Key Benefits:
In compliance with the provisions of Article 11 (f) of the Infrastructure Regulation for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1995 (BOE of 6 February 1996), and the standards developed by the CEN, CENELEC, ETSI European Standards Bodies and whose national transposition corresponds to the Spanish Association for Standardisation and Certification (AENOR), an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, in accordance with Royal Decree 1614/1985 of 1 August 1986, and recognised for the purposes of the additional provision of Royal Decree 2200/1995 of 28 December 1995.
Having regard to the procedure for the elaboration of European standards, in accordance with paragraph 11.2.6.4 of the common rules of CEN/CENELEC and 13.7 of the rules of procedure of ETSI for the standardisation work of those mentioned European bodies.
This Directorate-General has decided to publish in the Official Gazette of the State, the list of European standards to which the range of Spanish standard has been granted during the month of March 2012 identified by its title and code numerical, indicating their date of availability, as set out in the Annex to this Resolution.
Madrid, April 26, 2012. -Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX
Ratification of European rules. March 2012
| Title | F. Availb. | Anula | ||
|---|---|---|---|---|
|
CEN/TS 15597-2:2012 | Winter Maintenance Equipment. Spreaders. Part 2: Requirements and Trials for Distribution | 2012-01-11 |
| |
|
2252:2012 | Aerospace. Steel FE-PL1505 (15CrMoV6). 1 080 MPa ≤ Rm ≤ 1 250 MPa. Forged pieces and matrized pieces. From ≤ 100 mm | 2012-02-01 |
| |
|
3120:2012 | Aerospace Material. Titanium alloy TI-P64003. Stretched in cold and without tension. Seamless hydraulic tube for applications under pressure-4 mm ≤ D ≤ 51 mm-690 MPa ≤ Rm ≤ 1 030 MPa | 2012-02-01 |
| |
| EN 3155-076:2012 | Aerospace. Electrical contacts used in connection elements. Part 076: Electrical contacts, male, type A, crimped, class R. Product rule. | 2012-01-11 |
| |
| EN 3155-077:2012 | Aerospace material. Electrical contacts used in connection elements. Part 077: Electrical contacts, female, type A, crimped, class R. Product rule. | 2012-01-11 |
| |
| EN 3312:2012 | Aerospace material. Titanium alloy Ti-6Al-4V. Annealing. Forged pieces and matrized pieces-Of ≤ 150 mm | 2012-02-08 |
| |
|
3375-002:2012 | Aerospace. Electric cable for digital data transmission. Part 002: Generalities | 2012-02-01 |
| |
|
4608-003:2012 | Aerospace Material. Fire-resistant electrical cables. Mono and multi-conductor armoured (spiral) and sheathed. Operating temperatures between -65 °C and 260 ° C. Part 003: DN Family. Light driver. Printable with UV laser. Product Standard. | 2012-02-08 |
| |
|
4608-005:2012 | Aerospace Material. Fire-resistant electrical cables. Mono and multi-conductor armoured (spiral) and sheathed. Operating temperatures between -65 °C and 260 ° C. Part 005: DW Family. Light conductor with two gauge 24 cores for data transmission. Printable with UV laser. Product Standard. | 2012-02-08 |
| |
|
4611-002:2012 | Aerospace Material. Electrical cables with a conductor and multiconductors for general use. XLETFE family. Part 002: Generalities | 2012-02-08 |
| |
|
4611-003:2012 | Aerospace Material. Electrical cables with a conductor and multiconductors for general use. XLETFE family. Part 003: Copper sealed. Temperatures of use between -65 ° C and 135 ° C. Single insulated driver for internal applications. Printable with UV laser. Product Standard. | 2012-02-08 |
| |
|
4611-004:2012 | Aerospace Material. Electrical cables with a conductor and multiconductors for general use. XLETFE family. Part 004: Copper sealed. Temperatures of use between -65 ° C and 135 ° C. Double-insulated conductor for external applications. Printable with UV laser. Product Standard. | 2012-02-08 |
| |
|
4611-005:2012 | Aerospace Material. Electrical cables with a conductor and multiconductors for general use. XLETFE family. Part 005: Silver Copper. Temperatures of use between -65 ° C and 150 ° C. Single driver isolated for internal applications. Printable with UV laser. Product Standard. | 2012-02-08 |
| |
|
4611-006:2012 | Aerospace Material. Electrical cables with a conductor and multiconductors for general use. XLETFE family. Part 006: Silver Copper. Temperatures of use between -65 ° C and 150 ° C. Double-insulated conductor for external applications. Printable with UV laser. Product Standard. | 2012-02-08 |
| |
|
4611-007:2012 | Aerospace Material. Electrical cables with a conductor and multiconductors for general use. XLETFE family. Part 007: Nickel-plated Copper. Temperatures of use between -65 ° C and 150 ° C. Double-insulated conductor for external applications. Printable with UV laser. Product Standard. | 2012-02-08 |
| |
|
