4.1 quote waste produced in the operations of control of pest/harmful organisms according to the phases of work.

CE4.2 Select empty containers, according to the typology of the same and products containing.

CE4.3 Remove empty containers, according to their characteristics of dangerousness and through licensed waste managers.

CE4.4 Select residues of biocidal products, consumables, corpses and containers according to their characteristics of dangerousness and through licensed waste managers.

CE4.5 in a practical course of operating and cleaning of application equipment of biocides, from given conditions:-apply the techniques of installation of the unit, according to the instruction manual of the equipment.

-Dismantle the unit's application of biocidal products, according to the instruction manual.

-Make work tools/equipment washing operations, according to Protocol established.

-Perform work instruments/equipment rinsing operations, according to Protocol established.

C5: Complete bulletins or information forms to superiors and authorities, as set out in the applicable legislation.

CE5.1 identify the newsletters and/or forms of information, depending on the recipient.

CE5.2 in a practical course of preparation of a report for action, to inform the technical manager, starting from application of biocides given conditions:-select the documents according to the treatment with biocides.

-Fill in the report according to the data of the products used and the treated areas.

-Describe the report incidents and deviations of the programme of action.

-Indicate the deadlines for security before reusing the treated areas.

Skills whose acquisition must be completed in a real work environment: C1 with respect to CE1.5; C2 regarding CE2.6; C3 on CE3.6; C4 on CE4.5; C5 regarding CE5.2.

Other skills: be responsible for the work developed, completing the tasks within the stipulated deadlines.

Demonstrate a good make professional.

Communicate effectively with the right people at any given time, respecting the channels established in the organization.

Interpret and execute work instructions.

Respect the procedures and internal rules of the organization.



Contents: 1. physical media instruments and application systems: ultrasonic equipment. Installation of Attractants.

Localized application: installation of traps and baits. Brushing and machines of dusting. Brushes, brushes, application syringes, treatment ponds, CIP systems.

Environmental application: autoclave, pressure sprayers, nebulizer, termonebulizadoras, sprays and spraying machines. Products Biorational and biological.

Personal protective equipment.

Equipment for the protection of the environment (signage and marking material).

Mobile communication system.



2 economic interest and public health home mouse, other types of mice, grey and black rat and other rodents that can cause urban pest and rodents in the wild.

Indirect signs of rodent identification: fingerprints, noises, smells, holes and Burrows. Quantification of the rodent population: direct observation, measurement of feed intake. Capture, marking and recapture: tagged bait.

Communicable diseases by rodents, rodent control passive measures.

Products and media rodenticides, protocols and ways of application of products and means used as rodenticides.

Collection of information for the evaluation.



3. arthropods of economic interest and public health: characteristics of arthropods: insects, Arachnids, crustaceans, and myriapods diseases transmitted by arthropods, economic damage caused by pests arthropods, simply annoying arthropods.

Indirect signs of arthropod identification: footprints, feces, noises, odors, holes, damage to food and objects, quantification of the plague.

Insect passive measures.

Products and media in the control of pests caused by arthropods, protocols and ways of application of products and means used in the control of arthropod pests.

Collection of information for the evaluation.



4 infectious agents: main agents causing infections infectious processes constituting disease.

Chemical and physical methods of infection control.

Verification of results, protocols for prevention of re-infection.

«In situ» product preparation and means for pest control: previous procedures of preparation of products and instruments, packaging, testing and regulation of the applicator system.



5. control of harmful pests/organisms best practices for cleaning and disinfection processes.

Biocidal products.

Interpretation of safety data sheets.

Preparation of solutions of products at different concentrations.

Types of physical means of controlling harmful pests/organisms.

Description and operation of tools, instruments and equipment: types, uses and applications. Operating maintenance.



6 newsletters and forms identifying documents: data from the company that performed the service of pest control.

Diagnosis of the situation or identify the problem.

Environmental corrective measures, recommended treatment, identify those responsible for the treatment.

The Action Plan documents: diagnosis of the situation, security realization of service information, model of certificate of completion of the service.



Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.



Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the application of media and products for pest control, which will be using one of the following ways:-academic training level 2 (Spanish higher education qualifications framework) or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.



TRAINING module 3: safety and health level: 2 code: MF0075_2 associated with UC: the measures of prevention of occupational risks in the job duration: 60 hours capabilities and evaluation criteria: C1: identify the risks associated with the activity and environmental conditions of the facilities.

CE1.1 identify the risks arising from the operation of machines and tools: entrapments, projections, among others.

CE1.2 identify the risks arising from the handling of lifting and transportation equipment: entrapments, cuts, strains, vibrations, noises, among others.

CE1.3 identify the risks arising from the handling of loads and the application of forces: fall of objects, skeletal muscle, among other injuries.

CE1.4 identify the risks of explosion and fire, associated with the activity and environmental conditions of the facilities.
CE1.5 identify the risks related to exposure to chemical, physical and biological agents associated with the activity.

CE1.6 recognize the risks arising from the storage of products, associated with the activity and environmental conditions of the facilities.

CE1.7 recognize the risks of supply facilities: electricity, water, gas, compressed air, among others.

CE1.8 recognize the risks arising from the characteristics of workplaces: ladders, work platforms, transit, among other surfaces.

CE1.9 recognize the risks arising from the accomplishment of work and environmental conditions of the facilities.

C2: Measures of prevention and protection to the risks arising from the specific activity.

CE2.1 recognize the means of collective protection applied to the types of risks: guards guards, immaterial barriers, general ventilation, localized extraction, among others.

CE2.2 detect emergencies associated with an activity and its intervention in them.

CE2.3 in a practical case of selection of the E.P.I, from the material of protection given:-select individual head protection equipment.

-Select individual respiratory protective equipment.

-Select equipment for individual protection of the face and eyes.

-Select equipment for individual protection of the trunk and extremities.

-Select equipment for individual protection against falls from a height.

-Select equipment for individual protection against noise and vibration.

-Select equipment for individual protection against risks of chemical, biological and radiation.

-Select the thermohygrometric conditions individual protection equipment.

C3: Applied techniques of first aid in the workplace.

CE3.1 identify medicines and material of priests who formed the first aid kit.

CE3.2 recognize the symptoms of poisoning, injuries and first aid techniques.

CE3.3 identify the protocols of action of first aid in leaks, spills or discharges of hazardous products.

CE3.4 in a practical course of action in an emergency, in the workplace, from given conditions:-Select media information and emergency communication.

-Apply the technique of first aid, according to the characteristics of the emergency.

Skills whose acquisition must be completed in a real work environment: C2 with respect to CE2.3; C3 on CE3.4.

Other skills: be responsible for the work developed, completing the tasks within the stipulated deadlines.

Demonstrate a good make professional.

Communicate effectively with the right people at any given time, respecting the channels established in the organization.

Interpret and execute work instructions.

Respect the procedures and internal rules of the organization.



Contents: 1. basic legislation on prevention of labor risks regulations applicable occupational risk prevention. Rules of prevention services. Applicable regulations.



2. identification of the risks associated with the activity risks by organizational factors: Organization. Work shifts. Risks by material factors: order and cleanliness. Places of work. Ventilation and air conditioning. Noise. Vibrations. Lighting. Risks by uses of elements: hand tools. Manipulation of objects. Lifting and transport. Machines. Electrical hazards: electrical installations. Electrical equipment. Fire and explosion hazards: types of fire. Detection, alarm and extinguishing equipment. Fire extinguishing agents.

Risks by uses of substances: routes of entry and absorption. Types of substances (physical, chemical and biological). Effects in the body. Risks by explosion to radiation: ionizing radiation. Non-ionizing radiation. Risks by overexertion: physical load. Mental load.



