Cabinet of Ministers Regulations No. 370 in Riga, 14 august 2001 (pr. No 38 6) provisions for the Latvian et seq of the LBN 202-01 "Construction and design" Issued in accordance with article 2 of the law on construction of the fourth part 1. approve the Latvian et seq of the LBN 202-01 "Construction and design".
2. Construction of a validly accepted up to October 31, 2001, and the technical solutions which meet the relevant time the applicable regulatory requirements, construction of processing according to the Latvian et seq of the LBN 201-01 "development of Construction and design" requirements is not mandatory.
3. The entry into force of the provisions by 1 November 2001.
 
Prime Minister a. Smith of environmental protection and regional development Minister v. Makarova rules enter into force by 1 November 2001 at the approved by the Cabinet of Ministers of 14 august 2001, regulations No 370 Latvian et seq of the LBN 201-01 "Construction and design" i. General questions 1 et seq of the construction plan requires text content and drawing style.
2. Et SEQ applies to any building project design stage of the project, or technical design stage, including the shipbuilding projects and detailed fixations drawings, except construction intentions, other meta pre-project graphical or text materials, as well as the demo.
3. development of a construction, not less than three copies: 3.1.-the first copy of the original construction plan-keep the designer to the law "on the archives" in the order;
3.2. second copy-copy of the construction with the consent of the original lodge in būvvald-designer storage archive;
3.3. third copy-construction with a copy of the reconciliation of the original-the designer passes the client.
4. the drawings used for drawing up the design and other projects not included in the calculations. This material shall be kept in the designer to the law "on the archives ' established and presented to the customer or inspecting the construction of the State and the municipal authorities at their request.
5. the body issuing the technical or special rules for drawing up the projects, you can specify which parts of the construction drawings (in one instance) after acceptance must submit a construction storage in the archive.
6. Construction contains also the text pages, documents and drawings, 5.1.1.the by binding or in one or more books (volume) depending on the part or section number.
II. Construction of the text content of the page 7. text page contents building project the necessary information and explanations on the building site, a construction solutions architect, client, time, and location.
8. Construction of text pages is as follows: 8.1 construction cover sheet;
8.2. the composition of the construction sites;
8.3. the table of contents (volume projects contained in the text and drawings of a table of contents with page references);
8.4. the civil design of the necessary documents, including engineering studies and reports and technical opinions;
8.5. the explanatory memorandum.
9. Cover page indicating the following information: 9.1 the designer name, registration number and licence business register number-legal persons or the designer's name and certificate number – natural persons;
9.2. the Subscriber's name, registration number and registered in the commercial register address-legal persons or name, surname and address-natural persons;
9.3. the order number;
9.4. the name and address of the site;
9.5. civil design stage;
9.6. construction plan or section name;
9.7. the volume number and the title of the part or mark;
9.8. the persons responsible for the establishment of the designer's name, surname, signature and seal, if the designer is a legal person;
9.9. a construction manager's name and signature;
9.10. construction of the author's name and signature;
9.11. the preparation of the construction site and year.
10. Construction of the page displays the following information: 10.1 and section titles;
10.2. the brand and the serial numbers of the relevant projects to the volume.
11. Construction part or section and volume table of contents page with page references added after construction of the cover page and pages in each volume.
12. Construction of the explanatory memorandum contains general information about the site, architectural solutions and inženierrisinājum in General, the design of the construction the main technical indicators, as well as other construction of characteristic data in accordance with the LBN 006-00 "essential requirements construction".
13. Construction part or section of the relevant explanatory memorandum part or section contains information about the individual projects or the parts of the solutions contained in the section.
III. Construction drawing design of Construction drawings 14 develop to a certain size drawing pages in accordance with the standard EN ISO 5457:1999 EN "production of technical documentation. The drawing page size and layout ".
15. If the contract contains no specific civil design, construction drawings comply with this annex 1 et seq of the standard requirements.
16. the scale of the drawings shall be adopted in accordance with the standard ISO 5455:1979 technical drawings ". Scale ".
17. the graphical symbols shall be adopted in accordance with the standard EN ISO 128-23:1999 technical drawings ". General principles the diagram-part 23: lines on construction drawings ".
