Order Pre/2055/2015, On 1 October, Which Are Updated Two Professional Qualifications Of The Professional Family Textiles, Clothing & Leather, Collected In The National Catalogue Of Professional Qualifications, Established By Royal Decree 1...

Original Language Title: Orden PRE/2055/2015, de 1 de octubre, por la que se actualizan dos cualificaciones profesionales de la familia profesional Textil, Confección y Piel, recogidas en el Catálogo Nacional de Cualificaciones Profesionales, establecidas por Real Decreto 1...

Read the untranslated law here: http://www.boe.es/buscar/doc.php?id=BOE-A-2015-10776

Organic law 5/2002, of 19 June, qualifications and vocational training, aims in the management of an integrated system of vocational training, qualifications and accreditation, to respond with efficiency and transparency to the social and economic demands through training practices. To do so, creates the national system of qualifications and vocational training, defining it in article 2.1 as a set of instruments and actions necessary to promote and develop the integration of offers of training, through the national catalogue of professional qualifications, as well as the evaluation and accreditation of the corresponding professional skills, in such a way that it promotes professional and social development of the people and the needs of the production system are covered.

The national catalogue of professional qualifications, according to article 7.1, is created with the purpose of facilitating the integrated nature and the adequacy between vocational training and the labour market, as well as lifelong training, the mobility of workers and the labour market unit. This catalogue is constituted by the qualifications identified in the productive system and the training associated with them, which is organised in training modules.

Article 5.3 of the organic law 5/2002, of 19 June, attributed to the National Institute of qualifications, the responsibility to define, develop and keep updated the national catalogue of professional qualifications, in his capacity as technical support body to the Council General of vocational training, whose regulatory development contained in article 9(2) of the Royal Decree 1128 / 2003 , 5 September, which regulates the national catalogue of professional qualifications, establishing in its article 9.4, the obligation to keep it permanently updated through periodic review which, in any case, must be made within a period not exceeding five years from the date of inclusion of the qualification in the catalog.

This order is issued pursuant to the Royal Decree 817/2014, of 26 September, which lays down the specific aspects of professional qualifications for as amended, procedure of approval and effects is therefore implementation article 7.3 of the organic law 5/2002 of 19 June.

Thus, in the present order is updated, by replacing its annexes, two professional qualifications of the professional textile family, making comprehensive and skin with an antique in the national catalogue of professional qualifications more than five years, that is applicable the Royal Decree 817/2014, of 26 September.

In the process of elaboration of this order the autonomous communities have been consulted and they have issued report the General Council for vocational training and the State School Board.

In his virtue, a joint proposal from the Minister of education, culture and sport and Minister of employment and Social Security, have: article 1. Object and scope of application.

This ministerial order aims to update, leading to the replacement of the relevant annexes, two professional qualifications corresponding to the professional family textiles, clothing & leather, included in the national catalogue of professional qualifications, in application of the Royal Decree 817/2014, of 26 September, which establishes the specific aspects of professional whose modification qualifications procedure of approval and effects of application article 7.3 of the organic law 5/2002, of 19 June, qualifications and vocational training.

Up-to-date professional qualifications are valid and are applicable throughout the national territory and do not constitute a regulation of professional practice.

Article 2. Update of certain qualifications professionals family professional textile, clothing and leather, established by Royal Decree 1087 / 2005 of 16 September, which establish new professional qualifications, which are included in the national catalogue of professional qualifications, as well as its relevant training modules, which are incorporated into the Modular catalogue of vocational training, and updates certain vocational from those laid down by the Royal Decree 295/2004 , 20 February.

Pursuant to the sole additional provision of the Royal Decree 1087 / 2005, of 16 September, proceed to update professional skills, whose specifications are contained in annexes pgsql and CXXXIX of the aforementioned Royal Decree: one. A new wording is given at Annex CXLVIII, qualified professional operations auxiliary of upholstered furniture and mural. Level 1. TCP136_1, which appears as annex I of this order.

Two. A new wording is given at Annex CXXXIX, qualified professional repair of footwear and leather goods. Level 1. TCP139_1, which appears as annex II to this order.

First final provision. Skill-related title.

This order is issued in virtue of the powers that he attributes to the State the article 149.1. 1st and 30th of the Constitution, on regulation of the basic conditions that guarantee the equality of all Spaniards in the exercise of rights and in the fulfilment of the constitutional duties, and for the regulation of the conditions of procurement, issuance and recognition of academic and professional qualifications.

Second final provision. Entry into force.

This order shall enter into force the day following its publication in the "Official Gazette".

Madrid, from October 1, 2015.-the Vice-President of the Government and Minister of the Presidency, Soraya Sáenz de Santamaría Antón.

Annex I professional qualification: Operations auxiliary of upholstery of furniture and wall family professional: textile, clothing and skin level: 1 code: TCP136_1 general competence deburred, prepare, assemble and assemble upholstered furniture and mural, applying techniques and procedures in each process, making items with quality on schedule, in conditions of safety and respect for the environment.

Competition UC0428_1 units: serve the customer and perform sourcing for processes of upholstered UC0429_1: make the tamping, preparation and mounted of the upholstered furniture UC0430_1: perform framing, trim and lining of walls, upholstered wall panels environment professional scope professional develops his professional activity in the area of production of clothing dedicated to operations in support of upholstered furniture and mural in entities of a public or private nature in medium-sized or small company, both on their own and of others, irrespective of their legal form. It develops its activity depending on your case, functional and/or hierarchical from a superior. In the development of the professional activity apply the principles of universal accessibility in accordance with the applicable legislation.

Sectors production is located in the productive sector of textile, clothing and skin, in the sub-sector on the upholstered furniture and mural.

Occupations and jobs relevant terms from the following list of occupations and jobs are used with generic and all-inclusive nature of women and men.

Tapestry of furniture artisan weavers, in general tapestry of vehicles Enteladores training associate (330 hours) training modules MF0428_1: materials and upholstery (60 hours) MF0429_1 services: upholstered furniture (180 hours) MF0430_1: Entelado of walls and upholstered wall panels (90 hours) unit of competition 1: serve the customer and perform the PROVISIONING for processes trim level : 1 code: UC0428_1 professional accomplishments and performance criteria: RP 1: serve the customer in the establishment of upholstery to determine according to instructions of the personnel responsible for service.

CR 1.1 the client's needs are met according to the characteristics of the same, according to the service request.

CR 1.2 customer requirements are identified, using questions and active listening techniques to determine the service you may need.

CR 1.3 complaints and claims of customers exceeding their responsibility, are transmitted to the staff responsible for immediately, under the procedure laid down.

2 RP: Make the reception and storage of furniture to repair, according to criteria and preset instructions and, where necessary, under the supervision of the personnel responsible for.

CR 2.1 receipt of furniture is made by filling in the registration form with the data of the customer, type of furniture, and the possibility of repair.

CR 2.2 damage of the upholstered furniture are detected, indicating the failures of materials caused by an improper manufacture or wear by use.

CR 2.3 repair operations are determined by observing the deterioration in the Cabinet.

CR 2.4 the repair is carried out according to rate taking into account technical, aesthetic and quality characteristics.

2.5 CR furniture and/or materials accepted, with your repair order, are organizing themselves into containers or areas willing to effect.


2.6 CR established procedures and material handling are made, according to the applicable regulations of prevention in occupational health and environmental protection.

3 RP: Perform reception, distribution and storage of goods for later use, in accordance with criteria of quality and preset instructions and, if necessary, under the supervision of staff.

3.1 CR materials received are labeled by identifying them for their immediate control.

3.2 CR established procedures and material handling is done neatly, following the instructions received.

CR 3.3 identified materials are stored in containers or areas willing to effect according to the labeling for later use.

CR 3.4 temperature, humidity, lighting store adapt, maintaining materials in perfect packaging.

4 RP: Use materials (threads, fabrics, non-woven fabrics, leathers, accessories, auxiliary products, among others), according to their characteristics, for application in the process of upholstery, where, under the supervision of staff.

4.1 CR materials and products are prepared according to the order of manufacture process of upholstery, according to the directions of the staff responsible for.

CR 4.2 skins displayed comparing model, characteristics (dimensions, thickness, prestes and items or lots, among other defects) and applications, forming lots for the repair of upholstered items, according to tab technique and instructions for staff.

CR 4.3 auxiliary materials and accessories (foams, crin vegetal or animal, wadding, among others) are prepared according to their shapes or characteristics, relating them with the operations of the datasheet for the sequencing of them, under the supervision of staff.

CR 4.4 preparation and materials handling procedures are performed by complying with the applicable rules of health and safety and environmental protection.