3 application of preventive measures and protection techniques of first aid equipment (EPIs) individual protection: protection of the skull (Cap, harness). Protection of the face and the visual device (welders screens, glasses). Protection of the hearing aid (ears, Cap, helmet). Protection of the upper extremities (gloves, mittens, mitts, among others). Protection of the lower extremities (shoes with toe-cap safety, with security, among other templates). Protection of Airways (dependent on the environment, independent of the environment, of self-rescuers). Protection against aggressive (chemical, thermal, radiation). Signalling garments. Protection against fall height (fastening systems, systems antacids, antacid devices. Signalling: On paper. Luminous. Acoustic. Verbal communication. Gestural. Additional. First aid: first aid kit content. Intoxications. Trauma. Sunstroke or frostbite. Burns. Bruises. Wounds. Hemorrhage. Stings and bites.



Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.



Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the implementation of the measures of prevention of occupational risks in the workplace, which will be using one of the following ways:-academic training level 2 (Spanish higher education qualifications framework) or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.



Annex II professional skill: CONTROL and protection of the NATURAL environment family professional: safety and environmental level: 3 code: SEA030_3 competition general manage the natural environment through the control and monitoring of natural areas, and use, restoration, maintenance, management and protection of natural resources, compliance with occupational health regulations and applicable regulations.



Competition UC0083_3 units: control and monitor natural spaces and public use UC0084_3: control the exploitation of forest resources and minerals UC0085_3: controlling the use of hunting and fishing resources UC0086_3: monitor and collaborate in the operations of restoration, maintenance, management and defense of natural resources environment professional scope professional develops his professional activity in natural areas management service in the areas of control and monitoring of natural areas, and the use, restoration, maintenance, management and defense of natural resources, the scope of the activities of control and protection of the natural environment and environmental professional activity is carried out both independently as contracted, in the public domain, whether the General Administration of the State administrations regional or local, and in the private sector, with private clients and in large, medium and small businesses. His professional activity is subject to Regulation by the competent administration. In the development of the professional activity apply the principles of universal accessibility in accordance with the applicable legislation.



Sectors production is located in the sector of management of natural spaces, in the sectors relating to the control and protection of the agricultural, forestry and natural environment.



Occupations and jobs relevant terms from the following list of occupations and jobs are used with generic and all-inclusive nature of women and men.

Forestry technical forestry or similar agents and/or forestry technicians in control of natural agents environmental or similar training associate (600 hours) training modules MF0083_3: activities of public use and protection of the natural environment (210 hours) MF0084_3: Control and surveillance of the exploitation of natural resources (90 hours) MF0085_3: Control and surveillance of the use of hunting and fishing resources (90 hours) MF0086_3 : Control and surveillance of the restoration, maintenance, management and defense of our natural spaces (210 hours) unit of competition 1: control and monitor the areas natural and your use public level: 3 code: UC0083_3 realizations professionals and completion criteria: RP 1: controlling the public use of the natural environment, equipment and works of conditioning and preparation of the natural environment , according to applicable legislation, so that compliance with the rules for visitors and users.

CR 1.1 activities of public use in the natural environment are controlled according to applicable regulations.

CR 1.2 features of the natural environment are transmitted to visitors and users, when they are accompanied in the activities of public use in the natural environment.
1.3 CR signage, infrastructure, and making space for the activities of public use in the natural environment are inspected, according to applicable regulations.

CR 1.4 information environmental impact assessments prior to the works of conditioning and preparation of the medium, is transmitted to the competent technicians through the preparation of reports pursuant to.

CR 1.5 inspection of the works of conditioning and preparation of the environment for public use is made according to applicable regulations.

CR 1.6 materials for construction, packaging and preparation of the natural environment are controlled according to the public use of the natural environment and applicable regulations.

1.7 CR awards and administrative authorizations for the public use of the natural environment are inspected according to the conditions and applicable regulations.

2 RP: Carry out the control and surveillance of the hills and cattle trails, for their protection and recovery, according to applicable regulations.

CR 2.1 controls for the protection of the public space based on visitor access and access of intruders, are carried out according to the established protection plan.

CR 2.2 the physical integrity and the limits of forests and lands in the public domain are controlled according to applicable regulations, raising Act of invasion or occupation.

CR 2.3 information from assessments of environmental impacts of activities or applications in mountains of public utility or cattle trails, is transmitted to the competent technicians through the preparation of reports pursuant to.

CR 2.4 intervention in the work of research and/or authorization of future occupations or occupations already existing, is carried out according to applicable regulations, for the recovery and protection of the public area and livestock routes.

CR 2.5 approval and realization of exploitations or occupations in the natural environment or the cattle trails, are confirmed according to applicable regulations.

CR 2.6 means of control and surveillance of the hills and cattle trails, are used depending on the operation being carried out.

3 RP: Control the biocenosis of the natural environment, according to established protocol and intervening with technical decision-makers, to maintain the ecological balance, promote their conservation or recovery, complying with the applicable rules.

CR 3.1 plant and wild animal species are identified in accordance with aspects of their biology and their geographical distribution.

CR 3.2 intervention, with the competent technicians in sampling techniques for evolution, reproduction and conservation of stocks, is carried out as set out in the Protocol.

CR pathological monitoring of animal species of the natural space, 3.3 is done according to established procedures, and applying the treatments according to the instructions received.

CR 3.4 the capture of animals is carried out depending on its State and the measures established for later slaughter or transfer to the center of recovery or laboratory.

CR 3.5 intervention with the technicians in the localization and elimination of alien species that pose a threat to native species catalogued, is carried out according to established protocol.

CR 3.6 plundering, collection, unauthorized possession, public exhibition, naturalization, traffic, Commerce, among others, of species catalogued, are reported according to established protocol, adopting measures precautionary to protect specimens.

3.7 CR live specimens or dead, or parts thereof, or their spread them, that lack of documentation for his tenure, they stand at the disposal of the competent authorities, complying with the applicable rules.

CR 3.8 activities in the natural environment that pose a serious, immediate and direct threat to specimens of species listed in endangered flora and fauna, are paralyzed according to Protocol and applicable regulations.

CR 3.9 information to the public in the centers of recovery, botanical gardens, breeding in captivity, among others, centres are transmitted according to established protocol.

CR 3.10 information to the public about the activities of environmental education and at events around the preservation of animal or plant species, is carried out, together with the competent technicians, according to established protocol.

4 RP: Monitor the management of waste in the natural environment, according to established protocol for the protection of the natural environment, complying with the applicable rules.

CR 4.1 samples of discharges and/or waste, soil, plants and animals of the natural environment, are collected according to the protocols laid down for each of them.

CR 4.2 takes samples of discharges and/or waste, soil, plant and animal are introduced into the container set, following established protocol.

CR 4.3 takes samples of discharges and/or waste, soil, plant and animal are sent for analysis, according to established protocol.

CR 4.4 reports the management of waste in the natural environment, are manufactured from observations 'in situ', according to established protocol.

CR 4.5 operation of automatic equipments provided by waste management firms, is assessed according to the applicable legislation or established environmental statement.

CR 4.6 intervention in the investigation of authorship or responsibility of persons or entities that Act on environmental incidents in the natural environment, is carried out by formulating complaints, reports or reports that come, complying with the applicable rules.

5 RP: Report of activities that violate or hold the paleontological and historic heritage in the natural environment, for the conservation and protection of the same, according to applicable regulations.

CR 5.1 finds of fossils in new or existing sites are reported, according to their location, characteristics, ownership of the soil, and potential threats.

5.2 CR complaint and intervention of the copies of the unauthorized collection of fossils, the relocation, the deterioration or destruction thereof, are carried out according to the applicable regulations.

CR 5.3 findings of historical sites new or existing remains are reported, according to their location, characteristics, ownership of land and potential threats.

5.4 CR complaint and intervention of the copies of the unauthorized collection of historic remains, the relocation, the deterioration or destruction thereof, are carried out according to the applicable regulations.

6 RP: Carry out the control and surveillance of the area included in the Natura 2000 network (RN2000), natural, to preserve the biodiversity in the area of the European Union.

CR 6.1 monitoring of the conservation status of habitats and species of special conservation areas under cover of the national legislation and the EU is performed according to the protocols laid down by the competent public administration.

