The text is not in the original format.
Go back
COUNTRY NEWS
REPUBLIC OF INDONESIA
| No. 1050, 2013 |
MINISTRY OF FORESTRY. Job Areal Line. -KPH. KJDTK. The arrangement. Revocation. |
MINISTER FOR FOREST MINISTER OF INDONESIA
NUMBER P. 43/Menhut-II/2013
ABOUT
BOUNDARY ALIGNMENT OF THE LAND UTILIZATION PERMIT WORK,
THE PRINCIPLE APPROVAL OF THE USE OF FOREST AREAS,
THE PRINCIPLE AGREEMENT FOR THE RELEASE OF FOREST AREAS AND
FOREST AREA MANAGEMENT IN THE MANAGEMENT UNIT
FOREST AND FOREST AREA WITH SPECIAL PURPOSE
BY THE GRACE OF ALMIGHTY GOD
MINISTER OF FORESTRY REPUBLIC OF INDONESIA,
Weigh: a. that under the Ordinance of the Ministry of Forestry Number P. 19/Menhut-II/2011 has established the provisions of the areal limits of the forest monitoring permit work;
b. that the Ordinance of the Minister of Forestry as defined in the letter a, has not yet set the limits of the forest area to be released, the use of forest areas and the management of forest areas in the Forest Management and Forest Area with Special Purpose
c. that under consideration as referred to in the letter b, need to establish the Minister of Forestry Regulation on the Alignment Of The Boundary Of The Forest's Expediency Permit, The Approval Principle Of The Use Of The Forest Area, Approval Of The Principle Of Release Forest Area and Forest Area Management on Forest Management and Forest Areas With Special Purpose;
Remembering: 1. Law No. 41 of 1999 on Forestry (sheet of state of the Republic of Indonesia in 1999 Number 167, Additional Gazette of the Republic of Indonesia No. 3888), as amended by Law No. 19 of 2004 on Redemption Rule Number 1 of the Year 2004 Act on Change of Law Number 41 of 1999 on Forestry Act of 2004 Law Number 86, Additional Gazette of the Republic of the Republic of Indonesia Indonesia Number 4412);
2. Law No. 32 Year 2004 on Regional Governance (Sheet State Republic Indonesia Year 2004 Number 125, Supplementary Sheet Republic Indonesia No. 4437), which has been changed several times last by Act No. 12 2008 About The Second Change Of The Law Number 32 Of 2004 On Local Government (sheet Of State Of The Republic Of Indonesia 2008 Number 59, Additional Gazette Of The Republic Of Indonesia Number 4844);
3. Law No. 26 Year 2007 on Alignment Of Spaces (State Sheet Of The Republic Of Indonesia Year 2007 Number 68, Additional Gazette Republic Indonesia Number 4725);
4. Government Regulation No. 44 Year 2004 on Forestry Planning (State Of The Republic Of Indonesia 2004 Number 146, Additional Gazette Republic of Indonesia Number 4452);
5. Government Regulation No. 6 Year 2007 on Tata Forest and Drafting Forest Management Plan, as well as Forest utilization (Republic of Indonesia Gazette 2007 No. 22, Additional Gazette Republic of Indonesia Number 4696), as has been amended by Government Regulation No. 3 of 2008 (State Gazette of the Republic of Indonesia 2008 No. 16, Additional Gazette of the Republic of Indonesia No. 4814);
6. Government Regulation Number 38 Year 2007 on the Partition of Government Affairs Between the Government, Provincial Local Government, and the District/City Local Government (Indonesian Republic of 2007) Number 82, additional State Sheet Republic of Indonesia No. 4737);
7. Government Regulation No. 10 Year 2010 on the Tata Cara Change Peruntukan and the Functions of the Forest Area (State Sheet of Indonesia Year 2010 Number 15, Additional Gazette Republic of Indonesia No. 5097), as amended by Government Regulation No. 60 Of 2012 (sheet Of State Of The Republic Of Indonesia Year 2012 Number 139, Additional Gazette Of The Republic Of Indonesia Number 5324);
8. Government Regulation No. 15 Year 2010 on the Hosting Of Space (Sheet State Of The Republic Of Indonesia 2010 Number 21, Additional Sheet Republic Of Indonesia Number 5103);
9. Government Regulation No. 24 Year 2010 on the Use of Forest Areas (State Sheet Indonesia Year 2010 Number 30, Additional Gazette Republic of Indonesia Number 5112), as amended by Government Regulation No. 61 2012 (sheet State of the Republic of Indonesia Year 2012 Number 140, Extra Gazette of the Republic of Indonesia No. 5325);
10.Regulation Presidential Decree No. 47 of 2009 on the Establishment and Organization of the Ministry of State, as amended with the Presidential Regulation Number 91 of 2011;
11 Presidential Decree No. 84 /P of the Year 2009 on the Establishment of the United Indonesia Cabinet II, as amended by Presidential Decree Number 59 /P of the Year 2011;
12.2014 Presidential Decree No. 24 of 2010 on Occupation, Duty, and Functions of the Ministry of State as well as the Organizational Functions, Duty, and Functions of Eselon I, as amended by the Presidential Regulation No. 92 of 2011;
