UNE 21186:2011 ERRATUM: 2012

Lightning protection: Arrays with priming device.

UNE 60404-1:2010/1M: 2012

Fuels fizzy. Pressure and/or measurement adjustment assemblies, with maximum operating pressure (MOP) of less than or equal to 5 bar. Part 1: Underrun, semi-detached or position assemblies in enclosures with equivalent nominal flow rate of less than or equal to 100 m³ (n) /h of natural gas.

UNE 66926:2012

Quality Management Systems. Particular requirements for the application of the UNE-EN ISO 9001:2008 standard in digital tachograph centers.

UNE 66926:2005

UNE 84018:2012

Cosmetic raw materials. Diazolidinil urea.

UNE 84018:1995

84098:2012

Cosmetic raw materials. Imidazolidinil urea.

UNE 84098:1995

84606:2012

Cosmetic raw materials. Determination of higher aromatic compounds contained in saturated (pasty and solid) hydrocarbons obtained from petroleum.

UNE 84606:1996

UNE 84617:2012

Cosmetic raw materials. PEG-3 Diestearate.

UNE 84617:1998

84618:2012

Cosmetic raw materials. PEG-8 Diestearate.

UNE 84618:1998

84631:2012

Cosmetic raw materials. Determination of polycyclic aromatic hydrocarbons in liquid saturated hydrocarbons obtained from petroleum.

UNE 84631:1998

84741:2012

Cosmetic raw materials. Solar filters. Determination of antimony traces in titanium dioxide by graphite-oven atomic absorption spectrometry.

92325:2012 IN

Thermal insulation products in the building. Installation control.

118025:2012

Tobacco and tobacco products. Determination of the ammonium content in tobacco. Methods of analysis by continuous flow and by liquid chromatography.

UNE 118025:2005

135362-1:2012

Vertical Senalization. Beacon. Part 1: Polyvinyl chloride (rigid PVC) edge of the edge. Features, measures, and methods of testing.

UNE 135362:1994 EX

153010:2012

UNE 153010:2003

201007:2007 IN/1M: 2012

Guidelines for the correct use of devices to act by residual differential current (DDR) for domestic and analog use.

207020:2012 IN

Procedure to ensure the protection of the health and safety of persons in electrical testing and high-voltage installations.

302001:2012

Industrial Tourism. Requirements for service delivery.

UNE-CEN ISO/TR 24094:2012 IN

Analysis of natural gas. Validation methods for gaseous reference materials. (ISO/TR 24094:2006)

UNE-CEN/TR 1749:2012 IN

European Schema for Classification appliances using gaseous fuels according to the form of evacuation of combustion products (types).

UNE-CEN/TR 1749:2006 IN

UNE-CEN/TR 1749:2006 IN ERRATUM: 2009

UNE-CEN/TR 15615:2012 IN

Explanation of the overall relationship between different European standards and the Energy Efficiency of Buildings Directive (EPBD). Umbrella document.

UNE-CEN/TR 16227:2012 IN

Oil liquefied products. Biolubricants. Recommendations for terminology and characterization of biolubricants and lubricants based on bio.

UNE-CEN/TR 16298:2012 IN

Textiles and textile products. Smart textiles. Definitions, categorization, applications, and requirements regarding normalization.

UNE-CEN/TS 14416:2012 IN

Geosynthetic Barriers. Test method for determination of resistance to drilling by roots.

UNE 53420:1989

UNE-CWA 16308:2012 IN

Framework for consumer rental conditions.

UNE-CWA 16336:2012 IN

The superfine wool fiber label. Requirements for defining the Super S code

UNE-EN 325:2012

Derivatives of wood. Determining the dimensions of the test pieces.

UNE-EN 325:1994

UNE-EN 488:2012

Tuberies central heating. Pre-insulated piping systems for directly buried hot water networks. Steel pre-insulated valve assemblies for steel service pipes, polyurethane thermal insulation, and external polyethylene protection.