CR 6.2 monitoring of the activities carried out in the areas of special protection (ZPE) are carried out, according to the granted authorisation scheme or the Plan of management of the areas.

CR 6.3 strategies for the conservation of habitat and species, are applied according to the established plan of recovery or conservation of habitat and species.



Professional context: means of production: optical equipment: binoculars, spotting scope. Communication equipment: portofono, radio, radio station. Sampling containers. Material marking of species: rings, radioactive markers, radio transmitters. Vehicles. Distinctive uniforms. Indicative signs. Natural construction materials used traditionally for the construction of small works of rustic character. Aerial photograph. Compass. GPS. Technologies of information, computers and specific software application in the management of natural areas.



Products and results: controlled the public use of the natural environment, equipment and works of conditioning and preparation of the natural environment. Carried out the control and surveillance of the hills and cattle trails. Controlled the biocenosis of the natural environment by intervening with the technical managers. Monitored the management of waste in the natural environment. Information on the activities that violate or hold the paleontological and historic heritage in the natural environment.



Used or generated information: cartography. Bibliography and field guides. The natural area management plans. Guiding plans of use and management of natural areas. Regulations international, national, regional and local. Instructions drawn up by the higher bodies responsible for physical space. Reports and record on the State of the flora and fauna and discharges and waste. Records of complaints or overcrowded. Manual monitoring of the conservation status of habitats and spaces.



Unit 2 competition: Control the exploitation of the resources forest and minerals level: 3 code: UC0084_3 realizations professionals and completion criteria: RP 1: intervening in the work of forest resources inventory, according to Protocol established for the management of forests, complying with the applicable legislation.

CR 1.1 auxiliary data (forest mensuration and topography) works are executed received instructions and comply with the applicable rules.

CR 1.2 inventory of forest resources, prepares the forest masses and established protocol.
CR 1.3 intervention in the management of forests, is carried out according to established protocols.

2 RP: Oversee the operations included in the phases of use of wood, according to established protocol, to ensure the conservation of the forest land, complying with the applicable rules.

CR 2.1 request for use of wood is accompanied by reports of feasibility, necessity, risks, and justification of requested, according to the plans of use and applicable regulations.

CR 2.2 the completion of final, and prior proceedings proceedings of the short to be pointing and counted on white, in actions and uses of wood in a natural environment, is carried out to bidders or bidders of exploitation, according to applicable regulations.

CR 2.3 attendance at auctions for the use of wood in public mountains, is carried out as a representative of the forest administration.

CR 2.4 short phases, meeting, desembosque, loading and transportation of wood are supervised, according to established protocol.

CR 2.5 occurs when the cessation of actions in the use of timber, threaten the conservation of forest resources.

CR 2.6 denunciation of actions not authorized, in the use of wood, is carried out according to applicable regulations.

3 RP: Overseeing operations for use of Cork, resin, grasses, berries, aromatic and medicinal plants, according to the plans of established use, for maintenance of forest resources, complying with the applicable rules.

CR 3.1 requests for use of resin, Cork, berries, grass and aromatic and medicinal plants, are accompanied by reports of feasibility, necessity, risks, and justification of the request, according to the plans of established use and applicable regulations.

CR 3.2 filling in the previous minutes and final, for actions and use of resin, Cork, wild fruits, pastures, aromatic and medicinal plants in a natural environment, is carried out to bidders or bidders of exploitation, according to applicable regulations.

CR 3.3 attendance at auctions for the use of resin, Cork, berries, grass and aromatic and medicinal plants in public mountains, is carried out as a representative of the forest administration.

CR 3.4 the phases of implementation of the use of Cork, grasses, berries, aromatic and medicinal plants, are monitored according to the established development plan.

CR 3.5 occurs when the cessation of actions in the use of Cork, grasses, berries, aromatic and medicinal plants, threaten the conservation of forest resources.

CR 3.6 denunciation of actions not authorized, the use of Cork, grasses, berries, aromatic and medicinal plants is carried out according to applicable regulations.

3.7 CR facilities and operations related to the activity of beekeeping are controlled according to the technical procedures and applicable regulations.

4 RP: Control the exploitation of minerals, mines and quarries in the natural environment, for the maintenance of minerals, mines and quarries, according to applicable regulations.

CR 4.1 environmental impact study is carried out by competent technicians, before requests for concessions for extraction of minerals in the natural environment.

CR 4.2 administrative concessions relating to mineral extraction are monitored according to applicable regulations.

CR 4.3 the use of minerals is monitored according to the conditions and regulations.



Professional context: means of production: measurement instrumentation: tape measure, forcipula, bark gauge, growth, clisimetro, clinometer, hypsometer Auger. Instruments of orientation, surveying and topography: compass in hand, already, square surveyor, optical Prism, tape measures, Pocket, GPS stereoscopes. Binoculars, radio stations, «hydes», weapons, planes, air frames, stereoscopes. Technologies of information, computers, and application software in the management of natural areas.



Products and results: inventory of forest resources made. Supervised use of wood, resin, Cork, grasses, berries, aromatic and medicinal plants. Controlled the exploitation of minerals, mines and quarries in the natural environment.



Used or generated information: planning of the work. Technical information on the methods and processes for obtaining of various forest products. Rates of returns for the various operations. Standards of safety and health in forestry work. Tables of cubage and valuation of forest products. Legislation on activities related to the use of natural resources: timber, fruits, Cork. Cartography and aerial photography. Proceedings of denunciation and overcrowded. Previous certificates, end of the short to be pointing and told white.



UNIT of competency 3: Control the utilization of the resources hunting and fish level: 3 code: UC0085_3 realizations professionals and completion criteria: RP 1: control hunting species in regime of freedom and according to established protocol, for the hunting, complying with the applicable rules.

CR 1.1 the hunted species are identified in accordance with aspects of their biology and their geographical distribution.

CR 1.2 the remains of dead specimens, tracks and signals are conditioned, if necessary, according to established protocol.

CR 1.3 hunting species and harmful species for hunting, capture for its subsequent Census and/or control, according to the established methods and with respect for the applicable regulations.

1.4 CR diseases and epizootics of hunted species in regime of freedom are detected, by the tasks of surveillance and protection of hunting species.

CR 1.5 report diseases and epizootics of the hunted species in regime of freedom, is exposed to the EMTs according to established protocol.

CR 1.6 prophylactic and/or therapeutic, measures if necessary, apply for hunting species in regime of freedom, along with the EMTs.

2 RP: Control the activities in the natural environment that affect the species hunted in regime of freedom and its habitat, according to Protocol established, for the maintenance of the hunted species in regime of freedom and in compliance with applicable law.

CR 2.1 the work scheduled in the improvement of the habitat of the game species (fences, plantings, feeders, drinkers, shelters, improvement of shrub and tree vegetation) is done according to established protocol.

CR 2.2 intervention in the monitoring and control of species of small game populations and largest, occurs subsequently to the restocking of game minor and major of a hunting area species.

CR 2.3 hunting trophies (in hand and field) are valued according to the official scales.

CR 2.4 activities of hunting and game management of the space or coto will be monitored, according to applicable regulations.

CR 2.5 hunting that affect freedom regime hunting species and their habitat, are collected in the reports, according to established protocol, for his back complaint.

CR 2.6 parts hunting and means employed in the activity, that violate the applicable regulation, intervene according to Protocol established, for his back complaint.

3 RP: Perform the surveillance, control, monitoring and protection of the species of inland waters in regime of freedom, as well as to supervise the work of improving the space aquaculture, fish utilization, according to established protocol and in compliance with the applicable rules.

CR 3.1 aspects of the biology and ecology of the species of inland waters and its area of distribution, are identified according to established protocols.

CR 3.2 tools, methods of fishing, stretches of river, fishing, poaching and assaults on river ecosystems are monitored according to the applicable regulations.

CR 3.3 field data are taken following work instructions.

CR 3.4 monitoring and utilization of the fish populations in inland waters, is carried out according to applicable regulations.

CR 3.5 intervention in the work of artificial restocking of continental species occurs, following the procedures and instructions established.

