The Organic Law of 19 June, of Qualifications and Vocational Training, aims at the organisation of an integral system of vocational training, qualifications and accreditation, which will respond effectively and transparency of social and economic demands through the various forms of training. To this end, it creates the National System of Qualifications and Vocational Training, defining it in Article 2.1 as the set of instruments and actions necessary to promote and develop the integration of vocational training offerings, through the National Catalogue of Professional Qualifications, as well as the evaluation and accreditation of the corresponding professional skills, in order to promote the professional and social development of the people and cover the needs of the production system.

The National Catalogue of Professional Qualifications, as set out in Article 7.1, is designed to facilitate the integrated nature and adequacy of vocational training and the labour market, as well as training throughout life, the mobility of workers and the unity of the labour market. This catalogue consists of the qualifications identified in the production system and the training associated with them, which is organised in training modules.

Article 5.3 of the Organic Law of 19 June, gives the National Qualifications Institute the responsibility to define, develop and maintain the National Catalogue of Professional Qualifications, in its quality of technical organ of support to the General Council of Vocational Training, whose regulatory development is set out in Article 9.2 of Royal Decree 1128/2003 of 5 September, which regulates the National Catalogue of Qualifications Professionals, in accordance with Article 9.4, the obligation to maintain permanently updated by its periodic review which, in any case, shall be carried out within a period of not more than five years from the date of inclusion of the qualification in the catalogue.

Therefore, this order is issued in application of Royal Decree 817/2014 of 26 September 2014 laying down specific aspects of professional qualifications for the purposes of which it is amended, Article 7.3 of the Organic Law of 19 June

Thus, in this order, two professional qualifications of the Professional Family of Textile, Clothing and Piel, which have an age in the National Catalogue of Professional qualifications exceeding five years, to which Royal Decree 817/2014 applies, of 26 September.

In the process of drafting this order, the Autonomous Communities have been consulted and the General Council of Vocational Training and the State School Council have issued a report.

Under the joint proposal of the Minister for Education, Culture and Sport and the Minister for Employment and Social Security, I have:

Article 1. Object and scope of application.

This ministerial order is intended to update, with the replacement of the corresponding annexes, two professional qualifications for the textile, clothing and clothing professional family, including in the National Catalogue of Professional Qualifications, in application of Royal Decree 817/2014 of 26 September, laying down specific aspects of professional qualifications for the purposes of which they are amended, approved and approved Article 7.3 of the Organic Law of 19 June 2002 on the application of Article 7.3 of the qualifications and vocational training.

Updated professional qualifications are valid and are applicable throughout the national territory and do not constitute a regulation of professional practice.

Article 2. Updating of certain professional qualifications of the Professional Family Textile, Clothing and Skin, established by Royal Decree 1087/2005 of 16 September, establishing new qualifications (a) vocational training, which is included in the National Catalogue of Vocational Qualifications, as well as their corresponding training modules, which are incorporated into the Modular Vocational Training Catalogue, and certain qualifications are updated professionals of those established by Royal Decree 295/2004, of 20 February.

As set out in the single additional provision of Royal Decree 1087/2005 of 16 September 2005, the updating of professional qualifications, the specifications of which are contained in the Annexes, is based on CXXXVI and CXXXIX of the aforementioned royal decree:

One. A new wording is given to Annex CXXXVI, Professional Qualification Auxiliary operations of upholstery of furniture and mural. Level 1. TCP136_1, which is listed as Annex I to this order.

Two. A new wording is given to Annex CXXXIX, Professional Qualification Repair of footwear and leather goods. Level 1. TCP139_1, which is listed as Annex II to this order.

Final disposition first. Competence title.

This order is dictated by the powers conferred on the State by Article 149.1.1st and 30th of the Constitution, on the regulation of the basic conditions that guarantee the equality of all Spaniards in the exercise of rights and in the fulfilment of constitutional duties, and for the regulation of the conditions for obtaining, issuing and approval of academic and professional qualifications.

Final disposition second. Entry into force.

This order shall enter into force on the day following that of its publication in the "Official State Gazette".

Madrid, October 1, 2015. -Government Vice President and Minister of the Presidency Soraya Saenz de Santamaria Anton.

ANNEX I

PROFESSIONAL QUALIFICATION: AUXILIARY OPERATIONS FOR UPHOLSTERY OF FURNITURE AND MURAL

Professional Family: Textile, Clothing and Skin

Level: 1

Code: TCP136_1

General Competition

Discount, prepare, assemble and mount upholstered furniture and mural, applying techniques and procedures in each process, achieving the articles with quality in the intended time, in conditions of safety and respect environmental.

Competition Units

UC0428_1: Atender to the client and perform provisioning for upholstered processes

UC0429_1: Perform ungarnishing, preparing, and mounting the upholstered on furniture

UC0430_1: Perform framing, garnish and wall entelting, and upholstered wall panels

Professional Environment

Professional Scope

Develops its professional activity in the area of production of clothing dedicated to auxiliary operations of upholstery of furniture and mural in entities of public or private nature, in medium or small business, both for account as an outsider, irrespective of its legal form. It develops its activity depending on its case, functional and/or hierarchically of a superior. The principles of universal accessibility are applied in the development of professional activity in accordance with the applicable regulations.

Productive Sectors

It is located in the production sector of textile, clothing and leather, in the subsector related to the upholstery of furniture and mural.

Relevant Occupations and Jobs

The terms of the following relationship of occupations and jobs are used with a generic and omnicomprensivo character of women and men.

Furniture Taps

Artisan taps, in general

Vehicle Taps

Enters

Associated Training (330 hours)

Training Modules

MF0428_1: Materials and services in upholstery (60 hours)

MF0429_1: Furniture Taping (180 hours)

MF0430_1: Wall-walled and upholstered wall panels (90 hours)

COMPETITION UNIT 1: SERVICING THE CUSTOMER AND PERFORMING PROVISIONING FOR UPHOLSTERED PROCESSES

Level: 1

Code: UC0428_1

Professional realizations and realization criteria:

RP 1: Understand the customer in the upholstery setting to determine the service according to the instructions of the responsible personnel.

CR 1.1 Customer needs are met according to the customer's characteristics, depending on the service request.

CR 1.2 Client requirements are identified, using question and active listening techniques, to determine the service that you may need.

CR 1.3 Complaints and complaints from clients that exceed their liability are transmitted to the immediate responsible staff, following the established procedure.

RP 2: Perform the reception and storage of furniture to repair, in accordance with pre-fixed criteria and instructions and, where appropriate, under the supervision of responsible personnel.

CR 2.1 The reception of the furniture is done by completing the record sheet with the customer's data, type of furniture and the possibility of repair.

CR 2.2 The damages of the upholstery in the furniture are detected, indicating the failures of the materials caused by improper manufacture or wear by the use.

CR 2.3 Repair operations are determined by observing the deterioration produced in the furniture.

CR 2.4 The repair budget is made on a fee basis taking into account its technical, aesthetic and quality characteristics.

CR 2.5 The accepted furniture and/or materials, with their repair order, are stored in the containers or areas arranged for the purpose.

CR 2.6 The established procedures and material handling are carried out in accordance with the applicable regulations on prevention of occupational risks and environmental protection.

RP 3: Perform the reception, distribution and storage of the goods for later use, according to quality criteria and pre-fixed instructions and, where appropriate, under the supervision of the responsible personnel.

CR 3.1 The materials received are labeled identifying them for immediate control.

CR 3.2 The established procedures and material handling are done in order, following the instructions received.

CR 3.3 The identified materials are stored in the containers or areas arranged for effect according to the labeling for later use.

CR 3.4 Temperature, humidity, warehouse lighting fit, keeping materials in perfect condition.

RP 4: Use the materials (yarns, fabrics, non-woven fabrics, hides, accessories, auxiliary products, among others), according to their characteristics, for their application in the process of upholstering, where appropriate, under the supervision of the responsible staff.

CR 4.1 Materials and products are prepared according to the manufacturing order for the upholstery process, taking into account the indications of the responsible personnel.

CR 4.2 The skins are displayed by matching model, characteristics (dimensions, thickness, prestes and batches, defects among others) and applications, forming lots for repair of upholstered articles, according to the technical and instructions for responsible personnel.

CR 4.3 Auxiliary materials and supplements (foams, animal or plant foams, guata, among others) are prepared according to their forms and/or characteristics, relating to the operations of the technical fiche, for the sequencing of the same, under the supervision of the responsible personnel.

CR 4.4 Material preparation and movement procedures are performed in compliance with applicable safety and health and environmental protection regulations.

Professional context:

Production media:

Tissues, not tissues, skin, leather, and supplements (foams, animal or vegetable crns, guata, among others). Springs or springs (helical spirals, arches and planes). Supports (jute and rubber cinches). Fornitures and stokes, accessories and/or prefabricated components, gallons, tassels, nails, tacks and tacks in mould. Threads, mistresses and ropes. Glues and glues, silicones and solvents. Price tariffs. Containers.