13.Regulation Forestry Minister Number P. 40/Menhut-II/2010 on the Organization and Work Order of the Ministry of Forestry (News of the State of the Republic of Indonesia 2010 No. 405), as amended by the Regulation of the Minister of Forestry Number P. 33/Menhut-II/2012 (State News of the Republic of Indonesia 2012 Number 779);
14.Regulation Minister Forestry Number P. 47/Menhut-II/2010 on the Committee on the Alignment Of The Forest Area Boundary (State News of the Republic of Indonesia 2010 Number 551);
15.Regulation Minister Forestry Number P. 44/Menhut-II/2012 on the Strengthening Forest Area (News of the Republic of Indonesia 2012 Number 1242);
DECIDED:
Establish: Minister of Forestry Regulation on the structuring of the limits of the area of forest utilization permit, the approval of the principle of use of forest areas, the approval of the principle of the release of forest areas and the management of forest areas in forest management units. AND THE FOREST AREA WITH SPECIAL PURPOSE.
SAB I
UMUM PROVISIONS
Section 1
In the Regulation of the Minister this is referred to by:
1. Forest utilization permit is a permit issued by the Minister, consisting of the permit for the use of the region, the permit for the use of the environmental services, and the permit for the use of the wood and/or non-timber forest products, in the forest area that has been used. Determined.
2. The principle agreement of the use of the forest area is a written statement from the Minister that contains the consent of the application of a portion of the forest area for the benefit of development outside of forestry activities without altering the function and the Forested the forest area.
3. The principle agreement of the release of the forest area is a written statement from the Minister that contains the approval of the application for the release of the forest area to be used for development outside of forestry activities.
4. The forest area manager is the Forest Management Unit (KPH) and the Forest Area permit holder with Special Purpose (KHDTK).
5. Forest Area With Special Purpose (KHDTK) is a forest area that can be a conservation forest, protected forest, or a specially designated production forest by the Minister for research and development purposes, education and exercise, as well as for social, religious, and cultural interests by not changing the underlying function of the forest region in question.
6. Forest Management Service (KPH) is the area of forest management as per the principal and sustainable function that can be managed efficiently and lestari.
7. Areal Work is an areal burdened forest utilization permit, approval of the principle of use of forest areas, approval of the principle of clearing forest area and the management of forest areas in KPH and KHDTK.
8. Areal management is a forest area that is under the management of KPH or KHDTK.
9. The boundary of the forest area is the boundary between the forest area by not the forest area or the boundary between the forest area functions.
10.Limits alone is a work areal limit that does not border any other area of work.
11.Limits of communion is the work area boundary that borders the other area of work.
12.Citra sensing far away is an image recorded by a camera or other sensor.
13.Image of high resolution remote sensing is a remote sensing image with less or equal image precision with 5 (five) meters.
14.A map of the boundary alignment work is a map compiled through the activities of the ploting area of work according to the Ministerial Decree of the Minister/Approval of the Minister to the base map with a larger scale describing the boundary and position of the head-pal boundary which would be On the ground.
15.Trayek boundary is the description of the deliniation of the boundary arrangement that contains the distance and azimuth from a point/point to the next measuring point or the coordinates to be performed on the field and marked by the boundary mark.
The 16.Plan Limit Plan is a plan that contains the basis of execution, the technical description of the azimuth, the distance or coordinates of the position of the boundary pal and other information such as the bond point based on the boundary map work map.
17.Penal alignment is an activity that includes border rinting, border pairing, boundary measurement, creation and news signing of the event execution.
18.Rintis boundary is a line/line made by cutting off a shrub as wide as 1 (1) meter or more.
A 19.Pal limit is a fixed boundary sign with a specific size made of concrete material with an iron frame or from a grade I/II class wood or other boundary mark mounted along the boundary of the boundary.
20.News The Limits Event is news of the event about the outcome of the implementation of the boundary.
21.Maps The Boundary alignment is a map that describes the position of the boundary-pal boundary that has been installed in the field which is the Event of the Event of Boundary Event.