UNE-EN 488:2005

UNE-EN 994:2012

Floor Textiles. Determination of the length, squalor and rectitude of the tiles

UNE-EN 994:1996

UNE-EN 998-2:2012

Specifications for masonry mortars. Part 2: Masonry Morters

UNE-EN 998-2:2004

UNE-EN 1034-3:2012

Security of the machines. Safety requirements for the design and construction of paper manufacturing and finishing machines. Part 3: Rewind and winding machines

UNE-EN 1034-3:2000 + A1:2010

UNE-EN 1428:2012

Betunes and bituminous binders. Determination of water content in bituminous emulsions. Azeotropic distillation method.

UNE-EN 1428:2000

UNE-EN 1563:2012

Foundry. Spheroidal graphite casting.

UNE-EN 1563:1998

UNE-EN 1563/A1:2002

UNE-EN 1563:1998/A2:2006

UNE-EN 1570-1:2012

Security Requirements for Lifting Tables. Part 1: Elevators that serve up to two defined levels.

UNE-EN 1570:1999 + A2:2010

UNE-EN 1889-1:2012

Machinery for underground mining. Mobile machines for underground work. Security. Part 1: Vehicles on tires.

UNE-EN 1889-1:2004

UNE-EN 1998-3:2012

Eurocode 8: Project of seismic-resistant structures. Part 3: Building seismic assessment and adequacy.

UNE-EN 12201-1:2012

Systems The present system is used to channel plastic materials for water and sewerage conduction with pressure. Polyethylene (PE). Part 1: Generalities.

UNE-EN 12201-1:2003

UNE-EN 13244-1:2003

UNE-EN 12201-1:2004 ERRATUM

UNE-EN 13244-1:2004 ERRATUM

UNE-EN 12201-2:2012

Pipeline systems in plastic materials for water and sanitation conduction with pressure. Polyethylene (PE). Part 2: Tubes.

UNE-EN 12201-2:2003

UNE-EN 13244-2:2003

UNE-EN 12201-2:2004 ERRATUM

UNE-EN 13244-2:2004 ERRATUM

UNE-EN 12201-2:2003/1M: 2005

UNE-EN 12201-3:2012

Materials Pipeline Systems plastic for water and sanitation conduction with pressure. Polyethylene (PE). Part 3: Accessories.

UNE-EN 12201-3:2003

UNE-EN 13244-3:2003

UNE 53940:2010

UNE-EN 12201-5:2012

Pipeline systems in plastic materials for water and sanitation conduction with pressure. Polyethylene (PE). Part 5: Attitude to system usage.

UNE-EN 12201-5:2003

UNE-EN 13244-5:2003

UNE-EN 12697-5:2010/AC: 2012

Bituminous mixtures. Test methods for hot bituminous mixtures. Part 5: Determining the maximum density.

UNE-EN 12999:2011 ERRATUM: 2012

Granes. Loading cranes.

UNE-EN 13038:2012

Soil and culture substrates. Determining electrical conductivity.

UNE-EN 13038:2001

UNE-EN 13039:2012

Soil and Cultivation Substrates. Determination of the contents of organic matter and ashes.

UNE-EN 13039:2001

UNE-EN 13041:2012

Soil and Cultivation Substrates. Determination of physical properties. Dry bulk density, air volume, water volume, contraction value, and total porosity.

UNE-EN 13041:2001

UNE-EN 13041:2001/A1:2007

UNE-EN 13081:2009 + A1:2012

Cisternas for the transport of dangerous goods. Service equipment for tanks. Steam collector adapter and coupling.

UNE-EN 13081:2009

UNE-EN 13082:2009 + A1:2012

Cisternas for the transport of dangerous goods. Service equipment for tanks. Steam transfer valve.

UNE-EN 13082:2009

UNE-EN 13411-8:2012

Terminals for Steel cables. Security. Part 8: Enspend and Enspent Terminals

UNE-EN 13451-1:2012

Equipment for swimming pools. Part 1: General safety requirements and test methods.