Products and results:

Basic customer care. Resolution of complaints and complaints. Reception and storage of goods. Textile materials, leather and auxiliary accessories for furniture and wall upholstery.

Information used or generated:

Physical samples, technical tabs, visual media, graphics, computer systems. Schema of the processes. Purchase orders. Customer demand. Conservation label. Label of origin or provenance. Classification instructions. Albaranes. Chips with tests. Repair orders. Receipt of the article. Customer identification tag, provenance, and date of collection.

COMPETITION UNIT 2: PERFORM THE REMOVAL, PREPARATION, AND MOUNTING OF THE UPHOLSTERED FURNITURE

Level: 1

Code: UC0429_1

Professional realizations and realization criteria:

RP 1: Organize the job position, making use of the upholstered order, in order to achieve the required quality, in the established time.

CR 1.1 The article, raw materials, techniques and procedures to be followed in the upholstery process are identified by analyzing the upholstered order.

CR 1.2 The identified materials are supplied in sufficient quantity and with the required quality, depending on the article to be upholstered, according to the conditions agreed with the customer.

CR 1.3 The measures or templates of the pieces contained in the upholstered order are checked against the dimensions of the parts from the unmounted of the article.

RP 2: Perform first-level operations, adjustments, and maintenance of machines and tools for furniture upholstery, according to established procedures, and where appropriate, under the supervision of responsible personnel.

CR 2.1 The tools and machines are prepared on the basis of the requirements of the upholstered order and types of materials used.

CR 2.2 The operator elements of the machines (cut, assembled and assembled, among others) and tools are adjusted, regulating them according to the material.

CR 2.3 The operating conditions of the machines and tools are modified by readjusting based on the results of the test operations.

CR 2.4 The first level maintenance is performed according to the technical documentation, detecting the failures of the productive elements of the machines and replacing the damaged or worn out to restore the conditions of the operation.

RP 3: Undress or undress the covers and fill of upholstered structures, identifying the parts and the order of extraction for use as a template and, where appropriate, under the supervision of the staff responsible.

CR 3.1 The extraction procedure is performed by following the preset sequence (outer and inner cover, padding and suspension or support, among others), according to the procedures, applying safety criteria.

CR 3.2 Parts of extracted (upholstered and/or filled) materials are marked and identified with the corresponding name, pointing to the direction in which they were placed.

CR 3.3 The list of component parts is made in the order in which they are removed, as a reference for the reverse mounted.

CR 3.4 The position and direction of folds, as well as the specific details to be taken into account are marked in the removed parts, signaling it in the template or pattern.

CR 3.5 The templates or patterns are made from the reproduction on paper or cardboard of the removed parts, indicating the corresponding signs.

RP 4: Mark the parts and accessories, taking into account the characteristics of the materials, for later cutting, and where appropriate, under the supervision of the responsible personnel.

CR 4.1 Materials (fabric or outer skin, inner fabric, padding, supports, lining, among others) are prepared taking into account their conditioning (texture, color, drawing, defects, among others).

CR 4.2 The fabric extends over the table according to the procedure (unicapa or multilayer, no folds, aligned, with tension, sense of thread and direction, among others).

CR 4.3 The skin positioning is performed by checking the loan, without tension and without folds, facilitating the marking and cutting.

CR 4.4 The spread of fillers (guata, muleton, foam and others) is held on the table, preventing mobility, facilitating the marking and subsequent cutting.

CR 4.5 The parts are marked from the shape and/or dimension of the pattern or template, pointing to picketing and perforations, according to specifications.

CR 4.6 The cut is performed by established procedures and techniques, complying with applicable safety regulations, precisely adjusting the shape and size indicated, without deformation of the parts profiles, marking piquettes and perforations.

CR 4.7 The cut components are identified by grouping according to the assembly order for the upholstery.

CR 4.8 The generated documentation is completed according to the established procedures.

RP 5: Assemble, by stitching or other bonding techniques, the prepared parts of materials and accessories to obtain the upholstered with the intended quality in the production order according to the instructions received.

CR 5.1 The preparation for the assembly is done according to the technical information of the production order.

CR 5.2 The quality of the prepared parts and/or materials is checked, taking into account the shape, appearance and placement of trimmings and/or fornitures according to the production order, correcting the possible anomalies.

CR 5.3 The attachment is made taking into account the characteristics of the material, the type of assembly to be applied, following the pre-set sequence and complying with the applicable safety and health regulations.

CR 5.4 Auxiliary and ornamental elements (tassels, buttons, gallons, and others) are incorporated according to design.

CR 5.5 Add-ons (box cushions, cushions, among others) and/or items are reviewed in accordance with the quality criteria set out in the production sheet.

CR 5.6 Failure or minor defects are corrected under the responsibility of the operator, and communicating to the person responsible.

CR 5.7 The generated documentation is completed according to established procedures.

RP 6: Perform the operations of the upholstered assembly according to the characteristics of each piece of furniture and, where appropriate, under the supervision of the responsible personnel.

CR 6.1 The solidity of the structure or frame of the furniture is checked to support the mounting process of the upholstery according to the production technical tab.

CR 6.2 The structure or frame of the piece of furniture is prepared for the assembly, according to the production sheet.

CR 6.3 The suspension elements are positioned according to the structure (cinches, springs, wavy strips, and others), attaching the frame to the frame in such a way that it is strained, complying with the applicable safety and health regulations.

CR 6.4 The filling material (foams, animal or plant breeding, guata, and others) is distributed by adjusting it to the structure and shape of the model, applying established procedures and techniques.

CR 6.5 The interweaving of the components (seats, fronts, arms) is attached to the frame by means of the indicated elements (adhesives, staples, nails, screws, chinchettes and others), modeling to achieve symmetry and volume according to the established procedures and techniques.

CR 6.6 The outer cover of the upholstered and lined (lower and rear) is made by fixing the parts corresponding to each zone, applying established procedures and techniques, adjusting it to the structure and shape of the model.

CR 6.7 The decorative elements (tassels, buttons, gallons, and others) are applied in the places indicated by model.

CR 6.8 The generated documentation is completed according to the established procedures.

Professional context:

Production media:

Cutting tables and equipment, cutting machines. Die machine. Labeling machine. Flat sewing machines: weighing straight, zig-zag, triple trawl. Overlock machine. Column sewing machine. Machine for forging buttons. Machine for placing brooches. Gluing and welding machines. Stapling machine. Different ironing posts. Equipment for the preparation and operational maintenance of machines. Personal protective equipment.

Products and results:

Upholstered Furniture Items.

Information used or generated:

Work orders of the workshop staff. Technical manuals of the machines. Machine and equipment handling manuals. Maintenance and security manual. Applicable rules on prevention of occupational risks and environmental protection. Consumption of materials. Product result. Incidents.

COMPETITION UNIT 3: PERFORM FRAMING, GUARNITY AND WALL ENTELLING, AND WALL-PANEL UPHOLSTERY

Level: 1

Code: UC0430_1

Professional realizations and realization criteria:

RP 1: Organize the work for the walls, ceilings, or upholstery of wall panels, interpreting the production order.

CR 1.1 The upholstered order is interpreted by identifying the item, raw materials, techniques, and procedures of the wall, ceiling, or upholstered process of wall panels.

CR 1.2 The identified materials are supplied in sufficient quantity and with the required quality, depending on the article to be upholstered, according to the conditions agreed with the customer.

CR 1.3 The measures or templates of the pieces contained in the order of the entelting are checked against the dimensions of the pieces of the unmounted of the article.

RP 2: Prepare the machines and tools to adjust them to a first level of maintenance according to the production order and, where appropriate, under the supervision of the responsible personnel.

CR 2.1 The preparation of the machines and tools is performed according to the order of upholstery.

CR 2.2 The operator elements of the machines (cut, assembled, finished) are adjusted according to the materials according to the production order.

CR 2.3 The parameters of the machines (cut, assembled, finished) are readjusted according to the results of the test operations.

CR 2.4 The first level maintenance is performed according to the technical documentation, detecting the failures of the productive elements of the machines and replacing the damaged or worn out, within the responsibility assigned and complying with the applicable safety and health regulations.

RP 3: Mark the cloths or panels for the entelting, from the characteristics of the materials, by cutting and assembling them according to the production order and, where appropriate, under the supervision of the responsible personnel.

CR 3.1 The material (unstitched or stitched fabric, mulleton or guata, and others) is prepared according to its characteristics (texture, color, drawing, defects, and others), number of pieces, among others for its later extended in the cutting table according to the procedure.

CR 3.2 The parts are positioned according to the shape and/or dimension of the panels or panels, controlling the situation of reasons, facilitating the cutting operation, complying with the applicable safety and health regulations.

CR 3.3 The cut components are identified by grouping them according to the order of assembly, checking that the pieces match the set criteria, separating the defective ones and replacing them.

CR 3.4 The components are assembled according to the characteristics of the material, the type of seam or other joints.