CR 3.6 the study of the populations of animal species occurs, according to catches of exemplary players, technical marking, tracking and transport of fish, elimination of species competing or not desirable (exotic) and descastes, acting according to work instructions.

CR 3.7 the intervention of the specimens obtained in the illegal practice of fishing is carried out, according to Protocol established, for his back complaint.

3.8 CR works planting and/or conservation of riparian vegetation and aquatic, for use as shelter or area of feeding of fish populations, are monitored according to established protocols.



Professional context: means of production:
Optics: binoculars, spotting scope. Communication equipment: portafono, radio, stations. Material marking of species: rings, radioactive markers, radio transmitters. Collection of remains, tracks and samples team. Capture equipment. Water sampling equipment. Distinctive uniforms. Indicative signs. Compass. GPS. Mobile telephony. Vehicles. Technologies of information, computers, and application software in the management of natural areas.



Products and results: Control of the hunting species in regime of freedom. Controlled activities in the natural environment that affect the hunted species in regime of freedom and its habitat. Carried out the work of monitoring, control, monitoring and protection of the species of inland waters in regime of freedom. Records of complaints or overcrowded.



Used or generated information: cartography. Bibliography of countryside: Wildlife guides and field guides. Natural resource management plans. Guiding plans of use and management of natural areas. Law International, national, regional and local. Instructions drawn up by the higher bodies. Reports and record on the State of the fauna.



Unit 4 competition: Monitor and assist in the operations of SUBTRACTION setting, maintenance, management and defense of natural resources level: 3 code: UC0086_3 realizations professionals and completion criteria: RP 1: monitor forestry and hydrological-forestry restoration work, according to the plans of management and restoration, for the maintenance and defence of natural resources.

CR 1.1 the implementation of afforestation and reforestation work is verified, pursuant to legal, technical feasibility and environmental impact, of the same reports.

CR 1.2 the implementation of soil preparation work is verified, as planned in the management and restoration of natural resources plans.

CR 1.3 transactions in the works plant restoration, correction hydrological-forestry and protection of unstable soils and slopes are checked, as set by the program.

CR 1.4 marras e studies research of the causes of damage to the already carried out reforestation, are informed of them, the owner or Director of the work, according to Protocol established.

CR 1.5 the uses permitted and prohibited in the reforestation carried out already, are controlled according to the management and restoration plans.

2 RP: Watch the work of destruction of the scrubland and herbaceous tapestry, among others, own treatments silvicultural forests, according to the applicable law, for the protection of the environment and natural resources.

CR 2.1 cultural work (destruction of the scrub and herbaceous tapestry, among others), applied to the forest masses are verified pursuant to and respecting the harmony of the environment.

CR 2.2 works of machinery and tools of destruction of the scrubland and herbaceous tapestry, in the leading treatments for the Elimination of the indoor vegetable competitor, are monitored according to plan and the applicable regulations.

CR 2.3 work machinery and tools of the specific work of the care of forests (tilling of soil, fertilization, descaling, clearing, pruning, clean, thinning, clear) is monitored according to established plans and in compliance with the applicable rules.

3 RP: Carry out the control of pests and plant diseases in the wild, according to the life cycle of the species and established protocols, in order to maintain and preserve the natural environment.

3.1 CR detected the presence of pests, diseases and other damage of biological or mechanical origin that can affect forests, according to Protocol established for the completion of the report established.

3.2 CR counts or thresholds of plague and useful fauna counts are performed at each control point, according to Protocol established.

CR 3.3 counts and sampling are performed with instruments and at the established time, according to the life cycle of each plague, parasite or predator.

3.4 CR equipment personnel, means of implementation, products and doses for localized in small areas and aerial treatments of large surfaces, are monitored according to the characteristics of the pest or disease to be treated, so that the effects on the environment are minimized.

CR 3.5 tabs/sketch of field in the area of detection of pests and diseases forest, is completed according to the programme.

4 RP: Watch the tasks of prevention, forest fire suppression and restoration of burned areas, in accordance with the plan and established protocol, to prevent forest fires, or restoration of the natural environment, complying with the applicable rules.

CR 4.1 the flare-up of fire or dangerous situations are detected, according to established protocol.

4.2 CR intervention in the preparation of reports, records of complaints and / or packed, when the activity or concession in the natural environment is likely to cause forest fires, is carried out according to established protocol.

CR 4.3 the authorization and implementation of activities in the natural environment are monitored, according to established protocol and in conditions of safety, for the prevention of forest fires.

CR 4.4 intervention in campaigns of sensitization and information to the population about safe fire in agricultural activities and hiking use, is carried out according to established protocol.

CR 4.5 the performance in a fire, is carried out according to the applicable regulations.

CR 4.6 fire fighting methods, are applied in a coordinated manner with other equipment and means involved in the extinction, according to the established plan.

CR 4.7 the parties and record of incidents, damage and statistics related to the extinction of the fire is completed according to established protocol, for later use in research of causality, complaints, grants and subsidies, among others.

CR 4.8 burned lands are monitored avoiding actions restricted or prohibited, by controlling the evolution of the vegetation in the area burned, attending the technical visits to the area burned for the planning of actions to undertake, and supervising forestry work or restoration, as set out in the applicable legislation.

RP 5: Carry out the control of invasive alien species in the natural environment in accordance with the eradication plans approved to maintain and conserve the natural environment.

CR 5.1 species follow-up is carried out according to approved protocols and networks of existing invasive alien alert.

CR 5.2 the eradication of exotic species is carried out according to protocols approved, monitoring the disposal of remains.

CR 5.3 information to the population, to prevent the advance of invasive alien species, occurs through awareness-raising campaigns.

CR 5.4 the advance of exotics, without eradication plans approved, is controlled by invasive exotic alert networks.



Professional context: means of production: machinery for the treatment of scrub and herbaceous tapestry. Machinery and means for planting. Instruments of measurement dasometric. Instrument of surveying and topography. Instrumental measurements on plane. Machinery and tools for the cultural work of the soil. Machinery and equipment for the treatment of the flight. Equipment, tools and materials intended for fire-fighting. Personal protection and first aid equipment. Detection and application of pest and diseases control equipment. Teams of phytosanitary treatments. Plant material for planting or sowing. Plants protectors. The biological control of forest pests and phytosanitary products. Protective pruning wounds. Oils and fuels. Tools for maintenance and small repairs. Various construction materials.



Products and results: supervised the restoration forestry and hydrological-forestry work. Watched the own treatments work silvicultural forests. Made the control of pests and plant diseases in the wild. Watched the tasks of prevention, forest fire suppression and restoration of burned areas, in accordance with the plan and established protocol, and in compliance with applicable law.



Used or generated information: planning of the work. Technical information about the processes and methods used in afforestation, forestry work and defence of the forest masses. Sampling criteria and tables of cubage and valuation of forest products. Legislation in the field of reforestation, silvicultural treatments and fire-fighting. Cartography and aerial photography. Regulations on the use of plant protection products, employment limitations and tolerable levels of waste. Field sheets. Manual of plant protection products with its active matter and toxicity. Technical regulations for the manufacture, marketing and use of pesticides. Proceedings of denunciation and overcrowded. Catalogues of invasive alien species. Plans for the eradication of invasive alien species.



TRAINING module 1: activities of public and protection of the top NATURAL level M use: 3 code: MF0083_3
Associated with the UC: control and monitor natural spaces and public use duration: 210 hours capabilities and evaluation criteria: C1: analyze the elements of construction, services, itineraries, works of preparation and conditioning of the natural environment, according to the public utility of the natural space.

CE1.1 list of building materials according to the natural environment.

CE1.2 specify the equipment and signals according to the usefulness of the route in the natural environment.

CE1.3 quote the applicable legislation in the regulation of the construction and use of infrastructure for recreational and educational use in the natural environment.

CE1.4 in a practical course of preparation of a report on the State of conservation of a route in the natural environment, from given conditions:-list the parts of a report on the State of conservation of a route in the natural environment.