A work area is the designation of a work area as a result of the execution of a boundary arrangement containing the layout, boundary, area, specific functions and points of the boundary coordinates listed in the Decree of the Minister and the Map of its Lamps.
23.2 KPH region is the passage of the KPH region in the forest area by the Minister.
24.Maintenance is an event that is performed regularly with the aim of keeping the limits physically good.
25.7% is an activity that is held continuously in order to keep the boundary mark from the damage and loss of the boundary mark.
26.Orientation limits are activities to obtain data on the state of the boundary conditions and the boundary is the basis for implementation of the reconstruction of the boundary.
27.Reconstruction limits are the measurement and installation of the boundary and the creation of a reboundary projection with the intention of returning the boundary mark and the boundary line according to the position on the boundary-alignment map.
28.Minister is a minister in charge of duty and responsible in the field of forestry.
29.Director General is the Director-General of the Planology of Forestry.
A 30.Panitia boundary arrangement is a committee formed by the governor to conduct a regional boundary arrangement in each district/city.
31.Hall is the Forest Area Chain Hall.
32.Licensee's utilization permit is the person/body of the law granted permission from the authorized officials to use the forest area.
33,Licensee's approval of the principle of the use of the forest area is the leadership of the istance/legal entity given by the Minister for the application of the forest area for the benefit of development outside of forestry activities.
34,Licensee's approval of the principle of the release of the forest area is the authority of the agency or the legal entity given by the Minister for the release of the forest area
A special purpose is the institution of a forest area or a legal entity authorized to administer a forest area with special purpose.
AB II
SCOPE
Section 2
(1) The work area limit consists of:
a. a limit of its own; and/or
b. Alliance limit.
(2) The limits of the work area as referred to in paragraph (1) are:
a. Some or entirely of the outer boundary of the forest area;
b. partially or entirely of the forest region function limits; and/or
c. It is entirely not an external boundary and the boundary function of the forest area.
Section 3
The boundary boundary arrangement of the work is at once an outer boundary of the forest area:
a. Stage of execution following the layout of the forest region's vaporization;
(b) The result of the execution of the Forest Area Limit Event and the map of attachments signed by the Border Boundary Committee, as the boundary of the forest area which is at once an area of the work area.
Section 4
The boundary boundary arrangement of the work is at once a boundary function of the forest region:
a. Stage of execution following the layout of the forest region function boundary;
b. result of implementation of the Forest Service Boundary Functions Event and the attachment map signed by the Functional Boundary Arrangement Committee, as the limit of the function of the forest area which is at once an area of work area.
SAB III
WORKING AREAL BORDER ALIGNMENT
Part One.
General
Section 5
(1) Licensee's authorized use of the Program, as well as the use of the Program, Licensee may not use the Program for any other purpose, including, without limitation, any copyright or other information that is provided by the Program. Forest utilization permits, approval of the principle of use of forest areas, approval of the principle of the release of forest areas and/or management of forest areas.
(2) The work of the work areal limit is performed through stages:
a. create a new version of this file.
b. Border-based instruction creation;
c. Border measurement and installation of the limits of the Program;
d. mapping the results of the alignment;
e. creation and signing of event news and map of the border results;
f. reporting to the Minister.
(3) The use of the working area limits on the Permit Maintenance Maintenance Permit of the People's Plant Forest (IUPHHK-HTR) and/or the Communal Forest Forest Forest (HKm) Permit Maintenance Permit (HKm), is governed by its own Minister Rule.
Second Part
Preparation
Paragraph 1
Border Alignment Plans
Section 6
(1) Licensee's authorized use of the Cloud Service, as well as the terms of the IBM International Program License Agreement for Non-Governing Law, Licensee may not use the Program to provide the following: (1) forest use, or (1) the following: The concept of a boundary arrangement plan and the concept of a boundary arrangement work map, to the Director of the Strengthening, the Penatagunaan and the Tenurial of the Forest Area.
(2) The concept of a boundary arrangement plan as referred to in paragraph (1), is based on the concept of a boundary-setting work map.
(3) The concept of a border setting map as referred to in paragraph (2) is compiled with the provisions:
a. carried out the areal boundary projection permit forest utilization, areal approval of principle, and/or areal administered and the boundary of the forest area into a minimum scale map of 1:100,000 by using satellite imagery of very high resolution.
b. in terms of remote sensing imagery the very high resolution is not available used remote sensing imagery/remote sensing image interpretation map available.
c. The base map as referred to in letter a includes:
1. Indonesian Earth map (RBI);
2. Indonesia Beach Environment map;
3. National Marine Environment Map; and
4. Other basic maps published by the authorized instance.
(4) The concept of a limit set up work map as referred to in paragraph (3):
A: the limits of the forest area that have been cemested/set out limits;
b. map the results of the perizinan border arrangement in the field of forestry;
c. Third-party rights acquired/owned by individuals or legal entities in the possession or possession of land acquired under the provisions of the laws of the laws; and
d. settlement, land directed by the people in the definitive village that has been given the decision of the official authorities.