CR 3.5 Failure or defects are corrected under the responsibility of the operator, communicating to the responsible personnel.

CR 3.6 The generated documentation is completed according to procedures.

RP 4: Prepare frame and mulleton or guata for each panel, placing them for wall and ceiling entelting, and, where appropriate, under the supervision of responsible personnel.

CR 4.1 The state of the surfaces to be found is checked, avoiding the existence of highlights that damage the tissue or the appearance of the entelting, according to the production technical tab.

CR 4.2 The cardboard strips or rastrels (soft wood slats) are prepared for placement in a frame frame according to the technical tab and the procedures.

CR 4.3 The gaps in the walls (doors, windows, switches) are lined with slats facilitating the subsequent attachment of the entelation.

CR 4.4 The mulleton is placed inside the frame-frame, setting it according to the procedures by avoiding ripples when the tissue is tense.

CR 4.5 The elentate of panels or panels prepared for each wall, with or without muletches, is made directly onto the frame, according to the technical tab, complying with the applicable safety and health regulations.

CR 4.6 The finish to hide the staples is done in cornices with molding, gallon or tapestry tape and at the bottom with rhodae preventing tissue deterioration.

CR 4.7 Failure or minor defects are corrected under the responsibility of the operator, communicating them to the responsible personnel.

CR 4.8 The generated documentation is completed according to procedures.

RP 5: Perform upholstered operations on wall panels to obtain headboards, biombos, rigid galleries, or lambrequins, taking into account the characteristics of the materials, and, where appropriate, under the supervision of the staff responsible.

CR 5.1 The materials (fabric, foam, mulleton among others) are prepared according to model or form of the conglomerate or plywood plate and according to the procedure and the technical tab.

CR 5.2 The foam or mulleton rubber is placed in the order indicated in the production order and fixed on the plate by contact tail or staples, depending on the article, complying with the applicable safety and health regulations.

CR 5.3 The tissue is disposed on the foam or muleton, centering the motifs or drawings, fixing with staples according to the article, modeling, obtaining the symmetry and volume, by the procedures and techniques established according to the production order.

CR 5.4 The article is tense and staple at the back, foraging it according to the procedures and the technical tab.

CR 5.5 The front end is performed according to the article, hiding the staples and pasting the accessories, (edging, cord or handrail tape and others).

CR 5.6 Failure or small finishing defects are corrected under the responsibility of the operator, communicating it to the person responsible.

CR 5.7 The generated documentation is completed according to procedures.

Professional context:

Production media:

Cutting tables and equipment, cutting machines. Die machine. Labeling machine. Flat sewing machines: weighing straight, zig-zag, triple trawl. Machine overlock. Column sewing machine. Gluing and welding machines. Stapling machine. Ironing posts. Equipment for the preparation and operational maintenance of machines. Personal protective equipment.

Products and results:

Walls and ceilings. Headlining, biobbs, rigid galleries or lambs.

Information used or generated:

Internal rules of work. Procedures, manufacturing orders, technical sheets. Technical manuals of the machines. Machine and equipment handling manuals. Regulations on prevention of occupational risks and environmental protection. Consumption of materials. Product result. Incidents.

TRAINING MODULE 1: MATERIALS AND SERVICES IN UPHOLSTERY

Level: 1

Code: MF0428_1

Associate to UC: Power to the customer and perform provisioning for upholstered processes

Duration: 60 hours

Assessment Capabilities and Criteria:

C1: Apply communication techniques to customer care in upholstery establishments following the instructions of the responsible personnel.

CE1.1 Describe the qualities that you must possess and the attitudes that you must develop by taking care of the client in business relationships.

CE1.2 Identify the variables involved in the client's behavior and motivations according to the client's requirements.

CE1.3 In a convenient customer service scenario, you can perform the communicative process as part of the customer service.

CE1.4 Identify the accompanying documentation for customer service operations according to procedures.

C2: Receiving and storing the items for the upholstered following the instructions of a responsible person.

CE2.1 Identify reception and storage techniques according to materials and products for upholstery.

CE2.2 Distinguished the defects of the upholstered according to the type of furniture.

CE2.3 Plantate repair budgets based on rate.

CE2.4 Describe procedures for storing materials according to technical data sheets.

CE2.5 Interpret and fill out inventory/inventory tabs according to procedures.

CE2.6 In a practical case of distribution and storage of goods, on the basis of the instructions received from the responsible staff:

-Label the materials according to their usage characteristics.

-Identify handling and storage procedures as per the labeling.

-Control the temperature, humidity and lighting of storage areas by adapting to the type of materials.

C3: Recognize textile products (yarns, fabrics, and nonwoven fabrics), according to their application in the upholstery process.

CE3.1 Identify textile products (yarns, fabrics, and non-woven fabrics) according to their labeling.

CE3.2 In a practical case of the recognition of textile products, the textile products are visually discriminated against and for their characteristics as part of the process of selecting materials for the upholstery.

CE3.3 Identify textile ennoblement treatments according to their characteristics.

CE3.4 Recognize the characteristics of textile products according to reference samples.

C4: Recognize the characteristics of skins and hides according to the article to be manufactured.

CE4.1 Recognize the different types of skins and hides according to their origin and form of presentation.

CE4.2 Identify skin and hides defects based on reference samples.

CE4.3 In a scenario of skin recognition, classification of hides and skins by their origin, characteristics and defects according to reference samples as part of the upholstery process.

C5: Recognize auxiliary materials and add-ons used in the upholstery process as instructed by a responsible person.

CE5.1 Recognize the characteristics of auxiliary materials according to the technical tab.

CE5.2 Differentiate supplements, foams, animal or vegetable crin, guata, among others, according to your application.

CE5.3 Relate the auxiliary materials and add-ons to the sequence of operations according to the technical tab.

Capabilities whose acquisition must be completed in a real work environment:

C1 with respect to CE1.3; C2 with respect to CE2.6; C3 with respect to CE3.2; C4 with respect to CE4.3.

Other capabilities:

Take responsibility for the work you are developing.

Treat the customer with courtesy, respect and discretion.

Demonstrate interest and concern for meeting customer needs successfully.

Communicate effectively with the right people at every moment, respecting the channels established in the organization.

Habit to the organization's work rate.

Transfer information clearly, in an orderly, structured, clear and precise manner respecting the channels established in the organization.

Contents:

1. Textile materials (yarns, fabrics, non-woven fabrics), skins and hides and skins

Classification, features, and properties.

Elementary identification procedures.

Defects of textile materials, skins and hides.

Finishes.

Commercial presentation.

2. Auxiliary materials

Padding: guata, mulleton, plant crin, pens, cotton, polyester foam, and others.

Springs or springs: helical spirals, arches and planes.

Fornitures and stokes, accessories and/or prefabricated components.

Ornamental: gallons, tassels, nails with heads, tacks and tacks in mould.

Threads, Brlovers, and Strings.

3. Customer support

Features, functions, attitudes, and knowledge.

Communication skills.

Relationships with clients.

Documentation attached to sales operations.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of trainer or trainer:

1.-Domain of knowledge and techniques related to customer care and provisioning for upholstered processes, which will be accredited by one of the following two ways:

-Level 1 academic training (Spanish Framework of Qualifications for Higher Education) or other higher level education related to the professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2.-Accredited pedagogical competence according to what the competent administrations establish.

TRAINING MODULE 2: FURNITURE UPHOLSTERY

Level: 1

Code: MF0429_1

Associate to UC: Perform the Unsaved, Preparation, and Mounted of the upholstered in Furniture

Duration: 180 hours

Assessment Capabilities and Criteria:

C1: Organize the job position, according to the upholstered order.

CE1.1 Identify items, raw materials, and processes used in the upholstered according to the manufacturing order.

CE1.2 In a practical job organization scenario identify the materials as part of the item to be manufactured according to production order.

CE1.3 Verify the dimensions of parts and components according to parts from the unmounted.

C2: Apply first-level maintenance operations on machine and tools for the upholstered, as instructed by a responsible person.

CE2.1 Identify the machines and tools according to the upholstered order.

CE2.2 Interpreting machine manual and technical information and relating it to first-level operation, tuning, and maintenance.

CE2.3 In a scenario of upholstered, following the instructions of a responsible person:

-Prepare the machines, adjusting them as part of the process.

-Apply first-level maintenance of the machine and tools according to the manual of the machine and tools.

C3: Perform the unmounted or undress of a upholstered piece of furniture by specifying the order of the pieces according to the instructions of a responsible person.

CE3.1 Describe the unmounted or undress procedures of furniture upholstered from the production sheet.

CE3.2 Identify the procedure for removing the outer and inner cover, interweaving, filling, and suspension or support, according to the technical information.

CE3.3 In a practical case of dismounted a piece of furniture, following the instructions of a responsible person:

-Identify the model, parts, and their unmounted order, relating it to the technical tab.

-Play the templates or patterns by relating them to the marking of the pieces.