18. Construction parts or drawings entered in the section of the General page which includes: 18.1 the parts or drawings section list and their marks;
18.2. the used and a list of attached documents;
18.3. the construction construction required a list of technical information-signs, way;
18.4. the instructions (can be combined with an explanatory article) and not the standard designation;
18.5. construction part or section of the driver attestation under the Cabinet of Ministers on 1 April 1997 of Regulation No 112 of the "General provisions", paragraph 67.
19. The drawing page in the lower-right corner of the machine the rakstlaukum specifying the following information: the name of the designer-19.1. legal persons or name and address-natural persons;
19.2. site name;
19.3. Drawing the page name or content;
19.4. the order number;
19.5. the civil design stage;
12.2. Drawing by mark and number;
19.7. the total number of pages in the section, only to the General page;
19.8. scale;
12.4. a construction or under the Manager's name, signature, date;
19.10. page technical developer's name, signature, date;
19.11. the registration number of the archive.
20. Reuse drawings of equipment rakstlaukum indicating the following information: 20.1. order number;
20.2. the page referrer last name, signature and date;
20.3. part or section leader's name, signature and date;
20.4. Drawing by mark and number;
20.5. the registration number of the archive.
21. Civil design stage, as well as the construction of a separate part, section, work or drawing names shortened, with a specific drawing. Drawings by mark labels specified in this annex 2 et seq.
22. the specialized construction drawings contained in this et seq-brand labels are determined by the Ministry, which is under the supervision of specialized construction.
The protection of the environment and local attīstībasministr v. Makarov 1. Annex to the Latvian et seq LBN 201-01 "Construction and design" (approved by Cabinet of Ministers of 14 august 2001, regulations No 370) a construction drawing design standards applicable to list no PO box standard cipher standard name EN ISO 128 1 2 3 1.-20:1996 technical drawings. General principles the diagram-part 20: basic lines 2. EN ISO 128-20:1999 technical drawings. General principles the diagram-part 22: leading the line and the main terms of the indications and uses LVS EN ISO 3 4588-0:1997 production technical documentation. Article-part 0: General requirements EN ISO 4 LV 3323-5:1997 production technical documentation. Article-part 5: Latin CAD article, numbers and signs 5. EN ISO 128-20:1997 technical drawings. General principles the diagram-part 21: preparation of CAD systems Line 6. Lvs EN ISO 4511:1999 the construction drawings. Concrete reinforcing simplified performance 7. Lvs EN ISO 4066:1999 the construction drawings. Scale determination 8. EN ISO 4067-1:2000 drawings. Installation-part 1: graphical symbols for plumbing, heating and ventilation of the LVS EN ISO 9-1:1998 4157 construction drawings. Legend-part 1: buildings and parts of buildings Space names and numbering 10. Lvs EN ISO 4157-2:1998 construction drawings. Legend-part 2:11. Lvs EN ISO 4157-3:1998 construction drawings. Legend-part 3: space legend 12. EN EN ISO 4172:1996 technical drawings--construction drawings. Drawings of industrially produced parts Assembly 13. EN EN ISO 5261:1999 technical drawings. Beams and profilsekcij simplified scheme 14. Lvs EN ISO 5456-1:1999 technical drawings. Projection methods-Part 1: synopsis 15. Lvs EN ISO 5456-2:1999 technical drawings. Projection methods-Part 2: orthographic scheme 16. Lvs EN ISO 5456-3:1999 technical drawings. Projection methods-Part 3:17 the scheme Aksiometrisk. EN ISO 5456-4:1996 technical drawings. Projection methods--Part 4: Central projection 18. Lvs EN ISO 5845-1:1999