-Identify the status, use of infrastructure and recreational and educational facilities of the route, according to established procedure.

-Select the material support to the information.

-Fixed calendar of inspection according to the route maintenance protocol.

CE1.5 in a practical course of analysis of a route for public use, from given conditions:-establish the topography of the terrain, flora, fauna, landscape and conditions of use of the route.

-Select the items of service in accordance with the public use of the route.

-To develop the graphic material of the route, according to the public use of the same.

C2: Carry out the supervision and control of the natural environment, following the plan of protection of the natural environment established.

CE2.1 identify areas for monitoring visitors and intruders, according to the plan of protection of the natural environment.

CE2.2 operate with cartography, compass, GPS, binoculars and streaming media, in the monitoring and control of the natural environment.

CE2.3 describe the elements of a drawing (scale, dimensions, representation systems) representation.

CE2.4 identify the methods and instruments of measurement of terrain, orientation and location, according to the protection of the natural environment.

CE2.5 list the parts of the report of a suspected infringement committed in the natural environment.

CE2.6 in a practical course of surveillance and control of the natural environment, from given conditions:-use the essential functions of a radio transmitter controls, according to Protocol established.

-Locate the place where the communication is established in an effective manner.

-Communicate messages with clear, intelligible language, specific and brief.

C3: Analyze the plant and animal species of the natural space to maintain the ecological balance, according to the plan of conservation or recovery of the species.

CE3.1 describe the relations between living beings and their environment, according to the aspects of their biology and geographical distribution.

CE3.2 distinguish methods of sampling, monitoring and capture of species, according to established procedure.

CE3.3 explain wildlife health control measures, according to established protocols.

CE3.4 Select the collection, storage and transport of samples, according to established protocol.

CE3.5 reports about diversity, density, distribution, behaviour and health status of the species in the natural environment.

CE3.6 interpret the plans of recovery and/or conservation of protected species.

CE3.7 in a practical course of analysis of plant species and animals in a natural area, based on a few conditions:-identify the flora and fauna present in the countryside.

-Identify signs and traces of animals, according to established procedure.

-Identify symptoms and pathogenic agents of the species of the natural space, following established protocols.

-To develop census and surveys of the species, according to established protocols, for their subsequent control.

-Take samples and prepare them according to established protocol, for shipment to the laboratory.

C4: Analyze the operations of control of residues or waste, plants or animals to the wild, according to established procedure.

CE4.1 identify the physical contaminants of natural spaces.

CE4.2 explain the processes of contamination of the natural areas, according to the pollutant (waste, landfill plant or animal).

CE4.3 interpret the applicable legislation on pollution in the natural environment.

CE4.4 in a so-called practical analysis of the operations of waste control, poured vegetable or animal, from a given conditions:-select the sampling of waste and/or waste, plants or animals, according to the procedure laid down for each of them.

-Select the container transfer of sampling, according to established procedure.

-The report on observations «in situ» of the management of waste in the natural environment.

C5: Protect the constituent elements of the palaeontological and historical heritage of the natural environment, complying with the applicable rules.

CE5.1 identify historical and paleontological remains in wilderness.

CE5.2 Select cultural actions and protection of sites new or existing, complying with the applicable rules.

CE5.3 in a practical course of protection of paleontological and historic heritage of the natural environment, from given conditions:-reporting the finds of fossils, indicating location, characteristics and ownership of the soil, among others.

-Report the findings of historical remains, indicating location, characteristics and ownership of the soil, among others.

-Quantify the aggressions to the heritage historical, paleontological, according to established procedure.

-Validate the aggressions to the heritage historical, paleontological, according to established procedure.

C6: Identify the parameters that define the conservation of natural spaces according to criteria of preservation of biodiversity in the area of the European Union.

CE6.1 identify the community and national legislation developed by the Natura 2000 network (RN2000).

CE6.2 appoint the management plans of the conservation areas of the 2000 in the scope of RN.

CE6.3 list the procedures of monitoring of the status of habitats and species of areas of special conservation (ZEC) of the RN2000.

CE6.4 in a practical course of conservation of a natural area, based on a few conditions:-identify the management plan for the conservation areas of the RN2000, according to the given conditions.

-Select the parameters that define the conservation of the natural area.

-Identify the procedure for tracking the status of habitat and species of the natural area, according to the given conditions.

Skills whose acquisition must be completed in a real work environment: C1 with regard to CE1.4 and CE1.5; C2 regarding CE2.6; C3 on CE3.7; C4 on CE4.4; C5 regarding CE5.3; C6 with respect to CE6.4.

Other skills: be responsible for the work that develops and the fulfilment of the objectives.

Demonstrate a degree of autonomy in the resolution of contingencies related to its activity.

Propose alternatives with the aim of improving results.

Show friendliness, kindness and conciliatory and sensitive attitude to others.

Participate and collaborate actively in the task force.

Adapt to the organization by integrating into the system of technical/professional relations.

Interpret and execute work instructions.

Convey information with clarity, orderly, clear and accurate.

Act quickly in situations of danger.



Contents: 1. Ecology concepts of ecology.

Ecological climatic nature, soil, physiographic and hydrological, biotic factors.

Dynamics of populations.

Typology of ecosystems.



2. the natural environment and balance of a natural space biology, distribution, ecology and conservation of the different plant species present in the natural environment.

Biology, distribution, ecology and conservation of the different animal species present in the natural environment.

Damage caused by wild herbivores and domestic, recognition of symptoms and damage, preventive measures.

Damage caused by man, corrective measures, preventive action.

Estimation of populations: surveys and censuses, footprints and remains of animals.

Techniques of capture and tracking, marking, ringing, signaling.

Sampling of animal remains.

Plans for use and management of the territory, features, key parts.

Areas included in the Natura 2000 network. Monitoring of the conservation status of habitats and species. Plans of management of special conservation areas in the 2000 RN.



3. contamination of water water cycle.

Concepts of Instream.

General indicators of pollution.

Alterations in water indicative of pollution.

Consequences for the balance of the natural environment.

Sampling.

Control and pollution of waters, uses and regulations.



4 techniques of surveillance and control: interpretation of maps and orientation in the natural environment, buildings and traditional rustic materials in the forms area and detection points. Surveillance and management of devices. Visitors access controls.

Defence: use. Ground patrols.

Mapping feature of the natural environment.
Instruments used for the interpretation of maps and orientation in the natural environment. Features and regulations of itineraries in the natural environment.

Construction materials. Features. Public use and signaling equipment. Regulations on buildings and installations in the natural environment.



5. use public spaces: techniques of communication and attention to groups of visitors natural areas, protected areas, areas of public use, applications and regulations.

Communication apparatus, radio communication networks, features and maintenance. Oral, visual and written communication.

Itineraries in the natural environment, material audiovisual and graphic.

Techniques, materials and appliances used.

Implementing legislation.



6. environmental impact concept. Types. Valuation.

Environmental impact and ecological damage caused by human activities.

Precautions and measures that must be taken to avoid or minimize damage.

Impact and the damage caused, correction techniques.



7 paleontological heritage and historical training.

Classes.

Surveillance.

Conservation.

Applicable regulations.



8. legislation on protection and management of the public use of the natural environment international, European, national and regional.

Legislation on environmental impact assessment.

Legislation of mountains: mountains, forest laws of the Autonomous Communities Act, regulations, livestock trails.

Prosecution of criminal offences.



Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.



Professional profile of the trainer or trainer: professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the control and surveillance of the natural spaces and public use, which will be using one of the following ways:-academic education of level 2 (Spanish framework for higher education qualifications), engineering, technical architecture , Diploma or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.



TRAINING module 2: CONTROL and surveillance of the exploitation of natural resources level: 3 code: MF0084_3 associated with UC: control the exploitation of forest resources and mine General duration: 90 hours capabilities and evaluation criteria: C1: analyze the characteristics of the planning of the forestry, according to technical management plans.

CE1.1 interpret the technical specifications of a project of utilization of forest products.

CE1.2 explain the methods of treatment of forest species, according to technical management plans.

