Rules For State Agencies "geospatial Information Agency" Provided The Public Paid Services Price List

Original Language Title: Noteikumi par valsts aģentūras "Latvijas Ģeotelpiskās informācijas aģentūra" sniegto publisko maksas pakalpojumu cenrādi

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now

Read the untranslated law here: https://www.vestnesis.lv/ta/id/156757

Cabinet of Ministers Regulations No. 283 in Riga on May 2, 2007. (pr. No 26 1) rules for State agencies "geospatial information agency" public charge provided services price list Issued in accordance with the law on budget and financial management of the ninth article 5 part 1. determines the National Geospatial Agency's "information agency" public charge provided services price list.
2. the national agency "Latvian geospatial information agency" gives the public a fee for services in accordance with the price list (annex).
3. the provisions of This annex 1.12., 1.20, 1.21 1.28 1.31, 1.34, 1.35, 1.36, and below the price referred to in paragraph 1 in accordance with the order of the following coefficients: coefficient of 1.00 3.1 if the order amount is from 1 to 10 cards, card page, files;
3.2. the factor 0.95, if the order amount is from 11 to 50 cards, card page, files;
3.3. the factor 0.90, if the order amount is from 51 to 100 pages of maps, map page, files;
3.4. the coefficient of 0.85 if the order amount is from 101 to 250 pages of maps, map page, files;
3.5. the coefficient 0.80, if the order amount is from 251 up to 500 pages of maps, map page, files;
3.6. the factor 0.75, if the order amount is from 501 to 1000 card pages, map page, files;
3.7. the ratio 0.70 if the order amount is from 1001 to 1500 pages of maps, map page, files;
3.8. the factor of 0.65 if the order amount is from 1501 to 2000 cards, card page, files;
3.9. the coefficient 0.60, if the order amount is greater than 2000 pages of maps, map layers files page.
Prime Minister a. Halloween instead of the Minister for defence, Minister of finance Spurdziņš o. Editorial Note: regulations shall enter into force by May 9, 2007.
 
 
Annex to the Cabinet on May 2, 2007. for Regulation No 283 national agency "Latvian geospatial information agency" provide public service price list of fees i. public charged no PO box
The type of service the unit price without VAT (Ls) 18% SALES TAX ($) price with VAT (Ls) 1. Cartography 1.1.
Satelītkart (scale 1:50 000) in preparation for the service unchanged (service content: find data, selection, examination and as regards entry without recording media). Standard product data vector formats-apveidfail of SHP, layer, products produced in Latvia's geodetic coordinate system LK-92 (hereinafter referred to as the LK-92 coordinate system): 1.1.1.
If ordered up to 10 cards page 1 page 1 layer card 2.55 0.46 3.01 1.1.2.
If you order 10-30 card page 1 page 1 layer card 1.75 0.32 2.07 1.1.3.
If ordering a 31-70 card page 1 page 1 layer card 1.55 0.28 1.83 1.1.4.
If you order more than 70 pages of card 1 card page 1 layer 1.35 0.24 1.59 1.1.5.
If you order the complete satelītkart Kit for the entire territory of Latvia (131 maps page, 8 layers) 1 full satelītkart Kit 1415.00 254.00 1669.00 1.2.
Satelītkart (scale 1:50 000) data transformation: 1.2.1.
data transformation in the user coordinate system, 1 card page 3.46 0.62 4.08 1.2.2.
card sheet cut to the extent that the user selects 1 card page 1.57 0.28 1.85 1.2.3.
Map page 1 site map join 1.44 0.26 1.70 1.3.
Satelītkart preparation of the user data of the selected format: 1.3.1.
ESRI Geodatabas card page 1 of 1 layer 0.19 0.03 0.22 1.3.2.
DGN, DXF 1 card page 1 layer 0.44 0.08 0.52 1.3.3.
other format 1 card page 1 layer 2.07 0.37 2.44 1.4.
Topographic maps (scale 1:50 000) for the issue of the preparation (service content: organize your data in the manner required for the client without recording media. Standard product data in vector formats-apveidfail (SHP), the layer product made FAS-92 coordinate system according to the technological documentation for the topographic maps 1:50 000 M civil version requirements and coding system ", given that" simple layer "is geodetic and determine points, building, industrial and social objects, point objects, power lines, naftasvad, gas, railways, with a rail and road related ārpusmērog objects, bridges and related objects Hydrographic point associated with objects, in construction, waterworks with vegetation associated with point objects, terrain-related point, border, grid, but "sophisticated layer" – the ārpusmērog building, roads, different line object (other than those included in the just layers), water, land use, izolīnij, names): 1.4.1.
1 page 1 just arranging the layers in the layer 1 6.59 1.19 7.78 1.4.2.
1 page 1 of 1 in the layer arranging complex layer 20.90 3.76 24.66 1.4.3.
If you order 10-30 card pages: 1.4.3.1.
1 page 1 just arranging the layers in the layer 1 4.61 0.83 5.44 1.4.3.2.
1 page 1 of 1 in the layer arranging complex layer 14.63 2.63 17.26 1.4.4.
If ordering a 31-70 maps page: 1.4.4.1.
1 page 1 just arranging the layers in the layer 1 3.30 0.59 3.89 1.4.4.2.
1 page 1 of 1 in the layer arranging complex layer 10.45 1.88 12.33 1.4.5.
If you order more than 70 card pages: 1.4.5.1.
1 page 1 simple layer 1 layer 2.31 0.42 2.73 1.4.5.2 ranking.
1 page 1 of 1 in the layer arranging complex Layer 7.32 1.32 8.64 1.4.6.
If ordering a full set of topographic maps of the entire territory of Latvia (131 maps page 19 layers) 1 full set of topographic maps 10343.0 1862.0 12205.00 1.5.
Satelītkart-raster data set for the issue of the preparation for the entire territory of Latvia unchanged (product data formats GEOTIFF, product made FAS-92 reference system) 1 data Kit 100.00 18.00 118.00 1.6.
The sales Pack satelītkart (scale 1:50 000) recording media unchanged in 700 MB CD one (CD) (raster format JPG, PNG, GIF) 1 card 11.06 1.99 13.05 1.7.