(5) In assessing the facts of third-party rights and settlements, land-directed land as referred to in paragraph (4) of letters c and letter d other than based on evidence in accordance with laws, use of data and information:
a. The remote sensing image of the intermediate resolution to very high;
b. map interpretation image remote sensing;
c. Indonesian Earth map (RBI);
d. a thematic map, e.g. land use map; or
e. map the results of the perizinan border arrangement in the field of forestry.
(6) The concept of the boundary arrangement work map as referred to in verse (4) describes the entire area of forest utilization permit, principle approval, and forest area management area.
Paragraph 2
Assessment and Alignment of the Boundary Plan
Section 7
(1) The Director of the Strengthening, the Penatagunaan and Tenurial Region of the Forest in the most prolonged period of 10 (ten) working days since receiving the concept of the arrangement of the boundary as referred to in Article 6 of the paragraph (1), coordinating the assessment of the plan of the arrangement limits with Eselon I relating to the scope of the Ministry of Forestry, local government and holder of forest utilization permit, the approval of the principle of use of forest areas, the approval of the principle of the release of forest areas and the managers of KPH and KHDTK.
(2) In the event of a limit arrangement plan may be decided in judgment as referred to in paragraph (1), Director of Strengthening, Penatagunaan and Tenurial Forest Region on behalf of the Director General in the most prolonged period of 7 (7) business days since It is an assessment, authoring, and delivering a plan for setting boundaries and a map of working area arrangement work to the Head of Hall and the holder of forest utilization permit, the approval of the principle of use of forest areas, the approval of the principle of release forest area or the management of KPH and KHDTK.
(3) In the event of a limit arrangement plan cannot be decided in the assessment of the boundary arrangement plan as referred to in paragraph (1), Director of the Strengthening Of the Forest Area within 7 (seven) business days since the assessment, Request approval to the Director General.
(4) The Director General for a term of seven (seven) days of work since the acceptance of the plan of the boundary as referred to in verse (3), issuing approval or rejection of the arrangement of the boundary arrangement.
(5) In the event of a boundary arrangement plan approved by the Director General, Director of the Strengthening, Penatagunaan and Tenurial Forest Region on behalf of the Director General for the longest term of 7 (seven) working days to pass and deliver a plan of the arrangement limits and work maps of the working area boundary alignment to the Head of Hall and the holder of forest utilization permit, the approval of the principle of use of forest areas, the approval of the principle of the release of forest areas or the management of KPH and KHDTK.
(6) In the event of a boundary arrangement plan not approved of the Director General, Director of Strengthening, Retaining and Tenurial Forest Region in the most prolonged period 7 (seven) days of work relayed the plan of setting boundaries and a working map of the arrangement Area limits work to permit holders of forest utilization, approval of the principle of use of forest areas, the approval of the principle of the release of forest areas or the managers of KPH and KHDTK, with the suggestion of improvement.
Third Part
Border Alignment
Paragraph 1
The creation of a Managing Team and Drafting The Work Instruction
Section 8
(1) Implementation of the areal boundary arrangement of forest utilization permit, the approval of the principle of use of forest areas, the approval of the principle of the release of forest areas or the management of KPH and KHDTK, coordinated by the Head of the Hall.
(2) The implementation of the boundary alignment as referred to in paragraph (1) may be performed by the use of the forest utilization permit, the approval of the principle of use of the forest area, the approval of the principle of the release of the forest area or the management of KPH and KHDTK itself or designate a managing partner with a competency in the field of measurement and mapping.
Section 9
(1) The Head of the Hall in the most prolonged period 7 (seven) days of work since receiving the plan of setting boundaries and a work map of the area of the area of the use of forest utilization permit work, the approval of the principle of use of forest areas, approval of the principle of release the forest area or the management of KPH and KHDTK as referred to in Article 7 of the paragraph (2) and paragraph (5):
a. create an areal border setting instruction;
(b), and (b) the following:
c. provide a notification to the Provincial Government and the District/City on the implementation of the working areal boundary arrangement.
(2) The work instructions as referred to in paragraph (1) of the letter a drafted under the Passed Boundary Arrangement Plan and contains:
a. base execution;
b. list of objects;
c.
d. measurement methods;
e. set up the creation, numbering and presumpting of the border pal;
f. order; and
g. reporting.