UNE-EN 13451-1:2001

UNE-EN 13451-3:2012

Equipment for Pools. Part 3: Safety requirements and additional specific testing methods for air/water intake and outlet devices and for leisure accessories using water/air.

UNE-EN 13451-3:2001

UNE-EN 13451-8:2001

UNE-EN 13523-17:2012

Continuous-band painted metals. Test methods. Part 17: Adherence of Pelable Films.

UNE-EN 13523-17:2005

UNE-EN 13523-20:2012

Metal-painted metal-sheet continues. Test methods. Part 20: Adherence of foams.

UNE-EN 13523-20:2005

UNE-EN 13541:2012

Glass for the construction. Safety glass. Test and classification based on explosion pressure resistance.

UNE-EN 13541:2001

UNE-EN 13617-2:2012

Gas Stations. Part 2: Safety requirements for the construction and operation of the security cuts for counting pumps and pumps.

UNE-EN 13617-2:2005

UNE-EN 13617-3:2012

Gas Stations. Part 3: Safety requirements for the construction and operation of safety valves.

UNE-EN 13617-3:2005

UNE-EN 13815:2012

Products in staff (fibrous plaster). Definitions, specifications, and test methods.

UNE-EN 13977:2012

Applications railway. Via. Security requirements for portable machines and diploris for construction and maintenance.

UNE-EN 13977:2006 + A1:2008

UNE-EN 14033-2:2009 + A1:2012

Railway Applications. Via. Machines for the construction and maintenance that travel exclusively on rails. Part 2: Technical requirements for the job.

UNE-EN 14033-2:2009

UNE-EN 14033-3:2011 + A1:2012

Railway Applications. Via. Machines for the construction and maintenance that travel exclusively on rails. Part 3: General security requirements.

UNE-EN 14033-3:2011

UNE-EN 14154-2:2005 + A2:2012

Water counters. Part 2: Installation and conditions of use.

UNE-EN 14154-2:2005 + A1:2008

UNE-EN 14154-3:2005 + A2:2012

Water counters. Part 3: Testing equipment and methods.

UNE-EN 14154-3:2005 + A1:2008

UNE-EN 14511-1:2012

Air conditioners, liquid coolers, and heat pumps with electrically powered compressor for the heating and cooling of premises. Part 1: Terms and definitions.

UNE-EN 14511-1:2008

UNE-EN 14511-2:2012

Conditioning air, liquid cooling and heat pumps with electrically operated compressor for heating and cooling of premises. Part 2: Test conditions.

UNE-EN 14511-2:2008

UNE-EN 14511-3:2012

Conditioning of air, liquid cooling and heat pumps with electrically operated compressor for heating and cooling of premises. Part 3: Test Methods.

UNE-EN 14511-3:2008

UNE-EN 14511-3:2008/AC: 2008

UNE-EN 14511-4:2012

Air conditioners, liquid coolers, and electrically powered compressor heat pumps for local heating and cooling. Part 4: Requirements.

UNE-EN 14511-4:2008

UNE-EN 14535-2:2012

Railway Applications. Brake discs for railway rolling stock. Part 2: Wheel-mounted brake discs, measures, and quality requirements.

UNE-EN 14638-3:2011/AC: 2012

Bottles for the gas transport. Refillable welded containers with a capacity not exceeding 150 litres. Part 3: welded carbon steel bottles designed using experimental methods.

UNE-EN 14653-1:2012

Manual systems for hydraulic ditching of ditches. Part 1: Product specifications.

EN 14653-1:2005

UNE-EN 14653-2:2012

Systems Hydraulic ditching manuals for ditches. Part 2: Assessment by calculation or trial.

EN 14653-2:2005

UNE-EN 14678-2:2009 + A1:2012

Equipment and Accessories for LPG. Construction and operation of LPG equipment in the automotive service stations. Part 2: Components other than the pumps and installation requirements.

UNE-EN 14678-2:2009

UNE-EN 14678-2:2009 ERRATUM: 2009

UNE-EN 14758-1:2012

Pipeline systems in plastic materials for unpressurized buried sanitation. Polypropylene with mineral modifiers (PP-MD). Part 1: Specifications for pipes, fittings, and system.

