Amendments To The Cabinet Of Ministers Of 29 April 2003, Regulations No. 235 "mandatory Drinking Water Safety And Quality Requirements, Monitoring And Control Arrangements"

Original Language Title: Grozījumi Ministru kabineta 2003.gada 29.aprīļa noteikumos Nr.235 "Dzeramā ūdens obligātās nekaitīguma un kvalitātes prasības, monitoringa un kontroles kārtība"

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now

Read the untranslated law here: https://www.vestnesis.lv/ta/id/175676

Cabinet of Ministers Regulations No. 342 in Riga, 19 May 2008 (pr. No 31 33) amendments to the Cabinet of Ministers of 29 April 2003 regulations No. 235 "mandatory drinking water safety and quality requirements, monitoring and control procedures," Issued under the food surveillance law article 4, second and fourth and fifth paragraph of article 19 to make a Cabinet of 29 April 2003 regulations No. 235 "mandatory drinking water safety and quality requirements, monitoring and control arrangements" (Latvian journal , 2003, nr. 81; 2005, nr. 197; 2006 4. nr.; in 2007, 54 no) the following amendments: 1. Replace the text, the words "the national sanitary inspection" (fold) with the words "health inspection" (fold).
2. Express 28. the fourth sentence as follows: "the water supplier and the operator can monitoring programme will also include a water test results of water suppliers and merchants made self-control system a check the rules referred to in paragraph 37 of the laboratory methods used, if it complies with this provision in paragraph 37 and 38."
3. Replace paragraph 38:3.1 the designation "standard LVS EN ISO 5667-3:2004" with the designation "standard LVS EN ISO 5667-3:2007";
3.2. standard designation "EN ISO 5667-5:2006" with the terms "standard EN ISO 5667-5:2007".
4. Replace subparagraph 1.3 of annex 3 standard designation "EN EN 12780:2003" with a standard designation "EN EN 12780:2007".
5. Replace paragraph 1.6 of annex 3 standard designation "EN EN 26461-2:1993" with "EN standard EN 26461-2:2007".
6. Express 3.3 and 4 of the annex to the note as follows: "3 EN ISO 5725-1:2006 + TC1" methods of measurement and the accuracy of the results (the veracity and accuracy of results) – part 1: General principles and definitions ", EN ISO 5725-2:2006 + TC1" measurement methods and results accuracy (accuracy and precision) – part 2: basic method the reference methods of measurement for the determination of repeatability and reproducibility ", EN ISO 5725-3:2006 + TC1" methods of measurement accuracy (accuracy and konverģentum) – part 3 : The reference methods of measurement accuracy will suffer ", EN ISO 5725-4:2006" of the methods of measurement accuracy (accuracy of the results and konverģentum) – part 4: determination of the accuracy of standartmērījum of Vienmetod of the basic methods ", EN ISO 5725-1:2006 + EYE" of the methods of measurement accuracy (accuracy of the results and konverģentum) – part 5: alternative methods of measuring the precision of standard method for the determination of "EN ISO 5725-1:2006 + TC1" measurement methods and results accuracy (accuracy and precision)-part 6: the value of accuracy in practice "– the use of systematic error that is measured as the difference between the true value of the indicator, and a large enough number of repetitions of the analysis the average size.
4 EN ISO 5725-1:2006 + TC1 "methods of measurement and the accuracy of the results (the veracity and accuracy of results) – part 1: General principles and definitions", EN ISO 5725-2:2006 + TC1 "measurement methods and results accuracy (accuracy and precision) – part 2: basic method the reference methods of measurement for the determination of repeatability and reproducibility", EN ISO 5725-3:2006 + TC1 "methods of measurement accuracy (accuracy and konverģentum) – part 3: measurement methods of precision", will suffer EN ISO 5725-4:2006 "of the methods of measurement accuracy (accuracy of the results and konverģentum) – part 4 Vienmetod of the accuracy of the standartmērījum: detection methods ", EN ISO 5725-1:2006 + EYE" of the methods of measurement accuracy (accuracy of the results and konverģentum) – part 5: alternative methods of measuring the precision of standard method for the determination of "EN ISO 5725-1:2006 + TC1" measurement methods and results accuracy (accuracy and precision)-part 6: using values of accuracy in practice "– random error, which is expressed as the standard deviation (within a group or between groups) of the medium-size in the set. Acceptable precision is twice the standard deviation. " Prime Minister i. Godmanis Health Minister, Minister of Foreign Affairs Mr Riekstins