Resolution Of 10 Of September Of 2015, Of The Address General Of Industry And Of The Small And Medium Company, By Which Is Publishes The Relationship Of Standards Une Voided By The Association Spanish Of Normalization And Certification During The Month...

Original Language Title: Resolución de 10 de septiembre de 2015, de la Dirección General de Industria y de la Pequeña y Mediana Empresa, por la que se publica la relación de normas UNE anuladas por la Asociación Española de Normalización y Certificación durante el mes...

Read the untranslated law here: http://www.boe.es/buscar/doc.php?id=BOE-A-2015-10385

(In compliance of it willing in the article 11, f), of the regulation of the infrastructure for the quality and security Industrial, approved by Real Decree 2200 / 1995, of 28 of December («Bulletin official of the State», number 32, of 6 of February 1996), and seen the record of cancellation of standards presented by the Association Spanish of standardization and certification, entity designated by order of the Ministry of industry and energy of 26 of February of 1986 , in accordance with the Royal Decree 1614 / 1985, of 1 August, and recognized by the first additional provision of the aforementioned Royal Decree 2200 / 1995 of 28 December.

This Directorate-General has resolved to publish in the «Official Gazette», the relationship of Spanish standards UNE cancelled during the month of August 2015, identified by his title and numeric code, which appears as annex to the present resolution.

Madrid, 10 September 2015.-the Director-General of industry and small and medium-sized enterprises, Víctor Audera López.

ANNEX rules voided in the month August of 2015 code title IN 61240:1997 devices piezoelectric. Preparation of sketch of devices for surface mounting (SMD) for control and frequency selection. General rules. (Ratified by AENOR in December of 1997).






IN 62439-3:2010 networks of communication industry. Networks of automation of high availability. Part 3: Parallel redundancy (PRP) and high availability (HSR) homogeneous Ring Protocol. (Ratified by AENOR in June of 2010).






140400:2003 intermediate specification: fixed resistors of surface mounting of low dissipation (SMD) (ratified by AENOR in April 2004).






UNE 20532:1973 diameter nominal for threads of resistors and capacitors.






UNE-EN 385:2002 joints by union notched structural timber. Specifications and manufacturing requirements.






UNE-EN 845-1:2005 + A1:2008 specification for ancillary components for masonry factories. Part 1: keys, moorings, hangers, brackets and angles.






UNE-EN 845-2:2005 specification for ancillary components for masonry factories. Part 2: lintels.






UNE-IN 845-3:2006 + A1: 2008 specifications of components auxiliary for factories of masonry. Part 3: Board of horizontal joint reinforcement of steel mesh armor.






UNE-EN 1790:1999 materials for horizontal road marking. Prefabricated road markings.






UNE-EN 13225:2005 for concrete precast products. Linear structural elements.






UNE-EN 13225:2005 / Ac:2007 precast concrete products. Linear structural elements.






UNE-EN 13808:2005 bitumens and bituminous binders. Specifications of bituminous emulsions cationic.






UNE-EN 13808:2005 / m:2011 1, bitumens and bituminous binders. Specifications of bituminous emulsions cationic.






UNE-EN 14080:2006 wooden structures. Glulam. Requirements.






UNE-EN 14080:2006 ERRATUM:2010 wooden structures. Glulam. Requirements.






UNE-EN 14342:2006 + A1:2009 hardwood floors. Characteristics, evaluation of conformity and marking.






UNE-IN 14509:2007 panels sandwich insulation self-supporting of double face metal. Products made at the factory. Specifications.






UNE-IN 14509:2007 / AC: 2009 panels sandwich insulation self-supporting of double face metal. Products made at the factory. Specifications.






UNE-EN 14733:2006 + A1:2011 bitumens and bituminous binders. Control of the production in factory of the emulsions bituminous, and them bitumens fluxados and fluid.






UNE-IN 14764:2006 bike of walk. Requirements of safety and methods of test.






