Key Benefits:
In compliance with the provisions of Article 11 (f) of the Infrastructure for Quality and Industrial Safety Regulation, approved by Royal Decree 2200/1995 of 28 December ("Official State Gazette", No. 32, of 6 February 1996) and having regard to the standards developed by the European standards bodies, CEN, CENELEC, ETSI and whose national transposition corresponds to the Spanish Association for Standardisation and Certification designated by Order of the Ministry of Industry and Energy of 26 February 1986, in accordance with Royal Decree 1614/1985 of 1 August 1985, and recognized for this purpose by the additional provision of Royal Decree 2200/1995 of 28 December 1995.
This Directorate General has resolved to publish in the "Official State Gazette" the list of European standards that have been ratified as Spanish standards during the month of July 2015, identified by its title and code numerical, indicating their date of availability, which are listed as an annex to this resolution.
Madrid, September 3, 2015. -Director General Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Ratification of European Standards. July 2015
Title | F. Availb. | Anula | |
---|---|---|---|
CEN ISO/TR 17424:2015 | Intelligent transport systems. Cooperative systems. State of the art of local dynamic maps (ISO/TR 17424:2015). | 2015 -05-13 |
|
CEN ISO/TS 18750:2015 | Intelligent transport systems. Cooperative systems. Definition of a global concept for local dynamic maps (ISO/TS 18750:2015). | 2015 -05-27 |
|
CEN ISO/TS 19321:2015 | Intelligent transport systems. Cooperative systems. Dictionary of information data structures in vehicles (IVI) (ISO/TS 19321:2015). | 2015 -04-22 |
|
CEN/TR 13445-101:2015 | Uncalled pressure-ins. Example of application. | 2015 -04-22 |
|
CEN/TR 13445-102:2015 | Part 102: Example of vertical container application with support supports. | 2015 -05-13 |
|
CEN/TR 15745:2015 | Liquid oil products. Determination of the hydrocarbon families and the oxygenated content by means of multidimensional chromatography in gaseous phase. Interlab test report. | 2015 -04-29 | UNE-CEN/TR 15745:2009 IN |
CEN/TS 13388:2015 | Copper and copper alloys. Inventory of the compositions and products. | 2015 -05-13 | UNE-CEN/TS 13388:2010 EX |
CEN/TS 14014:2015 | Postal Services. Hybrid mail. Letter enveloping XML definition for automatic postal treatment. | 2015 -05-06 | CEN/TS 14014:2006 |
CEN/TS 16702-1:2014 | Electronic Peage. Safe control for autonomous toll systems. Part 1: Compliance control. | 2014-11-05 |
|
CEN/TS 16702-2:2015 |
Electronic toll. Safe control for autonomous toll systems. Part 2: Trusted registrars. | 2015 -03-25 |
|
CEN/TS 16765:2015 |
LPG equipment and its accessories. Environmental considerations for CEN/TC 286 standards. | 2015 -04-22 |
|
CLC/TS 50238-2:2015 | Railway applications. Compatibility between rolling stock and train detection systems. Part 2: Compatibility with track circuits. | 2015 -05-22 |
|
3645-001:2015 | Aerospace. Circular electrical connectors, with protected contacts, with triple-input threaded coupling, operating temperatures between 175 ° C or 200 ° C continues. Part 001: Technical specification. | 2015 -05-27 | EN 3645-001:2013 |
3645-002:2015 | Aerospace. Circular electrical connectors, with protected contacts, with triple-input threaded coupling, operating temperatures between 175 ° C or 200 ° C continues. Part 002: Specifying performance and placement of contacts. | 2015 -06-03 | EN 3645-002:2007 |
3646-007:2015 | Aerospace. Connectors, electrical, circular, bayonet splicing, operating temperature 175 ° C or 200 ° C. Part 007: Hermetic receptacle, with round flange, mounted by soldering or heavy welding. Product Standard. | 2015 -05-27 | EN 3646-007:2006 |
3646-009:2015 | Aerospace Material. Connectors, electrical, circular, bayonet splicing, operating temperature 175 ° C or 200 ° C. Part 009: Protective cover for the receptacle. Product Standard. | 2015 -05-27 | EN 3646-009:2006 |