Professional context: means of production: fabrics, non-woven, skin, leather and accessories (foams, crin vegetal or animal, wadding, among others). Spring or springs (spires, arches and planes). Brackets (jute and rubber straps). Trimmings and gear, accessories and/or prefabricated components, gallons, tassels, head nails, tacks and tacks in mold. Yarns, Twine and rope. Adhesives and glues, silicones and solvents. Prices list. Containers.

Products and results: basic customer service. Resolution of complaints and grievances. Reception and storage of goods. Textile, leather and auxiliary accessories for the upholstered furniture and murals.

Information used or generated: physical samples, datasheets, supports Visual, graphic and computer systems. Schemes of processes. Purchase orders. Customer's demand. Conservation tag. Label of origin or provenance. Classification instructions. Delivery notes. Chips with tests. Repair orders. Delivery of receipt of the item. Client, source and date of collection identification tag.

Unit 2 competition: Make the MANLESS, preparation and mounted the upholstery on furniture level: 1 code: UC0429_1 realizations professionals and completion criteria: RP 1: organize the workstation, making stocks according to the order of upholstered, in order to achieve the required quality, in the established time.

1.1 CR article, raw materials, techniques and procedures to be followed in the process of upholstery are identified by analyzing the order of upholstered.

CR 1.2 identified materials supply sufficient quantity and with the required quality, according to the article to upholster, according to the conditions agreed upon with the client.

1.3 CR measures or templates contained in the order of upholstered parts are checked by comparing them with the dimensions of the parts from the dismantled from the article.

RP 2: Operations, adjustments and maintenance of first level of machines and tools for the upholstered furniture, according to established procedures, and where appropriate, under the supervision of staff.

2.1 CR tools and machines are prepared according to the requirements of the order of upholstered and types of materials used.

2.2 CR elements the machine (cut, assembled and mounted, among others) operators and tools conform, regulating them according to the material.

CR 2.3 conditions of operation of the machines and tools are modified by resetting on the basis of the results of the test operations.

CR 2.4 first level maintenance is carried out according to the technical documentation, detecting failures of productive elements of machines and replacing the damaged or worn to restore operating conditions.

3 RP: Perform the underdressed or removed covers and padding upholstered structures, identifying parts and order of removal for use as a template and, if necessary, under the supervision of staff.

CR 3.1 the extraction procedure is performed according to the preset sequence (outer cover and inside, filling and suspension or support, among others), according to the procedures, applying criteria of safety.

CR 3.2 extracted materials (upholstered or stuffed) parts are marked and identified with the corresponding name, indicating the direction in which they were placed.

CR 3.3 list of the component parts is made in the order that is van by removing, as a reference for the mounted in reverse order.

3.4 CR position and direction of folds, as well as the specifics to take into account are flagged in the removed items, indicating it in the template or pattern.

CR 3.5 templates or patterns are made from reproduction on paper or carton of removed items, indicating the corresponding signs.

4 RP: Mark parts and accessories, taking into account the characteristics of materials, for his subsequent court, and if necessary, under the supervision of staff.

4.1 CR materials (tissue or outer skin, lining, filling, brackets, backing, among others) are prepared to take account of their conditions (texture, color, drawing, defects, among others).

CR 4.2 tissue extends on the table according to the procedure (monolayer or multilayer, no pleats, lined, with stress, sense of thread and address, among other).

CR 4.3 positioning of skins is done by checking the pay, without tension and without folds, facilitating the marking and cutting.

4.4 CR extended inserts (wadding, fleece, foam, and others) is fastened on the table preventing their mobility, facilitating their marking and cutting back.

CR 4.5 parts are marked from the shape or dimension of the pattern or template, pointing out pickets and drilling, according to specifications.

CR 4.6 cutting is performed by procedures and techniques established, complying with the applicable rules of safety, adjusting precisely designated size, without deformation of the profiles of the pieces, and shape marking pegs and holes.

CR 4.7 cut components identified are grouped according to the order of Assembly for the upholstery.

CR 4.8 generated documentation is carried out according to established procedures.

5 RP: Assembled by stitching or other techniques of union, the prepared pieces of materials and accessories for the upholstered with the quality provided for in the order of production according to instructions received.

CR 5.1 preparation for the Assembly is performed according to the technical information of the production order.

CR 5.2 parts and/or materials prepared quality checks, according to the shape, appearance and location of ornaments or jewelry findings according to production order, correcting potential anomalies.

CR 5.3 the union is carried out taking into account the characteristics of the material, the type of Assembly that must be applied, in the preset sequence and comply with the applicable rules of health and safety.

CR 5.4 auxiliary and ornamental elements (tassels, buttons, braids and others) are incorporated according to design.

5.5 CR allowances (box pads, cushions, among others) and/or articles are reviewed according to the quality criteria laid down in the technical details of production.

CR 5.6 anomalies or small defects are corrected under the responsibility of the operator, and communicating to the responsible person.

CR 5.7 the generated documentation is carried out according to established procedures.

6 RP: Operations the mounting of the upholstery according to the features of each unit and, where appropriate, under the supervision of staff.

CR 6.1 the solidity of the structure or the cabinet frame is checked to support the process mounted the upholstery according to the technical details of production.

CR 6.2 structure or frame of the Cabinet prepares for the assembled, according to the technical details of production.

CR 6.3 suspension elements are positioned, according to structure (girths, springs, corrugated strips and other), fixing it to the frame so that it is tight, complying with the applicable rules of health and safety.

6.4 CR filler (foams, crin vegetal or animal, wadding, and others) is distributed by adjusting it to the structure and form of the model, applying procedures and established techniques.


CR 6.5 the entretelado of components (seats, fronts, arms) is fastened to the frame through the indicated elements (adhesives, Staples, nails, screws, pins and others), modeling to achieve symmetry and volume according to established techniques and procedures.

CR 6.6 exterior trim and siding (bottom and back) cover is carried out by fixing the parts corresponding to each area, applying procedures and established techniques, adjusting it to the structure and form of the model.

6.7 CR decorative elements (tassels, buttons, braids and others) are applied in the places indicated according to model.

CR 6.8 generated documentation is carried out according to established procedures.

Professional context: means of production: tables and equipment for cutting, cutting machines. Die-cutting machine. Labeling machine. Machines for sewing flat: of topstitching straight, zig-zag, triple drag. Coating machine (overlock). Machine column. Machine cover buttons. Machine pins. Gluing and welding machines. Stapling machine. Different ironing jobs. Equipment preparation and operative maintenance of machines. Personal protective equipment.

Products and results: upholstered furniture items.

Used or generated information: workshop staff work orders. Technical manuals for the machines. Manual handling of machinery and equipment. Instructions for maintenance and security. With applicable rules of prevention in occupational health and environmental protection. Consumption of materials. Result of products. Incidences.

Unit 3 competition: Perform framing, trim and lining of walls, and UPHOLSTERED wall panels level: 1 code: UC0430_1 realizations professionals and completion criteria: RP 1: organizing work for the covering of walls, ceilings or wall panels upholstered, interpreting the production order.

CR 1.1 order upholstery is interpreted identifying item, raw materials, techniques and procedures in the process of lining of walls, ceilings or wall panels upholstered.

CR 1.2 identified materials supply sufficient quantity and with the required quality, according to the article to upholster, according to the conditions agreed upon with the client.

1.3 CR measures or templates of the parts contained in the order of the coated fabric are checked by comparing them with the dimensions of the parts of the removed from the article.

2 RP: Prepare machines and tools to adjust them in a first level of maintenance according to the production order and, where appropriate, under the supervision of staff.

CR 2.1 preparation of the machines and tools is carried out according to the order of upholstered or scrim.

CR 2.2 operators of machines (cut, assembled, finished) elements conform regulating them on the basis of the materials according to the production order.

CR 2.3 machines (cutting, Assembly and finishing) parameters are reset to be regulated according to the results of the test operations.

CR 2.4 the maintenance of first level is performed with arrangement to it documentation technical, detecting them failures of them elements productive of them machines and replacing them damaged or worn, within the responsibility assigned and fulfilling the normative applicable of security and health.

3 RP: Mark cloths or panels for the coated fabric, from the characteristics of the materials, by cutting and assembling them according to the order of production and where appropriate, under the supervision of staff.

3.1 CR material (fabric without sewing or stitching, fleece or batting, and others) is prepared according to their characteristics (texture, color, drawing, defects, and others), number of pieces, among others for its extended later in the Court according to the procedure table.