Technical drawings. Assembly of the components and their savienojumuvienkāršot scheme-part 1: General principles 19. Lvs EN ISO 6284:1999 the construction drawings. Instructions for the limit tolerance 20. EN EN 60617-12:1996 Elektroshēm graphical symbols-part 8: measuring instruments, lamps and signalling devices 21. EN EN 60617-12:1996 Elektroshēm graphical symbols-part 11: Architectural and topographical plans and installation chart 22. Lvs EN ISO 6411:1997 technical drawings. The Centre facilitated the scheme open 23. EN EN ISO 6412-3:1996 technical drawings. A simplified diagram of the pipelines-part 3: ventilation and drainage details 24 LVS EN ISO 6428:1999 technical drawings. Requirements for mikrokopēšan 25. EN ISO 7296-2:1996 cranes. Graphical symbols-part 2: mobile cranes 26. EN EN ISO 7437:1996 technical drawings--construction drawings. General noteikumirūpniecisk in the production of components for drawings 27. Lvs EN ISO 7518:1999 technical drawings--construction drawings. Simplified building demolition and reconstruction display 28. Lvs EN ISO 7519:1996 technical drawings--construction drawings. General layout drawings and drawings in General 29. Lvs EN ISO 8560:1999 technical drawings--construction drawings. Modular size, lines and grid 30. Lvs EN ISO 9431:1999 the construction drawings. Drawing text and spatial disposition of title 31. EN ISO 10628:1997 production company of technological equipment. 32. The General rules for LVS EN ISO 11091:1999 the construction drawings. Landscape drawing practice 33. EN ISO 13567-1:1998 technical documentation. CAD and līmeņunosaukum – part 1: Overview and principles 34. EN ISO 13567-2:1998 technical documentation. CAD and level names-part 2: building on the concepts used in the documentation and code for sorting 35. EN ISO 14985:1999 technical drawings prints. Control data structure description 36. EN 22553:1994 EN welded and brazed connections. Symbolic representation on drawings 37. EN EN 60617-12:1996 Elektroshēm graphical symbols-part 3: leaders and joining the environmental and regional attīstībasministr v. Makarova 2. Annex to the Latvian et seq LBN 201-01 "Construction and design" (approved by Cabinet of Ministers of 14 august 2001, regulations No 370) a construction drawing of the mark no Mark notes p.k. name 1 2 3 4 1. General Part 1 ti Topographical research. 2. Geotechnical survey» 3. tis technical exploratory opinion existing buildings 4. Vas Visual inspection in finding existing buildings 5. ur
Uzmērījum drawings of existing buildings of 6 FF Fotofiksācij existing buildings 7. Historical Research via existing buildings 8. AM architectural artistic exploration in existing buildings 9. AA landscape analysis of landscape projects 2. Architecture Part 10. TS section of the territory 11. Construction master plan 12. ΜPA with architectural solutions 13. ard architectural solutions, detailed equipment disposition 14 ie public (public) 15 building projects in the Interior part of 16 Inženierrisinājum 3. If amount is constructions CC small You can combine the BOM, KK, DZK 17. Reinforced concrete structure 18. dzk DZKD reinforced concrete design, advanced metal design 19 mk 20. Metal construction of mkd details kk 21 wooden structures 22. Wooden structures, kkd advanced 23. pk plastic construction 24. avk heating, ventilation and air conditioning Also aukstumapgād, pretdūm protection 25. Ww water supply and sewerage networks, Internal gas supply 26 ga Internal networks 27. sm Siltummehānik boilers 28. el, equipment, electricity supply networks 29 vs Internal Vājstrāv system communication and alarm notification system for centralised 30. Fire automation system UAS automatic fire-fighting systems of the automatic fire alarm system 31. Management and automation of the vas System 32. Ww the water supply and sewerage, external networks 33. dt drainage networks in 34. lk a rainwater sewerage network in gas supply 35. gate, external networks 36. sat, heating 37. the external networks to power supplies, external el networks 38. vst Vājstrāv, external networks 39. Environmental protection measures may be 4. Technological part 40. tn 5. Technological part economic, part 41. is equipment, construction and material specifications summary 42. ba works volume list 43. organisation of project Work Dop 44. Dvp DVP works project can be included in the composition of construction by special order, but the designer in their development project "build-build" case 45. t cost calculation estimates 6. other terms 46. sp sketch project 47. tp technical 48. Dr. detailed project working drawings of environmental protection and regional attīstībasministr v. Makarova in the