Satelītkart browser and the service unchanged (the set includes satelītkart for data and use program) 1 CD 6.70 1.21 7.91 1.8.
Raster maps (scale 1:50 000) manufacture of satelītkart or topographic map database: 1.8.1.
raster maps (scale 1:50 000) cover (Format TIFF, JPG, PNG, GIF, BMP) (product made FAS-92 reference system) 1 raster maps page 5.53 1.00 6.53 1.8.1.1.
raster maps (scale 1:50 000) cover (Format TIFF, JPG, PNG, GIF, BMP) (product made FAS-92 coordinate system), if the amount of the war produced more than 30 raster map page 1 site map 3.87 0.70 4.57 1.8.1.2.
raster maps (scale 1:50 000) cover (Format TIFF, JPG, PNG, GIF, BMP) (product made FAS-92 coordinate system), if the amount of the war produced more than 70 cards page 1 map sheet raster 2.76 0.50 3.26 1.8.2.
raster maps (scale 1:50 000) cover (at grid) (JPG, TIFF, MrSID format) (product made FAS-92 reference system) 1 raster maps page 7.31 1.32 8.63 1.8.2.1.
raster maps (scale 1:50 000) cover (at grid) (JPG, TIFF, MrSID format) (product made FAS-92 coordinate system), if the amount of the war produced more than 30 pages of card 1 card page for 5.12 0.92 6.04 raster 1.8.2.2.
raster maps (scale 1:50 000) cover (at grid) (JPG, TIFF, MrSID format) (product made FAS-92 coordinate system), if the amount of the war produced more than 70 cards page 1 map sheet raster 3.66 0.66 4.32 1.9.
Individual card manufacture customer specific parameters from data maintained by the Agency, with which the Agency has the right to act independently: 1.9.1.
fragment excision and transform 1 hour 7.67 1.38 9.05 1.9.2.
simple object data selection, sorting and inspection 1 hour 8.80 1.58 10.38 1.9.3.
complex object data selection, sorting and verification of 9.73 1.75 11.48 1.10 1 hour.
Aerial photography of atbalstpunkt marking atbalstpunkt 59.97 10.79 70.76 1.11 of the 1.
Aerial photography of atbalstpunkt of atbalstpunkt of 78.36 14.10 92.46 trying 1 1.12.
Aeroain scanning aeroain-11.25 2.03 13.28 1.13 1.
Aeroain 1 aeroain manufacture of photocopy of 8.85 1.59 10.44 1.14.
Digital aeroain aeroain-1 preparation of 6.85 1.23 8.08 1.15.
Aerotriangulācij one ortofot the card page 1 (2 models) 25.13 4.52 29.65 1.16.
Ortofot map (scale 1:10 000) manufacturing (products made FAS-92 coordinate system) (service content: making of ortofotokarta from original aerial imagery or cosmic) 25 115.93 20.87 136.80 1.17 km2.
Ortofot map (scale 1:5 000) manufacturing (products made FAS-92 coordinate system) (service content: making of ortofotokarta from original aerial imagery or cosmic) 7.5 km2 126.75 22.82 149.57 1.18.
Ortofot map (scale 1:2000) manufacture (products made LK-92 coordinate system) (service content: making of ortofotokarta from original aerial imagery or space businesses) 143.27 25.79 169.06 1.19 km2.

Ortofot map (scale 1:1 000) manufacturing (products made FAS-92 coordinate system) (service content: making of ortofotokarta from original aerial imagery or space businesses) 170.73 30.73 201.46 1.20 km2.
Ortofot card issuance according to photography years ago (without recording media) (GEOTIFF format, will LK-92 coordinate system): 1.20.1.
aerial photography was made before 3 years 1 file/1 page 15.00 2.70 17.70 1.20.2.
aerial photography was made 2 years ago 1 file/1 page 20.00 3.60 23.60 1.20.3.
aerial photography carried out in less than 2 years ago 1 file/page 1 1.21 25.12 4.52 29.64.
Ortofot cards (scale of 1:10,000 and 1:2000) processing Adobe Illustrator maps page 1 7.04 1.27 8.31 1.22.
The surface elevation model production (service content: creating a ortofot card, you get a digital elevation model data that are modified after the subscriber conditions): 1.22.1.
with a regular network step 20 m (scale 1:10 000) (1) cards (25 km2) of 43.98 7.92 51.90 1.22.2.
with a regular network step 5 – 7 m (a scale of 1:1000, 1:2000) 1 card page (1 km2) 165.00 29.70 194.70 1.22.3.
the copy has been made with the regular network step 20 m (scale 1:10 000) (1) cards (25 km2) 4.02 0.72 4.74 1.23.
Simplified topographic maps (scale 1:10 000) escalation (service content: existing simplified topographic maps (scale 1:10 000) in information according to the most recent aerial photography materials and existing situation) 1 card page (category 3) (25 km2) 1135.18 204.33 1339.51 1.24.
Earth surface height model (terrain layer) matching with simplified topographic maps (scale 1:10 000) situation (service content: terrain layer obtained is compared with the rest of the map object layers, clarified and corrected, ensuring their mutual interlinking) 1 card page (category 3) (25 km2) 250.00 45.00 295.00 1.25.
Topographic plan (scale 1:2000) production without relief (vector format is DGN) 1 card page (category 3) (1 km2) 1869.36 336.48 2205.84 1.26.
The terrain layer (scale 1:2000) and matching with the situation of the topographic plan (scale 1:2000) (service content: terrain layer obtained is compared with the rest of the map object layers, clarified and corrected, ensuring their mutual interlinking) 1 card page (category 3) (1 km2) 210.87 37.96 248.83 1.27.
Full topographic maps (scale 1:10 000) manufacturing (vector format is DGN) according to the technological documentation for topographic maps in scale 1:10000 objects "1 card page (category 3) (25 km2) 3445.29 620.15 4065.44 1.28.
