Amendments To The Cabinet Of Ministers Of 7 March 2000, In Regulation No 86 "lifting Lift For Technical Supervision Procedures"
Original Language Title: Grozījumi Ministru kabineta 2000.gada 7.marta noteikumos Nr.86 "Cilvēku celšanai paredzēto pacēlāju tehniskās uzraudzības kārtība"
Read the untranslated law here: https://www.vestnesis.lv/ta/id/107668
Cabinet of Ministers Regulations No. 308 in Riga on May 3, 2005 (pr. No 25 11) amendments to the Cabinet of Ministers of 7 March 2000, in Regulation No 86 "lifting lift for technical supervision order Issued in accordance with the law" on technical supervision of dangerous equipment, "the second part of article 3 to make a Cabinet of 7 March 2000, in Regulation No 86" lifting lift for technical supervision procedures "(Latvian journal, 2000,/91.nr. 90) as follows: 1. Replace the text, the words" authorized inspection body ' (the fold) with the words "inspection body" (fold). 2. the supplement to chapter I 5.1, 5.2, 5.3 and 5.4 as follows: "5.1 the Ministry of economy in cooperation with the relevant technical standards Committee recommends limited liability company" Latvian standards "in connection with these terms, reliance and designing standard applicable list. 5.2 limited liability company "Latvian standards" submit for publication in the newspaper "journal" the Latvian national standard lists that you can apply this provision requirements (applicable standards). 5.3 the technical inspection body is entitled to take an accredited institution, for which the economic Ministry has published a notice in the newspaper "Gazette" (hereinafter referred to as inspection bodies), if it is: 5.31. Latvian National Accreditation Bureau confirmed its compe umbrella term according to standard LVSENIS/IEC17020:2005 "the main criteria in different types of bodies performing inspection" the criteria and requirements of this regulation; 5.32. insure their civil liability of an amount to cover the possible errors or false due to loss of the opinion. 5.4 the Latvian National Accreditation Bureau are assessed and regularly inspected by the inspection body's compliance with this provision the requirements set out in paragraph 5.3. ' 3. Make paragraph 8 by the following: ' 8. Each lift must have a passport in the national language. Passport for a specific hopper in accordance with the provisions laid down in annex 1 of the model passport shall be completed and the data confirms the truth of the possessor. The passport shall contain at least the following: 8.1 the manufacturer, his authorized representative or the importer's name and address; 8.2. the crane type and model; 8.3. the main technical specifications; 8.4. details on the ropes (geometric dimensions, number of wires and materials) and the chains (geometric dimensions and material); 5.3. technical documentation, drawings, electrical equipment and hidroiekārt of the scheme in principle, if they help to understand the instructions, or if the possessor intends to extend the service life of the lift (resource); 8.6. news on security devices (galaslēdž and signalling equipment); 8.7. the service life (resource) years; 8.8. the year of manufacture and the number assigned by the manufacturer. " 4. Delete paragraph 9. 5. Make paragraph 10 by the following: "10. The Passport laws in the order added to the manufacturer or his authorised representative shall draw up a declaration of conformity of the lift and the lift Assembly and operating instructions in the language of the country." 6. Replace the words "paragraph 11.1 at the" with the words "Daddy instructed." 7. Replace paragraph 12.7. number and the word "(annex 1)" with a number and the word "(annex 2). 8. Make the following paragraph 13: "13. The possessor shall ensure a sufficient number of the service personnel who trained and instructed in accordance with the laws and regulations on the protection of health, the use of work equipment, and job training in matters of protection, taking into account the design and conditions of use." 9. Supplement to chapter II 14.1 points as follows: "If the possessor 14.1 changes its structure or main technical parameters, they are obligated to match it with the inspection authority shall make a corresponding entry in the technical passport. If the changes are significant, the possessor shall ensure compliance with the laws and the requirements for machinery safety. " 10. Make a point 15 as follows: "a hopper mounted on a 15 under-prepared pitch, taking the bottom category and characteristics in accordance with the instructions for use." 11. Replace paragraph 18, the number and the word "Annex" to the number 2 and the words "annex 3". 12. Supplement with 20.4 points following below: "20.4. lift safety equipment check." 13. Make the following subparagraphs 28.4.: "28.4. Service staff in the area wear helmets, but amend the workers used the belt to prevent falls from height". 14. Put 36 as follows: "36. During the lift, forklift operator and workers to exchange information using secure bilateral relations, security in the use of the marks pursuant to the requirements of the laws on the protection of health." 15. Supplement with 37.3 points in below: "37.3. the service life (resources)." 16. To supplement the rules behind paragraph 38 with the title of Chapter VI and 38.1 and 38.2 point as follows: "VI. Closing questions 5.31. These provisions section 38.1 shall enter into force on the 1 June 2005. 38.2 the accreditation certificates issued for the inspection authorities until 31 May 2005, is valid until the expiry of the period specified therein. " 17. Replace annex 1 number and the words "annex 1" with a number and the words "annex 2". 18. Replace annex 2, the number and the word "annex 2" with a number and the words "annex 3". 19. To supplement the provisions of the annex by the following: "1. the Cabinet of Ministers of 7 March 2000, the Regulation No 86 of Prime Minister a. Halloween economic Minister A.r. Kariņš
Search Translated Laws of Latvia