CR 3.2 parts are positioned according to the shape or dimension of the panels or panels, controlling the situation of reasons, facilitating cutting operation, complying with the applicable rules of health and safety.

CR 3.3 cut components are identified by grouping them according to the order of Assembly, checking that parts match the established criteria, separating the defective ones and replacing them.

CR 3.4 components are assembled according to the characteristics of the material, the type of sewing or other unions.

3.5 CR anomalies or defects are corrected under the responsibility of the personnel, communicating to staff.

CR 3.6 the generated documentation is carried out according to procedures.

4 RP: Preparing marco-bastidor and fleece or padding for each panel, placing them to the scrim wall and ceiling, and, where appropriate, under the supervision of the personnel responsible for.

CR 4.1 the State of the surfaces that will be covering is checked, avoiding the existence of highlights that may impair tissue or the appearance of the coated fabric, according to Factsheet production.

CR 4.2 strips of cardboard or battens (soft wood slats) are prepared to be placed in a frame frame according to the technical specifications and procedures.

CR 4.3 the gaps in the walls (doors, windows, switches) are bordering with slats, facilitating subsequent fixing of the coated fabric.

CR 4.4 the fleece is placed into the marco-bastidor, fixing it according to procedures avoiding ripples when you have is the tissue.

CR 4.5 the coated fabric panels or cloths ready for each wall, with or without fleece, is for clip on frame, according to technical data, complying with the applicable rules of safety and health directly.

CR 4.6 Finish to hide the staples is performed on cornices with molding, gallon or upholstery tape and at the bottom with skirting board, preventing the deterioration of the fabric.

CR 4.7 anomalies or small defects are corrected under the responsibility of the personnel, communicating to staff.

CR 4.8 generated documentation is carried out according to procedures.

RP 5: Operations of upholstered wall panels for headboards, screens, rigid galleries or pelmets, taking into account the characteristics of materials, and, if necessary, under the supervision of the staff responsible for.

CR 5.1 materials (fabric, foam rubber, fleece among others) are prepared according to model or form of chipboard or plywood, and according to the procedure and the technical data plate.

CR foam rubber 5.2 or fleece is placed in the order shown in production order and is fixed on the plate by tail of contact or Staples, according to the article, complying with the applicable rules of health and safety.

CR 5.3 tissue is available on the rubber foam or fleece, focusing the motives or drawings, securing with staples on the basis of the article, modeling, achieving symmetry and volume, for procedures and techniques established according to the production order.

CR 5.4 article is taut and staple on the back, lining it according to the procedures and the technical data sheet.

CR 5.5 the front finish is carried out according to the article, by hiding the staples and sticking attachments, (trim, lace or Ribbon trimmings and others).

CR 5.6 anomalies or small finish defects are corrected under the responsibility of the personnel, informing the responsible person.

CR 5.7 the generated documentation is carried out according to procedures.

Professional context: means of production: tables and equipment for cutting, cutting machines. Die-cutting machine. Labeling machine. Flat sewing machines: Straight stitch, zigzag, triple drag. Overlock sewing machine. Machine column. Gluing and welding machines. Stapling machine. Ironing jobs. Equipment preparation and operative maintenance of machines. Personal protective equipment.

Products and results: wall and ceiling scrim. Headboards, screens, rigid galleries or pelmets.

Used or generated information: internal rules of work. Procedures, manufacturing, technical orders. Technical manuals for the machines. Manual handling of machinery and equipment. Policy of prevention in occupational health and environmental protection. Consumption of materials. Result of products. Incidences.

TRAINING module 1: materials and services in upholstery level: 1 code: MF0428_1 associated with UC: serve the customer and perform sourcing for processes of upholstered duration: 60 hours capabilities and evaluation criteria: C1: apply communication techniques in care establishments for upholstery customer following the instructions of personnel responsible for.

CE1.1 describe the qualities that must possess and attitudes which should be developed according to the customer in trade relations.

CE1.2 identify the variables involved in the behavior and motivations of the client according to the client's requirements.

CE1.3 in a practical course at the customer perform the communicative process as part of customer service.

CE1.4 identify the documentation annexed to the operations to the customer according to the procedures.

C2: Receive and store items for trim according to the instructions of a / Manager.

CE2.1 identify techniques for the reception and storage according to materials and products for upholstery.

CE2.2 distinguish defects according to the type of furniture upholstery.

CE2.3 raise budgets of repair depending on rate.

CE2.4 describe procedures for the storage of materials according to technical data sheets.


CE2.5 interpret and fill out sheets of stock/inventory according to procedures.

CE2.6 in a practical course of distribution and storage of goods, from the instructions received from the staff:-label materials according to their characteristics of use.

-Identify the procedures of handling and storage according to the labeling.

-Controlling the temperature, humidity and illumination of the storage areas according to the type of material.

C3: Recognize textiles (yarns, fabrics and non-woven fabrics), depending on the application in the process of upholstery.

CE3.1 identify textile products (yarns, fabrics and non-woven fabrics) according to its labeling.

CE3.2 in a so-called practical of recognition of products textiles discriminate them products textiles visually and by their features as part of the process of selection of materials for the upholstered.

CE3.3 identify treatments for finishing of textiles according to their characteristics.

CE3.4 recognize the characteristics of the textiles products according to reference samples.

C4: Recognize the features of hides and skins according to the article to make.

CE4.1 recognize different types of fur and leather according to its origin and form of presentation.

CE4.2 identify defects in hides and skins as reference samples.

CE4.3 in a practical course of recognition of skins, classify furs and leathers by their origin, characteristics and defects according to reference samples as part of the process of upholstery.

C5: Recognize auxiliary materials and accessories used in the process of upholstery according to instructions of a / Manager.

CE5.1 recognize the characteristics of the materials auxiliary according to technical data.

CE5.2 differentiate supplements, foams, animal or vegetable, horsehair wadding, among others, depending on the application.

CE5.3 relate to auxiliary materials and accessories with the sequence of operations according to the datasheet.

Skills whose acquisition must be completed in a real work environment: C1 with respect to CE1.3; C2 regarding CE2.6; C3 on CE3.2; C4 on CE4.3.

Other skills: be responsible for the work that develops.

Treat the customer with courtesy, respect and discretion.

Demonstrate interest and concern by satisfactorily meet the needs of customers.

Communicate effectively with the right people at any given time, respecting the channels established in the organization.

Get used to the pace of work of the organization.

Convey information with clarity, in an orderly manner, structured, clear and precise respecting the channels established in the organization.

Contents: 1. matter textiles (yarns, fabrics, non-woven fabrics), furs and leathers classification, characteristics and properties.

Elementary identification procedures.

Defects of textiles, furs and leathers.

Finishes.

Commercial presentation.

2. auxiliary materials filling: batting, fleece, vegetable horsehair, feathers, cotton, polyester foam, and others.

Springs: coil of whorls, arches and plans.

Trimmings and accouterments, prefabricated accessories or components.

Ornamental: gallon, tassels, head nails, tacks and tacks in mold.

Yarns, Twine and rope.

3. attention to customer features, functions, attitudes and knowledge.

Communication skills.

Relationships with customers.

Annexed documentation to the sales operations.

Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the attention to the client and implementation of sourcing for processes of upholstery, which will be using one of the following ways:-academic training level 1 (Spanish higher education qualifications framework) or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.

TRAINING module 2: UPHOLSTERED furniture level: 1 code: MF0429_1 associated with UC: make the tamping, preparation and mounted of the upholstered furniture duration: 180 hours capabilities and evaluation criteria: C1: organizing job, according to the order of upholstered.

CE1.1 identify items, raw materials and processes used in the upholstery according to the manufacturing order.

CE1.2 in a practical course of organization of work identify the materials as part of the article to manufacture according to production order.

CE1.3 check the dimensions of the parts and components from the disassembled pieces.

C2: Apply first level maintenance machine and tools to trim, according to instructions of a / Manager.

CE2.1 identify the machines and tools according to the order of upholstery.

CE2.2 interpret technical information and manual machines and relate it to the operation, set-up and maintenance of first level.

CE2.3 in a practical course trim mounted, following the instructions of a / person responsible for:-preparing machines, adjusting them as part of the process.

-Apply the maintenance of first level of machine and tools according to the manual of the same.

C3: Make the disassembled or stripped of upholstered furniture by specifying the order of the parts according to the instructions of a / Manager.

CE3.1 describe the procedures of dismantled or stripped from the production sheet upholstered furniture.

CE3.2 identify the procedure of removal of the outer cover and interior, interlining, filling and suspension or support, according to the technical information.

CE3.3 in a practical course of disassembled furniture, following the instructions of a / Manager:-identify the model, parties and their order of disassembled, relating it to the sheet.