Topographic maps and plans for the service (without recording media): 1.28.1.
simplified topographic maps (scale 1:10 000) in preparation for service (vector format is DGN) 1 card page (25 km2) 34.00 6.12 40.12 1.28.2.
full topographic maps (scale 1:10 000) in preparation for service (vector format is DGN) 1 card page (25 km2) 103.00 18.54 121.54 1.28.3.
topographic plan (scale 1:2000) in preparation for the issue of a (vector format is DGN) 1 card page (1 km2) 56.00 10.08 66.08 1.29.
Topographic map of the plan and tying with the database (a scale of 1:10,000 and 1:2000) (service content: graphical data linking with user tables that contain a reference to the data in the customer's geographical location) 1 card page (category 3) 125.65 22.62 148.27 1.30.
Ortofot, topographical plan and card cut user selected area (scale 1:10 000) (25 km2) 1 cutout 18.85 3.39 22.24 1.31.
Topographic map (scale 1:10 000) and topographical plan (scale 1:2000) conversion, DWG and SHP formats 1 hour 12.56 2.26 14.82 1.32.
Topographic map (scale 1:10 000) transform to another format (JPG, TIFF, MrSID) 1 hour 8.80 1.58 10.38 1.33.
Topographic maps and plans of the aizrāmj design training 1 hour 11.80 2.12 13.92 1.34.
Scanning: 1.34.1.
single page format scanning 1 A2 size sheet 5.34 0.96 6.30 1.34.2.
single page format scanning 1 A3 page 3.71 0.67 4.38 1.34.3.
single page format scanning 1 A4 page 2.83 0.51 3.34 1.34.4.
single page format scanning 1 A1 size sheet 5.65 1.02 6.67 1.34.5.
single page format scanning 1 A0 page 6.53 1.18 7.71 1.35.
Scanning with the attraction of the grid page 1 8.42 1.52 9.94 1.36.
Scanning with the attraction of the grid and more war into single page 1 10.30 1.85 12.16 2. Geodesy 2.1.
Kamerāl works (design, calculation, data analysis and report) 1 hour 15.31 2.76 18.07 2.2.
Nivelēšan: 2.2.1.
nivelēšan travel working rapper deployments (one way) 1 km 33.04 5.95 38.99 2.2.2.
nivelēšan line reconnaissance 1 km 3.90 0.70 4.60 2.2.3.
nivelēšan the bottom survey and design of the rapper updated 1 paragraph 8.04 1.45 9.49 2.2.4.
nivelēšan the wall of the rapper and mark survey and updated 1 paragraph 2.2.5.5.03 0.91 5.94
nivelēšan the bottom of rapper 1 paragraph 2.2.6 79.65 14.34 93.99.
nivelēšan the wall of the rapper and mark installation 1 paragraph 17.59 3.17 20.76 2.2.7.
nivelēšan to increase the average quadratic error of up to 0.5 mm/km 1 km 97.50 17.55 115.05 2.2.8.
nivelēšan to increase the average quadratic error up to 1.0 mm/km 1 km 38.95 7.01 45.96 2.2.9.
nivelēšan to increase the average quadratic error up to 3.0 mm/km 1 km 31.41 5.65 37.06 2.3.
Global positioning system (GPS) to determine the network installation point 1 paragraph 51.51 9.27 60.78 2.4.
GPS base station data subscription: 2.4.1.
GPS base station data in real time subscription for 1 year 1 year 380.55 68.50 449.05 2.4.2.
GPS base station data in real time to the subscription 1 month 1 month 55.31 9.96 65.27 2.4.3.
GPS base station data in real time subscription for 1 day 1 day 10.93 1.97 12.90 2.5.
GPS base station data postprocessing (up to 2 months) free of charge 3. Geospatial information copy, print, CD preparation 3.1.
The one copy has been made: 3.1.1.
A4 page 1 A4 page 0.25 0.05 0.30 3.1.2.
A3 page 1 A3 page of 0.50 0.09 0.59 3.2.
Single sided copies of the original manufacture of the principals: 3.2.1.
A4 page 1 A4 page 0.13 0.02 0.15 3.2.2.
A3 page 1 A3 page of 0.25 0.05 0.30 3.3.
Black and white prints according to the format: 3.3.1.
A4 page 1 A4 page 0.12 0.02 0.14 3.3.2.
A3 page 1 A3 page of 0.75 0.14 0.89 3.3.3.
A2 size sheet 1 A2 size sheet 1.70 0.31 2.01 3.3.4.
A1 size sheet 1 A1 size sheet 3.14 0.57 3.71 3.3.5.
A0 A0 page 1 page 5.21 0.94 6.15 3.4.
Ortofot card or ploterizdruk to the vector preparation 1 hour 12.34 2.22 14.56 3.5.
Color ploterizdruk on paper: 3.5.1.
up to A4 format page 1 ploterizdruk in 1.05 0.19 1.24 3.5.2.
up to A3 format page 1 ploterizdruk-2.12 0.38 2.50 3.5.3.
up to A2 format page 1 of 4.03 0.73 4.76 ploterizdruk 3.5.4.
up to A1 format page 1 of 6.44 1.16 7.60 ploterizdruk 3.5.5.
up to A0 page 1 of 9.44 1.70 11.14 3.6 ploterizdruk
Color ploterizdruk on photo: 3.6.1.
up to A4 format page 1 ploterizdruk-3.04 0.55 3.59 3.6.2.
up to A3 format page 1 of 5.80 1.04 6.84 ploterizdruk 3.6.3.
up to A2 format page 1-11.20 2.02 13.22 3.6.4 ploterizdruk.
up to A1 format page 1 's ploterizdruk 20.63 3.71 24.34 3.6.5.
up to A0 page 1 ploterizdruk 41.12 7.40 48.52 of 3.7.
Data processing, preparation and design digital form 1 hour 12.56 2.26 14.82 3.8.
Geospatial information data transfer to media: 3.8.1.
CD-ROM presentation of the matrix with 1 CD-ROM 4.90 0.88 5.78 3.8.2.
DVD-ROM design matrix with 1 in the DVD-ROM 5.03 0.91 5.94 3.8.3.
floppy disk 2HD floppy drive – 1-2HD 0.82 0.15 0.97 4. other works 4.1.
Expert advice, cartography and Geodesy ģeoinformācij questions: 4.1.1.
orally 1 hour 9.73 1.75 11.48 4.1.2.
writing 1 standard page 12.07 2.17 14.24 4.2.