CE3.4 Classify the pieces that are removed from the furniture, as well as the specific details to be taken into account in the new placement and how they are reproduced on paper or cardboard, according to the manufacturing sheet.

C4: Prepare and cut materials using different procedures according to the manufacturing order, applying security criteria.

CE4.1 Describe the preparation of different materials for upholstery.

CE4.2 In a scenario-cutting scenario, according to the instructions of a responsible person:

-Prepare the material according to its characteristics.

-Apply the extended material, detecting possible defects or defects.

-Apply the marking, executing the cut as part of the upholstered process according to the technical tab.

-Check the quality of the cut components, communicating the detected failures.

-Group the cut components, packaging them.

CE4.3 Classify cut materials, according to company procedures.

CE4.4 Prepare the documentation for the cutting process, according to the technical tab.

C5: Perform preparation and assembly operations of the upholstered parts and accessories according to the production order.

CE5.1 Describe assembly systems based on the type of join, media, and materials to be used, according to the production order.

CE5.2 In a scenario of assembling parts and materials, according to instructions received:

-Prepare the components on the basis of the materials to assemble.

-Identify the necessary machines, tools, and tools, by selecting each one based on the assembly.

-Select procedures based on certain assembly criteria and join elements.

-Concrete the sequence of assembly operations, based on quality criteria set by the company.

-Apply the joining of auxiliary parts and materials as part of the production process according to the manufacturing order.

CE5.3 Describe the add-ons (box cushions, cushions, among others) and items according to the quality criteria, under the supervision of a responsible person.

CE5.4 Code the documentation generated according to company procedures.

C6: Perform preparation and mounting operations of furniture upholstery, according to the orders of a responsible person.

CE6.1 Describe furniture upholstery mounted procedures according to manufacturing orders.

CE6.2 Identify different materials by classifying them based on furniture upholstery.

CE6.3 In a practical case of the mounting of a piece of furniture, according to instructions received:

-Identify tools and machines by selecting them based on the upholstered mount.

-Prepare the structure and components (support, padding, cover) of the furniture, identifying them.

-Apply procedures and techniques based on technical information.

-Perform the upholstered from the production tab according to the different elements (filler material, components, and others).

CE6.4 Code the documentation generated in the process mounted according to company procedures.

Capabilities whose acquisition must be completed in a real work environment:

C1 with respect to CE1.1; C2 with respect to CE2.3; C3 with respect to CE3.3; C4 with respect to CE4.2; C5 for CE5.2; C6 for CE6.3.

Other capabilities:

Take responsibility for the work you are developing.

Comply with the rules that are set.

Finish the job within the set deadlines.

Maintain the work area with the degree of order and cleanliness required by the organization.

Interpret and execute work orders.

Communicate effectively with the right people at every moment, respecting the channels established in the organization.

Contents:

1. Upholstered furniture

Classification. Features.

Types: chairs, pickles, stools, chairs with arms, armchairs, sofas and others.

Classic transferable styles: styles, shapes, and features.

Upholstered modern furnishings: styles, shapes and features.

2. Materials used in furniture upholstery

Fabrics and skins for cover.

Fabrics: coating (white), covering (burlap).

Padding: guata, mulleton, plant crin, pens, cotton, polyester foam, and others.

Springs or springs: helical spirals, arches and planes.

Media: jute and rubber cinches.

Fornitures and stokes, accessories and/or prefabricated components.

Ornamental: gallons, tassels, nails with heads, tacks and tacks in mould.

Threads, Brlovers, and Strings.

Pegaments and tails, silicones and solvents.

Features, conservation, and security in use.

3. General furniture upholstery techniques

Fill or garnish with coil springs.

Foam monoblock or similar.

Furniture, procedure, procedure.

Saved with cinches and/or flat springs.

Seat, backrest, and/or arms guard.

4. Method of manufacture

Cut orders.

Extended and positioned techniques of tissue, skin, and other materials.

Court of different materials.

Cutting system: manual and conventional, pressure and automatic.

Conventional cut: features and applications. Parameters of the cut.

Conventional cut operations sequence: shredding and tuning.

Cutting machines, tools, weights, clamping pins, piquetter, driller.

Preparing cut components.

Assembly and finish of loose components.

5. Machines, tools and accessories

Tables and cutting equipment.

Sewing machines: straight, zig-zag, triple drag, overlock, and others.

Stapling machines, forging buttons, placing brooches, pasting, and welding.

Different ironing posts.

Tools and Accessories.

6. First-level maintenance of machines, tools and accessories

Preparing and operational maintenance equipment.

Preventive and corrective maintenance.

Machine technical manuals.

Machine and equipment handling manuals.

Top-level maintenance.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of trainer or trainer:

1. Domain of knowledge and techniques related to the performance of the ungarnishing, preparation and mounting of the upholstered furniture, which shall be accredited by one of the following two forms:

-Level 1 academic training (Spanish Framework of Qualifications for Higher Education) or other higher level education related to the professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2. Accredited pedagogical competence in accordance with what is established by the competent administrations.

FORMATIVE MODULE 3: WALL ENTELATION AND WALL PANEL UPHOLSTERY

Level: 1

Code: MF0430_1

Associate to UC: Perform framing, garnish and wall entelting, and upholstered wall panels

Duration: 90 hours

Assessment Capabilities and Criteria:

C1: Distinguished wall and ceiling entelting processes and wall-panel upholstery.

CE1.1 Identify wall, ceiling, and upholstered wall-entelling materials from wall panels, according to customer conditions.

CE1.2 Interpret the technical information needed to know the walls, ceilings, and upholstered process of wall panels.

CE1.3 Select the templates for parts and components by linking them to their direct measures.

C2: Point to point the basic machines and tools, according to techniques of cutting, assembling or assembling and requirements of the materials.

CE2.1 Distinguished the operators of the cutting machines, assembled and finished from the manual of the machines.

CE2.2 In a practical, upholstered furniture scenario, apply the adjustment and readjustment of the machines as part of the process according to the manual of the machines.

CE2.3 In a scenario of upholstered furniture, applying the maintenance of machines and tools according to technical instructions and complying with safety regulations.

C3: Operate on the preparation, marking, cutting and assembling of different materials according to procedure and complying with safety regulations.

CE3.1 Classify different types of materials (unstitched or stitched fabric, mulleton or guata, and others) for the extended on the cutting table, according to order of manufacture.

CE3.2 In a practical case of entelling or taping of murals, from the order of manufacture, under the supervision of a responsible person:

-Make the marking and cutting of the pieces by controlling the motifs, attachment points, ornament placement, among others, identifying them for assembly.

-Apply the assembly of the parts, confronting the splices according to the reasons and order of assembly.

CE3.3 Describe failures and defects produced in cutting and assembling materials by controlling quality according to procedures.

CE3.4 Code the documentation generated in the process preparation, marking, cutting, and assembly according to company procedures.

C4: Prepare the panel for wall or ceiling entelting by placing the frame and muleton or guata according to order of manufacture, under the supervision of a responsible person.

CE4.1 Describe wall or ceiling entelling procedures by different techniques, according to manufacturing orders.

CE4.2 Identify the tools and techniques used in the process of cutting walls or ceilings, according to procedures.

CE4.3 Prepare the frame-frame, selecting the rastrels, lining the gaps, and placing the mulleton, according to technical instructions, under the supervision of a responsible person.

CE4.4 In a practical case of wall and ceiling entelting, elaborate the panels by hiding the staples, according to the technical tab, under the supervision of a responsible person.

CE4.5 Develop the documentation generated in the walls and ceilings process according to company procedures.

C5: Organize the preparation and upholstery of wall panels, according to the procedures, under the supervision of a responsible person.

CE5.1 Describe the upholstery procedures of wall panels: headlining, biombos, rigid galleries, or lambrequins by different techniques, controlling the parameters involved, according to the production sheets.

CE5.2 Classify the materials used in the wall of wall panels, according to order of manufacture.

CE5.3 Identify the tools and procedures used according to the type of wall panels.

CE5.4 In a practical scenario of obtaining headboards, biobbs, rigid galleries or lambrequins, elaborate the upholstery in wall panels according to the order of manufacture.

CE5.5 Code the documentation generated in the process of upholstering wall panels (headlining, biombos, rigid galleries or lambrequins, among others) according to company procedures.

Capabilities whose acquisition must be completed in a real work environment:

C1 with respect to CE1.3; C2 with respect to CE2.2 and CE2.3; C3 with respect to CE3.2; C4 with respect to CE4.4; C5 with respect to CE5.4.

Other capabilities:

Take responsibility for the work you are developing.

Demonstrate interest and concern for meeting customer needs successfully.

Finish the job within the set deadlines.

Communicate effectively with the right people at every moment, respecting the channels established in the organization.

Habit to the organization's work rate.

Transfer information clearly, in an orderly, structured, clear and precise manner respecting the channels established in the organization.

Contents:

1. Wall and ceiling panels, wall and ceiling panels

Styles, types, shapes, and features.

Measurement and calculation of materials.

Erelling Techniques.

