Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December ("Official State Gazette", No. 32, of 6 February 1996) and having regard to the standards developed by the European standards bodies, CEN, CENELEC, ETSI and whose national transposition corresponds to the Spanish Association for Standardisation and Certification designated by Order of Ministry of Industry and Energy of 26 February 1986, in accordance with Royal Decree 1614/1985 of 1 August 1985, and recognized for this purpose by the additional provision of Royal Decree 2200/1995 of 28 December 1995.
This Directorate General has decided to publish in the "Official State Gazette" the list of European standards that have been ratified as Spanish rules during the month of November 2015, identified by its title and code numerical, indicating their date of availability, which are listed as an annex to this resolution.
Madrid, 3 December 2015. -Director General Industry and Small and Medium Enterprises, Victor Audera López.
ANNEX
Ratification of European rules. November 2015
| Title | F. Availb. | Anula | |
|---|---|---|---|
|
CEN ISO/TS 12025:2015 | Nanomaterials. Quantification of the release of nano-objects from powders by aerosol generation (ISO/TS 12025:2012) | 2015 -05-20 |
|
|
CEN ISO/TS 14907-1:2015 | Electronic Peage. Test procedures for on-board equipment and fixed equipment. Part 1: Description of the test procedures (ISO/TS 14907-1:2015) | 2015 -09-23 | CEN ISO/TS 14907-1:2010; CEN ISO/TS 14907-1:2010/AC: 2010 |
|
CEN ISO/TS 17200:2015 | Nanotechnology. Nanoparticles in the form of powder. Features and measures (ISO/TS 17200:2013) | 2015 -05-20 |
|
| CEN ISO/TS 18867:2015 | Microbiology of the food chain. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Detection of Yersinia enterocolitica and Yersinia pathogenic pseudotuberculosis (ISO/TS 18867:2015) | 2015 -10-14 |
|
| CEN ISO/TS 29001:2011 | Oil, petrochemical, and natural gas industries. System of management of the specific quality of the sector. Requirements for product and service provider organizations (ISO/DTS 29001:2010) | 2011-02-09 |
|
| CEN ISO/TS 80004-6:2015 | Nanotechnology. Vocabulary. Part 6: Characterization of nano-objects (ISO/TS 80004-6:2013) | 2015 -05-20 |
|
|
CEN ISO/TS 80004-8:2015 | Nanotechnologies. Vocabulary. Part 8: Nanofabrication Processes (ISO/TS 80004-8:2013) | 2015 -05-20 |
|
|
CEN/TR 1749:2014 | European scheme for the classification of appliances using gaseous fuels according to the form of evacuation of combustion products (types) | 2014-06-25 | UNE-CEN/TR 1749:2012 IN |
|
CEN/TR 13737-2:2014 | Gas Infrastructure. Implementation guide for functional standards prepared by CEN/TC 234. Part 2: National pages relating to CEN/TC 234 standards | 2014-12-17 | UNE-CR 13737:2003 |
| CEN/TS 15119-2:2012 | Durability of wood and wood-derived products. Determination of emissions into the environment of wood treated with protective products. Part 2: Articles of wood exposed in classes of use 4 and 5 (in contact with the soil, with fresh water or with seawater). Lab method. | 2012-10-03 | UNE-CEN/TS 15119-2:2008 EX |
|
943-1:2015 |
Protection clothing against chemicals, liquids and soda, including liquid aerosols and solid particles. Part 1: Performance requirements for chemical, ventilated and non-ventilated, gas-tight (Type 1) and non-gas-tight (Type 2) suits. | 2015 -08-05 | UNE-EN 943-1:2003; UNE-EN 943-1:2003/AC: 2006 |
|
4165-001:2015 | Aerospace. Electric, rectangular, modular connectors. Use temperature 175 ° C continues. Part 001: Technical Specification | 2015 -10-14 | EN 4165-001:2007 |
|
4710-01:2015 | Aerospace. Quick release fixing systems for non-structural applications. Part 01: Technical Specification. | 2015 -10-07 |
|
|
4710-02:2015 |
Aerospace material. Quick release fixing systems for non-structural applications. Part 02: Combination of spring clamp and pins | 2015 -10-07 |
|
|
4710-03:2015 | Aerospace. Quick release fixing systems for non-structural applications. Part 03: Spring Pinza | 2015 -10-07 |
|
|
4710-04:2015 | Aerospace Material. Quick release fixing systems for non-structural applications. Part 04: Spring Pinza. One-way tolerance compensation | 2015 -10-07 |
|
|
4710-05:2015 |