The average cost of a single additional man-hours work necessary to ensure the execution of the order 1 hour 6.28 1.13 7.41 4.3.
The Agency's use of transport, if necessary, to ensure the execution of the order of 1 km 0.30 0.05 0.35 4.4.
The Agency's archive and material circulation Fund 1 hour 3.78 0.68 4.46 4.5.
Expert services in 1 hour ģeoinformācij 17.52 3.15 20.67 4.6.
The development of thematic maps and other geospatial information preparation related services 1 hour 14.60 2.63 17.23 4.7.
Subscribe to the monthly data subscription fee 59.66 10.74 70.40 4.8.
Geodetic or cartographic data preparation for deployment on the FTP (data transfer protocol server) Subscriber needs 1 file 3.14 0.57 3.71 5. at pārpoligrāfisk printing production 5.1.
Color separation at pārpoligrāfisk products: 5.1.1.
A4 movie 1 movie 2.30 0.41 2.71 5.1.2.
A3 film 1 film 3.10 0.56 3.66 5.1.3.
A2 film 1 film 4.10 0.74 4.84 5.1.4.

A1-format film 1 film 7.60 1.37 8.97 5.1.5.
B1-format film 1 film 9.00 1.62 10.62 5.2.
General pārpoligrāfisk of the production printing using printer SM-102:5.2.1.
single sided: 5.2.1.1.
offset paper 60 – 90 g 1000 sheets 4.15 0.75 4.90 5.2.1.2.
offset paper 100-200 g of 1000 sheets 4.30 0.77 5.07 5.2.1.3.
offset paper for over 200 g of 1000 sheets 7.07 1.27 8.34 5.2.1.4.
coated paper 60 – 90 g 1000 sheets 4.54 0.82 5.36 5.2.1.5.
coated paper-100 sheets 200 g 1000 4.84 0.87 5.71 5.2.1.6.
over 1000 200 g coated paper sheets 7.99 1.44 9.43 5.2.1.7.
5.2.1.8 lacquer 1000 sheets of 6.76 1.22 7.98.
adding the form 1 form 10.68 1.92 12.60 5.2.1.9.
color washing system section 5.2.2 6.30 1.13 7.43 1.
bilateral: 5.2.2.1.
offset paper 60 – 90 g 1000 sheets 8.30 1.49 9.79 5.2.2.2.
offset paper 100-200 g of 1000 sheets 8.60 1.55 10.15 5.2.2.3.
offset paper for over 200 g of 1000 sheets 14.14 2.55 16.69 5.2.2.4.
coated paper 60 – 90 g 1000 sheets 9.08 1.63 10.71 5.2.2.5.
coated paper-100 sheets 200 g 1000 9.68 1.74 11.42 5.2.2.6.
over 1000 200 g coated paper sheets 15.99 2.88 18.87 5.2.2.7.
varnishing of 1000 sheets 13.52 2.43 15.95 5.3.
General pārpoligrāfisk of the production printing using printer Planeta (Warim): 5.3.1.
single sided: 5.3.1.1.
offset paper 60 – 90 g 1000 sheets 5.15 0.93 6.08 5.3.1.2.
offset paper 100-200 g of 1000 sheets 5.46 0.98 6.44 5.3.1.3.
offset paper for over 200 g of 1000 sheets 8.53 1.54 10.07 section 5.3.1.4.
coated paper 60 – 90 g 1000 sheets 5.69 1.02 6.71 5.3.1.5.
coated paper-100 sheets 200 g 1000 6.07 1.09 7.16 5.3.1.6.
over 1000 200 g coated paper sheets 9.84 1.77 11.61 5.3.1.7.
1000 sheets of 9.15 1.65 10.80 5.3.1.8 varnishing.
adding the form 1 form 13.30 2.39 15.69 5.3.1.9.
color system washing 1 section 5.3.2 7.99 1.44 9.43.
bilateral: 5.3.2.1.
offset paper 60 – 90 g 1000 sheets 10.30 1.85 12.15 5.3.2.2.
offset paper 100-200 g of 1000 sheets 10.92 1.97 12.89 5.3.2.3.
offset paper for over 200 g of 1000 sheets 17.06 3.07 20.13 5.3.2.4.
coated paper 60 – 90 g 1000 sheets 11.38 2.05 13.43 5.3.2.5.
coated paper-100 sheets 200 g 1000 12.14 2.19 14.33 5.3.2.6.
over 1000 200 g coated paper sheets 19.68 3.54 23.22 5.3.2.7.
varnishing of 1000 sheets 18.30 3.29 21.59 5.4.
Paper reel iztīšan: 5.4.1.
1 roll of 1000 sheets 3.15 0.57 3.72 5.4.2.
1000 sheets of 2 reels 2.00 0.36 2.36 5.4.3.
1000 sheets of 3 reels 1.56 0.28 1.84 5.4.4.
of the 4 reels 1000 sheets 1.46 0.26 1.72 5.5.
Paper trimming before print: 5.5.1.
format 84 x 100-ofsetpapīr for up to 1000 sheets 1.41 0.25 1.66 5.5.2.
format 84 x 100 – coated paper of up to 1000 sheets 1.62 0.29 1.91 5.5.3.
format to a 1000 x 124-106 ofsetpapīr sheets 1.62 0.29 1.91 5.5.4.
format to a 124-106 x coated 1000 sheets 1.82 0.33 2.15 5.6.
Sheet folding: 5.6.1.
using film equipment Stahlfolder KD 94 folding Top line: 5.6.1.1.
1 fold folding of 1000 sheets ofsetpapīr-1.11 0.20 1.31 5.6.1.2.
2 fold folding-ofsetpapīr 1000 sheets of 1.32 0.24 1.56 5.6.1.3.
3 fold folding-ofsetpapīr 1000 sheets of 1.92 0.35 2.27 5.6.1.4.
4 fold folding-ofsetpapīr 1000 sheets of 2.23 0.40 2.63 5.6.1.5.
5 and 6 fold folding-ofsetpapīr 1000 sheets of 3.53 0.64 4.17 5.6.1.6.
pressing of 1000 sheets ofsetpapīr-1.23 0.22 1.45 5.6.1.7.
