Cabinet of Ministers Regulations No. 588 in Riga on July 18, 2006 (pr. No. 38) and defektoskopist of Metālmateriāl welder certification regulated sphere Issued in accordance with the law "on conformity assessment" 7. the first part of the article and the law "About the regulated professions and the recognition of professional qualifications" and of article 32.1 of the i. General questions 1. Rules lays down the requirements for the persons who connect using metālmateriāl welding (welders), and the person who makes the metālmateriāl and welded connection of non-destructive inspection (hereinafter defektoskopist) , the regulated sphere, as well as the certification of welders and defektoskopist. 2. Welded metālmateriāl connection (hereinafter-the welded joins you) is a regulated sphere used in steel, aluminum, copper, nickel, titanium, or zirconium alloy connection by using one of the following hands or partially mechanised welding types: 2.1 electric arc welding;
2.2. oxygen acetylene welding. 3. defektoskopist of welders and compliance is assessed for competence of certification bodies accredited by the State Agency "Latvian National Accreditation Bureau" to the standard LVS EN ISO/IEC 17024 "conformity assessment-General requirements for bodies certifying persons" and the economy Ministry published a notice in the newspaper "Gazette" (hereinafter referred to as certification bodies). II. Requirements for welders 4. Welders may perform work regulated sphere, if their professional qualifications are recognised certification body in accordance with one of the following standards: EN EN 287-4.1 1 "attestation of welders. Fusion welding — part 1: Steel ";
4.2. Lvs EN ISO 9606-2 ' welder qualification test-melting welding-part 2: aluminium and aluminium alloys;
4.3. Lvs EN ISO 9606-3 ' welder at the tation!. Fusion welding-part 3: Copper and copper alloys;
4.4. Lvs EN ISO 9606-4 welder certification examination ". Fusion welding-part 4: nickel and nickel alloys ";
4.5. Lvs EN ISO 9606-5 "welder at the tation!. Fusion welding-part 5: Titanium and titanium alloys, zirconium and zirconium alloys ". 5. to obtain the professional qualification of welder's certificate (hereinafter certificate of welders), the applicant shall submit the relevant certification authority application and education document on the theoretical and practical training course end. 6. Certification Authority by the provisions referred to in paragraph 5 of document assessed the applicant's receipt of the compliance certification of qualification in the field of applied for organising the practical test in accordance with the provisions referred to in paragraph 4 of standard requirements. 7. If the practical test successfully settled and the person is gus amounted 18 years of age, the certification authority shall issue to the applicant a welder certificate. The certificate indicates the welder's name, ID number and scope, the number of the certificate, date of issue and period of validity, as well as certification bodies identification data. 8. In the event of non-compliance with the provisions of 5, 6 or 7 of such requirements, the certification authority shall refuse to issue to the applicant a certificate in writing a welder provides a reasoned refusal. The refusal of the Ministry of the economy may be challenged in the administrative procedure law. 9. the certification body shall withdraw the welder certificate when: 9.1. period of validity of the certificate expires;
9.2. the welder have expressed a desire to waive the certificate;
9.3. a welder at work more than six months has been a break;
9.4. the employer is to be cut from the Welders working on the normatīvtehnisk failure of documents governing welding, and that fact has announced a certification authority.
9.5. reveals that the welder's certificate is issued improperly. 10. Information on the assessment and certification of welder's certification authority shall keep not less than 10 years after the issuance of the certificate of the welder. III. Requirements for defektoskopist 11. Defektoskopist are allowed to make a welded connection of non-destructive tests regulated sphere, if their professional qualifications are recognised by the certification authority in accordance with the standard EN EN 473 "non-destructive testing non-destructive testing-qualification and certification of personnel-main principles". 12. Non-destructive tests carried out using the following methods: 12.1. check with virpuļstrāv;
12.2. test with magnētiskaj particles;
12.3. check with radiography;
12.4. ultrasonic testing;
12.5. testing with coloured solutions (penetration);
12.6. the examination by the acoustic emission;
12.7. testing with the conventional method. 13. for defektoskopist, the professional qualifications certificate (hereinafter certificate of defektoskopist), the applicant shall submit the relevant certification authority application and education document on the theoretical and practical training course end. 14. certification institution of this provision in paragraph 13 of document assessed the applicant's receipt of the compliance certification of qualification in the field of applied for organising the practical test in accordance with the standard EN EN 473 "non-destructive testing non-destructive testing-qualification and certification of personnel-main principles". 15. If the practical test successfully settled and the person has reached 18 years of age, the certification authority shall issue to the applicant a certificate of defektoskopist. Defektoskopist the certificate shall state the name, identity number and scope, the number of the certificate, date of issue and period of validity, as well as certification bodies identification data. 16. Failure to comply with these regulations 13, 14 or 15 of the type referred to in paragraph 1, the certification authority shall refuse to issue to the applicant a certificate of defektosk pist, giving a reasoned refusal in writing. The refusal of the Ministry of the economy may be challenged in the administrative procedure law. 17. The certification body shall withdraw certificates issued defektoskopist if: 17.1. period of validity of the certificate expires;
17.2. defektoskopist will have expressed a desire to waive the certificate;
17.3. defektoskopist's work over the years has been to break;
17.4. the employer is cut from the defektoskopist of the work to be carried out on the normatīvtehnisk document, which is regulated by the non-destructive tests, and that fact has announced a certification authority.
17.5. reveals that the defektoskopist certificate is issued improperly. 18. Information on assessment and certification defektoskopist certificate authority information in not less than 10 years after the issuance of the certificate of defektoskopist. IV. Closing questions 19. Be declared unenforceable in the Cabinet of 27 March 2001, Regulation No 143 "rules on metālmateriāl of welders and defektoskopist certification of professional qualifications regulated sphere" (Latvian journal, 2001, no. 52, 167; 2003; 2004, nr. 68. no). 20. A welder and defektoskopist the competence of supporting documents (certificates) issued to the date of entry into force of the provisions, they are valid until the date of expiry stated on it. 21. the regulations shall enter into force by September 15, 2006. Prime Minister a. Halloween economic Minister a. Štokenberg in