Aerospace. Quick release fixing systems for non-structural applications. Part 05: Spring Pinza. Bidirectional tolerance compensation | 2015 -10-07 |
|
|
4710-06:2015 |
Aerospace. Quick release fixing systems for non-structural applications. Part 06: Lock and Quick Release Paster | 2015 -10-07 |
|
|
4710-07:2015 | Aerospace. Quick release fixing systems for non-structural applications. Part 07: Containment Arandela | 2015 -10-07 |
|
|
16523-1:2015 |
Determination of the resistance of materials to the permeability of chemicals. Part 1: Permeability by a liquid chemical in continuous contact conditions. | 2015 -02-18 | UNE-EN 374-3:2004; UNE-EN 374-3:2004/AC: 2006 |
|
16523-2:2015 | Determining the resistance of materials to the permeability of chemicals. Part 2: Permeability by a gaseous chemical in continuous contact conditions. | 2015 -02-18 |
|
| EN 16602-70-55:2015 | Securing space products. Microbiological examination of flight materials and clean rooms. | 2015 -09-23 |
|
| EN 16602-70-56:2015 | Securing space products. Gaseous phase reduction of microbial load of flight materials | 2015 -09-23 |
|
| EN 16602-70-57:2015 | Securing spatial products. Dry heat reduction of microbial load of flight materials | 2015 -09-23 |
|
| EN 16602-70-58:2015 | Securing space products. Control of the microbial load of clean rooms. | 2015 -09-23 |
|
|
16603-31-02:2015 | Spatial Engineering. Two-phase heat transfer equipment | 2015 -09-23 |
|
|
16603-60-30:2015 | Spatial engineering. Requirements for satellite altitude and orbit control systems (AOCS) | 2015 -09-23 |
|
| 60086-1:2015 | Electrical Pires. Part 1: Generalities. | 2015 -10-09 |
|
|
60143-1:2015 | Serial Condensers to be installed in networks. Part 1: Generalities | 2015 -10-16 |
|
|
60143-3:2015 | Serial Condensers for Power Systems. Part 3: Internal fuses | 2015 -09-18 |
|
|
60384-20:2015 | Fixed Condensers for use in electronic equipment. Part 20: Intermediate specification. Continuous stream capacitors integrated in dielectric with fixed metallized polyphenylene sulfide film. | 2015 -10-16 |
|
|
60384-24:2015 | Fixed condensers for use in electronic equipment. Part 24: Intermediate specification: Fixed condeners, tantalum electrolytics, surface mounted with solid electrolyte of conductive polymer | 2015 -10-16 |
|
| Fixed denser for use in electronic equipment. Part 25: Intermediate specification. Fixed capacitors, aluminium electrolytics, surface mounted with solid electrolyte of conductive polymer | 2015 -10-16 |
|
|
|
60512-29-100:2015 | Connectors for Electronic Equipment. Tests and measurements. Part 29-100: Signal integrity tests up to 500 MHz on M12 type connectors. Tests 29a to 29g | 2015 -09-18 |
|
|
60601-1-2:2015 | Electromedical Equipment. Part 1-2: General requirements for basic safety and essential operating characteristics. Collateral standard: Electromagnetic disturbances. Requirements and essays. | 2015 -09-18 |
|
|
60601-2-33:2010/A2:2015 |
Electromedical equipment. Part 2-33: Particular requirements for the basic safety and essential functioning characteristics of magnetic resonance imaging equipment for medical diagnosis | 2015 -09-18 |
|
|
60601-2-45:2011/A1:2015 | Electromedical Equipment. Part 2-45: General requirements for the basic safety and essential functioning of the X-ray mammography and stereotaxia mammography devices. | 2015 -09-18 |
|
|
60633:1999/A2:2015 | Terminology for High-Voltage Stream Transmission (HVDC) | 2015 -09-25 |
|
|
60700-1:2015 | thyristor valves for power transmission in high voltage continuous current (CCAT). Part 1: Electrical Trials | 2015 -09-25 |
|
|
60793-2-30:2015 | Optical Fiber. Part 2-30: Product specification. Intermediate specification for category A3 multimode fibers | 2015 -10-16 |
|
|
61010-2-040:2015 | Safety requirements for measurement, control, and laboratory electrical equipment. Part 2-40: Particular requirements for sterilizers and for washing and disinfection equipment used for medical material treatments. | 2015 -09-11 |
|
|
61169-52:2015 | Radio Frequency Connectors. Part 52: Intermediate specification for MMMCX RF coaxial connector strings | 2015 -10-02 |
|