CE1.3 describe the characteristics of the exploitation of forest products, according to the forestry plan.

CE1.4 in a practical course of analysis of the planning of the forestry, from given conditions:-identify the permanent forest area where it is authorized the exploitation of wood.

-Indicate the area or areas of forest plantation, according to the forestry planning.

-Indicate the area of forest that will be harvested to dedicate land to other uses.

C2: Verify the characteristics of the works of exploitation of forest products, according to the established planning.

CE2.1 list the characteristics of the systems, techniques and working procedures of the exploitation of wood, firewood and other forest products, according to the established plan.

CE2.2 explain systems assessment, measurement and marking of stocks and a forestry products, according to the given conditions.

CE2.3 in a practical course of validation of the work's exploitation of forest products, from given conditions:-identify the systems, techniques and procedures in each of the phases of use.

-Attend auctions of use of wood in public montes, as planned.

-Analyze the layout and features of the network of tracks and paths out, according to the use of forest products.

C3: Check with the rules of forest and environmental character according to work of utilization of forest products.

CE3.1 list with the rules relating to the work of utilization of forest products.

CE3.2 describe the environmental impact and ecological damage caused by the work of utilization of forest products.

CE3.3 identify the techniques to avoid or correct, the environmental impact and ecological damage caused by work of utilization of forest products, according to applicable regulations.

CE3.4 in a practical course of verification of the regulation of forest and environmental nature in the utilization of forest products, from given conditions:-confirm the execution of the use of forest products, according to applicable regulations.

-Fill out the preliminary and final minutes of work exploitation of forest products, according to applicable regulations.

-Identify the impact and ecological damage caused by the work of use, according to applicable regulations.

-Establish the driving conditions of the products obtained, according to applicable regulations.

C4: Verify the characteristics of the works of exploitation of minerals, mines and quarries, according to applicable regulations.

CE4.1 enumerate techniques, characteristics and procedures of the exploitation of minerals, mines and quarry.

CE4.2 in a practical course of verification of the works for the exploitation of minerals, mines and quarries in the natural environment, from given conditions:-analyze applications for granting of mineral extraction in the natural environment, according to applicable regulations.

-Interpret the documents of a project of mineral exploitation, according to the works of established exploitation of minerals, mines and quarries.

Skills whose acquisition must be completed in a real work environment: C1 with regard to CE1.4; C2 regarding CE2.3; C3 on CE3.4; C4 regarding CE4.2.

Other skills: be responsible for the work that develops and the fulfilment of the objectives.

Demonstrate a degree of autonomy in the resolution of contingencies related to its activity.

Propose alternatives with the aim of improving results.

Show friendliness, kindness and conciliatory and sensitive attitude to others.

Participate and collaborate actively in the task force.

Adapt to the organization by integrating into the system of technical/professional relations.

Interpret and execute work instructions.

Convey information with clarity, orderly, clear and accurate.

Act quickly in situations of danger.



Contents: 1. technical plans and projects of forest products characteristics, fundamental, flat parts, specification techniques.

Achievement, concept and types.

Forestry and environmental legislation in the works for the exploitation.



2. treatment of treatments in high mountain forests, low and medium.

Specific treatments: Cork, resin, fruits, aromatic plants, medicinal plants, mushrooms and bee-keeping.



3 systems work, appraisals, measurements and road signs, and signs in the forestry operations of measurement devices of measurement and marking, valuation of forestry exploitations.

Phases of the operations of the exploitation of timber and firewood, classification of the different product types.

Systems of other forest products.

Cork: extraction of tree, saca, classification, loading, transport, resin, stimulating products and conservation.

Fruits: collection, saca, transport and storage.

Wild plants and mushrooms: harvesting, packaging, conservation and marketing.

Beekeeping.

Conservation, improvement and exploitation of pastureland systems: characteristics, plant species, livestock management, infrastructure.

Opening and maintenance of roads, tracks, and routes of saca systems: types and specifications.



4 tools, devices, materials, equipment, media and the exploitation of forest products tools and cutting machines.

Means of desembosque and meeting.

Media loading and transport.

Machinery for clearing and grinding debris.

Tools, materials and equipment characteristic of the use of other forest products. Machinery and means for opening and maintenance of roads, tracks, and routes of saca.

Devices and means of the cubing, measurement, weight and capacity of various forest products. Clothing and safety and personal protective equipment.

Use and maintenance techniques.
Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.



Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the control of the exploitation of forest resources and minerals, which will be credited by using one of the following ways:-academic education of level 2 (Spanish framework for higher education qualifications), engineering, technical architecture, diploma or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.



TRAINING module 3: CONTROL and surveillance of the use of LO S resources hunting and fish level: 3 code: MF0085_3 associated with UC: control the use of hunting and fishing resources duration: 90 hours capabilities and evaluation criteria: C1: analysis of biology, habits and geographical distribution of the game species and continental waters, according to the plan of hunting and fish exploitation.

CE1.1 describe the characteristics of hunting and inland habitats of spaces, according to the plan of hunting and fish exploitation.

CE1.2 list the aspects of hunting species and management of inland waters, according to the plan of utilization.

CE1.3 explain the processes of evolution and variation in populations of game species and continental waters.

CE1.4 describe diseases that affect the game species and characteristics of inland waters, for treatment.

CE1.5 describe the main features and biological cycles of predator species and competing to the hunted species and inland waters.

CE1.6 in a practical course of analysis of biology, habits and geographic distribution of the hunted species and continental waters, starting from a given conditions:-calculate the parameters and indices for the evaluation of the State of hunting habitat or inland waters.

-Indicate the control systems of predator species and competing to the hunted species and inland waters.

-Establish the evolution of a population of hunting species and continental waters.

C2: Carry out the supervision and control of the hunted species and continental waters, following the plan of use of hunting and fishing resources.

CE2.1 describe the systems, techniques and procedures for surveillance, monitoring, capture and marking of individuals and hunting populations and inland waters.

CE2.2 explain the characteristics, performance and techniques of use of appliances, equipment and means for surveillance, monitoring, capture and marking of individuals and populations of game species and continental waters.

CE2.3 in a practical course of surveillance and control of the hunted species and continental waters, through the estimation of a device, equipment or medium used in the surveillance, monitoring, capture and marking of hunted species or inland waters:-identify the apparatus, equipment or average employee, relating it to the work.

-Describe the parts, parts or components, apparatus, equipment or average employee surveillance.

-Specify the maintenance of the apparatus, equipment or average employee surveillance.

-Operate the appliance, equipment or average employee surveillance.

CE2.4 in a practical course of surveillance and control of the fish, or hunting habitat from given conditions:-describe the systems, techniques and working procedures in the surveillance and control of hunting or fish habitat, according to the conditions laid down.

-Identify the techniques of preparation for the Census of the population of game or fish, according to established protocol.

-Identify the disease and treatment of a kind of game or fish, according to conditions laid down.

-Describe the systems, techniques and procedures of control of species competitors and predators, according to the conditions laid down.

C3: Differentiated procedures for the improvement of the habitat and repopulation of hunted species and continental waters, according to the planning of use of hunting and fishing resources.

CE3.1 describe the characteristics of the works and works of improvement of the habitat of the hunted species and inland waters, in the use of hunting and fishing resources.

CE3.2 identify grasses species used in the improvement of the habitat of the hunted species.

CE3.3 listing the treatments of tree and shrub vegetation in the improvement of the habitat of the hunted species.

CE3.4 write the characteristics of the plant of ribera and aquatic species used as shelter and feed species of inland water area.

CE3.5 explain the characteristics, infrastructure and equipment of facilities of breeding in captivity of the hunted species and continental waters.

CE3.6 detailing the systems, techniques and procedures of repopulation of hunted species and continental waters.

CE3.7 in a practical course of analysis of the procedure of the habitat improvement and repopulation of hunted species and continental waters, starting from a given conditions:-describe the characteristics of the construction and materials used in the improvement of the habitat, according to established procedure.

-Indicate the grasses species established in the procedure for improvement.