-Reproduce the templates or patterns related to signs of the marking of parts.

CE3.4 classify parts that are removed from the Cabinet, as well as the specific details to take into account the new placement and reproduce on paper or carton, according to sheet fabrication.

C4: Prepare and cut materials using different procedures depending on the manufacturing order, applying criteria of safety.

CE4.1 describe the preparation of materials for the upholstery.

CE4.2 in a practical course of cut pieces, according to the instructions of a / Manager:-prepare material according to its characteristics.

-Apply the extended material, detecting any anomalies or defects.

-Apply the marking, running the Court as part of the process of upholstery according to technical data.

-Check the quality of the cut components, communicating the anomalies detected.

-Group cut components, packaging them.

CE4.3 classify cut materials, according to the procedures of the company.

CE4.4 prepare the documentation relating to the cutting process, according to technical specifications.

C5: Operations of preparation and Assembly of parts and accessories of the upholstery according to the production order.

CE5.1 describe the systems of Assembly depending on the type of union, media and materials will be used, depending on the production order.

CE5.2 in a practical course of Assembly of parts and materials, according to instructions received:-prepare the components on the basis of materials that must be assembled.

-Identify the machines, tools and utensils necessary, by selecting each one of them according to the Assembly.

-Select procedures according to certain criteria of Assembly and connecting elements.

-Specify the sequence of operations of Assembly, according to quality criteria established by the company.

-Apply the union of parts and auxiliary materials as part of the production process according to the manufacturing order.

CE5.3 describe the Add-ons (box pads, cushions, among others) and items according to the criteria of quality, under the supervision of a / Manager.

CE5.4 encode the documentation generated according to the procedures of the company.

C6: Operations of preparation and upholstered furniture, assembled according to the orders of a / Manager.

CE6.1 describe procedures mounting of upholstered furniture according to the orders of manufacturing.

CE6.2 identify different materials sorting them according to the upholstery of furniture.

CE6.3 in a practical course the mounting of furniture, according to instructions received:-identify tools and machines by selecting them according to the assembled trim.

-Prepare the structure and (support, filling and cover) furniture components, identifying them.

-Apply the procedures and techniques according to the technical information.

-Carry out the upholstery from the tab of production according to the different elements (filling, coated fabric component material, and others).


CE6.4 encode the documentation generated in the process mounted according to company procedures.

Skills whose acquisition must be completed in a real work environment: C1 with respect to CE1.1; C2 regarding CE2.3; C3 on CE3.3; C4 regarding CE4.2; C5 regarding CE5.2; C6 with respect to CE6.3.

Other skills: be responsible for the work that develops.

Comply with the standards fixed playback.

Complete the work within the stipulated deadlines.

Keep the work area with the degree of order and cleanliness required by the organization.

Interpret and execute commands from working.

Communicate effectively with the right people at any given time, respecting the channels established in the organization.

Contents: 1. furniture upholstered classification. Features.

Types: chairs, stools, Footstools, chairs with armrests, armchairs, sofas and others.

Upholstery of classic furniture: styles, shapes and features.

Upholstered modern furniture: styles, shapes and features.

2. materials employees in the upholstered of furniture fabrics and leather to cover.

Fabric: coating (white), coverage (underlay).

Filling: batting, fleece, vegetable horsehair, feathers, cotton, polyester foam, and others.

Springs: coil of whorls, arches and plans.

Supports: jute and rubber straps.

Trimmings and accouterments, prefabricated accessories or components.

Ornamental: gallon, tassels, head nails, tacks and tacks in mold.

Yarns, Twine and rope.

Adhesives and glues, silicones and solvents.

Characteristics, conservation and safety.

3. General techniques of upholstered furniture filling or trim with coil springs.

Monoblock of foam or similar.

Stripped of furniture, procedure.

Trimmed with webbing or flat springs.

Trim seat, back and arms.

4. method of manufacturing orders of court.

Techniques of extended and positioned for fabric, leather and other materials.

Cutting of different materials.

Cutting system: conventional, pressure and automatic and manual.

Conventional cutting: features and applications. The cutting parameters.

Sequence of conventional cutting operations: shred and tune.

Machines for cutting, tools, weights, clamps clamping, piqueteador, driller.

Preparation of cut components.

Assembly and finishing of loose components.

5. machines, accessories and useful tables and cutting equipment.

Sewing machines: straight, zigzag, triple drag, impregnating (overlock) and other.

Of staple, cover buttons, place snaps, gluing and welding machines.

Different ironing jobs.

Tools and accessories.

6. maintenance of first-level machines, useful and accessories preparation and operating maintenance equipment.

Preventive and corrective maintenance.

Technical manuals of machines.

Manual handling of machinery and equipment.

First level maintenance.

Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the realization of the Manless, preparation and mounted of the upholstered furniture, which will be using one of the following ways:-academic training level 1 (Spanish higher education qualifications framework) or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.

TRAINING module 3: lining of walls and UPHOLSTERED panels wall level: 1 code: MF0430_1 associated with UC: perform framing, trim and lining of walls and upholstered wall panels duration: 90 hours capabilities and evaluation criteria: C1: distinguish processes covering of walls and ceilings and wall panels upholstered.

CE1.1 identify the materials of scrim wall, ceiling and upholstered wall, according to the conditions of customer panels.

CE1.2 interpret the technical information necessary to understand the processes of scrim walls, ceilings and wall panels upholstered.

CE1.3 select the templates of the parts and components related to their direct measures.

C2: Put together machines and basic tools, according to cutting techniques, Assembly or mounted of scrim and materials requirements.

CE2.1 distinguish the elements the cutting, Assembly and finishing machine operators from the same manual.

CE2.2 in a practical case of upholstered furniture apply adjustment and readjustment of the machines as part of the process according to the manual of the same.

In a practical case of upholstered furniture CE2.3 apply the maintenance of machines and tools according to the technical instructions and complying with safety regulations.

C3: Operate in preparation, marking, cutting and Assembly of different materials according to procedure and complying with safety regulations.

CE3.1 classify different types of materials (fabric without sewing or stitching, fleece or batting, and others) for the extended cut, according to order of manufacturing table.

CE3.2 in a so-called practical scrim or upholstered wall, from the manufacturing order, under the supervision of a / Manager:-carrying out marking and cutting the pieces by controlling the reasons, junction points, location of adorno, among others, identifying them to the Assembly.

-Apply the Assembly of parts, confronting the joints according to the reasons and order of Assembly.

CE3.3 describe anomalies and defects in cutting and Assembly of materials by controlling quality according to procedures.

CE3.4 encode the documentation generated in the process preparation, marking, cutting and Assembly according to company procedures.

C4: Prepare the panel for the covering of walls or ceilings by placing the marco-bastidor and fleece or batting in order of production, under the supervision of a / Manager.

CE4.1 describe the procedures of scrim wall or ceiling by different techniques, according to manufacturing orders.

CE4.2 identify tools and techniques used in the process of lining of walls or ceilings, according to procedures.

CE4.3 prepare marco-bastidor, selecting the battens, skirting the holes and placing the fleece, according to technical instructions, under the supervision of a / Manager.

CE4.4 in a practical course of scrim walls and ceilings, elaborate the covering panels hiding Staples, according to Factsheet, under the supervision of a / Manager.

CE4.5 develop the documentation generated in the process covering walls and ceilings according to company procedures.

C5: Organize the preparation and the upholstered wall panels, according to the procedures, under the supervision of a / Manager.

CE5.1 describe the procedures of upholstered wall panels: headboards, screens, rigid galleries, or pelmets by different techniques, controlling parameters involved, according to production chips.

CE5.2 classify the materials used in the upholstered wall panels, according to order of manufacture.

CE5.3 identify the tools and procedures used depending on the type of wall panels.

CE5.4 in a practical course for obtaining headboards screens, rigid or pelmets, develop the upholstered wall panels according to the manufacturing order.

CE5.5 encode the documentation generated in the process of upholstered wall panels (headboards, screens, rigid galleries or pelmets, among others) according to company procedures.

Skills whose acquisition must be completed in a real work environment: C1 with respect to CE1.3; C2 CE2.2 and CE2.3; C3 on CE3.2; C4 on CE4.4; C5 regarding CE5.4.

Other skills: be responsible for the work that develops.

Demonstrate interest and concern by satisfactorily meet the needs of customers.

Complete the work within the stipulated deadlines.

Communicate effectively with the right people at any given time, respecting the channels established in the organization.

Get used to the pace of work of the organization.