UNE-EN 14758-1:2006 + A1:2009

UNE-EN 14780:2012

Solid Biofuels. Preparing samples.

UNE-CEN/TS 14780:2008 EX

UNE-EN 14985:2012

Gruas. Cranes with rotating arrow.

UNE-EN 14985:2009

UNE-EN 15102:2008 + A1:2012

Coatings decorative for walls. Coatings in the form of rolls and panels.

UNE-EN 15217:2012

Energy Efficiency of the buildings. Methods for expressing energy efficiency and for building energy certification.

UNE-EN 15221-3:2012

Managing properties and support services. Part 3: Quality guidance in managing real estate and support services.

UNE-EN 15221-4:2012

Management of properties and support services. Part 4: Taxonomy, classification, and structures in the management of buildings and support services.

UNE-EN 15254-4:2009 + A1:2012

Extension of the application of the results obtained in the fire resistance tests. Non-bearing walls. Part 4: Built-in construction elements.

UNE-EN 15254-4:2009

UNE-EN 15411:2012

UNE-EN 15413:2012

Solid fuels retrieved. Methods for the preparation of test samples from laboratory samples.

UNE-EN 15415 -1:2012

UNE-EN 15567-1:2009 ERRATUM: 2012

Sport structures and recreational activities. Acrobatic tour in height. Part 1: Build and security requirements.

UNE-EN 15567-2:2012

Structures of sport and recreational activities. Acrobatic tour in height. Part 2: Operating requirements.

EN 15567-2:2007

UNE-EN 15590:2012

UNE-EN 15621:2012

Animal food. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after digestion under pressure by ICP-AES.

UNE-CEN/TS 15621:2008 EX

UNE-EN 15700:2012

Security of conveyor belts for winter or recreational sports activities.

Railway applications. Via. Road-rail machines and associated equipment. Part 1: Technical requirements for circulation and work.

UNE-EN 15746-1:2011

UNE-EN 15746-2:2011 + A1:2012

Railway Applications. Via. Road-rail machines and associated equipment. Part 2: General security requirements.

UNE-EN 15746-2:2011

UNE-EN 15918:2012

Cycles. Trailers for cycles. Security requirements and test methods.

UNE-EN 15942:2012

Sustainability in the construction. Environmental statements of product. Business-to-business communication format.

UNE-EN 15948:2012

Cereals. Determination of moisture content and protein content. Method by near-infrared spectroscopy on whole grains.

UNE-EN 15958:2012

Fertilizers. Water-soluble phosphorus extraction.

UNE-EN 15960:2012

Fertilizers. Extraction of total calcium, total magnesium, total sodium, and total sulfur present under the form of sulfate.

UNE-EN 15978:2012

Sustainability in construction. Assessment of the environmental performance of buildings. Calculation methods.

UNE-EN 16018:2012

Non-destructive tests. Terminology. Terms used in ultrasonic testing by multi-element with phase control (phasedarrays).

UNE-EN 16027:2012

Protection clothing. Protective gloves for football goalkeepers.

UNE-EN 16032:2012

Fertilizers. Elemental sulfur extraction and determination.

UNE-EN 16083:2012

Zaguales and oars for recreational craft. Security requirements and test methods.

UNE-EN 16135:2012

Fuels de automotive. Determination of manganese content in unleaded gasolines. A spectrometric method by atomic absorption of the flame (FAAS).

UNE-EN 16136:2012

Automotive Fuels. Determination of manganese content in unleaded gasolines. Method by optical emission spectroscopy by inductive coupling plasma (ICP OES).

UNE-EN 16159:2012

Animal food. Determination of selenium by atomic absorption spectrometry with hydride generation (HGAAS) after microwave digestion (extraction with 65% nitric acid and 30% hydrogen peroxide).

UNE-EN 16206:2012

Animal Food. Determination of arsenic by atomic absorption spectrometry with hydride generation (HGAAS) after microwave pressure digestion (extraction with 65% nitric acid and 30% hydrogen peroxide).