(3) The acting team as referred to in paragraph (1) of the letter b, consisting of an element:
a. Hall as a supervision and a supervisor;
b. Provincial Service that guides the foresight as a technical guide;
c. County/City Services that are forestuing foresight as a technical guide;
(d) Licensee's use of the Program (s), Licensee's authorized use of the forest region, the holder of the use of the forest area, and/or the manager of a forest area or partner as executor;
e. Subdistrict and/or Village/Kelurahan as a companion; and
(f) Licensee's use of forest utilization, holders of the principle of the use of forest areas, holders of the principle approval of the forest area, and/or the forest area manager as witnesses.
Paragraph 2
[Managing Team]
Section 10
(1) Supervision as referred to in Section 9 of the (3) letter a in charge of the assessment of the plan and the outcome of the work areal limit.
(2) The Supervising as referred to in Article 9 of the paragraph (3) of the letter of duty:
a. conduct a test of the feasibility of a measuring device that is used;
b. perform surveillance on the execution of a boundary arrangement with a test, which is:
1. bonding point,
2. The starting point and the endpoint,
3. P limit and rintis limit with a widest of at least 10% (ten per hundred) and are dispersed proportionally.
c. reporting to the Head of the Hall if there is a conflict of work instructions with the field state to obtain a decision;
d. sign the news of the event surveillance event the execution of the arrangement;
e. perform corrective actions according to the work instructions; and
f. create a report of the implementation of the boundary alignment.
(3) Technical guidance as referred to in Article 9 paragraph (3) of the letter b and c in charge:
a. conduct a workspace for the IBM Cloud Service and the IBM Cloud Service.
b. signed up on the work of the work areal Limits Event.
(4) The Executing as referred to in Section 9 of the paragraph (3) of the letter in charge:
a. execute the work of the workspace limit in accordance with the work instructions and technical provisions of measurement and mapping;
b. create and sign the work of the work areal Limits Event;
c. create a map of the work areal boundary results; and
d. create a report on the work of the work areal limit.
(5) Companion as referred to in Section 9 paragraph (3) of the letter e in charge:
A. perform a distraction in the execution of a work area arrangement and inform the issues that occur in the field concerning the rights of the third party in accordance with the laws of the law; and
b. signed up on the work of the work areal Limits Event.
(6) The witness as referred to in Article 9 of the paragraph (3) of the letter of duty:
a) following the performance of the workspace arrangement for the performance of the implementation of the Cloud Service; and
b. signed up on the work of the work areal Limits Event.
Paragraph 3
Execution of the Alignment
Section 11
(1) Licensee's authorized use of the Cloud Service is not permitted to use any of the following: (1) use of the Program (s), or (2) the following: work areal boundary alignment, longest 7 (seven) business days since the notice of implementation of the boundary alignment of the Hall Head.
(2) The layout of the work areal limits on the field is carried out through activities:
a. binding point;
b. the measurement and determination of the starting point and the end point;
c. border rints;
d. border installation; and
e. limit measurement.
(3) The results of the implementation of the extent of the work areal limits on the field as referred to in verse (2) are poured in the news of the event:
a. binding point;
b. The determination of the starting point and the end point of the boundary arrangement; and
c. Results of the implementation of the arrangement.
(4) The News of the Boundary Event as referred to in verse (3) is signed by the acting team and is known to the Head of the Provincial and District Service/City which is the foresperation of forestry as well as the Head of the Hall.
(5) In the event of execution of the work areal limit executed by more than 1 (one) team then the implementation of the work area arrangement is created in one News Event Event which is a summary of the implementation of the work areal limit Signed by the executor, the use of forest utilization, the approval of the principle of use of forest areas, the approval of the principle of the release of forest areas or the management of KPH and KHDTK as well as the Head of the Hall.
Paragraph 4
Measurement Technical Requirements
Section 12
(1) The limits of the limits and determination of the boundary position are performed using the measuring tool:
a. Theodolite;
b. Global Positioning System (GPS);
c. Total Station (TS);
d. Other tools that meet technical provisions.
(2) a measure of measure by which the Cloud Service can be used.
Section 13
(1) The measurement method uses:
a. polygon compass if using a Theodolite T0 (Theodolite Kompas). The field data obtained is an azimuth magnetically, a sloping distance and a sloping angle;
b. angular polygon if using Theodolite T1 (not Theodolite Kompas). The field data obtained is the direction on a polygon side, sloping distance and angled corners.
(2) To get a flat distance, it can be computed with the formula: d = dm. ♪ Cos 2 α, where: d = flat distance, dm = tilted distance (from the reading of the rambu), and α = angle miring/helling.
(3) The size data that is azimuth, sloping distance and angled angles are recorded in the measuring book other than that the ssneakers of the measurement results in the field must be described at a scale of 1:10,000.