-Identify the treatments of shrub and tree vegetation established in the procedure.

-Identify plant riparian or aquatic species as per the procedure to improve Habitat.

-Identify the systems, techniques and restocking procedures set out in the upgrade procedure.

CE3.8 in a practical course of improving habitat and repopulation of hunted species and continental waters, from a tool, appliance, machine, equipment or average employee in the work of the habitat improvement and repopulation of hunted species or inland waters:-identify the tool, appliance, machine, equipment or average employee, relating it to work or set operation.

-Describe the parts, parts or components of the tool, appliance, machine, equipment or average employee, describing their role in the process.

-Explain the management tool, equipment, machine, equipment or average employee in the work of improving the habitat and repopulation of hunted species or inland waters.

-Explain the maintenance of the tool, appliance, machine, equipment or average employee in the work of improving the habitat and repopulation of hunted species or inland waters.

-Operate the tool, appliance, machine, equipment or average employee in the work of improving the habitat and repopulation of hunted species or inland waters, according to established procedure.

C4: Interpret the rules applicable to activities of hunting, fishing and environmental, in the hunting area and freshwater management.

CE4.1 describe illegal activities of hunting, fishing and environmental, in the hunting habitat and inland waters, according to the legislation and regulations applicable state and/or regional.

CE4.2 identify fishing gear, weaponry and other supplies and equipment for the practice of hunting and fishing, according to the legislation and regulations applicable state and/or regional.

CE4.3 express the functioning of legal hunting areas and inland waters, and federations and of hunting and fishing, according to applicable state and/or regional societies.

CE4.4 identify the powers, responsibilities and their relationship with the public administrations of the hunting areas and inland waters, attending State or autonomic legislation.

CE4.5 describe the scales of assessment in hand and in field of hunting trophies, according to applicable state and/or regional regulations.

CE4.6 rating a trophy hunt on naturalized material or on the hunting ground, attending State or autonomic legislation.

CE4.7 in a practical course of management of hunting space or inland waters, starting from a given conditions:-differentiate the applicable environmental regulations, in the management of hunting space or inland waters.

-Identify the illegal performance of hunting, fishing and environmental, hunting habitat and inland waters, according to applicable state and/or regional regulations.

-Identify the legal rule infringed, according to applicable state and/or regional regulations.

-Describe the equipment and media used in the detection of the illegal action.

-Drafting the report of the violation, according to applicable state and/or regional regulations.
Skills whose acquisition must be completed in a real work environment: C1 with respect to CE1.6; C2 CE2.3 and CE2.4; C3 on CE3.7 and CE3.8; C4 regarding CE4.7.

Other skills: be responsible for the work that develops and the fulfilment of the objectives.

Demonstrate a degree of autonomy in the resolution of contingencies related to its activity.

Propose alternatives with the aim of improving results.

Show friendliness, kindness and conciliatory and sensitive attitude to others.

Participate and collaborate actively in the task force.

Adapt to the organization by integrating into the system of technical/professional relations.

Interpret and execute work instructions.

Convey information with clarity, orderly, clear and accurate.

Act quickly in situations of danger.



Contents: 1. species hunting, of inland waters, competing and predatory hunting and inland water species: biology, habits of behavior, geographical distribution at national and regional level, species of game, identification, observation, collection, sorting and conditioning of materials and signals obtained in the field.

Populations of game species and continental waters: Dynamics of populations, control and monitoring: techniques, the hunted species and management of inland waters, plans of hunting and fish exploitation, processing, application, the hunted species and diseases of inland waters, treatments and procedures of monitoring, protection and capture of game species and continental waters, teams and media use and maintenance techniques.

Species competitors and predators: biology, habits of behavior, geographical distribution at national and regional level, identification, observation, collection, sorting and packaging materials and signs obtained in the field.



2 habitat and hunting species of inland waters, and procedures for the improvement of the habitat of the hunted species and inland Habitat: characteristics, habitat elements, parameters to evaluate the State of a habitat.

Procedures for the improvement of the habitat: constructions and installations, materials, equipment and means, tools, equipment and media, techniques for use and maintenance, planting in the hunting area, species, improvement of shrub and tree vegetation, treatments, plantation and conservation of riparian vegetation and aquatic.

Restocking of game species and continental waters: breeding in captivity, hunting farms and fish farms, reforestation, systems, techniques and procedures, facilities, machinery, equipment and media, use and maintenance.



3 methods of hunting and fishing rules, valuation of trophy hunting and fishing patterns: characteristics, types of hunting and fishing areas, regulation, operation.

Federations and societies of hunters and fishermen: characteristics, regulations, performance, armament, types of weapons and ammunition, fishing craft, industrial and sporting gear and licenses.

Regulations upon hunting and fishing: environmental State and autonomous, normative standards implementation in the game species and continental waters, poaching, illegal practices of hunting and fishing, detection, the violation report, regulation of weapons.

Assessment of game trophies: scales and valuation tables official trophy of the different hunting species, in hand and field assessment, techniques and procedures.



Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.



Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the control of the use of hunting and fishing, resources which will be using one of the following ways:-academic education of level 2 (Spanish framework for higher education qualifications), engineering, technical architecture, diploma or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.



TRAINING module 4: CONTROL and surveillance of the restoration, maintenance, management and defense of wilderness level: 3 code: MF0086_3 associated with UC: monitor and assist in the operations of restoration, maintenance, management and defense of natural resources duration: 210 hours capabilities and evaluation criteria: C1: explain components of the works of implementation of trees and shrubs in the mount and hydrological According to the characteristics of the natural spaces.

CE1.1 explain the parts that make up a project of forestation, reforestation or hydrological-forestry, detailing the features and objectives of each of them.

CE1.2 describe the characteristics of the tree species used in afforestation, according to the characteristics of the natural areas.

CE1.3 describe the systems, techniques and working procedures of the phases and the process of reforestation operations, characteristics of natural spaces.

CE1.4 define the characteristics of the plant material used in the reforestation.

CE1.5 describe the types of constructions of hydrological correction, according to the characteristics of the natural areas.

CE1.6 in a practical course of reforestation of a natural area, based on a few conditions:-identify the aspects and forecasts of the reforestation project.

-Identify the machinery, tools, tools, equipment and means according to reforestation work.

-Indicate the deviations and/or qualitative and/or quantitative defects of the work with respect to the planning of established reforestation.

-Identify the machine, apéro, tool, material, medium or own reforestation works team.

CE1.7 in a practical course of hydrological-forestry correction, from given conditions:-describe the type and model of work of hydrological-forestry correction, in accordance with the restoration projects.

-Identify the building material established in restoration projects.

-Describe the system of work established in restoration projects.

-Identify the machinery, tools, equipment and media used in restoration projects.

C2: Identify treatments forest soil and the flight of the forest masses and auxiliary works, for their inventory and management, according to the plans of management and protection of natural areas.

CE2.1 describe the parts of the project management and technical management plans.

CE2.2 explain the concepts and the technical terminology of forestry.

CE2.3 list treatments forest soil and flight of the forest masses and the logical sequence of execution of them, according to the plans of management and protection of natural areas.

CE2.4 quote systems, techniques and working procedures of the treatments silvicultural forests, according to defence of natural areas planning.

CE2.5 in a practical course of identification of treatments forest soil and the flight of a forest, from a project management or management plan for the natural areas and given conditions:-identify the aspects and forecasts of treatments forest soil and flight of a forest, according to the project management or technical management plan.

-Identify, according to project management or technical plan of management, silvicultural treatments and the previous and auxiliary works established for forest inventory and management.

-Describe the systems, techniques and work procedures in project management or technical management plan.

-Identify the machinery, tools, tools, appliances, equipment and media established in project management or technical management plan, for each operation.

-See deviations and/or qualitative and quantitative defects of the work with respect to the existing planning.

C3: Specify the procedures for detection and control of pests, diseases and other disorders of forests, according to the plan of defence against pests and diseases.

CE3.1 Express alterations of forests, grouping them by type of causative agents.