1 fold folding of 1000 sheets of coated-1.41 0.25 1.66 5.6.1.8.
2 fold folding of 1000 sheets of coated-1.69 0.30 1.99 5.6.1.9.
3 fold folding coated 1000 sheets of 2.34 0.42 2.76-5.6.1.10.
4 fold folding of 1000 sheets coated 2.84 0.51 3.35 – 5.6.1.11.
5 and 6 fold folding of 1000 sheets of coated-4.22 0.76 4.98 5.6.2.
using the pliable car N 5090:5.6.2.1.
1 fold folding-ofsetpapīr 1000 sheets of 1.69 0.30 1.99 5.6.2.2.
2 fold folding-ofsetpapīr 1000 sheets of 1.92 0.35 2.27 5.6.2.3.
3 fold folding-ofsetpapīr 1000 sheets of 2.84 0.51 3.35 5.6.2.4.
4 fold folding-ofsetpapīr 1000 sheets of 3.02 0.54 3.56 5.6.2.5.
5 and 6 fold folding-ofsetpapīr 1000 sheets of 4.22 0.76 4.98 5.6.2.6.
pressing of 1000 sheets ofsetpapīr-1.23 0.22 1.45 5.6.2.7.
1 fold folding of 1000 sheets of coated-1.83 0.33 2.16 5.6.2.8.
2 fold folding of 1000 sheets of coated-2.11 0.38 2.49 5.6.2.9.
3 fold folding of 1000 sheets of coated paper – 3.02 0.54 3.56 5.6.2.10.
4 fold folding of 1000 sheets coated 3.23 0.58 3.81 – 5.6.2.11.
5 and 6 fold folding of 1000 sheets of coated-4.22 0.76 4.98 5.6.2.12.
change the format 1 time 4.00 0.72 4.72 5.6.3.
sheet folding by hand: 5.6.3.1.
1 fold folding-ofsetpapīr 1000 sheets of 14.06 2.53 16.59 5.6.3.2.
2, 3, 4 – ofsetpapīr will fold folding 1000 paper 56.35 10.14 66.49 5.6.3.3.
5, 6, 7 – the ofsetpapīr fold folding 1000 paper 140.8 25.34 166.14 5.6.3.4.
1 fold folding of 1000 sheets of coated-20.14 3.63 23.77 5.6.3.5.
2, 3, 4 fold folding of sheet coated paper-1000 84.50 15.21 99.71 5.6.3.6.
5, 6, 7 fold folding coated 1000 sheets of 211.24 38.02 249.26-5.7.
Sheet collation: 5.7.1.
1-10 sheets folded 1000 PCs.
5.7.2 23.45 4.22 27.67.
11-20 sheets folded 1000 PCs.
65.03 11.71 76.74 5.7.3.
21 and more folded sheets 1000 PCs.
5.7.4 120.69 21.72 142.41.
fitting-1000 PCs.
31.29 5.63 36.92 5.8.
General pārpoligrāfisk of the production control: 5.8.1.
two-sided print: 5.8.1.1.
1 color 1000 sheets 3.92 0.71 4.63 5.8.1.2.
2 colors of 1000 sheets 4.69 0.84 5.53 5.8.1.3.
4 colors 1000 sheets 5.53 1.00 6.53 5.8.2.
single-sided printing: 5.8.2.1.
1 color 1000 sheets 3.84 0.69 4.53 5.8.2.2.
2 colors of 1000 sheets 4.23 0.76 4.99 5.8.2.3.
4 colors 1000 sheets 4.69 0.84 5.53 5.9.
Cutting of finished products: 5.9.1.
ofsetpapīr: 5.9.1.1.
clip from 4 sides 1000 sheets 2.46 0.44 2.90 5.9.1.2.
clip from 4 sides and cutting the 2 parts 1000 sheets 2.77 0.50 3.27 5.9.1.3.
clip from 4 sides and cutting 4 parts 1000 sheets 2.92 0.53 3.45 5.9.1.4.
clip from 4 sides and cutting parts 6-8 1000 sheets 3.23 0.58 3.81 5.9.1.5.
clip from 4 sides and cutting more than 8 parts 1000 sheets 3.77 0.68 4.45 5.9.2.
coated paper: 5.9.2.1.
clip from 4 sides 1000 sheets 2.69 0.48 3.17 5.9.2.2.
clip from 4 sides and cutting the 2 parts 1000 sheets 2.92 0.53 3.45 5.9.2.3.
clip from 4 sides and cutting 4 parts 1000 sheets 3.38 0.61 3.99 5.9.2.4.
clip from 4 sides and cutting parts 6-8 sheets 3.69 0.66 4.35 5.9.2.5 1000.
clip from 4 sides and cutting more than 8 parts 1000 sheets 4.30 0.77 5.07 5.10.
Brochure and magazine sewing: 5.10.1.
using the sewing – cutting Assembly: 5.10.1.1.
sewing with 1-2 pašuzlicēj-1000 EC.
5.10.1.2 6.05 1.09 7.14.
sewing with 3-4 of 1000 EC pašuzlicēj.
5.10.1.3 12.05 2.17 14.22.
sewing with 5-6 pašuzlicēj of 1000 EC.
20.12 3.62 23.74 5.10.1.4.
sewing, sketchbook on hand 1000 EC.
26.42 4.76 31.18 5.10.1.5.
sewing with complete brochures of 1000 EC taxation.
31.65 5.70 37.35 5.10.1.6.
change the format 1 time 8.40 1.51 9.91 5.10.2.
using wire sewing machine: 5.10.2.1.
brochure (A 5 format) 1000 EC.
33.80 6.08 39.88 5.10.2.2.
brochure (A 4 format) 1000 EC.
5.11 42.25 7.61 49.86.
Book gluing: 5.11.1.
using bonding machine Eurobind: 5.11.1.1.
deck thickness up to 1 cm 1000 EC.
5.11.1.2 42.25 7.61 49.86.
spine thickness of 1-1,5 cm 1000 EC.
46.94 8.45 55.39 5.11.1.3.
spine thickness 1.5 cm above 1000 EC.