UNE-IN 14766:2006 bicycle of mountain. Requirements of safety and methods of test.






UNE-IN 14781:2006 bicycles for racing. Requirements of safety and methods of test.






UNE-IN 14783:2008 sheets and strips of metal fully supported for covers and coatings Interior and foreign. Specification of product and requirements.






UNE-EN 14915:2007 friezes and spraying celings and decking wood. Characteristics, assessment of the conformity and marking.






UNE-IN 14915:2007 / AC: 2007 friezes and plank of wood. Characteristics, assessment of the conformity and marking.






UNE-IN 15037-4:2010 products precast of concrete. Systems of wrought of joist and slab. Part 4: blocks of polystyrene foam.






UNE-IN 15322:2010 bitumens and binders bituminous. Structure of the specification of the binders bituminous fluid and fluxados.






UNE-IN 15382:2009 barriers geosinteticas. Characteristics required for use in transport infrastructure.






UNE-EN 60317-48:2000 specifications for particular types of threads for electromagnetic coils. Part 48: Thread circular copper, bare or enamelled, jacketed fiberglass impregnated with resin or varnish, index of temperature 155.






UNE-EN 60317-49:2000 specifications for particular types of threads for electromagnetic coils. Part 49: Circular copper, bare or enamelled, jacketed fiberglass impregnated with resin or varnish, index of temperature 180 thread.






UNE-EN 60317-50:2000 specifications for particular types of threads for electromagnetic coils. Part 50: Circular copper, bare or enamelled, jacketed fiberglass impregnated with resin or varnish, index of temperature 200 thread.






UNE-EN 60432-3:2004 filament lamps. Safety requirements. Part 3: Tungsten (except the vehicles) halogen lamps.






UNE-EN 60432-3:2004 / A1:2006 filament lamps. Safety requirements. Part 3: Tungsten (except the vehicles) halogen lamps (IEC 60432-3:2002 / A1:2005).






UNE-EN 60432-3:2004 / A2:2009 filament lamps. Safety requirements. Part 3: Tungsten (except the vehicles) halogen lamps.






UNE-EN 60734:2004 household appliances. Fitness for the role. Hard water for testing.






UNE-EN 60893-3-1:2004 insulating materials. Rigid industrial laminate planks with resins thermoset for electrical purposes. Part 3-1: Specifications for individual materials. Requirements for types of industrial rigid laminated sheets.






UNE-IN 61326-1:2006 Material electric for measurement, control and use in laboratory. Electromagnetic compatibility (EMC) requirements. Part 1: General requirements (IEC 61326-1:2005).






UNE-EN 61326-2-3:2007 Material electrical measuring, control and laboratory use. Electromagnetic compatibility (EMC) requirements. Part 2-3: Particular requirements. Configuration testing, operating conditions and criteria of suitability for the function for transducers with integrated or remote signal conditioning. (IEC 61326-2-3:2006).






UNE-EN 61326-2-4:2007 Material electrical measuring, control and laboratory use. Electromagnetic compatibility (EMC) requirements. Part 2-4: Particular requirements. Configuration testing, operating conditions and criteria of performance in accordance with the standard IEC 61557-8 insulation monitoring devices and equipment insulation in accordance with the standard IEC 61557-9 fault location. (IEC 61326-2-4:2006).






UNE-IN 61643-11:2005 lightning rod of low voltage. Part 11: lightning rod connected to systems electrical of low voltage. Requirements and tests.






UNE-IN 61643-11:2005 / A11: 2007 lightning rod of low voltage. Part 11: lightning rod connected to systems electrical of low voltage. Requirements and tests.






UNE-IN 61788-13:2004 superconductivity. Part 13: Measurement of losses in alternating current. Methods of measurement for magnetometer of losses due to hysteresis in composite multifases of Cu/Nb-Ti.






UNE-EN 62282-6-200:2008 fuel cell technologies. Part 6-200: Micro fuel systems. Methods of performance test.