Section 14
(1) Determination of boussole correction:
a. in terms of setting boundaries in the field using the Theodolite T0 (Theodolite Kompas), then before commencing the measurement in the field first needs to be done observations of the sun to determine the magnitude of the boussole correction of the measuring device used;
b. azimuth the meticulous sun is performed with observations of the sun as much as 3 (three) series and each observation series is performed 4 (four) times the measurement is 2 (two) measurements on the position of the upright binoculars (ordinary) and 2 (two) measurements at Binoculars reverse (outstanding);
c. The determination of the boussole correction magnitude to be used, set based on:
1. The average score of 3 (three) observation series, if the count results between series one with the other is not different;
2. Selected one of the observation series that is technically considered the best, if the count results of each observation series are very different away.
d. use of boussole correction:
1. on an artificial boundary arrangement: azimuth-azimuth listed in the work order arrangement plan/instruction must be reduced by the magnitude of the boussole correction, so instead in the description of the size map.
2. on the nature of the natural boundary (river, lake bank, laut/beach, highway, plant boundary) which is essentially traitable in a different field with the plan of setting boundaries and the work instructions for the arrangement of the boundary, then azimuth-azimuth measures the measurement on field (azimuth magnetis) must plus the magnitude of the boussole correction at the calculation time of the coordinates and the depiction of the map.
(2) The initial determination of the azimuth:
a. in terms of the boundary arrangement using the Theodolite T1 (not the Theodolite compass) then on one side of the polygon must be done observations of the sun to determine azimuth from that side. The dots on which the observations of the sun should be performed are adapted to the technical purposes of measurement
b. The determination of the starting point of the extent of the extent of the area of forest utilization permit work/areal work approval work/areal work starts from a specific starting point in accordance with the provisions of the boundary arrangement plan and the boundary alignment work instructions.
Section 15
(1) The measurement of the trajectory of the boundary is performed according to the traject provisions of the boundary arrangement plan and the boundary alignment work instructions.
(2) If using the Theodolite T0 (Theodolite Kompas), in the application of the azimuth-azimuth field listed on the arrangement of the boundary arrangement and the order of the arrangement work must be reduced by the magnitude of the boussole correction of the measurement tool, It is also the opposite of the time of its coronation.
(3) The orientation measurement is performed to find out and compare the state above the work map with the state in the field.
(4) The measurement of the orientation as referred to in verse (3) which is performed by the polygon compass method, performed the measurement of radiating or recuperation to the face.
(5) The measurement of the border subjects by using GPS is set in technical instructions.
Section 16
In terms of heavy field conditions between the other steep, deep swamps that cannot be measured in accordance with the rules of the boundary of the boundary arrangement plan and the arrangement of the boundary arrangement work can be carried on a soaring measurement.
Section 17
Font writing and border number:
a. on the side of the border facing the area of forest utilization permit, approval of the principle or maintainer of the forest area is written by the initials of the three letters of the name of the forest utilization permit, approval of the principle of use of the forest area, consent the principle of forest area release or the management of the KPH and the KHDTK concerned;
b. boundary pal numbering written under the initials of the name for the use of forest utilization permit, the principle approval of the use of forest areas, the approval of the principle of the release of forest area or the management of the concerned KPH and KHDTK;
c. in terms of the boundary boundary of the outer boundary and/or limit of function, the name stands for forest utilization permit holder, the approval of the principle of use of forest areas, the approval of the principle of the release of forest area or the management of KPH and KHDTK and the border number is under the initials and outer boundary number and/or the boundary function of the forest region.
Section 18
Changes in the limits can be made in the field as a result of the rights of third parties that have not yet been set forth on the plan of arrangement and work instruction.
Section 19
(1) Rintis boundary areal work permit forest utilization, approval of the principle of use of forest area, the approval of the principle of forest area release or management of KPH and KHDTK made 2 (two) meters.
(2) The boundary line of an inter-area association of forest utilization permits, the approval of the principle of use of forest areas, the approval of the principle of the release of forest areas or the management of KPH and KHDTK and/or with the function limit is the axis of the boundary. as it is in verse (1).
(3) The boundary signs are installed on the field of pal boundary and the announcement board with the initials the name of the forest utilization permit, the principle approval of the use of the forest area, the approval of the principle of the release of forest area or the management of KPH and KHDTK and numbered labpal number.
(4) Pal the limit as referred to in verse (3) is made of a local I/II class of awet wood shaped cylinder with a diameter of 15 cm-20 cm, ± 150 cm long including the planted section ± 50 cm, the top of the ± 10 cm section of the color painted color The red and the next part are covered by a 15 cm square-shaped neck.