Convey information with clarity, in an orderly manner, structured, clear and precise respecting the channels established in the organization.

Contents: 1. wall panels, scrim walls and roof styles, types, shapes and features.

Measurement and calculation of materials.

Techniques of scrim.

2. materials for covering walls, ceilings and wall panels fabrics upholstery.

Findings: borders, interval, tapes, binding strips, laces, trimmings.

Prefabricated accessories or components.

Fillings: batting, fleece, vegetable horsehair, feathers, cotton and others.

3. machines, accessories and useful tables and cutting equipment.

Sewing machines: straight, zigzag, triple drag, impregnating (overlock) and other.

Stapling machines.

Ironing jobs.

Tools and accessories.

4. maintenance of first-level machines, useful and accessories preparation and operating maintenance equipment.

Preventive and corrective maintenance.

Technical manuals of machines.


First level maintenance.

Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the realization of the framed, trim and lining of walls, upholstered wall panels, which will be using one of the following ways:-academic training level 1 (Spanish higher education qualifications framework) or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.

Annex II professional skill: Repair of footwear and leather goods family professional: textile, clothing and skin level: 1 code: TCP139_1 competition general repair cracks and damage, or replace parts on any footwear or leather article, applying the techniques and procedures, making the article restored and completed, on schedule, in conditions of safety and environmental protection.

Competition UC0438_1 units: perform the provisioning and serve the customer for repair of footwear UC0439_1: repair done in articles of leather UC0440_1: environment professional scope professional develops footwear repair done by his professional activity in the area of clothing, dedicated to the repair of footwear and leather and leather goods, in entities of a private nature , enterprises of small or micro-enterprises, both on their own and of others, irrespective of their legal form. It develops its activity depending on your case, functional and/or hierarchical from a superior. In the development of the professional activity apply the principles of universal accessibility in accordance with the applicable legislation.

Sectors production is located in the productive sector of manufacture of footwear and articles of leather goods, in the subsector relating to repair of footwear, leather goods and leather items.

Occupations and jobs relevant terms from the following list of occupations and jobs are used with generic and all-inclusive nature of women and men.

Zapateros-reparadores footwear helpers of leather assistants training associate (270 hours) training modules MF0438_1 shoe repair: materials and services in repair of footwear and leather goods (60 hours) MF0439_1: articles of leather goods (90 hours) MF0440_1 repair: repair of footwear (120 hours) unit of competition 1: perform the PROVISIONING and cater to customer for the repair of footwear level : 1 code: UC0438_1 realizations professional and criteria of realization: RP 1: attend to the customer in the establishment of repair of footwear for determine the service according to instructions of the staff responsible.

CR 1.1 the client's needs are met according to the characteristics of the same, according to the service request.

CR 1.2 customer requirements are identified, using questions and active listening techniques to determine the service you may need.

CR 1.3 complaints and claims of customers exceeding their responsibility, are transmitted to the staff responsible for immediately, under the procedure laid down.

2 RP: Perform reception and storage of articles to fix, in accordance with criteria and preset instructions and, where necessary, under the supervision of the staff responsible for.

CR 2.1 receipt of the footwear or leather article is made by filling in the registration form with the data of the customer, type of item and the possibility of repair.

CR 2.2 damage of items are detected for repairs indicating the failures of materials, caused by an improper manufacture or wear by use.

CR 2.3 repair operations are determined by observing the deterioration in the article for repair.

CR 2.4 the repair is carried out according to rate taking into account technical, aesthetic and quality characteristics.

2.5 CR articles and/or materials accepted, with your repair order, are stored in containers or areas willing to effect.

2.6 CR established procedures and material handling are carried out according to the applicable regulations of prevention in occupational health and environmental protection.

3 RP: Perform reception, distribution and storage of goods, for later use in the repair of footwear and leather goods, in accordance with criteria of quality and preset instructions and, if necessary, under the supervision of staff.

3.1 CR materials received are labeled by identifying them for their immediate control.

3.2 CR established procedures and material handling are carried out following the instructions received.

CR 3.3 identified materials are stored in containers or areas willing to effect according to labeling for later use and location.

CR 3.4 temperature, humidity, lighting store fit keeping materials in perfect packaging.

4 RP: Select materials (skins and leathers, threads, fabrics and non-woven fabrics, auxiliary materials) identifying the origin and characteristics of for its application in the process of repair of footwear and leather goods, and where appropriate, under the supervision of staff.

4.1 CR materials and products are chosen according to their presentation, labelling, origin, composition and characteristics, preparing them according to the order of manufacture.

CR 4.2 skins are selected collating model, characteristics (dimensions, thickness, prestes and items or lots, defects, among others) and applications, forming lots according to technical data.

CR 4.3 fabrics or non-woven fabrics are selected by its structure and by its general characteristics, finishing operations, finishes, making collection of them, according to the production order.

CR 4.4 auxiliary materials and accessories (caps, templates, Phyllis, zippers, buckles, among others) are selected by their shapes or characteristics, relate them to the operations of the sheet.

CR 4.5 preparation and materials handling procedures are performed by complying with the applicable rules of health and safety and environmental protection.

CR 4.6 the State skins is maintained by applying the conditions of conservation.

Professional context: means of production: parts and components of tissues, tissues, skin, leather and accessories. Machines: of shoes and boots, shoe repair, sewing soles and other. Adhesives and glues, silicones and solvents. Repair materials: Phillies, tapas, templates, sheets of latex, and others. Accessories: Buckles, zippers, trims, cords. Cleaning and care products: creams, grease, dyes, sprays, and others. Prices list. Containers.

Products and results: basic customer service. Resolution of complaints and grievances. Reception and storage of goods. Textile, leather and auxiliary accessories for repair of footwear and leather goods.

Information used or generated: physical samples, datasheets, supports Visual, graphic and computer systems. Schemes of processes. Purchase orders. Customer's demand. Conservation tag. Label of origin or provenance. Classification instructions. Delivery notes. Chips with tests. Repair orders. Delivery of receipt of the item. Client, source and date of collection identification tag.

Unit 2 competition: Carry out the repair in articles of leather goods level: 1 code: UC0439_1 realizations professionals and completion criteria: RP 1: organize job making stockpiles according to the order of repair of leather items in order to achieve the required quality, in the established time.

1.1 CR article (bag, wallet, bag, belt and others), raw materials, techniques and procedures are identified, analyzing the repair order.

CR 1.2 identified materials supply in sufficient quantity and quality required according to article of leather goods to repair the conditions agreed upon with the client.

CR 1.3 measures or templates contained in the order of repair parts are checked by comparing them with the dimensions of the parts from the dismantled or through direct measures of the article.

2 RP: Operations, settings and first level of machines and tools for the repair of items of leather goods, and where appropriate, under the supervision of staff.

2.1 CR machines and tools are prepared according to the order of repair leather items and types of materials used.


CR 2.2 elements operators (cut, assembled and finished) machines and tools for the repair of leather goods conform, be regulated pursuant to the material.

CR 2.3 conditions of operation of machines and tools for the repair of leather goods are modified by resetting on the basis of the results of the test operations.

CR 2.4 first level maintenance is carried out according to the technical documentation, detecting failures of productive elements of machines and replacing the damaged or worn to restore the conditions of functioning, within the assigned responsibility.

3 RP: Make the removed item of leather goods identifying parts for use as a template, and if necessary, under the supervision of staff.

3.1 CR procedure of unassembled article is carried out according to the preset sequence (stitching, detached, extraction of zipper parts, rivets, among others) according to the procedures for its use as a template.

CR 3.2 of extracted materials (exterior, filling or lining) parts are marked by identifying with the corresponding name and pointing the direction in which they were placed in the article of leather goods.

CR 3.3 templates or patterns of parts of articles of leather goods are made from reproduction on paper or carton of removed items or the measures taken, indicating the corresponding signs.

CR 3.4 the unmounted articles of leather goods is complying with the applicable rules of health and safety and environmental protection.

4 RP: Mark parts and accessories for articles of leather goods repair taking into account the characteristics of the materials, for its later cut, and where appropriate, under the supervision of the personnel responsible for.

4.1 CR materials (tissue or outer skin, lining, filling, backing, among others) are prepared to take account of their conditions (texture, color, drawing, defects, among others) and number of pieces.

CR 4.2 the extended skin and leather articles of leather goods repair is performed by checking the pay, without tension and without folds, facilitating the marking and cutting.

CR 4.3 tissue repair leather items extends on the table according to the procedure (monolayer or multilayer, no pleats, lined, with stress, sense of thread and address, among others).