Low-voltage electrical cables. Rated voltage cables not exceeding 450/750 V (Uo/U). Part 1: General requirements.

UNE-EN 50525-2-11:2012

Low electric cables tension. Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-11: Cables of general use. Flexible cables with thermoplastic insulation (PVC).

UNE-EN 50525-2-12:2012

Cables Low voltage electrical power. Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-12: Cables of general use. Extensible cables with thermoplastic insulation (PVC).

UNE-EN 50525-2-21:2012

Cables Low voltage electrical power. Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-21: Cables of general use. Flexible cables with cross-linked elastomer isolation.

UNE-EN 50525-2-22:2012

Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-22: Cables of general use. High flexibility braided cables with cross-linked elastomer isolation.

UNE-EN 50525-2-31:2012

Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-31: Cables of general use. Uncoated unipolar cables with thermoplastic insulation (PVC).

UNE-EN 50525-2-41:2012

Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-41: Cables of general use. Unipolar cables with cross-linked silicone insulation.

UNE-EN 50525-2-42:2012

Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-42: Cables of general use. Uncovered unipolar cables with cross-linked EVA isolation.

UNE-EN 50525-2-51:2012

Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-51: Cables of general use. Oil-resistant control cables with thermoplastic insulation (PVC).

UNE-EN 50525-2-71:2012

Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-71: Cables of general use. oropel flat cables with thermoplastic insulation (PVC).

UNE-EN 50525-2-72:2012

Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-72: Cables of general use. Flat cables divisible with thermoplastic insulation (PVC).

UNE-EN 50525-2-81:2012

Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-81: Cables of general use. Cables for welding machines with cross-linked elastomer insulation.

UNE-EN 50525-2-82:2012

Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-82: Cables of general use. Cables for luminous garlands with cross-linked elastomer insulation.

UNE-EN 50525-2-83:2012

Rated voltage cables not exceeding 450/750 V (Uo/U). Part 2-83: Cables of general use. Multiconductor cables with cross-linked silicone isolation.

UNE-EN 50525-3-11:2012

Rated voltage cables not exceeding 450/750 V (Uo/U). Part 3-11: Cables with special properties before the fire. Flexible cables with halogen-free thermoplastic insulation and low smoke emission.

UNE-EN 50525-3-21:2012

Low voltage electrical cables. Rated voltage cables not exceeding 450/750 V (Uo/U). Part 3-21: Cables with special properties before fire. Flexible cables with halogen-free cross-linked isolation and low smoke emission.

UNE-EN 50580:2012

Security of the portable manual tools powered by electric motor. Particular requirements for spray guns.

UNE-EN 55016-4-2:2012

UNE-EN 55017:2012

Measurement methods of the deletion features of the CEM filtering passive devices.

UNE-EN 60061-1:1996/A46:2012

Caschillos and portalamparas, along with the calibers for control of the interchangeability and security. Part 1: Caskets. (IEC 60061-1:1969/A37:2006)

UNE-EN 60061-2:1996/A42:2012

Casings and Portalamparas, together with the calibers for the control of interchangeability and security. Part 2: Portalamparas.

UNE-EN 60061-3:1997/A43:2012

Casings and Portalamparas together with the calibers for the control of interchangeability and security. Part 3: Calibers.

UNE-EN 60079-35-1:2012

Explosive atmospheres. Part 35-1: helmet lamps for use in mines with a risk of grisu. General requirements. Construction and testing related to explosion risk.

UNE-EN 60300-3-16:2012

Reliability management. Part 3-16: Application Guide. Guidelines for specifying maintenance logistics services.

EN 60300-3-16:2008

UNE-EN 60335-1:2012

Appliances and analogues. Security. Part 1: General requirements.

UNE-EN 60335-2-16:2005/A2:2012

Appliances appliances and analogues. Security. Part 2-16: Particular requirements for garbage shredders.

UNE-EN 60335-2-45:2004/A2:2012

Appliances and Analog Appliances. Security. Part 2-45: Particular requirements for mobile heating tools and analog devices.