(5) Writing the traject font code and the numbering of pal the boundary facing towards the threshold.
(6) The announcement board as referred to in verse (3) is made in four rectangles a size of 20 cm x 30 cm from a thick zinc plate painted yellow that reads the name of the forest utilization permit, approval principle usage of the region forests, the approval of the principle of the release of forest areas or the management of KPH and KHDTK which face the outside of the work area concerned.
(7) The board of the announcement as referred to in paragraph (6) is installed in places of strategic importance.
(8) In terms of the work area and is the outer boundary or boundary of the forest area function, the shape and size of the boundary of the boundary follows the provisions of the forest region boundary by adding the initials of the utilization permit holder. Forests, the approval of the principle of use of forest areas, the approval of the principle of the release of forest areas or the management of KPH and KHDTK and the number-of
BAB IV
REPORTING
Section 20
(1) Licensee's use of the Program may only be used as part of the Program for the purpose of the Program. boundaries, required to create and deliver reports of the results of the boundary arrangement to the Director of the Strengthening Of The Forest Area and the Tenurial.
(2) The creation and delivery of the report as referred to in paragraph (1) is coordinated by the Head of the Hall.
(3) The report of the result of the boundary arrangement as referred to in paragraph (1) is compiled with systematics:
BAB I Preliminary.
BAB II Location and Physical Situations.
BAB III Execution:
A. Base Implementation;
B. Power and Appliances;
C. The Implementation Of The Boundary Arrangement.
BAB IV Result Execution
A. Correction Boussole;
B. Limit Alignment Results;
1. Limit length;
2. The number of Restricted Services
3. Long Range Rints;
4. The coordinates of the Shift Point or Strategic Places;
5. Areal Areal Work Alignment Result.
BAB V Conclusion and Suggestions.
(4) The report as referred to in paragraph (3) is equipped with a document:
a. Limit Plan;
(b), and (b) the following:
c. Task Order Letter;
d. Event and Map implementation of the Program;
e. Sun observations and the Boussole Correction Count;
f. List of border coordinate coordinates and coordinate point coordinates.
Section 21
The report of the work area arrangement of the work area as referred to in Article 20 of the paragraph (3) is delivered by the Head of the Hall to the Director General through the Director of the Confirmation, the Penatagunaan and the Tenurial Region of the Forest, for:
a. Assessment and assignment of work areas for setting the forest utilization permit or management of KPH and KHDTK;
b. the process of publishing the use of the forest area or the release of the forest area for the arrangement of the principle of approval of the use of forest areas or the approval of the principles of forest release.
Section 22
A further provision of the implementation of the work areal boundary arrangement as referred to in Article 11 to Article 19, is governed by the General Director's Regulation.
BAB V
ESTABLISHMENT OF FOREST UTILIZATION PERMIT WORKSPACE, APPROVAL
FOREST AREA ' S PRINCIPLE OF USE, PRINCIPLE APPROVAL
THE RELEASE OF THE FOREST AREA AND THE MANAGEMENT OF THE FOREST AREA AT KPH AND KHDTK
Section 23
(1) Director of the Strengthening, Penatagunaan and Tenurial Forest Region in the most prolonged period 7 (seven) days of work since receiving reports of implementation of the boundary alignment of forest utilization permit holders, the approval of the principle of use of forest areas, The principle agreement for the principle of the release of forest area or management of KPH and KHDTK coordinates assessment with Eselon I relating to the scope of the Ministry of Forestry and the holder of forest utilization, approval of the principle of use of forest areas, approval Forest area release principles or KPH management and KHDTK.
(2) Based on the results of the assessment as referred to in paragraph (1), the Director of the Strengthening Of The Forest Area and the Tenurials of the Forest Region:
A. Return the report to the forest utilization permit holder, the principle approval of the use of the forest area, the approval of the principle of the release of forest area or the management of KPH and KHDTK for improvement, in the case of the report of the arrangement of the boundary There are errors or flaws;
b. with the approval of the Director General delivering the proposal of the issuing of the Minister's Decision on the establishment of the work area to the Secretary General of the Ministry of Forestry, in the event the report of the arrangement of the boundary has complied
(3) Licensee's use of the Program (s) for the purpose of the use of the Program (s): Border alignment report.
(4) The Secretary General of the Ministry of Forestry in the most prolonged period of 10 (ten) business days since accepting the proposal as referred to in paragraph (2) the letter b performing the legal review and conveyance of the Ministerial Decision on the designation The area of forest utilization permits, the approval of the principle of use of forest areas, the approval of the principle of the release of forest areas or the management of KPH and KHDTK and the attachment map to the Minister.