2. Wall, ceiling and upholstery materials for wall panels

Fabrics.

Fornitures: centers, entrees, ribbons, bieses, laces, handrails.

Accessories and/or prefabricated components.

Fillers: guata, mulleton, plant crin, pens, cotton, and others.

3. Machines, tools and accessories

Tables and cutting equipment.

Sewing machines: straight, zig-zag, triple drag, overlock, and others.

Stapling Machines.

ironing posts.

Tools and Accessories.

4. First-level maintenance of machines, tools and accessories

Preparing and operational maintenance equipment.

Preventive and corrective maintenance.

Machine technical manuals.

Top-level maintenance.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of trainer or trainer:

1. Domain of knowledge and techniques related to the realization of the framing, garnish and wall entelling, and upholstery of wall panels, which will be accredited by one of the following two forms:

-Level 1 academic training (Spanish Framework of Qualifications for Higher Education) or other higher level education related to the professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2. Accredited pedagogical competence in accordance with what is established by the competent administrations.

ANNEX II

PROFESSIONAL QUALIFICATION: REPAIR OF FOOTWEAR AND LEATHER GOODS

Professional Family: Textile, Clothing and Skin

Level: 1

Code: TCP139_1

General Competition

Repair breaks and damage, and/or replace parts in any type of footwear or leather goods, applying the necessary techniques and procedures, achieving the restored and finished article, within the specified time limits, in security and environmental protection conditions.

Competition Units

UC0438_1: Perform provisioning and servicing the client for shoe repair

UC0439_1: Perform repair on Moroccan items

UC0440_1: Perform shoe repair

Professional Environment

Professional Scope

Develops its professional activity in the area of clothing, dedicated to the repair of footwear and leather and leather goods, in entities of a private nature, small or micro-sized enterprises, both for account as an outsider, irrespective of its legal form. It develops its activity depending on its case, functional and/or hierarchically of a superior. The principles of universal accessibility are applied in the development of professional activity in accordance with the applicable regulations.

Productive Sectors

It is located in the production sector of footwear and leather goods, in the subsector related to the repair of footwear, leather goods and leather goods.

Relevant Occupations and Jobs

The terms of the following relationship of occupations and jobs are used with a generic and omnicomprensivo character of women and men.

Shoe-shoe repairers

Moroccan Leather Assistants

Footwear Repair Helpers

Associated Training (270 hours)

Training Modules

MF0438_1: Materials and services in footwear and leather repair (60 hours)

MF0439_1: Repair of leather goods (90 hours)

MF0440_1: Shoe Repair (120 hours)

COMPETITION UNIT 1: PERFORM PROVISIONING AND CUSTOMER SERVICE FOR SHOE REPAIR

Level: 1

Code: UC0438_1

Professional realizations and realization criteria:

RP 1: Understand the customer in the shoe repair facility to determine the service according to the instructions of the responsible personnel.

CR 1.1 Customer needs are met according to the customer's characteristics, depending on the service request.

CR 1.2 Client requirements are identified, using question and active listening techniques, to determine the service that you may need.

CR 1.3 Complaints and complaints from clients that exceed their liability are transmitted to the immediate responsible staff, following the established procedure.

RP 2: Perform the receipt and storage of items to be repaired, in accordance with pre-fixed criteria and instructions and, where applicable, under the supervision of responsible personnel.

CR 2.1 The receipt of the footwear or leather goods item is made by completing the record sheet with the customer's data, type of item and the possibility of repair.

CR 2.2 Unperfect articles are detected for repair by indicating the failures of the materials, caused by improper manufacturing or wear by the use.

CR 2.3 Repair operations are determined by observing the deterioration produced in the article, for repair.

CR 2.4 The repair budget is made on a fee basis taking into account its technical, aesthetic and quality characteristics.

CR 2.5 The accepted items and/or materials, with their repair order, are stored in the containers or areas arranged for the purpose.

CR 2.6 The established procedures and material handling are carried out in accordance with the applicable regulations on prevention of occupational risks and environmental protection.

RP 3: Carry out the reception, distribution and storage of the goods for later use in the repair of footwear and leather goods, according to quality criteria and prefixed instructions and, where appropriate, under the monitoring of responsible personnel.

CR 3.1 The materials received are labeled identifying them for immediate control.

CR 3.2 The established procedures and material handling are performed according to the instructions received.

CR 3.3 The identified materials are stored in the containers or areas arranged for the purpose according to the labeling for later use and localization.

CR 3.4 Temperature, humidity, warehouse lighting are in line keeping materials in perfect condition.

RP 4: Choose the materials (skins and hides, threads, woven fabrics and non-woven fabrics, auxiliary materials) identifying the origin and characteristics of the materials, for their application in the process of repair of footwear and leather, and where appropriate, under the supervision of responsible personnel.

CR 4.1 Materials and products are chosen according to their presentation, labelling, origin, composition and characteristics, preparing them according to the manufacturing order.

CR 4.2 The skins are selected by matching model, characteristics (dimensions, thickness, prestes and batches, defects, among others) and applications, forming lots according to the technical tab.

CR 4.3 Non-woven fabrics or fabrics are selected by their structure and by their general characteristics, ennoblement operations, finishes, making collection thereof, according to the production order.

CR 4.4 Auxiliary materials and supplements (lids, templates, filies, zippers, buckles, among others) are selected by their shapes and/or characteristics, relating to the operations of the technical tab.

CR 4.5 Material preparation and movement procedures are performed in compliance with applicable safety and health and environmental protection regulations.

CR 4.6 The status of the skins is maintained by applying the conservation conditions.

Professional context:

Production media:

Parts and components of tissues, non-woven, leather, leather and accessories. Machines: to widen shoes and boots, to repair shoes, to sew soles and others. Glues and glues, silicones and solvents. Repair materials: filis, lids, jigs, latex plates, and others. Accessories: buckles, closures, ornaments, cordons. Cleaning and care products: creams, fats, dyes, sprays and others. Price tariffs. Containers.

Products and results:

Basic customer care. Resolution of complaints and complaints. Reception and storage of goods. Textile materials, leather and auxiliary accessories for footwear and leather goods repair.

Information used or generated:

Physical samples, technical tabs, visual media, graphics, computer systems. Schema of the processes. Purchase orders. Customer demand. Conservation label. Label of origin or provenance. Classification instructions. Albaranes. Chips with tests. Repair orders. Receipt of the article. Customer identification tag, provenance, and date of collection.

COMPETITION UNIT 2: PERFORM REPAIR ON MOROCCAN GOODS

Level: 1

Code: UC0439_1

Professional realizations and realization criteria:

RP 1: Organize the position of work by making use of the order to repair items of leather goods in order to achieve the required quality, in the established time.

CR 1.1 The article (bag, wallet, suitcase, belt among others), raw materials, techniques and procedures are identified, analyzing the repair order.

CR 1.2 The identified materials are supplied in sufficient quantity and with the required quality in accordance with the Moroccan article to be repaired according to the conditions agreed with the customer.

CR 1.3 The measures or templates of the parts contained in the repair order are checked against the dimensions of the parts from the disassembled or through the direct measures of the article.

RP 2: Perform first-level operations, adjustments, and maintenance of machines and tools for the repair of Moroccan goods, and where appropriate, under the supervision of responsible personnel.

CR 2.1 Machines and tools are prepared according to the order of repair of leather goods and types of materials used.

CR 2.2 The operator elements of the machines (cutting, assembling and finishing) and tools for the repair of the leather goods are adjusted according to the material.

CR 2.3 The operating conditions of the machines and tools for the repair of the leather goods are modified to be readjusted on the basis of the results of the test operations.

CR 2.4 The first level maintenance is performed according to the technical documentation, detecting the failures of the productive elements of the machines and replacing the damaged or worn out to restore the conditions of the operation, within the assigned responsibility.

RP 3: Perform the disassembled of the leather article by identifying the parts for use as a template, and where appropriate, under the supervision of the responsible personnel.

CR 3.1 The unmounted procedure of the article is done by following the preset sequence (unsewn, unsewn, zipper removal, parts, rivets, among others) according to the procedures for use as a template.

CR 3.2 The worn pieces of extracted materials (exterior, filling, and/or lining) are marked by identifying with the corresponding name and pointing to the direction in which they were placed in the leather goods article.

CR 3.3 The templates or patterns of the pieces of the leather goods are made from the reproduction on paper or cardboard of the removed parts and/or the measures taken, indicating the signs corresponding.

CR 3.4 The disassembly of leather goods is carried out in compliance with the applicable safety and health and environmental protection regulations.

RP 4: Mark the parts and accessories for the repair of leather goods, taking into account the characteristics of the materials, for later cutting, and, where appropriate, under the supervision of the staff responsible.

CR 4.1 Materials (fabric or outer skin, inner fabric, filling, lining, among others) are prepared taking into account their conditioning (texture, color, drawing, defects, among others) and number of pieces.