CE3.2 describing systems of control of the agents causing alterations in the forest masses, laid down in the plan of defence against pests and diseases.

CE3.3 explain the characteristics of treatment of pests and forest diseases, according to the established procedure.
CE3.4 identify the agents abiotic and biotic cause of alterations in the forests, according to the plan of defence against pests and diseases.

CE3.5 in a practical course of analysis of the procedure of detection and control of pests, diseases and alterations of forests, from given conditions:-detection systems and techniques for detection and control of pests, diseases and disorders of forests, set out in the working procedure.

-Identify the machinery, tools, tools, appliances, equipment and means laid down in the procedure of detection and control of pests, diseases and disorders of forests.

-Describe deviations and/or qualitative and quantitative defects of the work with respect to the existing planning.

-Specify the calendar of surveillance and control of pests and diseases, in accordance with the procedure of detection and control of pests, diseases and disorders of forests.

C4: Explain the characteristics of the work of prevention, monitoring and forest fire, according to the plan of Defense of our natural spaces.

CE4.1 describe the characteristics of a forest fire, enumerating the causes and the stages of the fire.

CE4.2 enumerate the types and characteristics of forest fires.

CE4.3 explain the elements of a forest fire and the factors that determine its importance.

CE4.4 describe the devices and systems of prevention and alert against forest fires and its operation.

CE4.5 name the operations and actions in the process of extinction of a forest fire.

CE4.6 recognize the systems, techniques and procedures of forest fire control.

CE4.7 define the characteristics of coordination of forest firefighting operations involving personnel from various agencies.

CE4.8 in a practical course of prevention, alert or extinguishment of forest fires, from given conditions:-describe the systems, techniques and procedures of action, according to the conditions given.

-Identify the machinery, equipment and media used in the prevention, alert or extinguishment of forest fires.

-Distinguish the human and material resources in prevention, alert, or extinguishment of forest fires.

-Fill in the parts and record of information about the characteristics of forest fire and its extinction.

C5: Interpreting the regulations of forest and environmental nature in the work of restoration, maintenance, management and protection of natural resources.

CE5.1 describe the work of reforestation, silvicultural treatments, inventories, control of changes in forests, prevention and firefighting, according to forestry and environmental legislation.

CE5.2 describe the environmental impact and ecological damage caused by works of reforestation, silvicultural treatments, treatments for pests, diseases and forest fire control.

CE5.3 in a practical course of work of reforestation, silvicultural treatments, inventories, control of changes in forests, prevention and firefighting, from given conditions:-identify the forest and environmental regulations applicable to the work of reforestation, silvicultural treatments, inventories, control of changes in forests, prevention and extinction of fire.

-Assess the degree of implementation of the forestry and environmental legislation in the works of reforestation, silvicultural treatments, inventories, control of changes in forests, prevention and extinction of fire.

-Identify the impact and ecological damage caused by the work of reforestation, silvicultural treatments, inventories, alterations in the forest masses control, prevention and extinction of fire.

C6: Control the eradication of invasive alien species in the natural environment, following the approved eradication protocols.

CE6.1 identify the catalogs of invasive alien species and eradication plans.

CE6.2 interpret the biology of invasive alien species.

CE6.3 distinguish the vectors that are conducive to the emergence and expansion of invasive alien species.

CE6.4 list the climatic and anthropogenic factors that allow its expansion.

CE6.5 in a practical course of eradication of exotic species in the natural environment, from a given exotic species:-identify exotic species, according to the catalogue of invasive alien species.

-Describe the life cycle of the exotic species and reproduction.

-Select eradication technique, according to the established plan of eradication.

Skills whose acquisition must be completed in a real work environment: C1 with regard to CE1.6 and CE1.7; C2 regarding CE2.5; C3 on CE3.5; C4 on CE4.8; C5 regarding CE5.3; C6 with respect to CE6.4.

Other skills: be responsible for the work that develops and the fulfilment of the objectives.

Demonstrate a degree of autonomy in the resolution of contingencies related to its activity.

Propose alternatives with the aim of improving results.

Show friendliness, kindness and conciliatory and sensitive attitude to others.

Participate and collaborate actively in the task force.

Adapt to the organization by integrating into the system of technical/professional relations.

Interpret and execute work instructions.

Convey information with clarity, orderly, clear and accurate.

Act quickly in situations of danger.



Contents: 1. projects of afforestation, reforestation and forest characteristics and key parts of the project, species used in the reforestation of forest, characteristics of the species.

Systems, techniques and procedures of afforestation: delimitation of the surface and preliminary work, treatment of the herbaceous tapestry or scrub preparation of terrain, sowing or planting, reinstatement of yore, machinery, implements, tools, appliances, equipment and media use and maintenance techniques needs of human and material resources.

Forest restoration: actions of biological control of erosion, crops and plantations, works and works of hydrological correction, systems and procedures, cross-cutting works to the runway, characteristics, types, longitudinal works, features and types, machinery, tools, equipment and materials, human and material resources.

Forest management and technical management plans projects: features, key parts, periodic reviews.



2 forestry concepts basic forestry, cultural characters of forest species, types.

Forest silvicultural treatments: treatments of soil and of flight. Systems, techniques, and procedures of the silvicultural treatments: instruments, apparatus, machinery, tools, tools and equipment, utilization and maintenance, human and material resources.



3. auxiliary works for the inventory and management of forests inventory, procedures and modalities.

Signs: techniques of preparation.

Measuring magnitudes analyses: use and maintenance techniques.



4. detection of pests, diseases and other disorders of the forest masses causing agents of alterations and damage, classification, biotic and abiotic agents.

Damage-causing organisms: morphology and biology, species affected, type of injury, Symptomatology, identification.

Pests, diseases and other disorders treatment: biological control, integrated, systems chemistry.

Treatment: preventive and curative, terrestrial and aerial characteristics, means, machinery and equipment and techniques for use and maintenance, products, rates, mode of action, preparation, human and material resources.



5. forest fire elements, types, characteristics, causes, stages, areas and ways.

Elimination system and reducing forest fuel, belts and areas firewall, auxiliary belts of tracks and controlled burning of scrubland.

Machinery, tools, tools and equipment, utilization and maintenance techniques, human resources and materials.

Prevention of forest fires, infrastructure of prevention and early warning, security posts, fixed and mobile, operation of the devices alert, location and identification of the forest fire.

Systems of transmission, equipment, means and equipment, utilization and maintenance techniques. Extinguishing of forest fires, systems, techniques and procedures, machinery, tools, equipment and media, techniques for use and maintenance, air facilities, features and equipment.

Equipment protection, first aid, evacuation of injured.

Agencies that may be involved in the extinction, coordination, operational modalities, the operations management, remote only or collegiate.

Documentation to be completed after a forest fire.

Ecological damage of the works of reforestation and silvicultural treatments, treatment of pests and diseases and extinction of fires.



6 impact environmental concept, types, valuation.

Environmental impact and ecological damage caused by human activities.

Precautions and measures that must be taken to avoid or minimize damage.
Impact and the damage caused, correction techniques.

Invasive alien species. Catalogues. Biology of the species. Eradication plans. Vectors of expansion.



7. applicable regulations and safety regulations on protection and management of the public use of the natural environment: International, European, national and regional.

Regulations on environmental impact assessment, regulation of forestry and environmental character in works of restoration, maintenance, management and protection of forests.

Law of mountains; forestry laws of the autonomous communities; Normative cattle trails.

Regulations on occupational health and safety. Specific safety rules in the working environment.

Security in the handling of equipment, machinery and transport vehicles: risks associated with the handling of machinery, storage and features of specific individual work teams. Preventive maintenance of equipment and machinery.

(EPI's) personal protective equipment: protection of head, face and neck, specific protection of limbs, other protective gear: harnesses, belts, among others.



Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.



Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to surveillance and collaboration in the operations of restoration, maintenance, management and protection of natural resources, which will be using one of the following ways:-academic education of level 2 (Spanish framework for higher education qualifications), engineering, technical architecture, diploma or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.