3646-010:2015 | Aerospace Material. Connectors, electrical, circular, bayonet splicing, operating temperature 175 ° C or 200 ° C. Part 010: Protective cover for plug. Product Standard. | 2015 -05-27 | EN 3646-010:2006 |
4056-001:2015 | Aerospace Material. Flanges for harness cables. Part 001: Technical specification. | 2015 -06-03 | EN 4056-001:2006 |
4652-001:2015 | Aerospace. Coaxial radiofrequency connectors. Part 001: Technical specification. | 2015 -05-27 |
|
6049-001:2015 |
Aerospace material. Electrical cables, installation. Protective sheath in meta-aramides fibers. Part 001: Technical specification. | 2015 -05-27 |
|
45502-1:2015 |
Active implantable healthcare products. Part 1: General requirements for security, marking and information to be supplied by the manufacturer. | 2015 -05-22 |
|
60063:2015 | Series of preferred values for resistors and capacitors. | 2015 -05-22 |
|
60115 -8-1:2015 | Fixed resistances for use in electronic equipment. Part 8-1: Special framework specification. Fixed surface mounting low-power film resistors for general electronic equipment, classification level G. | 2015 -05-22 |
|
60286-2:2015 | Packaging of components for automatic handling. Part 2: Packaging components with unidirectional outputs over continuous tapes. | 2015 -06-05 |
|
60398:2015 | Installations for Electrothermal and Electromagnetic Treatment. General operation test methods. | 2015 -06-05 |
|
60404-5:2015 |
Magnetic Materials. Part 5: Materials (magnetically hard) permanent magnets. Methods of measurement of magnetic properties. | 2015 -05-29 |
|
60404-8-1:2015 | Magnetic Materials. Part 8-1: Specifications for individual materials. Hard magnetic materials. | 2015 -05-29 |
|
60519-1:2015 |
| 2015 -05-22 |
|
60601-1-11:2015 | Electromedical Equipment. Part 1-11: General requirements for basic safety and essential functioning. Collateral Standard: Requirements for the electrocedic equipment and the electrodic system used for care in the home medical environment. | 2015 -05-22 |
|
60601-1-12:2015 | Electromedical Equipment. Part 1-12: General requirements for basic safety and essential functioning. Collateral Standard: Requirements for electromedical equipment and electromedical systems intended for use in the emergency medical services environment | 2015 -05-22 |
|
60601-2-3:2015 | Electromedical Equipment. Part 2-3: Particular requirements for basic safety and the essential functioning of short-wave therapeutic equipment. | 2015 -05-22 |
|
60601-2-6:2015 | Electromedical Equipment. Part 2-6: General requirements for basic safety and essential operation of microwave therapy equipment. | 2015 -05-22 |
|
60601-2-8:2015 | Electromedical Equipment. Part 2-8: General requirements for the basic safety and essential functioning of radiation therapy X-ray equipment operating in the range of 10 kV to 1 MV. | 2015 -06-05 |
|
60601-2-10:2015 | Electromedical Equipment. Part 2-10: General requirements for basic safety and the essential functioning of nerve and muscle stimulators. | 2015 -05-22 |
|
60601-2-11:2015 | Electromedical Equipment. Part 2-11: Particular requirements for basic safety and the essential functioning of gammaterapia equipment. | 2015 -05-22 |
|
60601-2-16:2015 | Electromedical Equipment-Part 2-16: Particular requirements for basic security and essential operating characteristics of hemodialysis, hemodiafiltration and hemofiltration equipment. | ||
Electromedical Equipment. Part 2-17: Particular requirements for the basic safety and essential functioning of the automatically controlled brachytherapy deferred load equipment. | 2015 -05-22 |
| |
60601-2-24:2015 | Electromedical Equipment-Part 2-24: Particular requirements for basic security and the essential operation of pumps and perfusion controllers. | ||
Electromedical Equipment. Part 2-26: General requirements for basic security and the essential functioning of electroencephalograms. | 2015 -05-22 |
| |
60601-2-33:2010/A1:2015 | Electromedical Equipment. Part 2-33: Particular requirements for the basic safety and essential functioning characteristics of magnetic resonance imaging equipment for medical diagnosis. | 2015 -05-22 |