CR 4.2 The spread of leather and leather in the repair of leather goods is performed by checking the loan, without tension and without folds, facilitating the marking and cutting.

CR 4.3 The fabric in the repair of leather goods is extended on the table according to the procedure (single or multi-layer, no folds, aligned, with tension, direction of thread and direction, among others).

CR 4.4 The spread of fillers in the repair of leather goods (guata, foams and others) is placed on the table preventing mobility, facilitating the marking and subsequent cutting.

CR 4.5 Parts in the repair of leather goods are marked from the shape and/or dimension of the pattern or template, pointing to pickets and perforations, according to technical specifications.

CR 4.6 The cut in the repair of leather goods is carried out by established procedures and techniques, adjusting it to the shape and size indicated, without deformation of the parts profiles, marking pickets and perforations.

CR 4.7 The cut components are identified by grouping according to the order of repair, checking that the pieces match the criteria set, separating the defective ones and reputting them to the correct ones.

CR 4.8 The documentation generated in the marking and cutting of leather goods is completed according to the established procedures.

CR 4.9 The marking and cutting of the patterns of leather goods is carried out in compliance with the applicable safety and health and environmental protection regulations.

RP 5: Assemble by stitching or other bonding technique, parts and accessories for the repair of the leather goods item according to the order of repair, and where appropriate, under the supervision of the responsible personnel.

CR 5.1 The preparation for assembling the parts is done according to the technical information, in the order of repair.

CR 5.2 The quality of the parts and/or materials prepared for the repair of the leather goods item is checked for the form and appearance, and placement of ornaments and/or fornitures, according to the order of repair, correcting possible failures.

CR 5.3 The auxiliary and ornamental elements (zipper, buckles, cantonera, among others) are incorporated into the article, according to design, according to the order of repair.

CR 5.4 The parts are joined by hand or machine, taking into account the characteristics of the material, the type of assembly to be applied, following the pre-set sequence according to the order of repair.

CR 5.5 The defects or defects in the repaired Moroccan article are corrected under the responsibility of the operator, communicating it to the person responsible.

CR 5.6 The generated documentation is completed according to established procedures.

CR 5.7 The assembly of leather goods is carried out in compliance with the applicable safety and health and environmental protection regulations.

RP 6: Perform the finishing operations according to the characteristics of the leather goods item and, where appropriate, under the supervision of the responsible personnel, to confer upon the article repaired the appearance of final presentation.

CR 6.1 The preparation of the repaired item is performed according to the technical information.

CR 6.2 The repaired article is positioned according to the structure thereof, the material, measure and shape for finishing and prior cleaning, according to the repair order.

CR 6.3 The article of the leather goods is dyed so that the ink does not form drops and that it penetrates within the wrinkles that it can have the same, according to the order of repair.

CR 6.4 Finishing operations are performed by entrusting you with your final appearance based on the article, with the indications of a responsible person.

CR 6.5 Finishing defects or defects are corrected under the responsibility of the operator, communicating it to the responsible personnel in charge.

CR 6.6 The generated documentation is completed according to the established procedures.

CR 6.7 The finishing of leather goods is carried out in compliance with the applicable safety and health and environmental protection regulations.

Professional context:

Production media:

Tables and cutting equipment. Labeling machine. Flat sewing machines: of a straight weight, zig-zag, double-rate, triple-drag, of overlock. Column sewing machines. Gluing and welding machines. Different ironing posts. Equipment for the preparation and operational maintenance of machines. Personal protective equipment.

Products and results:

Repaired Moroccan items.

Information used or generated:

Work orders of the workshop staff. Technical manuals of the machines. Machine and equipment handling manuals. Maintenance and security manual. Consumption of materials. Product result. Incidents.

COMPETITION UNIT 3: PERFORM SHOE REPAIR

Level: 1

Code: UC0440_1

Professional realizations and realization criteria:

RP 1: Organize the workstation by making use of the shoe repair order in order to achieve the required quality, in the time set.

CR 1.1 Footwear, raw materials, techniques and procedures for repair are identified by analyzing the work order.

CR 1.2 The identified materials are supplied in sufficient quantity and with the required quality according to the type of repair of the footwear, allowing their execution according to the conditions agreed with the customer.

CR 1.3 The measures or templates of the parts contained in the repair order are checked against the dimensions of the parts of the disassembled or through the direct measures of the footwear.

RP 2: Perform first-level tuning and maintenance operations of machines and equipment for shoe repair and, where appropriate, under the supervision of responsible personnel.

CR 2.1 The machines and tools are prepared according to the order of repair, type of footwear and types of materials used.

CR 2.2 The operator elements of the machines (cutting, assembling, finishing bench, finishing) and tools for the repair of the footwear are adjusted, regulated according to the material.

CR 2.3 The operating conditions of the machines and tools for the repair of the footwear are modified by readjusting on the basis of the results of the test operations.

CR 2.4 The first level maintenance is performed according to the technical documentation, detecting the failures of the productive elements of the machines and replacing the damaged or worn out to restore the conditions of the operation, within the assigned responsibility.

RP 3: Perform the disassembly of worn or worn parts of the footwear, identifying them for use as a template and, where appropriate, under the supervision of the responsible personnel.

CR 3.1 The defective, untaken or worn-out parts of the footwear (unsewn parts, independent cambrillon, soles, lids, heel, etc.) are extracted according to the predetermined sequence, for replacement, according to the procedures.

CR 3.2 Parts of extracted materials (parts, soles, lids, etc.) are marked by identifying with the name and address in which they were placed in the footwear.

CR 3.3 The insoles or patterns of the footwear parts are reproduced on paper or cardboard of the removed parts, indicating the corresponding signs and identifying the patterns.

CR 3.4 The shoe disassembly is performed in compliance with applicable safety and health and environmental protection regulations.

RP 4: Mark the removed parts of the footwear for repair taking into account the characteristics of the materials, for later cutting, and where appropriate, under the supervision of the responsible personnel.

CR 4.1 The materials (parts, lining, heel, soles, lids, templates, among others) are prepared taking into account their conditioning (texture, color, drawing, defects, among others), and number of pieces.

CR 4.2 The spread of the skin and leather for the repair of footwear is carried out on the table by checking the direction of the loan, quality zone, tonality, direction of the hair or scales, among others, facilitating the marking and the cut.

CR 4.3 The fabric for the repair of footwear extends over the table by following the process (unicapa or multilayer) without folds, aligned, with tension, sense of thread and direction.

CR 4.4 Parts for shoe repair are marked from the shape and/or dimension of the pattern or template, pointing to picketing and perforations, according to technical specifications.

CR 4.5 The cut for the repair of footwear is performed by the procedures and techniques established in the repair order by adjusting it to the shape and size indicated, without deformation of the parts profiles, marking pickets and perforations.

CR 4.6 The cut components are identified by grouping according to the order of repair, checking that the pieces match the criteria set, separating the defective ones and reputting them to the correct ones.

CR 4.7 The documentation generated in the shoe marking and cutting is completed according to the established procedures.

CR 4.8 The marking and cutting of footwear patterns is performed in compliance with applicable safety and health and environmental protection regulations.

RP 5: Assemble by stitching or other bonding technique, parts and accessories for the repair of the footwear according to the repair order and where appropriate, under the supervision of the responsible personnel.

CR 5.1 The pieces of the footwear are prepared according to the order of repair, means and materials necessary and correcting the detected anomalies, for the assembly.

CR 5.2 Parts are assembled by hand or machine, depending on the characteristics of the material, signals, and type of assembly (stitching, pasting, and/or other) following the preset sequence in the repair order.

CR 5.3 The change of independent cambrillón or heel (case of breakage) is made by taking off the heel to the area that allows the removal of the same and supports the new placement, for replacement.

CR 5.4 The soles and lids (lids and filies and others) are replaced, milling the assembled pieces and dyeing the worn edges, according to the order of repair.

CR 5.5 The auxiliary and ornamental elements (zipper, buckles, among others) are incorporated in the article, according to design, type of footwear and repair, indicated in the order of repair.

CR 5.6 The width of the footwear interior is made by placing the same in interchangeable metal moulds, adapted to the measure by pressure from the inside, especially in the area of fingers, instep and heel, following the client's instructions, to accommodate the required size.

CR 5.7 Fixed shoe defects or defects are corrected under the responsibility of the operator communicating to the person responsible.

CR 5.8 The generated documentation is completed according to established procedures.

CR 5.9 The marking and cutting of footwear patterns is performed in compliance with applicable safety and health and environmental protection regulations.

RP 6: Perform the shoe finishing operations according to their characteristics and, where appropriate, under the supervision of the responsible personnel, in conditions of safety and environmental protection.

CR 6.1 The preparation of the repaired footwear for finishing is performed according to the technical information of the repair order.

CR 6.2 The shoe is cleaned after cleaning so that the ink does not form drops and penetrates the wrinkles that it can have, according to the order of repair.

CR 6.3 Finishing operations are performed according to the type of footwear by positioning it on the finisage or finishing table, according to the order of repair, to give it its final appearance for sure.