| EN 61300-3-35:2015 | Optical fibre interconnect devices and passive components. Basic tests and measurement procedures. Part 3-35: Inspections and measures. Visual inspection of fiber optic transceivers and connectors | 2015 -10-16 |
|
|
61340-4-6:2015 | Electrostatic. Part 4-6: Standard test methods for specific applications. Munequeras | 2015 -09-18 |
|
| EN 61784-5-4:2012/A1:2015 | Industrial Communication Networks. Profiles. Part 5-4: Installing fieldbus. Installation profiles for CPF 4 | 2015 -09-25 |
|
|
61784-5-10:2012/A1:2015 | Industrial communication networks. Profiles. Part 5-10: Installation of fieldbus. Installation profiles for CPF 10. | 2015 -09-25 |
|
|
61784-5-12:2012/A1:2015 | Industrial communication networks. Profiles. Part 5-12: Installation of fieldbus. Installation profiles for CPF 12. | 2015 -09-25 |
|
|
61784-5-15:2012/A1:2015 | Industrial communication networks. Profiles. Part 5-15: Installation of fieldbus. Installation profiles for CPF 15 | 2015 -09-25 |
|
|
61800-2:2015 |
Variable rate power electric drives. Part 2: General requirements. Sizing specifications for alternating current and low voltage variable speed power drive systems | 2015 -09-25 |
|
|
61804-3:2015 | Functional blocks (FB) for process control and device description language electronic (EDDL). Part 3: EDDL Semantics and Syntax | 2015 -09-18 |
|
|
61804-5:2015 |
Functional Blocks (FB) for process control and electronic device description language (EDDL). Part 5: EDDL Integrated Library | 2015 -09-18 |
|
|
62271-3:2015 |
High voltage parking. Part 3: Digital interfaces based on Standard IEC 61850. | 2015 -05-01 |
|
|
62753:2015 | Digital terrestrial television receivers for the DTMB system | 2015 -10-02 |
|
|
ISO 11073-30200:2005/A1:2015 | Health Informatics. Communications with point-of-care sanitary devices. Part 30200: Transport profile. Cable connection. Modification 1 (ISO/IEEE 11073-30200:2004/Amd 1:2015) | 2015 -09-23 |
|
|
ISO 11611:2015 | Protection clothing used during welding and related processes. (ISO 11611:2015) | 2015 -07-29 |
EN ISO 11612:2015 |
EN ISO 11612:2015 | The_table_table_izq"> Protection Append. Protective clothing against heat and flame. Minimum performance requirements (ISO 11612:2015) | 2015 -07-08 | UNE-EN ISO 11612:2010 |
|
ISO 12311:2013 | Individual protection equipment. Test methods for sunglasses and associated equipment (ISO 12311:2013, corrected version 2014-08-15) | 2013-08-07 |
|
| EN ISO 12312-1:2013/A1:2015 | Eye and Face Protection. Sunglasses and related items. Part 1: Sunglasses for general use (ISO 12312-1:2013/Amd 1:2015) | 2015 -09-23 |
|
|
ISO 13356:2015 | Surgical implants. Ceramic materials based on tetragonal zirconium stabilized with yttrium (Y-TZP) (ISO 13356:2015) | 2015 -09-30 | EN ISO 13356:2013 |
|
ISO 14116:2015 | Protection clothing. Protection against the flame. Clothing, materials and set of materials with limited flame propagation (ISO 14116:2015) | 2015 -07-29 | UNE-EN ISO 14116:2008 |
| EN ISO 14253-5:2015 | Geometric product specification (GPS). Inspection by measuring parts and measuring equipment. Part 5: Uncertainty in the testing of measuring indication instruments (ISO 14253-5:2015) | 2015 -09-16 |
|
|
EN ISO 15156-1:2015 | Oil and natural gas industries. Materials for use in the presence of H2S in the production of petroleum products and natural gas. Part 1: General principles for the selection of pyrolysis-resistant materials (ISO 15156-1:2015) | 2015 -09-16 | EN ISO 15156-1:2009 |
|
ISO 15156-2:2015 | Oil and natural gas industries. Materials for use in the presence of H2S in the production of oil and natural gas. Part 2: Carbon Azeros and Low-alloy Aceros resistant to pyrolysis and use of smelters (ISO 15156-2:2015) | 2015 -09-16 | EN ISO 15156-2:2009 |
|
ISO 15156-3:2015 | Oil and natural gas industries. Materials for use in the presence of H2S in the production of oil and natural gas. Part 3: Corrosion Resistant Alloys (ARCs) and other pyrolysis-resistant alloys (ISO 15156-3:2015) | 2015 -09-16 | EN ISO 15156-3:2009 |
|
ISO 80601-2-72:2015 | Electromedical Equipment. Part 2-7: Particular requirements for the basic safety and essential functioning of home-use environmental respirators for patients with ventilator dependency (ISO 80601-2-72:2015) | 2015 -09-23 |
|