CR 4.4 extended stuffed in the repair of leather items (wadding, linings foam and others) is fastened on the table preventing their mobility, facilitating their marking and cutting back.

CR 4.5 parts in the repair of leather items are marked from the shape or dimension of the pattern or template, pointing out pickets and drilling, according to technical specifications.

CR 4.6 cutting articles of leather goods repair is performed by procedures and techniques established by adjusting it to the shape and size designated, without deformation of the profiles of the pieces, marking pegs and holes.

CR 4.7 cut components are identified, grouped according to the order of service, checking parts to match the established criteria, separating the defective ones and replacing them by right.

CR 4.8 the documentation generated in the marking and cutting items of leather goods is carried out according to established procedures.

CR 4.9 marking and cutting patterns of articles of leather goods is complying with the applicable rules of health and safety and environmental protection.

5 RP: Assembled by sewing or other technique of union, parts and accessories for the repair of the article of leather goods according to the order of service, and if necessary, under the supervision of staff.

CR 5.1 preparation for the Assembly of parts is performed according to the technical information of the repair order.

CR 5.2 quality of parts or materials prepared for the repair of the article of leather goods is checked according to the shape and appearance, and location of ornaments or jewelry findings, according to the order of service, correcting any anomalies.

5.3 CR auxiliary and ornamental elements (zipper, buckles, rubber, among others) are incorporated into the article, as design, according to the order of repair.

CR 5.4 parts joined by hand or machine, taking into account the characteristics of the material, the type of Assembly that must be applied, following the sequence preset according to the order of repair.

5.5 CR anomalies or defects in the repaired leather article are corrected under the responsibility of the personnel, informing the responsible person.

CR 5.6 generated documentation is carried out according to established procedures.

CR 5.7 Assembly articles of leather goods is complying with the applicable rules of health and safety and environmental protection.

6 RP: Operations finish according to the characteristics of the article of leather goods and, where appropriate, under the supervision of staff, to give the article fix the appearance of final presentation.

CR 6.1 preparation of the repaired article is carried out according to the technical information.

CR 6.2 repaired item is positioned according to structure of the material, measure and shape for finishing & cleaning prior, according to the order of repair.

6.3 CR article of leather is dyed in such a way that the ink does not form drops and that penetrate inside the wrinkles that may have the same, according to the order of repair.

CR 6.4 the finishing operations are giving their final appearance according to the article, with indications of a / Manager.

CR 6.5 anomalies or defects in the finish are corrected under the responsibility of the operator, communicating to staff responsible for.

CR 6.6 the generated documentation is carried out according to established procedures.

CR 6.7 articles of leather finishing is performed by complying with the applicable rules of health and safety and environmental protection.

Professional context: means of production: tables and cutting equipment. Labeling machine. Flat sewing machines: Straight stitch, zig-zag, double stitch, triple drag, impregnating (overlock). Sewing machines-column. Gluing and welding machines. Different ironing jobs. Equipment preparation and operative maintenance of machines. Personal protective equipment.

Products and results: articles of leather goods repaired.

Used or generated information: workshop staff work orders. Technical manuals for the machines. Manual handling of machinery and equipment. Instructions for maintenance and security. Consumption of materials. Result of products. Incidences.

Unit 3 competition: The shoe level repair done: 1 code: UC0440_1 realizations professionals and completion criteria: RP 1: organize job making stockpiles according to the order of shoe repair in order to achieve the required quality, in the established time.

1.1 CR shoes, raw materials, techniques and procedures for repair are identified, analyzing the work order.

CR 1.2 identified materials supply in sufficient quantity and quality required depending on the type of repair of footwear, allowing his execution according to the conditions agreed upon with the client.

CR 1.3 measures or templates contained in the order of repair parts are checked by comparing them with the dimensions of parts disassembly or through direct measures of the footwear.

RP 2: perform operations of adjustments and maintenance of first level of them machines and equipment for the repair of footwear and in its case, low the supervision of the personal responsible.

CR 2.1 them machines and tools are prepared according to the order of service, type of footwear and types of materials used.

CR 2.2 them elements operators of the machines (cut, assembled, Bank of finisaje, finished) and tools for the repair of the footwear is fit, regulating is with arrangement to the material.

CR 2.3 them conditions of operation of the machines and tools for the repair of the footwear is modified resetting is on the base of them results of them operations of test.

CR 2.4 first level maintenance is carried out according to the technical documentation, detecting failures of productive elements of machines and replacing the damaged or worn to restore the conditions of functioning, within the assigned responsibility.

3 RP: Make the disassembled parts used or worn footwear, identifying them for use as a template and if necessary, under the supervision of staff.

3.1 CR defective parts, peeled or worn footwear (unstitched pieces, separate shank, soles, tops, heel, among others) are extracted in the preset sequence, for replacement, according to the by the procedures.

3.2 CR parts of extracted materials (aparadas parts, soles, tops, among others) are marked identified with the name and address in which were placed in the shoe.

CR 3.3 templates or patterns of footwear parts are reproduced on paper or carton of removed items, indicating the corresponding signs and identifying patterns.


CR 3.4 the disassembled of footwear is made fulfilling the normative applicable of safety and health and protection environmental.

4 RP: Mark all parts removed from the footwear repair taking into account the characteristics of the materials, for its later cut, and where appropriate, under the supervision of the personnel responsible for.

4.1 CR materials (aparadas parts, lining, heel, soles, tops, templates, among others) are prepared to take account of their conditions (texture, color, drawing, defects, among others), and number of pieces.

CR 4.2 the extended skin and leather for shoe repair is carried out on the table by checking the address of the pay, quality, hue, hair or flakes, among others, facilitating the marking and cutting.

CR 4.3 tissue for repair of footwear ranges on the table following the process (monolayer or multilayer) without pleats, lined, with voltage, sense of direction and thread.

CR 4.4 parts for repair of footwear are marked from the shape or dimension of the pattern or template, pointing out pickets and drilling, according to technical specifications.

CR 4.5 cutting for repair of footwear is made for procedures and techniques established in the order of service by adjusting it to the shape and size designated, without deformation of the profiles of the pieces, marking pegs and holes.

CR 4.6 cut components are identified, grouped according to the order of service, checking parts to match the established criteria, separating the defective ones and replacing them by right.

CR 4.7 the documentation generated in the marking and cutting of footwear is carried out according to established procedures.

CR 4.8 marking and cutting patterns of footwear is complying with the applicable rules of health and safety and environmental protection.

5 RP: Assembled by sewing or another technique of union, parts and accessories for repair of footwear according to the order of repair and where, under the supervision of staff.

CR 5.1 parts of footwear are prepared according to the order of service, media and materials needed and correcting the anomalies detected, to the Assembly.

CR 5.2 parts are assembled by hand or machine, according to the characteristics of the material, signs, and type of Assembly (sewing, gluing and/or other) following the sequence preset in the repair order.

CR 5.3 changing independent shank or heel (case of break) occurs off the heel up to the area that allows the extraction of the same and supports the new placement, for replacement.

CR 5.4 soles and tapas or prefabricated (caps and Phyllis, and others) are replaced, hobbing mounted parts and staining worn edges, according to the order of repair.

CR 5.5 auxiliary and ornamental elements (zipper, buckles, among others) are incorporated into the article, by design, type of footwear and repair, indicated in the service order.

CR 5.6 the widened interior of footwear is made by placing them with interchangeable metal moulds, adapting it to the measure by pressure from inside, especially on the toes, instep and heel area, following the instructions of the client, to fit the required size.

CR 5.7 anomalies or defects in repaired footwear are corrected under the responsibility of the operator by contacting the person responsible.

CR 5.8 generated documentation is carried out according to established procedures.

5.9 CR marking and cutting patterns of footwear is complying with the applicable rules of health and safety and environmental protection.

6 RP: Perform the operations of finishing of the footwear according to their characteristics and where, under the supervision of staff, in conditions of safety and environmental protection.

CR 6.1 preparation of shoes repaired for his finish is carried out according to the technical information of the repair order.

CR 6.2 footwear is stained after cleaning so that the ink does not form drops and penetrate inside the wrinkles that may have the same, according to the order of repair.

CR 6.3 finishing operations are performed according to the type of shoe, positioning it on the Bank of finisaje or table's finish, according to the order of service, to give him his final appearance with security.

6.4 CR anomalies or defects in the finish of the repair are corrected under the responsibility of the personnel, informing the responsible person.

CR 6.5 generated documentation is carried out according to established procedures.

CR 6.6 of finishing of footwear operations comply with the applicable rules of health and safety and environmental protection.