UNE-EN 60335-2-51:2005/A2:2012

Appliances and analogues. Security. Part 2-51: Particular requirements for fixed circulation pumps for heating and water distribution facilities.

UNE-EN 60335-2-66:2004/A2:2012

Appliances and analogues. Security. Part 2-66: Particular requirements for water mattress heaters.

UNE-EN 60695-6-2:2012

Asks relative to fire risks. Part 6-2: Opacity of the smoke. Summary and relevance of test methods.

UNE-EN 60695-7-2:2012

Tests on the risks of fire. Part 7-2: Toxicity of the effluents of the fire. Summary and relevance of test methods.

UNE-EN 60695-7-3:2012

Tests on the risks of fire. Part 7-3: Toxicity of the effluents of the fire. Use and interpretation of test results.

UNE-EN 60695-11-4:2012

Tests on the risks of fire. Part 11-4: Test flames. Call 50 W. Appliances and compliance testing methods.

UNE-EN 60730-2-9:2012

Automatic electric control devices for domestic and analog use. Part 2-9: Particular requirements for heat-sensitive control devices.

UNE-EN 61937-1:2007/A1:2012

Digital Audio. Interface for non-linear PCM encoded audio bit streams by applying IEC 60958. Part 1: Generalities.

UNE-EN 62271-103:2012

High voltage appliances. Part 103: Switches for assigned voltages greater than 1kV and less than or equal to 52 kV.

UNE-EN ISO 945-1:2012

Designation of the microstructure of iron foundry. Part 1: Classification of graphite by visual analysis. (ISO 945-1:2008)

UNE-EN ISO 945-1:2009

UNE-EN ISO 945-1:2009/AC: 2010

UNE-EN ISO 1135-4:2012

transfusion equipment for medical use. Part 4: Transfusion equipment for single use. (ISO 1135-4:2012)

UNE-EN ISO 1135-4:2011

UNE-EN ISO 1518-2:2012

Paintings and varnishes. Determination of scratch resistance. Part 2: Variable load method. (ISO 1518-2:2011)

UNE-EN ISO 12137-2:2007

UNE-EN ISO 2431:2012

Paintings and varnishes. Determination of flow time using flow cups. (ISO 2431:2011)

UNE-EN ISO 2431:1996

UNE-EN ISO 3961:2012

Animal Oils and Fats and vegetable. Determination of the iodine index. (ISO 3961:2009)

UNE-EN ISO 3961:2000

UNE-EN ISO 6158:2012

Metal and other coatings inorganic coatings. Electrolytic chromium coatings for industrial purposes. (ISO 6158:2011)

UNE-EN ISO 6158:2005

UNE-EN ISO 6887-4:2004/A1:2012

Microbiology of the food for human and animal consumption. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, fish and fishery products. (ISO 6887-4:2003/Amd 1:2011).

UNE-EN ISO 7783:2012

Paintings and varnishes. Determination of water vapor permeability. Capsule method. (ISO 7783:2011)

UNE-EN ISO 7783-2:1999

UNE-EN ISO 7783-1:2000

UNE-EN ISO 9693-1:2012

Dentistry. Compatibility tests. Part 1: Metal-ceramic systems. (ISO 9693-1:2012)

UNE-EN ISO 9693:2001

UNE-EN ISO 10456:2012

Materials and products for the building. Hygrothermic properties. Tabulated values of design and procedures for the determination of the declared and design thermal values. (ISO 10456:2007)

UNE-EN ISO 10456:2001

UNE-EN ISO 10545-4:2012

Ceramic Tiles. Part 4: Determination of the resistance to bending and the force of breakage. (ISO 10545-4:2004).

UNE-EN ISO 10545-4:1997

UNE-EN ISO 10545-6:2012

Ceramic Tiles. Part 6: Determination of the deep abrasion resistance of the unglazed tiles. (ISO 10545-6:2010).