CR 6.4 Repair completion defects or defects are corrected under the responsibility of the operator, communicating to the person responsible.

CR 6.5 The generated documentation is completed according to the established procedures.

CR 6.6 Footwear finishing operations are performed in compliance with applicable safety and health and environmental protection regulations.

Professional context:

Production media:

Tables and cutting equipment. Labeling machine. Flat sewing machines: of a straight weight, zig-zag, double-rate, triple-drag, of overlock. Arm and column sewing machines. Gluing and welding machines. Ironing posts. Presses. Equipment for the preparation and operational maintenance of machines. Bank of finisage. Cardas. Paste machine. Recessed machine. Split machine. Machine for turning. Machine for widening gaps. Oven for reactivating, nail extractors, working feet, pneumatic and electric nail guns, sharpening machines, among others. Personal protective equipment.

Products and results:

Repaired shoes to which they have been placed, lids, filis, heels, velopes, living, among others.

Information used or generated:

Work orders of the workshop staff. Technical manuals of the machines. Machine and equipment handling manuals. Maintenance and security manual. Consumption of materials. Product result. Parts of incidents.

TRAINING MODULE 1: MATERIALS AND SERVICES IN FOOTWEAR AND LEATHER REPAIR

Level: 1

Code: MF0438_1

Associate to UC: Perform provisioning and customer service for shoe repair

Duration: 60 hours

Assessment Capabilities and Criteria:

C1: Apply communication techniques in customer care in footwear and leather repair establishments following the instructions of the responsible personnel.

CE1.1 Describe the qualities that you must possess and the attitudes that you must develop by taking care of the client in business relationships.

CE1.2 Identify the variables involved in the behavior and motivations of the client according to their requirements.

CE1.3 In a convenient customer service scenario, you can perform the communicative process as part of the customer service.

CE1.4 Identify the accompanying documentation for customer service operations, according to the procedures.

C2: Recognize items for footwear and leather repair, storing them according to the instructions of a person responsible.

CE2.1 Identify materials, footwear and leather products, storing them according to the possibility of repair.

CE2.2 Distinguished repair or replacement parts according to the footwear or leather goods item.

CE2.3 Plantate repair budgets based on rate.

CE2.4 Describe procedures for storing materials according to technical data sheets.

CE2.5 Interpret and fill out inventory/inventory tabs according to procedures.

CE2.6 In a practical scenario for the distribution and storage of footwear and leather goods, on the basis of the instructions received from the person responsible:

-Label the materials according to their usage characteristics.

-Identify handling and storage procedures as per the labeling.

-Control the temperature, humidity and lighting of storage areas by adapting to the type of materials.

C3: Recognize the characteristics of skins and hides according to the article to be repaired.

CE3.1 Recognize the different types of skins and hides according to their origin and presentation.

CE3.2 Identify defects in skins and hides due according to reference samples.

CE3.3 Classify finished skins according to size, thickness, and defects.

CE3.4 In a practical case of skin recognition, classify hides and skins due to their origin, characteristics and defects according to reference samples as part of the process of repair of footwear and leather.

C4: Recognize the materials (skins and hides, threads, woven fabrics and non-woven fabrics), according to their application in the process of repair of footwear and leather.

CE4.1 Identify textile materials (yarns, fabrics, and nonwoven fabrics) according to their labeling.

CE4.2 In a practical case of skin or tissue recognition, the textile products are visually discriminated against by their characteristics as part of the process for the repair of footwear and leather goods.

CE4.3 Identify textile ennoblement treatments according to their characteristics.

CE4.4 Recognize the characteristics of textile products according to reference samples.

C5: Recognize auxiliary materials and accessories used in the process of repairing footwear and leather as instructed by a responsible person.

CE5.1 Recognize the characteristics of auxiliary materials according to the technical tab.

CE5.2 Defend add-ons, lids, templates, filis, zippers, buckles, among others, according to your application.

CE5.3 Relate the auxiliary materials and add-ons to the sequence of operations according to the technical tab.

Capabilities whose acquisition must be completed in a real work environment:

C1 with respect to CE1.3; C2 with respect to CE2.6; C3 with respect to CE3.4; C4 with respect to CE4.2 and CE4.4.

Other capabilities:

Take responsibility for the work you are developing.

Treat the customer with courtesy, respect and discretion.

Demonstrate interest and concern for meeting customer needs satisfactorily. Communicate effectively with the right people at every moment, respecting the channels established in the organization.

Habit to the organization's work rate.

Transfer information clearly, in an orderly, structured, clear and precise manner respecting the channels established in the organization.

Contents:

1. Textile materials (yarns, fabrics, non-woven fabrics), skins and hides and skins

Classification, features, and properties.

Elementary identification procedures.

Defects of textile materials, skins and hides.

Finishes.

Commercial presentation.

2. Auxiliary materials

Caps, filis.

Fornitures and stokes, accessories and/or prefabricated components.

Ornamental: nails with head, tack.

Components and floors for footwear.

3. Customer support

Features, functions, attitudes and knowledge. Communication skills.

Relationships with clients.

Documentation attached to sales operations.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of trainer or trainer:

1.-Domain of knowledge and techniques related to the realization of supply and customer service for the repair of footwear, which will be credited by one of the following two ways:

-Level 1 academic training (Spanish Framework of Qualifications for Higher Education) or other higher level education related to the professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2.-Accredited pedagogical competence according to what the competent administrations establish.

TRAINING MODULE 2: REPAIR OF MOROCCAN GOODS

Level: 1

Code: MF0439_1

Associate to UC: Perform repair on leather goods

Duration: 90 hours

Assessment Capabilities and Criteria:

C1: Organize the job position according to the order of repair of Moroccan goods.

CE1.1 Identify items, raw materials, and processes used for the repair of leather goods according to the order of manufacture.

CE1.2 In a practical work organization scenario identify the materials as part of the Moroccan article according to order of repair.

CE1.3 In a case repair scenario of leather goods, verify the measures or templates of the parts from the disassembled, according to the order of repair.

C2: Apply first-level maintenance operations on machine and tools for the repair of Moroccan goods, as instructed by a responsible person.

CE2.1 Identify machines and tools according to the order of repair of Moroccan goods.

CE2.2 Interpreting machine manual and technical information and relating it to first-level operation, tuning, and maintenance.

CE2.3 In a practical case of repair of leather goods, following the instructions of a responsible person:

-Prepare the machines, adjusting them as part of the process.

-Apply first-level maintenance of the machine and tools according to the manual of the machine and tools.

C3: Perform the unmounted of the Moroccan article by defining its use as a template, as instructed by a responsible person.

CE3.1 Describe the procedures for unmounted items of leather goods from the repair sheet.

CE3.2 In a practical case of disassembled of leather goods following the instructions of a responsible person.

-Identify the model, parts, and their unmounted order, relating it to the technical tab.

-Play the templates or patterns with the marking of the parts marking.

CE3.3 Classify the pieces that are removed from the leather article, placing them in a new location.

C4: Prepare materials using different cutting procedures according to the manufacturing order, applying security criteria.

CE4.1 Describe the preparation of different materials for the repair of leather goods.

CE4.2 In a practical case of cutting parts for the repair of leather goods, according to the instructions of a responsible person:

-Prepare the material according to its characteristics.

-Apply the extended material, detecting possible defects or defects.

-Apply the marking, executing the cut as part of the process of repairing the Moroccan goods according to order of repair.

-Check the quality of the cut components, communicating the detected failures.

-Group the cut components, packaging them.

CE4.3 Classify cut materials according to company procedures.

CE4.4 Prepare the documentation regarding the cutting process for the repair of leather goods, according to order of repair.

C5: Perform preparation and assembly operations of parts for repair of Moroccan goods according to the order of repair.

CE5.1 Describe assembly systems based on the type of join, media, and materials to be used according to the order of repair of Moroccan goods.

CE5.2 In a practical case of assembling parts and materials for the repair of leather goods, according to instructions received:

-Prepare the components on the basis of the materials to assemble, according to the order of cutting.

-Identify the necessary machines, tools, and tools, by selecting each one based on the assembly.

-Select procedures based on certain assembly criteria and join elements.

-Concrete the sequence of assembly operations, based on quality criteria set by the company.

-Apply the union of auxiliary parts and materials as part of the production process according to the order of repair.

CE5.3 Code the documentation generated according to company procedures.

C6: Perform the finishing operations of repaired Moroccan items according to the orders of a responsible person.

CE6.1 Describe finishing procedures in the repair of leather goods (tinting, waxes, polishing, glitter and others), according to the repair orders.

CE6.2 In a scenario of changing color of a leather goods item, according to instructions received:

-Organize the dyeing operations according to the media and materials to be used, according to the order of repair.

-Perform pre-tincture cleaning and drying operations.

-Perform the tincture by checking to penetrate the wrinkles you may have, avoiding droplet formation.

-Meet documentation according to company procedures.