Professional context: means of production: tables and cutting equipment. Labeling machine. Flat sewing machines: Straight stitch, zig-zag, double stitch, triple drag, impregnating (overlock). Sewing arm and column machines. Gluing and welding machines. Ironing jobs. Presses. Equipment preparation and operative maintenance of machines. Bank of finisaje. Carding. Gluing machine. Reduced machine. Splitting machine. Machine desvirar. Machine of widening gaps. Oven to reactivate, nail extractors, feet working, electric, and pneumatic nail guns, grinding machine, among others. Personal protective equipment.

Products and results: repaired shoes that have been placed, Phyllis, heels, envelopes, tapas, live, among others.

Used or generated information: workshop staff work orders. Technical manuals for the machines. Manual handling of machinery and equipment. Instructions for maintenance and security. Consumption of materials. Result of products. Parts of incidents.

TRAINING module 1: materials and services in repair of footwear and leather goods level: 1 code: MF0438_1 associated with UC: perform the provisioning and serve the customer for repair of footwear duration: 60 hours capabilities and evaluation criteria: C1: apply techniques of communication service customer in shoe repair shops and leather goods following the instructions of the staff.

CE1.1 describe the qualities that must possess and attitudes which should be developed according to the customer in trade relations.

CE1.2 identify the variables involved in the behavior and motivations of the / of the customer according to your requirements.

CE1.3 in a practical course at the customer perform the communicative process as part of customer service.

CE1.4 identify the documentation annexed to the operations to serve the customer, according to the procedures.

C2: Recognize the items for repair of footwear and leather goods, storing them according to the instructions of a responsible person.

CE2.1 identify materials, footwear and leather products, storing them according to possibility of repair.

CE2.2 distinguish parts repair or replacement according to the article of footwear or leather goods.

CE2.3 raise budgets of repair depending on rate.

CE2.4 describe procedures for the storage of materials according to technical data sheets.

CE2.5 interpret and fill out sheets of stock/inventory according to procedures.

CE2.6 in a practical course of distribution and storage of goods in footwear and leather goods, from the instructions received from responsible for:-label materials according to their characteristics of use.

-Identify the procedures of handling and storage according to the labeling.

-Controlling the temperature, humidity and illumination of the storage areas according to the type of material.

C3: Recognize the features of hides and skins according to the article for repair.

CE3.1 recognize the different types of fur and leather according to its origin and form of presentation.

CE3.2 identify defects in hides and skins due according to reference samples.

CE3.3 classify skins finished according to the size, thickness and defects.

CE3.4 in a practical course of recognition of skins, classify furs and leathers by their origin, characteristics and defects according to reference samples as part of the process of repair of footwear and leather goods.

C4: Recognize the materials (furs and leathers, threads, fabrics and non-woven fabrics), depending on the application in the process of repair of footwear and leather goods.

CE4.1 identify textile materials (threads, fabrics and non-woven fabrics) according to its labeling.

In a practical course of recognition of skins or tissues CE4.2, visually discriminate textile products because of their characteristics as part of the process for the repair of footwear and leather goods.

CE4.3 identify treatments for finishing of textiles according to their characteristics.

CE4.4 recognize the characteristics of the textiles products according to reference samples.

C5: Recognize auxiliary materials and accessories used in the process of repair of footwear and leather goods according to instructions of a / Manager.

CE5.1 recognize the characteristics of the materials auxiliary according to technical data.

CE5.2 differentiate accessories, tops, templates, Phyllis, zippers, buckles, among others, depending on the application.

CE5.3 relate to auxiliary materials and accessories with the sequence of operations according to the datasheet.

Skills whose acquisition must be completed in a real work environment:


C1 on CE1.3; C2 regarding CE2.6; C3 on CE3.4; C4 CE4.2 and CE4.4.

Other skills: be responsible for the work that develops.

Treat the customer with courtesy, respect and discretion.

Demonstrate interest and concern by satisfactorily meet the needs of customers. Communicate effectively with the right people at any given time, respecting the channels established in the organization.

Get used to the pace of work of the organization.

Convey information with clarity, in an orderly manner, structured, clear and precise respecting the channels established in the organization.

Contents: 1. matter textiles (yarns, fabrics, non-woven fabrics), furs and leathers classification, characteristics and properties.

Elementary identification procedures.

Defects of textiles, furs and leathers.

Finishes.

Commercial presentation.

2. auxiliary materials tops, Phyllis.

Trimmings and accouterments, prefabricated accessories or components.

Ornamental: head nails, tacks.

Flats for footwear and components.

3. attention to customer features, functions, attitudes and knowledge. Communication skills.

Relationships with those customers.

Annexed documentation to the sales operations.

Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the realization of the provisioning and customer service for repair of footwear, which will be using one of the following ways:-academic training level 1 (Spanish higher education qualifications framework) or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.

TRAINING module 2: repair of articles of leather goods level: 1 code: MF0439_1 associated with UC: repair done in articles of leather goods duration: 90 hours capabilities and evaluation criteria: C1: organize work according to the order of repair of leather items.

CE1.1 identify items, raw materials and processes used for the repair of items of leather goods according to the order of manufacture.

CE1.2 in a practical course of organization of work identify materials as part of the article of leather goods according to order the repair order.

CE1.3 in a practical course of leather item repair check measures or templates of the parts from the dismantled, according to the order of repair.

C2: Apply first level maintenance machine and tools for the repair of items of leather goods, according to instructions of a / Manager.

CE2.1 identify the machines and tools according to the order of repair of leather items.

CE2.2 interpret technical information and manual machines and relate it to the operation, set-up and maintenance of first level.

CE2.3 in a practical course of repair of leather articles, following the instructions of a / person responsible for:-preparing machines, adjusting them as part of the process.

-Apply the maintenance of first level of machine and tools according to the manual of the same.

C3: Carry out the removed item of leather goods defining their use as a template, according to instructions of a / Manager.

CE3.1 describe the procedures of disassembled articles of leather goods starting from repair sheet.

CE3.2 in a practical course of unmounted articles of leather goods following the instructions of a / Manager.

-Identify the model, parties and their order of disassembled, relating it to the sheet.

-Reproduce the templates or patterns with the signs of the marking of parts.

CE3.3 classify parts that are removed from the article of leather goods, placing them in a new location.

C4: Prepare materials using different cutting according to the order of manufacturing procedures, applying criteria of safety.

CE4.1 describe the preparation of materials for the repair of leather items.

CE4.2 in a practical course of cutting of parts for the repair of items of leather goods, according to the instructions of a / Manager:-prepare material according to its characteristics.

-Apply the extended material, detecting any anomalies or defects.

-Apply the marking, running the Court as part of the process of repairing articles of leather goods according to order of repair.

-Check the quality of the cut components, communicating the anomalies detected.

-Group cut components, packaging them.

CE4.3 classify materials cut according to the procedures of the company.

CE4.4 prepare the documentation relating to the cutting process for the repair of items of leather goods, according to order of repair.

C5: Operations of preparation and Assembly of parts for the repair of leather goods according to the order of repair items.

CE5.1 describe the systems of Assembly depending on the type of union, media and materials that are to be used according to the order of repair of leather items.

CE5.2 in a practical course of Assembly of parts and materials for the repair of leather goods, according to instructions received items:-prepare the components on the basis of materials that must be assembled, according to the court order.

-Identify the machines, tools and utensils necessary, by selecting each one of them according to the Assembly.

-Select procedures according to certain criteria of Assembly and connecting elements.

-Specify the sequence of operations of Assembly, according to quality criteria established by the company.

-Apply the union of parts and auxiliary materials as part of the production process according to the order of repair.

CE5.3 encode the documentation generated according to the procedures of the company.

C6: Perform the operations of finished articles of leather goods repaired according to the orders of a / Manager.

CE6.1 describe finishing in leather goods repair procedures (tinted, waxes, polishing, brightness and others), according to the orders of service.

CE6.2 in a practical course of color change of an article of leather goods, according to instructions received:-organise dyeing operations according to the means and materials that must be used, according to the order of repair.

-Perform the operations of cleaning and drying prior to dyeing.

-Make the tincture checking to penetrate the wrinkles that may have, avoiding the formation of drops.

-Fill in the documentation according to the procedures of the company.

CE6.3 in a practical course of finishing the repair of leather goods in leather or fabric, under the supervision of a / Manager:-organize finish repair operations, media and materials that must be used, according to the order of repair.

-Perform the operations of finish according to the techniques of each operation (pistol, brush, waxed, polished and others).

-Check the quality of the finishing of leather goods repaired correcting the anomalies detected.

-Fill in the documentation according to the procedures of the company.