5.11.2 52.81 9.51 62.32.
using bonding machine Fostbind: 5.11.2.1.
deck thickness up to 1 cm 1000 EC.
5.11.2.2 70.41 12.67 83.08.
spine thickness of 1-1,5 cm 1000 EC.
5.11.2.3 84.5 15.21 99.71.
spine thickness 1.5 cm above 1000 EC.
130.00 23.40 153.40 5.12.
Ready to book and brochure from the crop 3 parties: 5.12.1.
with 3 knife cutting machine 1000 EC.
6.15 1.11 7.26 5.12.2.
1 knife cutting machine 1000 EC.
21.37 3.85 25.22 5.13.
Folders with cords, flanges 1000 EC.
105.62 19.01 124.63 5.14.
Folder rievošan: 5.14.1
1-3 1000 EC grooves.
8.45 1.52 9.97 5.14.2.
4-6 slots 1000 EC.
5.14.3 12.07 2.17 14.24.
7-8 slots 1000 EC.
18.78 3.38 22.16 5.15.
Product packing: 5.15.1.
maps, books, journals, 1000 PCs.
4.45 0.80 5.25 5.15.2.
forms of advertising leaflets 1000 PCs.
0.12 0.02 0.14 5.16.
Copy the shape 1 piece.
5.90 1.06 6.96 5.17.
Reprography and project realization: 5.17.1.
the pārpoligrāfisk cover art of expenditure development expenditure 1 cover 139.37 25.09 164.46 5.17.2.
Book facing artistic concept development concept 5.17.3 40.65 7.32 47.97 1.
technical layout 1 p.
1.43 0.26 1.69 5.17.4.
advertising booklet layout (A4 duplex) 1 PC.
5.17.5 29.60 5.33 34.93.
poster design in artistic development (for example, A1, A0, B1) 1 PC.
49.36 8.88 58.24

5.17.6. business cards in artistic design development 1 business card 9.55 1.72 11.27 5.17.7.
create logo 1 logo 79.56 14.32 93.88 5.17.8.
preparing images for color separations (scanning, processing): 5.17.8.1.
to A5 format black and white picture 1 5.17.8.2 0.95 0.17 1.12.
up to A4 format black and white picture 1 1.91 0.34 2.25 5.17.8.3.
up to A3 format black and white picture of 3.34 0.60 3.94 5.17.8.4 1.
up to A5 size colour picture 1 1.91 0.34 2.25 5.17.8.5.
up to A4 format colour picture 1 4.30 0.77 5.07 5.17.8.6.
up to A3 format colour picture 1 6.68 1.20 7.88 5.17.9.
projects development: 5.17.9.1.
the author's work (p. 1-1800 characters) 1 p.
5.17.9.2 7.55 1.36 8.91.
a technical editor working 1 book 203.25 36.59 239.84 5.17.9.3.
the work of Latvian language Editor (p. 1-1800 characters) 1 p.
5.17.9.4 2.32 0.42 2.74.
language Editor's work in foreign languages (p. 1-1800 characters) 1 p.
3.48 0.63 4.11 5.17.9.5.
the work of Latvian language proofreader (1 p. – 1800 characters) 1 p.
1.74 0.31 2.05 5.17.9.6.
proofreader jobs in foreign languages (p. 1-1800 characters) 1 p.
2.90 0.52 3.42 5.17.9.7.
the interpreter to the Latvian language (p. 1-1800 characters) 1 p.
8.13 1.46 9.59 5.17.9.8.
translate to foreign languages (p. 1-1800 characters) 1 p.
II. Delivery of 9.87 1.78 11.65 no PO box
The type of service the unit price without VAT (Ls) 5% SALES TAX ($) price with VAT (Ls) 6. Cartographic editions (printed editions, except Atlanta) 6.1.
Latvian satelītkart (scale 1:50 000) map sheet 0.80 0.04 0.84 1 6.2.
Latvian satelītkart (scale 1:50 000), if the order quantity exceeds 150 copies card page one order 1 card sheet 0.65 0.03 0.68 6.3.
Latvia topographic map (scale 1:50 000) 1 card page 1.08 0.05 1.13 6.4.
Latvia topographic map (scale 1:50 000), if the order quantity exceeds 150 copies card page one order 1 card page 0.87 0.04 0.91 6.5.
Latvia topographic map (scale 1:25000) map of 1.00 0.05 1.05 page 1 6.6.
Latvia topographic map (scale 1:25000), if the order quantity exceeds 150 copies card page one order 1 card page 0.81 0.04 0.85 6.7.
Individual packaged topographic map 1 map sheets to 10.00 0.50 10.50 6.8.
Colorful ortofot-map 1 map page 1.44 0.07 1.51 6.9.
Topographic map (scale 1:10 000) – the standard version 1 card page 1.23 0.06 1.29 6.10.
Topographic map (scale 1:10 000), two-sided version in 1 card page 2.19 0.11 2.30 6.11.
Topographic map (scale 1:10 000) – non-standard option 1 map page 7 preparation of 1.54 0.08 1.62 Books and delivery 7.1.
Color separation at pārpoligrāfisk products: 7.1.1.
A4 movie 1 movie 2.30 0.12 2.42 7.1.2.
A3 film 1 film 3.10 0.16 3.26 7.1.3.
A2 film 1 film 4.10 0.20 4.30 7.1.4.
A1-format film 1 film 7.60 0.38 7.98 7.1.5.
B1-format film 1 film 9.00 0.45 9.45 7.2.