(5) The Minister within a term of 15 (fifteen) business days since receiving the concept of the Secretary General as referred to in paragraph (4) publishes the work of the work areal and the attachment map.
BAB VI
FINANCING
Section 24
(1) The cost of setting limits, maintenance and security limits of the work area is charged to the holder of forest utilization permit, the approval of the principle of use of forest areas, the approval of the principle of the release of forest areas or the management of KPH and KHDTK.
(2) The arrangement of the work area boundary which is at once an external boundary and/or the boundary function of the forest region, calculating the magnitude of the cost according to the standard of cost in the field of forest area reinforcement.
(3) In terms of the extent of the work area that is at once an outside limit and/or the boundary function of the forest region, which has been tabled using government funds then:
a. for the leveling of the boundary of the forest area that has been implemented before 5 (five) years hence the holder of forest utilization, approval of the principle of use of forest areas, the approval of the forest area release principle or the management of KPH and KHDTK mandatory Change the cost of execution of the boundary of the forest area;
(b) for setting the limits of the forest area that has been implemented by 5 (five) years or more, hence the holder of forest utilization, the approval of the principle of use of forest areas, the approval of the principle of the release of forest areas or the management of KPH and KHDTK. carrying out the reconstruction of the forest boundary;
c. calculation of the magnitude of the charge as referred to in the letter a according to the standard of cost in the field of forest area reinforcement;
d. Replacement of the Program to the IBM International Program (s) and the IBM International Program (s).
(4) The cost of performing the orientation and reconstruction of the work area limits as referred to in paragraph (3) is charged to the holder of the forest utilization permit, the approval of the principle of use of the forest area, the approval of the principle of the release of forest Management of KPH and KHDTK.
BAB VII
BORDER MAINTENANCE AND MAINTENANCE
Section 25
(1) Licensee's use of forest utilization, loan permit holder, use forest area or KPH and KHDTK management is required to carry out maintenance and security limits of the work area.
(2) The maintenance and security of the boundary as referred to in paragraph (1) aim for the boundary and the boundary of the border may serve as a reference to the work of the workspace limit.
Section 26
(1) Licensee's use of the forest utilization, use of the forest area or the maintainer of KPH and KHDTK conveyances the results of the maintenance and security of the work area limits as referred to in Section 25 of each year. To the Head Hall.
(2) Against pal boundary areal workspace that cannot be recognized again in the field, forest utilization permit holder, loan permit holder use forest area or KPH and KHDTK maintainers can submit proposals for implementation of orientation and reconstruction limits The work area to the Head Hall.
(3) Orientation and reconstruction of the boundary as referred to in verse (2) is performed by the forest utilization permit holder, use of the forest area or KPH and KHDTK with supervision by the Head of the Hall.
FAR VIII.
SANCTIONS
Section 27
(1) Licensee's authorized use of the Program, as well as the following: (1) Licensee's authorized use of the Program, Licensee may not use the Program for any other purpose, or to use the Program to be used for the Program. as referred to in Section 6, Section 11, and/or Section 20 is subject to administrative sanction of a temporary suspension of the field, while a permit holder of the use of the timber forest results, is charged with a temporary halt. Administrative services.
(2) The sanction as referred to in paragraph (1) shall be revoked after the arrangement of the areal limit of the wristband.
BAB IX
TRANSITION PROVISIONS
Section 28
Against the forest utilization permit holder, the principle approval of the use of forest areas, holders of the principle approval of forest area or KPH and KHDTK maintainers, which have not yet been implemented and/or completed the areal boundary arrangement Work is required to follow this provision.
Section 29
At the time of the Ordinance of the Minister,
a. The results of a work areal border with a decision are stated to remain in effect;
b. the process of setting up the work area is stated to remain in effect until the final stage and the subsequent steps follow the provisions of this Minister's Regulation.
BAB X
CLOSING
Section 30
With the Ordinance of this Minister's Regulation, the Regulation of the Minister of Forestry Number P. 19/Menhut-II/2011 on the Alignment Limit of the Forest Expediency Permit, was revoked and declared to be unapplicable.
Section 31
The rules of the Ministry are effective on the date of the promulgations.
In order for everyone to know, ordered the invitation of the Minister's Regulation with its placement in the News of the Republic of Indonesia.
Set in Jakarta
on August 19, 2013
MINISTER FOR FORESTRY
REPUBLIC OF INDONESIA,
ZULKIFLI HASAN
It's called in Jakarta.
on August 21, 2013
MINISTER OF LAW AND HUMAN RIGHTS
REPUBLIC OF INDONESIA,
AMIR SYAMSUDIN