UNE-EN ISO 10545-6:1998

UNE-EN ISO 10863:2012

Non-destructive testing of welds. Ultrasound test. Use of the flight time diffraction (TOFD) technique. (ISO 10863:2011)

UNE-EN ISO 11127-1:2012

Preparing steel substrates prior to the application of paints and related products. Test methods for non-metallic abrasive materials intended for the preparation of surfaces by squirt. Part 1: Taking of samples. (ISO 11127-1:2011).

UNE-EN ISO 11127-1:1998

UNE-EN ISO 11127-2:2012

Preparing Steel substrates prior to the application of paints and related products. Test methods for non-metallic abrasive materials intended for the preparation of surfaces by squirt. Part 2: Granulometric analysis. (ISO 11127-2:2011).

UNE-EN ISO 11127-2:1998

UNE-EN ISO 11127-3:2012

Preparing Steel substrates prior to the application of paints and related products. Test methods for non-metallic abrasive materials intended for the preparation of surfaces by squirt. Part 3: Determination of the apparent density. (ISO 11127-3:2011).

UNE-EN ISO 11127-3:1998

UNE-EN ISO 11127-4:2012

Preparing Steel substrates prior to the application of paints and related products. Test methods for non-metallic abrasive materials intended for the preparation of surfaces by squirt. Part 4: Assessment of hardness by means of a glass plate test. (ISO 11127-4:2011).

UNE-EN ISO 11127-4:1998

UNE-EN ISO 11127-5:2012

Preparing Steel substrates prior to the application of paints and related products. Test methods for non-metallic abrasive materials intended for the preparation of surfaces by squirt. Part 5: Determination of moisture. (ISO 11127-5:2011).

UNE-EN ISO 11127-5:1998

UNE-EN ISO 11127-6:2012

Preparing Steel substrates prior to the application of paints and related products. Test methods for non-metallic abrasive materials intended for the preparation of surfaces by squirt. Part 6: Determination of water-soluble contaminants by conductimetry. (ISO 11127-6:2011).

UNE-EN ISO 11127-6:1998

UNE-EN ISO 11127-7:2012

Preparing Steel substrates prior to the application of paints and related products. Test methods for non-metallic abrasive materials intended for the preparation of surfaces by squirt. Part 7: Determination of water-soluble chlorides. (ISO 11127-7:2011).

UNE-EN ISO 11127-7:1998

UNE-EN ISO 11681-1:2012

Forestry machinery. Safety requirements and tests of portable chain saws. Part 1: Chain saws for forest use. (ISO 11681-1:2011)

UNE-EN ISO 11681-1:2009

UNE-EN ISO 11681-2:2012

Forestry machinery. Safety requirements and tests of portable chain saws. Part 2: Chain saws for tree pruning. (ISO 11681-2-2011)

UNE-EN ISO 11681-2:2009

UNE-EN ISO 11699-1:2012

Non-destructive testing. Film for industrial radiography. Part 1: Classification of film systems for industrial radiography. (ISO 11699-1:2008)

UNE-EN 584-1:2007

UNE-EN ISO 11699-2:2012

Non-destructive testing. Film for industrial radiography. Part 2: Control of the processing of films by reference values. (ISO 11699-2:1998)

UNE-EN 584-2:1997

UNE-EN ISO 11746:2012

Rice. Determination of the biometric characteristics of the grains. (ISO 11746:2012)

UNE-EN ISO 11806-1:2012

Agricultural and forestry machinery. Safety requirements and tests for motorised portable grass debrooders and lawnmowers. Part 1: Machines equipped with integrated internal combustion engine. (ISO 11806-1:2011)

UNE-EN ISO 11806:2008

UNE-EN ISO 11806-2:2012

Agricultural Machinery and forest. Safety requirements and tests for motorised portable grass debrooders and lawnmowers. Part 2: Machines with motor source carried to the back. (ISO 11806-2:2011)

UNE-EN ISO 12100:2012

Machine Security. General principles for design. Risk assessment and risk reduction. (ISO 12100:2010)