General pārpoligrāfisk of the production printing using printer SM-102:7.2.1.
single sided: 7.2.1.1.
offset paper 60 – 90 g 1000 sheets 4.15 0.21 4.36 7.2.1.2.
offset paper 100-200 g of 1000 sheets 4.30 0.22 4.52 7.2.1.3.
offset paper for over 200 g of 1000 sheets 7.07 0.35 7.42 7.2.1.4.
coated paper 60 – 90 g 1000 sheets 4.54 0.23 4.77 7.2.1.5.
coated paper-100 sheets 200 g 1000 4.84 0.24 5.08 7.2.1.6.
over 1000 200 g coated paper sheets 7.99 0.40 8.39 7.2.1.7.
varnishing of 1000 sheets 6.76 0.34 7.10 7.2.1.8.
adding the form 1 form 10.68 0.53 11.21 7.2.1.9.
color system washing 1 section 6.30 0.32 6.62 7.2.2.
bilateral: 7.2.2.1.
offset paper 60 – 90 g 1000 sheets 8.30 0.41 8.71 7.2.2.2.
offset paper 100-200 g of 1000 sheets 8.60 0.43 9.03 7.2.2.3.
offset paper for over 200 g of 1000 sheets 14.14 0.71 14.85 7.2.2.4.
coated paper 60 – 90 g 1000 sheets 9.08 0.45 9.53 7.2.2.5 there.
coated paper-100 sheets 200 g 1000 9.68 0.48 10.16 7.2.2.6.
over 1000 200 g coated paper sheets 15.99 0.80 16.79 7.2.2.7.
varnishing of 1000 sheets 13.52 0.68 14.20 7.3.
General pārpoligrāfisk of the production printing using printer Planeta (Warim): 7.3.1.
single sided: 7.3.1.1.
offset paper 60 – 90 g 1000 sheets 5.15 0.26 5.41 7.3.1.2.
offset paper 100-200 g of 1000 sheets 5.46 0.27 5.73 7.3.1.3.
offset paper for over 200 g of 1000 sheets 8.53 0.43 8.96 7.3.1.4.
coated paper 60 – 90 g 1000 sheets 5.69 0.28 5.97 7.3.1.5.
coated paper-100 sheets 200 g 1000 6.07 0.30 6.37 7.3.1.6.
over 1000 200 g coated paper sheets 9.84 0.49 10.33 7.3.1.7.
1000 sheets of 9.15 0.46 9.61 7.3.1.8 varnishing.
adding the form 1 form 13.30 0.66 13.96 7.3.1.9.
color system washing 1 section 7.99 0.40 8.39 7.3.2.
bilateral: 7.3.2.1.
offset paper 60 – 90 g 1000 sheets 10.30 0.52 10.82 7.3.2.2.
offset paper 100-200 g of 1000 sheets 10.92 0.55 11.47 7.3.2.3.
offset paper for over 200 g of 1000 sheets 17.06 0.85 17.91 7.3.2.4.
coated paper 60 – 90 g 1000 sheets 11.38 0.57 11.95 7.3.2.5.
coated paper-100 sheets 200 g 1000 12.14 0.61 12.75 7.3.2.6.
over 1000 200 g coated paper sheets 7.3.2.7 19.68 0.98 20.66.
varnishing of 1000 sheets 18.30 0.92 19.22 7.4.
Paper reel iztīšan: 7.4.1.
1 roll of 1000 sheets 3.15 0.16 3.31 7.4.2.
1000 sheets of 2 reels 2.00 0.10 2.10 7.4.3.
1000 sheets of 3 reels 1.56 0.08 1.64 7.4.4.
of the 4 reels 1000 sheets 1.46 0.07 1.53 7.5.
Paper trimming before print: 7.5.1.
format 84 x 100-ofsetpapīr for up to 1000 sheets 1.41 0.07 1.48 7.5.2.
format 84 x 100 – coated paper of up to 1000 sheets 1.62 0.08 1.70 7.5.3.
format to a 1000 x 124-106 ofsetpapīr sheets 1.62 0.08 1.70 7.5.4.
format to a 124-106 x coated 1000 sheets 1.82 0.09 1.91 7.6.
Sheet folding: 7.6.1.
using film equipment Stahlfolder KD 94 folding Top line: 7.6.1.1.
1 fold folding of 1000 sheets ofsetpapīr-1.11 0.06 1.17 7.6.1.2.
2 fold folding-ofsetpapīr 1000 sheets of 1.32 0.07 1.39 7.6.1.3.
3 fold folding-ofsetpapīr 1000 sheets of 1.92 0.10 2.02 7.6.1.4.
4 fold folding-ofsetpapīr 1000 sheets of 2.23 0.11 2.34 7.6.1.5.
5 and 6 fold folding-ofsetpapīr 1000 sheets of 3.53 0.18 3.71 7.6.1.6.
pressing of 1000 sheets ofsetpapīr-1.23 0.06 1.29 7.6.1.7.
1 fold folding of 1000 sheets of coated-1.41 0.07 1.48 7.6.1.8.
2 fold folding of 1000 sheets of coated-1.69 0.08 1.77 7.6.1.9.
3 fold folding coated 1000 sheets of 2.34 0.12 2.46-7.6.1.10.
4 fold folding of 1000 sheets of coated paper – 2.84 0.14 2.98 7.6.1.11.
5 and 6 fold folding of 1000 sheets of coated-4.22 0.21 4.43 7.6.2.
using the pliable car N 5090:7.6.2.1.
1 fold folding-ofsetpapīr 1000 sheets of 1.69 0.08 1.77 7.6.2.2.
2 fold folding-ofsetpapīr 1000 sheets of 1.92 0.10 2.02 7.6.2.3.
3 fold folding-ofsetpapīr 1000 sheets of 2.84 0.14 2.98 7.6.2.4.
4 fold folding-ofsetpapīr 1000 sheets of 3.02 0.15 3.17 7.6.2.5.
5 and 6 fold folding-ofsetpapīr 1000 sheets of 4.22 0.21 4.43 7.6.2.6.
pressing of 1000 sheets ofsetpapīr-1.23 0.06 1.29 7.6.2.7.
1 fold folding of 1000 sheets coated 1.83 0.09 1.92 – 7.6.2.8.
2 fold folding of 1000 sheets of coated-2.11 0.11 2.22 7.6.2.9.
3 fold folding of 1000 sheets coated 3.02 0.15 3.17-7.6.2.10.
4 fold folding of 1000 sheets coated 3.23 0.16 3.39 – 7.6.2.11.
5 and 6 fold folding of 1000 sheets of coated-4.22 0.21 4.43 7.6.2.12.
change the format 1 time 4.00 0.20 4.20 7.6.3.
sheet folding by hand: 7.6.3.1.
1 fold folding-ofsetpapīr 1000 sheets of 14.06 0.70 14.76 7.6.3.2.