Skills whose acquisition must be completed in a real work environment: C1 with regard to CE1.2 and CE1.3; C2 regarding CE2.3; C3 on CE3.2; C4 regarding CE4.2; C5 regarding CE5.2; C6 CE6.2 and CE6.3.

Other skills: be responsible for the work that develops.

Comply with the rules of production set by the organization. Complete the work within the stipulated deadlines.

Keep the work area with the degree of order and cleanliness required by the organization. Interpret and execute commands from working.

Communicate effectively with the right people at any given time, respecting the channels established in the organization.

Contents: 1. articles of leather types and features: handbags, belts, bags, wallets, purses, suitcases, boxes and others.

Technical data sheets.

Extraction of patterns of components. Set of templates or patterns.

2. materials used in the repair of articles of leather fabrics, furs, leathers, laminated, synthetic, polymers. Fabric: coating.

Filling: foam, cuerson, papier-mâché and others. Supports: prefabricated accessories or components. Threads: thickness, resistance and quality.

Adhesives and glues, silicones and solvents: characteristics, conservation and safety. Auxiliary accessories used in leather goods, jewelry and ornaments.

Dyes and waxes. Types and applications.

3. machines and maintenance machines for cutting, Assembly and finishing. Maintenance manual.

Preventive and corrective maintenance.

Maintenance manuals and technical data sheets.


4. operations applied to the repair of items of leather cutting techniques: manual and conventional, pressure and automatic. The cutting parameters. Machines and tools.

Sequence of conventional cutting operations: shred and tune. Preparation and extended from skins, fabrics and other materials.

Cutting of different materials.

Assembly by different techniques: sewing, gluing, and others. Finishing loose components.

Final finishing of the article.

Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the realization of repair in articles of leather goods, which will be using one of the following ways:-academic training level 1 (Spanish higher education qualifications framework) or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.

TRAINING module 3: repair of footwear level: 1 code: MF0440_1 associated with UC: duration footwear repair done: 120 hours capabilities and evaluation criteria: C1: organize work according to the order of shoe repair.

CE1.1 identify items, raw materials and processes used in the repair of footwear according to the order of repair.

CE1.2 in a practical course of organization of the shoe repair job, identify the materials as part of the footwear in order the order of repair.

CE1.3 in a practical course of shoe repair, verify the measures or templates of the parts from the dismantled, according to the order of repair.

C2: Apply first level maintenance on the machine and tools in the repair of footwear, according to instructions of a / Manager.

CE2.1 identify the machines and tools according to the order of shoe repair.

CE2.2 interpret technical and manual information from machines on the operation, set-up and maintenance of first level.

CE2.3 in a practical course of preparation of cutting machines, Assembly or mounted shoe repair, following the instructions of a / person responsible for:-preparing machines, adjusting them as part of the process.

-Apply the maintenance of first level of machine and tools according to the manual of the same.

C3: Perform the unassembled footwear defining its use as a template, according to instructions of a / Manager.

CE3.1 describe the procedures of unassembled footwear starting from the order of repair.

CE3.2 describe procedures of pattern design of footwear to obtain templates from the disassembled parts.

CE3.3 in a practical course of disassembled footwear according to the instructions of a / Manager:-identify the model, parties and their order of disassembled, relating it to the sheet.

-Reproduce the templates or patterns with the signs of the marking of parts.

-Classify pieces that are removed item of leather goods for new placement.

C4: Prepare materials using different cutting according to the order of manufacturing procedures, applying criteria of safety.

CE4.1 describe the preparation of different materials for shoe repair.

CE4.2 in a practical course of cutting pieces to repair footwear, according to the instructions of a / Manager:-prepare material according to its characteristics.

-Select the extended according to the type of material detecting possible anomalies or defects.

-Mark parts as part of the process of repair of footwear according to order of repair.

-Select the type of court according to him material to be cut.

-Check the quality of the cut components, communicating the anomalies detected.

-Group cut components, packaging them.

CE4.3 prepare the documentation relating to the cutting process for the repair of items of leather goods, according to order of repair.

C5: Conduct operations of preparation and Assembly, for repair of footwear according to the order of repair.

CE5.1 describe the systems of Assembly depending on the type of union, media and materials will be used, depending on the repair order.

CE5.2 describe the operations of replacement of components such as Shanks, heels, soles, tops (Phillies) or prefabricated among others to replace the faulty according to the order of repair.

CE5.3 in a practical course of substitution of components for repair of footwear, according to instructions received:-prepare the components on the basis of materials that must be repaired, according to the order of repair.

-Identify the machines, tools and utensils necessary, by selecting each one of them according to the service.

-Select procedures on the basis of certain criteria of Assembly and union.

-Specify the sequence of repairs, according to quality criteria established by the company.

-Apply the union of parts and auxiliary materials as part of the production process according to the order of repair.

CE5.4 encode the documentation generated according to the procedures of the company.

C6: Perform finishing operations in the shoe repair according to the orders of a / Manager.

CE6.1 describe finishing procedures in the repair of footwear (tinted, waxes, polishing, glitter and others), media and materials that should be used and determine the sequences of operations, according to the orders of service.

CE6.2 in a practical course of color change of footwear in skin, according to instructions received:-organise dyeing operations according to the means and materials that must be used, according to the order of repair.

-Perform the operations of cleaning and drying prior to dyeing.

-. Make the tincture checking to penetrate the wrinkles that may have preventing the formation of drops.

-Fill in the documentation according to the procedures of the company.

CE6.3 in a practical course of finishing the repair of footwear according to instructions received:-organizing the finishing operations on repair according to the means and materials that must be used according to the service order.

-Perform the operations on the Bank of finisaje with safety criteria.

-Operations finish, depending on the type of operation (pistol, brush, waxed, polished and others).

-Check the quality of the finish of the repaired footwear, checking among others the appearance, strength, as well as global aspects such as neatness and uniformity of color, correcting the anomalies detected, under the supervision of a / Manager.

-Fill in the documentation according to the procedures of the company.

Skills whose acquisition must be completed in a real work environment: C1 with regard to CE1.2 and CE1.3; C2 regarding CE2.3; C3 on CE3.3; C4 regarding CE4.2; C5 regarding CE5.3; C6 CE6.2 and CE6.3.

Other skills: be responsible for the work that develops.

Comply with the rules of production set by the organization.

Complete the work within the stipulated deadlines.

Keep the work area with the degree of order and cleanliness required by the organization.

Interpret and execute commands from working.

Communicate effectively with the right people at any given time, respecting the channels established in the organization.

Contents: 1. footwear types of footwear: Knight, Lady, child, baby, special and security. Repair and finishing of footwear. Operations and procedures. Technical data sheets. Footwear pattern. Extraction of patterns of components. Set of templates or patterns.

2. materials and products used in the repair and maintenance of footwear types of materials: skins, leathers, fabrics, laminates, synthetic, polymers. Fabric: coating.

Supports: prefabricated accessories or components.

Auxiliary accessories used in footwear, jewelry findings and ornaments. Threads: thickness, resistance and quality.

Adhesives and glues, silicones and solvents.

Repair materials: plates, tapas, Phyllis, templates. Characteristics, conservation and safety. Agents (dyes, waxes, pigments and others). Cleaning and care products: creams, grease, dyes.

3. machinery, tools and operations applied in repair of footwear machines cutting, Assembly and finishing.

Cutting techniques: manual and conventional, pressure and automatic. The cutting parameters. Machines and tools.

Conventional cutting: features and applications.

Sequence of conventional cutting operations: shred and tune. Preparation and extended skins, fabrics and other materials.

Cutting of different materials.

Assembly by different techniques: sewing, gluing, and others. Assembled by hand or machine: features and applications Assembly parameters. Machines and tools.

Finishing loose components. Final finishing of the article.

4. finishing of footwear


Finishing loose components. Final finishing of the article.

Machine cut and split.

Machine lasts for expansion. Applications.

Bank of finisaje, carding machines, gluing machine. Machines auxiliaries of give adhesive, systems of aspiration.

Parameters of the training context: spaces and facilities: the spaces and facilities will answer, in the form of classroom, classroom workshop, workshop practice, laboratory, or space, to training needs, in accordance with the professional context established in the competition unit associated, taking into account the applicable regulations of the productive sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of the trainer or trainer: 1. domain of knowledge and techniques related to the completion of the repair of footwear, which will be using one of the following ways:-academic training level 1 (Spanish higher education qualifications framework) or other upper level related to the professional field.

-Professional experience of minimum 3 years in the field of skills related to this training module.

2. accredited educational competition in accordance with it to establish the competent administrations.