UNE-EN ISO 13229:2012

Materials pipeline systems Thermoplastics for non-pressure applications. Non-plasticised poly (vinyl chloride) tubes and fittings (PVC-U). Determination of the viscosity index and the calculation of the value-K. (ISO 13229:2010)

UNE-EN 922:1995

UNE-EN ISO 13260:2012

Pipeline Systems in Thermoplastic materials for sanitation and evacuation buried without pressure. Test method for resistance to the combination of temperature cycle and external load. (ISO 13260:2010)

UNE-EN 1437:2003

UNE-EN ISO 13485:2012

Healthcare products. Quality management systems. Requirements for regulatory purposes. (ISO 13485:2003)

UNE-EN ISO 13485:2004

UNE-EN ISO 13485:2004 ERRATUM: 2009

UNE-EN ISO 14088:2012

Leather. Chemical tests. Quantitative analysis of the agents tanning by the filter method. (ISO 14088:2012)

UNE-EN ISO 14271:2012

Soldeo by resistance. Test of hardness Vickers in welds by resistance points, by protrusions and by seams (reduced load and microhardness). (ISO 14271:2011)

UNE-EN ISO 14271:2002

UNE-EN ISO 15614-1:2005/A2:2012

Specification and qualification of the welding procedures for metal materials. Test for welding procedure. Part 1: Arco welding and steels gas and nickel arc welding and its alloys. Modification 2. (ISO 15614-1:2004/Amd 2:2012)

UNE-EN ISO 16140:2003/A1:2012

Microbiology of food for human and animal consumption. Alternative method validation protocol. Amendment 1. (ISO 16140 :2003/AMD 1:2011)

UNE-EN ISO 19110:2010/A1:2012

Geographical information. Methodology for the cataloging of phenomena. Modification 1. (ISO 19110 :2005/AMD 1:2011)

UNE-EN ISO 24011:2012

Coatings resilient soil. Specification for smooth and decorative linoleum. (ISO 24011:2009)

UNE-EN 548:2011

UNE-EN ISO 24345:2012

Resilient floor coverings. Determination of the resistance to take off. (ISO 24345:2006)

UNE-EN 431:1995

UNE-EN ISO 26304:2012

Consumables for welding. Wires, tubular wires, and alambre-flux combinations for the submerged arc welding of high-strength steels. Classification. (ISO 26304:2011)

UNE-EN ISO 26304:2010

-ISO 1268-1:2012

Fiber-reinforced plastics. Methods of production of test plates. Part 1: General conditions.

UNE 53276:1981

-ISO 1268-2:2012

Plastics reinforced with fibre. Methods of production of test plates. Part 2: Contact and injection molding.

UNE 53276:1981

-ISO 1268-3:2012

Plastics reinforced with fibre. Methods of production of test plates. Part 3: Wet compression molding.

UNE 53276:1981

-ISO 1268-4:2012

Plastics reinforced with fibre. Methods of production of test plates. Part 4: Molded prepregs.

UNE 53276:1981

-ISO 1268-5:2012

Plastics reinforced with fibre. Methods of production of test plates. Part 5: Molding the filament.

UNE 53276:1981

-ISO 1268-6:2012

Methods of production of test plates. Part 6: Extrusion molding.

UNE 53276:1981

-ISO 1268-7:2012

Plastics reinforced with fibre. Methods of production of test plates. Part 7: Molding by resin transfer.

UNE 53276:1981

-ISO 1268-8:2012

Plastics reinforced with fibre. Methods of production of test plates. Part 8: SMC and BMC compression molding.

UNE 53276:1981

-ISO 1268-9:2012

Plastics reinforced with fibre. Methods of production of test plates. Part 9: GMT/STC Molding.

UNE 53276:1981

-ISO 1268-10:2012

Plastics reinforced with fibre. Methods of production of test plates. Part 10: BMC injection molding and other long fiber molding compounds. General principles and molding for multipurpose specimens.

UNE 53276:1981

-ISO 1268-11:2012

Methods of production of test plates. Part 11: BMC injection molding and other long fiber molding compounds. Small plates.

UNE 53276:1981