Cabinet of Ministers Regulations No. 256, Riga, April 12, 2005 (pr. No. 19) the amendments to the Cabinet of 23 august 2001 No. 377 of the regulations ' requirements for steel rolling equipment and technical supervision of equipment order "Issued in accordance with the law" on conformity assessment "7. the first part of the article and the law" on technical supervision of dangerous equipment, "the second part of article 3 to make a Cabinet of 23 august 2001 No. 377 of the regulations ' requirements for steel rolling equipment and technical equipment supervisory arrangements" (Latvian journal , 2001, 123 no) the following amendments: 1. Replace the text, the words "authorized inspection body ' (the fold) with the words" inspection body "(fold). 2. Express 3 and paragraph 4 by the following: "3. The Ministry of economy in cooperation with the relevant technical standards Committee recommends limited liability company" Latvian standards "in connection with these terms, reliance and designing standard applicable list. 4. Limited liability company "Latvian standards" submit for publication in the newspaper "journal" the Latvian National Standard, a list of applicable requirements of these regulations (hereinafter referred to as the applicable standards). " 3. Supplement with 4.1 and 4.2 point as follows: "4.1 steel rolling equipment for technical inspection is entitled to take an accredited institution, for which the economic Ministry has published a notice in the newspaper" Gazette "(hereinafter referred to as the inspection authority), to be adopted by the institution if insp: 4.1 1. accredited Latvian National Accreditation Bureau according to the standard LVSENIS/IEC17020:2005" the main criteria in different types of bodies performing inspection "criteria; 4.1 2. insure your have civil liability for an amount to cover the possible losses incurred by mistake, calculated in cooperation with institutions in the selected insurer of the scope of the risk assessment. 4.2 Latvian National Accreditation Bureau will evaluate and monitor the inspection of institutions in compliance with this provision the requirements of point 4.1. " 4. Make point 7 by the following: "7. each rolling device needs a passport. Rolling plant passport in accordance with the provisions laid down in the annex of the model passport for a specific rolling machine fills the rolling equipment possessor who initiated the use of the equipment in Latvia. " 5. Make the introductory paragraph 8 by the following: ' 8. Rolling equipment holder Passport accompanied by a declaration of conformity for machinery equipment, safety requirements, as well as the installation and operating instructions. The instruction contains the following information: ". 6. Express 10.2. subparagraph by the following: "10.2. ensure steel rolling equipment for a sufficient number of personnel trained and instructed in accordance with the laws and regulations on labor protection requirements for the use of work equipment, as well as provide protection around the teaching matters, taking into account the equipment design and usage conditions;". 7. Express 89 the following: "89. Inspection body performs the rolling equipment first, current technical inspection technical inspection, service life (resources) in the period of inspection and extended emergency technical inspection in accordance with the applicable standards." 8. To make 90. the introductory paragraph as follows: "90. Rolling equipment before installation of the equipment by means of the inspection body shall submit the following documents:". 9. Supplement with 101 as follows: "101. point 4.1 shall enter into force on 1 May 2005." 10. the annex shall be deleted, the words "rolling equipment Installer trade mark (logo)". 11. Replace the chapter IV of the annex, the words "rolling equipment Installer" with the words "rolling equipment holder".
Prime Minister a. Halloween economic Minister A.r. Kariņš