4611-008:2012 | Aerospace Material. Electrical cables with a conductor and multiconductors for general use. XLETFE family. Part 008: BP. Nickel-plated copper. Temperatures of use between -65 ° C and 150 ° C. Double insulated conductor for external applications with additional protection in areas of high vibrations, bending of cables and fluid contamination. Printable with UV laser. Product Standard. | 2012-02-08 |
| |
|
4611-009:2012 | Aerospace Material. Electrical cables with a conductor and multiconductors for general use. XLETFE family. Part 009: BJ. Nickel-plated copper. Temperatures of use between -65 ° C and 150 ° C. Single conductor insulated for use as cable cores or without equipment in areas of high vibrations, cable bending and fluid contamination. Printable with UV laser. Product Standard. | 2012-02-08 |
| |
|
4704:2012 | Aerospace Material. Aluminium tartaric-sulphuric anodized and aluminium alloys forged for corrosion protection and pre-treatment by paint (TSA). | 2012-02-08 |
| |
|
6059-503:2012 | Aerospace material. Electrical cables, installation. Protective covers. Test methods. Part 503: Warming due to the nominal current injected into the cuff | 2012-01-11 |
| |
| 13861:2011 | Machine Security. Guidance for applying ergonomics rules to machine design. | 2011-10-19 | UNE-EN 13861:2003 | |
|
| 15432-1:2011 | Winter Road Equipment and Maintenance of Service Areas on Roads. Equipment mounted on the front. Part 1: Fixed plates mounted on the front side. | 2011-07-20 | EN 15432:2008 EN 15432 :2008/AC: 2010 |
|
50132-5-1:2011 | Alarm systems. CCTV surveillance systems for use in security applications. Part 5-1: Video transmission. Operating requirements for general video transmission. | 2011-12-23 |
| |
|
50132-5-2:2011 | Alarm systems. CCTV surveillance systems for use in security applications. Part 5-2: IP Video Transmission Protocol. | 2011-12-23 |
| |
|
50411-2-2:2012 | Fiber organizers and wrappers used in optical fiber communication systems. Product specifications. Part 2-2: Channel side of the Type 1 fiber enclosure for S & A category | 2012-01-13 |
| |
| 50411-2-3:2012 | Fiber organizers and wrappers used in optical fiber communication systems. Product specifications. Part 2-3: Integrated side of the Type 1 fiber enclosure for S & A. | 2012-01-13 |
| |
| 60534-8-2:2011 | Industrial Process Regulatory Valves. Part 8-2: Considerations on noise. A laboratory measure of noise generated by a hydrodynamic flow in a regulation valve. | 2011-12-16 |
| |
|
EN 60683:2012 | Industrial electrothermal equipment. Test methods for submerged arc furnaces. | 2012-01-06 |
| |
|
60684-3-116:2011 | Flexible flexible Fundes. Part 3: Specific specifications for specific types of fundas. Sheet 116 and 117: extruded polychlorinated oprene, general use. | 2011-11-11 |
| |
|
61148:2012 | Marking block and valve element assemblies and power converter equipment assemblies. | 2012-01-06 |
| |
|
61788-15:2011 |
Superconductivity. Part 15: Measure of electronic characteristics. Impedance of the intrinsic surface of superconducting films to microwave frequencies. | 2011-12-16 |
| |
|
EN 61850-9-2:2011 | Systems and communication networks for automation of generation facilities. Part 9-2: Communications-specific mapping systems (SCSM). Values sampled on ISO/IEC 8802-3 standard | 2011-12-09 |
| |
|
61937-2:2007/A1:2011 | Digital Audio. Interface for non-linear PCM encoded audio bit streams by applying IEC Standard 60958. Part 2: burst information. | 2011-12-02 |
| |
|
61960:2011 |
Accumulators with alkaline electrolytes or other non-acidic electrolytes. Lithium accumulators for portable applications. | 2011-08-26 |
| |
|
61970-301:2011 | Application Program Interface for Power Management Systems (EMS-API). Part 301: Common Information Model Base (CIM) | 2011-11-18 |
| |
|
62023:2012 | Structures of technical information and documentation. | 2012-01-06 |
| |
| EN 62027:2012 | Preparing the lists of objects including listing of components | 2012-01-06 |
| |
|
62541-4:2011 | OPC Unified Architecture. Part 4: Services. | 2011-12-09 |
| |
|
62541-5:2011 | Unified Architecture OPC. Part 5: Information Model. | 2011-12-09 |
| |
|
62541-6:2011 |
OPC Unified Architecture. Part 6: Mapping. | 2011-12-09 |
| |
|
62541-8:2011 | Unified Architecture OPC. Part 8: Data access. | 2011-12-09 |
| |
|
ISO 9223:2012 |
| 2012-02-01 | EN 12500:2000 | |
|
ISO 9224:2012 |
| 2012-02-01 | EN 12500:2000 | |
| ISO 9225:2012 | Corrosion of metals and alloys. Corrosive of atmospheres. Measurement of environmental parameters that affect the corrosiveness of atmospheres. (ISO 9225:2012) | 2012-02-01 | EN 12500:2000 | |
|
ISO 9226:2012 |
| 2012-02-01 | EN 12500:2000 | |
|
ISO 13678:2012 | Oil and natural gas industries. Assessment and testing of components for threading to be used with the covers, production and channelling pipes and drill rods (ISO 13678:2010) | 2012-01-18 | EN ISO 13678:2009 |