CE6.3 In a practical scenario of finishing in the repair of leather and/or fabric, under the supervision of a responsible person:

-Organize the finishing operations on the repair, media and materials to be used, according to the order of repair.

-Perform finishing operations according to the techniques of each operation (pistol, brush, waxing, polishing, and others).

-Verify the quality of the repaired Moroccan item finish by correcting the detected failures.

-Meet documentation according to company procedures.

Capabilities whose acquisition must be completed in a real work environment:

C1 with respect to CE1.2 and CE1.3; C2 with respect to CE2.3; C3 with respect to CE3.2; C4 with respect to CE4.2; C5 with respect to CE5.2; C6 with respect to CE6.2 and CE6.3.

Other capabilities:

Take responsibility for the work you are developing.

Comply with the production standards set by the organization. Finish the job within the set deadlines.

Maintain the work area with the degree of order and cleanliness required by the organization. Interpret and execute work orders.

Communicate effectively with the right people at every moment, respecting the channels established in the organization.

Contents:

1. Articles of leather goods

Types and features: handbags, belts, covers, wallets, wallets, suitcases, cases, and others.

Technical Tabs.

Removing component patterns. Set of templates or patterns.

2. Materials used in the repair of leather goods

Fabrics, skins, hides, laminates, synthetics, polymers. Tissues: coating.

Fill: foams, crow, stone cardboard and others. Supports: accessories and/or prefabricated components. Threads: thickness, strength, quality.

Pegaments and tails, silicones and solvents: characteristics, conservation and safety in use. Trimmings, fornitures and auxiliary supplements used in leather goods.

Tins and waxes. Types and applications.

3. Machines and Maintenance

Cutting, assembly and finishing machines. Maintenance manual.

Preventive and corrective maintenance.

Technical tabs and maintenance manuals.

4. Operations applied to the repair of leather goods

Cutting techniques: manual and conventional, pressure and automatic. Parameters of the cut. Machines and tools.

Sequence of conventional cut operations: Destroy and refine. Preparation and spread of skins, tissues and other materials.

Court of different materials.

Assembly by different techniques: stitching, pasting, and others. Finished components loose.

Finished item finish.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of trainer or trainer:

1. Domain of knowledge and techniques related to the performance of repair on leather goods, which will be accredited by one of the following two forms:

-Level 1 academic training (Spanish Framework of Qualifications for Higher Education) or other higher level education related to the professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2. Accredited pedagogical competence in accordance with what is established by the competent administrations.

TRAINING MODULE 3: SHOE REPAIR

Level: 1

Code: MF0440_1

Associate with UC: Perform shoe repair

Duration: 120 hours

Assessment Capabilities and Criteria:

C1: Organize the job position according to the shoe repair order.

CE1.1 Identify items, raw materials, and processes used in the repair of footwear according to the order of repair.

CE1.2 In a practical scenario of organizing the shoe repair job, identifying the materials as part of the footwear according to the order of repair.

CE1.3 In a convenient shoe repair scenario, verify the measurements or templates of the parts from the unmounted, according to the order of repair.

C2: Apply first-level maintenance operations to machines and tools in the repair of shoes, as instructed by a responsible person.

CE2.1 Identify machines and tools according to the shoe repair order.

CE2.2 Interpret the technical and manual information of machines relating to the operation, entry to point and maintenance of the first level.

CE2.3 In a scenario of preparing a shoe repair, assembly or repair machine, following the instructions of a responsible person:

-Prepare the machines, adjusting them as part of the process.

-Apply first-level maintenance of the machine and tools according to the manual of the machine and tools.

C3: Perform the shoe disassembly by defining its use as a template, as instructed by a responsible person.

CE3.1 Describe the footwear unmounted procedures from the repair order.

CE3.2 Describe shoe pattern procedures for obtaining templates from the dismounted parts.

CE3.3 In a practical scenario of shoe disassembly following the instructions of a responsible person:

-Identify the model, parts, and their unmounted order, relating it to the technical tab.

-Play the templates or patterns with the marking of the parts marking.

-Classify the pieces that are removed from the leather item for new placement.

C4: Prepare materials using different cutting procedures according to the manufacturing order, applying security criteria.

CE4.1 Describe the preparation of different materials for shoe repair.

CE4.2 In a practical case of cutting parts for footwear repair, according to the instructions of a responsible person:

-Prepare the material according to its characteristics.

-Select the extended according to the type of material by detecting possible defects or defects.

-Mark parts as part of the shoe repair process according to order of repair.

-Select the type of cut according to the material to be cut.

-Check the quality of the cut components, communicating the detected failures.

-Group the cut components, packaging them.

CE4.3 Prepare the documentation regarding the cutting process for the repair of leather goods, according to order of repair.

C5: Apply preparation and assembly operations, for shoe repair according to the repair order.

CE5.1 Describe assembly systems based on the type of join, media, and materials to be used, according to the repair order.

CE5.2 Describe the replacement operations of components such as cambrillons, heels, soles, lids, or prefab among others to replace the damaged ones according to the order of repair.

CE5.3 In a scenario of replacing components for shoe repair, according to instructions received:

-Prepare the components on the basis of the materials to be repaired, according to the order of repair.

-Identify the necessary machines, tools, and tools, by selecting each of them according to the repair.

-Select procedures based on certain assembly and join criteria.

-Concrete the sequence of repair operations, based on quality criteria set by the company.

-Apply the union of auxiliary parts and materials as part of the production process according to the order of repair.

CE5.4 Code the documentation generated according to company procedures.

C6: Perform the finishing operations on the shoe repair according to the orders of a responsible person.

CE6.1 Describe finishing procedures in the repair of footwear (tinting, waxes, polishing, gloss and others), the means and materials to be used and determining the sequence of operations, according to the repair orders.

CE6.2 In a practical scenario of changing the color of shoes on the skin, according to instructions received:

-Organize the dyeing operations according to the media and materials to be used, according to the order of repair.

-Perform pre-tincture cleaning and drying operations.

-. Perform the tincture by checking that it penetrates the wrinkles you may have by avoiding droplet formation.

-Meet documentation according to company procedures.

CE6.3 In a practical scenario of finishing in the repair of footwear according to instructions received:

-Organize the finishing operations on the repair according to the media and materials to be used according to the repair order.

-Perform operations on the finisage bank with security criteria.

-Perform the finishing operations, depending on the type of operation (pistol, brush, waxing, polishing, and others).

-Check the quality of the finished footwear finish, checking among others the appearance, solidity, as well as the global aspects such as pulchiness and uniformity of the color, correcting the detected anomalies, under the monitoring of a responsible person.

-Meet documentation according to company procedures.

Capabilities whose acquisition must be completed in a real work environment:

C1 with respect to CE1.2 and CE1.3; C2 with respect to CE2.3; C3 with respect to CE3.3; C4 with respect to CE4.2; C5 with respect to CE5.3; C6 with respect to CE6.2 and CE6.3.

Other capabilities:

Take responsibility for the work you are developing.

Comply with the production rules set by the organization.

Finish the job within the set deadlines.

Maintain the work area with the degree of order and cleanliness required by the organization.

Interpret and execute work orders.

Communicate effectively with the right people at every moment, respecting the channels established in the organization.

Contents:

1. Footwear

Types of shoes: gentleman, lady, child, baby, special and safety. Repair and finishing of footwear. Operations and procedures. Technical sheets. Shoe patting. Removing component patterns. Set of templates or patterns.

2. Materials and products used in the repair and maintenance of footwear

Material types: Tissue, skins, hides, laminates, synthetics, polymers. Tissues: coating.

Media: accessories and/or prefabricated components.

Ornaments, fornitures and auxiliary accessories used in footwear. Threads: thickness, strength, quality.

Pegaments and tails, silicones and solvents.

Repair materials: filis, irons, lids, templates. Characteristics, conservation and safety in use. Finishing products (tinctures, waxes, pigments and others). Cleaning and care products: creams, fats, dyes.

3. Machinery, tools and operations applied in the repair of footwear

Cutting, assembling, and finishing machines.

Cutting techniques: manual and conventional, pressure and automatic. Parameters of the cut. Machines and tools.

Conventional cut: features and applications.

Sequence of conventional cut operations: Destroy and refine. Preparation and spread of skins, tissues and other materials.

Court of different materials.

Assembly by different techniques: stitching, pasting, and others. Hand and/or Machine Assembly: Assembly Parameters features and applications. Machines and tools.

Finished components. Final article finish.

4. Shoe finish

Finished components. Final article finish.

Downgrade and split machine.

Hormas machine for ensanche. Applications.

Finisage bank, cardmaker, paste machine. Auxiliary adhesive machines, suction systems.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional profile of trainer or trainer:

1. Domain of knowledge and techniques related to the making of the repair of the footwear, which will be accredited by one of the following two forms:

-Level 1 academic training (Spanish Framework of Qualifications for Higher Education) or other higher level education related to the professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2. Accredited pedagogical competence in accordance with what is established by the competent administrations.