Amendments To The Cabinet Of Ministers Of 30 May 2000, No. 186 Of The Rules "rules For The Machines"

Original Language Title: Grozījumi Ministru kabineta 2000.gada 30.maija noteikumos Nr.186 "Noteikumi par mašīnu drošību"

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now

Read the untranslated law here:

Cabinet of Ministers Regulations No. 383 in Riga 2004 (April 22. Nr. 24) 17 amendments to the Cabinet of Ministers of 30 May 2000, the Regulation No 186 "rules for the machines ' Issued in accordance with the law" on conformity assessment "article 7 1. make Cabinet 30 May 2000 by Regulation No 186" rules on machines "(Latvian journal, 2000, 201./; 2002, 111 no; 2003, 114 no) the following amendments: 1. replace the text, the words" authorized institution "(fold) with the words" notified body "(fold);
1.2. make paragraph 5 by the following: "5. The Ministry of economy in cooperation with the relevant technical standards Committee recommends limited liability company" Latvian standards "Adaptive standards of the European Union.";
1.3. the deletion of paragraph 6, the words "non-profit organization";
1.4. make 7. the introductory paragraph by the following: "7. Accredited conformity assessment bodies, which evaluates machinery or safety components and of which the accreditation is published in the newspaper" Latvijas communication journal "(notified body) shall comply with the following requirements: ';
1.5. to replace paragraph 7.7, the words "authorized" by the words "entitled";
1.6. to supplement the rules with 15.1, 15.2 and 15.3 points as follows: "15.1 If market surveillance authorities to make sure that the machines that are marked with the CE marking, or security components that have a declaration of conformity and they are used according to intended purpose does not comply with the requirements of this regulation, market surveillance authorities have the right to take appropriate measures to withdraw such machinery or safety components from the market and to prohibit the placing on the market.
15.2 the market surveillance authorities shall take the following measures: 15.21. If in doubt about the conformity of the machinery with the essential requirements or the requirements of the applicable standard for standard use, correctness or adequacy of standards, a random check of the machine and organised according to accredited bodies the results of the inspection, prepare an opinion on the conformity of the machinery with the essential requirements;
15.22. reported to the Ministry of Economy for non-compliant machine detection and measures taken by the Administration, if found appropriate, which may be considered systematically observed error of machine construction (construction or manufacturing). The message added that rule 15.2 1. accredited bodies referred to in the test results, findings and the effects of non-compliance assessment.
15.3 the Ministry of economy reported the findings of the European Commission of the non-compliance and the measures taken. ";
1.7. the express 16. paragraph by the following: "4. in Latvia recognises the machines in accordance with concluded agreements and transnational procedures recognised by the European Union and European economic area countries."
2. the rules shall enter into force on 1 May 2004. Prime Minister i. Emsis economic Minister j. lujans