|
60601-2-36:2015 | Electromedical Equipment. Part 2-36: Particular requirements for basic safety and the essential functioning of the extracorporously induced lithotricia equipment. | 2015 -05-22 |
|
60601-2-47:2015 | Electromedical Equipment. Part 2-47: Particular requirements for basic safety and the essential functioning of ambulatory electrocardiography systems. | 2015 -05-22 |
|
60601-2-62:2015 | Electromedical equipment. Parte2-62: Particular requirements for basic safety and the essential functioning of high intensity ultrasound systems for therapeutic purposes (HITU). | 2015 -05-22 |
|
60601-2-63:2015 | Electromedical Equipment. Part 2-63: Particular requirements for the basic safety and essential functioning of the extra-oral dental x-ray equipment. | 2015 -05-29 |
|
60601-2-64:2015 | Electromedical Equipment. Part 2-64: Particular requirements for the basic safety and essential functioning of light-ion beam medical equipment. | 2015 -05-29 |
|
60601-2-68:2015 | Electromedical Equipment. Part 2-68: Particular requirements for the basic safety and essential functioning of X-ray imaging equipment for use with electron accelerators, light-ion ray therapy systems and therapy systems radionuclide ray. | 2015 -05-29 |
|
60627:2015 | Diagnostic Equipment by X-ray image. Characteristics of the anti-diffuser grids of use general and mammography. | 2015 -05-22 |
|
61169-51:2015 | Radio Frequency Connectors. Part 51: Intermediate specification for radiofrequency coaxial connectors with inner diameter of 13.5 mm outer conductor with bayonet joint. Feature impedance of 50 ohms (type QLI). | 2015 -05-22 |
|
61970-452:2015 | Application programming interface for power management systems (EMS-API). Part 452: CIM static transmission network model profiles. | 2015 -05-22 |
|
62135-2:2015 | Electrical welding equipment by resistance. Part 2: Electromagnetic compatibility (CEM) requirements. | 2015 -05-08 |
|
62220-1-1:2015 | Electromedical Equipment. Features of digital X-ray imaging devices Part 1-1: Determination of quantum detection efficiency. Detectors used in obtaining radiographic images. | 2015 -06-12 |
|
62541-3:2015 | OPC Unified Architecture. Part 3: addressable space model. | 2015 -05-29 |
|
62541-4:2015 |
OPC Unified Architecture. Part 4: Services. | 2015 -05-29 |
|
62541-5:2015 | Unified Architecture OPC. Part 5: Information Model. | 2015 -05-29 |
|
62541-6:2015 | Unified Architecture OPC. Part 6: Mapping. | 2015 -05-29 |
|
62570:2015 | Magnetic resonance equipment for medical imaging. Instructions for marking elements within a controlled access area. | 2015 -05-22 |
|
62657-2:2015 | Industrial communications networks. Wireless communication network. Part 2: Managing coexistence. | 2015 -05-22 |
|
62810:2015 |
Measure of the complex permittivity of the low-loss dielectric bars by the cylindrical cavity method. | 2015 -05-22 |
|
62889:2015 | Digital Video Interface. gigabit video interface for multimedia systems. | 2015 -06-05 |
|
80601-2-30:2010/A1:2015 | Electromedical Equipment. Part 2-30: Particular requirements for the basic safety and essential functioning of non-invasive automatic sphygmomanometers. | 2015 -05-22 |
|
80601-2-58:2015 | Electromedical Equipment. Part 2-58: Particular requirements for the basic safety and essential functioning of the lens removal devices and vitrectomy devices for ophthalmic surgery. | ||
80601-2-60:2015 | Electromedical Equipment. Part 2-60: Particular requirements for the basic safety and essential functioning of dental equipment. | 2015 -05-22 |
|
EN ISO 16610-1:2015 | Geometric product specification (GPS). Filtration. Part 1: General perspective and basic concepts (ISO 16610-1:2015). | 2015 -04-22 |
|
ISO 16610-20:2015 | Geometric product specification (GPS). Filtration. Part 20: Linear Profile Filters: Basic Concepts (ISO 16610-20:2015). | 2015 -04-29 |
|
ISO 16610-29:2015 | Product Geometric Specification (GPS). Filtration. Part 29: Linear Profile Filters: Unwavy Slots (ISO 16610-29:2015). | 2015 -05-13 |
|