2, 3, 4 – ofsetpapīr will fold folding 1000 paper 56.35 2.82 59.17 7.6.3.3.
5, 6, 7 – the ofsetpapīr fold folding 1000 paper 140.8 7.04 147.84 7.6.3.4.
1 fold folding of 1000 sheets of coated-20.14 1.01 21.15 7.6.3.5.
2, 3, 4 fold folding of sheet coated paper-1000 84.50 4.22 88.72 7.6.3.6.
5, 6, 7 fold folding coated 1000 sheets of 211.24 10.56 221.80-7.7.
Sheet collation: 7.7.1.
1-10 sheets folded 1000 PCs.
7.7.2 23.45 1.17 24.62.
11-20 sheets folded 1000 PCs.
7.7.3 65.03 3.25 68.28.
21 and more folded sheets 1000 PCs.
7.7.4 120.69 6.03 126.72.
place the covers 1000 PCs.
31.29 1.56 32.85 7.8.
General pārpoligrāfisk of the production control: 7.8.1.
two-sided print: 7.8.1.1.
1 color 1000 sheets 3.92 0.20 4.12 7.8.1.2.
2 colors of 1000 sheets 4.69 0.23 4.92 7.8.1.3.
4 colors 1000 sheets 5.53 0.28 5.81 7.8.2.
single-sided printing: 1000 sheets 7.8.2.1.
1 color 1000 sheets 3.84 0.19 4.03 7.8.2.2.
2 colors of 1000 sheets 4.23 0.21 4.44 7.8.2.3.
4 colors 1000 sheets 4.69 0.23 4.92 7.9.
Cutting of finished products: 7.9.1.
ofsetpapīr: 7.9.1.1.
clip from 4 sides 1000 sheets 2.46 0.12 2.58 7.9.1.2.
clip from 4 sides and cutting the 2 parts 1000 sheets 2.77 0.14 2.91 7.9.1.3.
clip from 4 sides and cutting 4 parts 1000 sheets 2.92 0.15 3.07

7.9.1.4. clipping from 4 sides and cutting parts 6-8 sheets 3.23 0.16 3.39 7.9.1.5 1000.
clip from 4 sides and cutting more than 8 parts 1000 sheets 3.77 0.19 3.96 7.9.2.
coated paper: 7.9.2.1.
clip from 4 sides 1000 sheets 2.69 0.13 2.82 7.9.2.2.
clip from 4 sides and cutting the 2 parts 1000 sheets 2.92 0.15 3.07 7.9.2.3.
clip from 4 sides and cutting 4 parts 1000 sheets 3.38 0.17 3.55 7.9.2.4.
clip from 4 sides and cutting parts 6-8 sheets 3.69 0.18 3.87 7.9.2.5 1000.
clip from 4 sides and cutting more than 8 parts 1000 sheets 4.30 0.22 4.52 7.10.
Book gluing: 7.10.1.
using bonding machine Eurobind: 7.10.1.1.
spine thickness up to 1 cm 1000 EC.
7.10.1.2 42.25 2.11 44.36.
spine thickness of 1-1,5 cm 1000 EC.
46.94 2.35 49.29 7.10.1.3.
spine thickness 1.5 cm above 1000 EC.
7.10.2 52.81 2.64 55.45.
using bonding machine Fostbind: 7.10.2.1.
spine thickness up to 1 cm 1000ek.
70.41 3.52 73.93 7.10.2.2.
spine thickness of 1-1,5 cm 1000 EC.
84.5 4.22 88.72 7.10.2.3.
spine thickness 1.5 cm above 1000 EC.
130.00 6.50 136.50 7.11.
Ready to book and brochure from the crop 3 parties: 7.11.1.
using 3 knife cutting machine 1000 EC.
6.15 1.31 6.46 7.11.2.
using 1 knife cutting machine 1000 EC.
21.37 1.07 22.44 7.12.
Product packing: 7.12.1.
maps, books, 1000 PCs.
4.45 0.22 4.67 7.12.2.
form 1000 PCs.
0.12 0.01 0.13 7.13.
Copy the shape 1 piece.
5.90 0.30 6.20 7.14.
Reprography and project implementation: 7.14.1.
the pārpoligrāfisk cover art of expenditure development expenditure 1 cover 139.37 6.97 146.34 7.14.2.
Book facing artistic concept 1 concept 40.65 2.03 42.68 7.14.3.
technical layout 1 p.
7.14.4 1.43 0.07 1.50.
preparing images for color separations (scanning, processing): black and white: 7.14.4.1.
to A5 format picture 1 7.14.4.2 0.95 0.05 1.00.
up to A4 format picture 1 7.14.4.3 1.91 0.10 2.01.
up to A3 format picture 1 color: 3.34 0.17 3.51 7.14.4.4.
to A5 format picture 1 7.14.4.5 1.91 0.10 2.01.
up to A4 format 4.30 0.22 4.52 7.14.4.6 picture 1.
up to A3 format 1 image 6.68 0.33 7.01 7.14.5.
projects in development: 7.14.5.1.
the author's work (p. 1-1800 characters) 1 p.
7.14.5.2 7.55 0.38 7.93.
a technical editor working 1 book 203.25 10.16 213.41 7.14.5.3.
the work of Latvian language Editor (p. 1-1800 characters) 1 p.
7.14.5.4 2.32 0.12 2.44.
language Editor's work in foreign languages (p. 1-1800 characters) 1 p.
3.48 0.17 3.65 7.14.5.5.
the work of Latvian language proofreader (1 p. – 1800 characters) 1 p.
1.74 0.08 1.82 7.14.5.6.
proofreader jobs in foreign languages (p. 1-1800 characters) 1 p.
2.90 0.14 3.04 7.14.5.7.
interpreters work on Latvian language (p. 1-1800 characters) 1 p.
8.13 0.41 8.54 7.14.5.8.
the interpreter's job to a foreign language (p. 1-1800 characters) 1 p.
9.87 0.49 10.36 note.
Price list of the services mentioned in part II of the value added tax rate of 5% applied in accordance with the law "on value added tax" article 6.2.
 
In place of the Minister of defence, Minister of finance Spurdziņš o.