onducting the monitoring and evaluation of the implementation of the provisions as referred to in Section 2 and evaluation of the performance of the LSPro and the designated Testing Laboratory as referred to in Article 1.
Section 5
(1) LSPro and the Test Testing Laboratory in violation of the provisions as referred to in Section 2 and Section 3, revoked the appointment.
(2) The judgment of truth over the breach of the provisions as referred to in paragraph (1) is conducted in the assessment meeting of the Institution of Conformity of the Agreement.
Section 6
SPPT-SNI and the Certificate of Test Results (SHU) of the Two Bicycle which had been published on 28 December 2012 until promulcaged by the Regulation of this Minister, respectively by LSPro and the Laboratory of Testing appointed with the Regulation of Ministers The industrial number 148/M-IND/PER/12/2010, stated in effect under this Minister's Regulation.
Section 7
The Regulation of the Minister comes into effect on the date of the promulctest.
For each person to know it, order the invitation of the Order of the Minister with its placement in the News of the Republic of Indonesia.
Specified in Jakarta
on June 13, 2013
MINISTRY OF INDUSTRY
REPUBLIC OF INDONESIA,
MOHAMAD S. HIDAYAT
It is promulred in Jakarta
on 18 June 2013
MINISTER OF LAW AND HUMAN RIGHTS
REPUBLIC OF INDONESIA,
AMIR SYAMSUDIN
Attachment:
bn846-2013
to perform the certification and Bicycle quality testing. Two.
c. that under consideration as referred to in the letter a and the letter b, need to establish the Regulation of the Minister of Industry on the Appointment Of the Institution of Conformance in the Order of the Indonesian National Standard Monitoring and Oversight (SNI) Tricycle Is Mandatory;
Given: 1. Law No. 5 of 1984 on Industry (State Gazette of the Republic of Indonesia in 1984 No. 22, Additional Gazette of the Republic of Indonesia Number 3274);
2. Government Regulation No. 17 Year 1986 on Regulatory Authority, Coaching and Industrial Development (State Sheet of the Republic of Indonesia Year 1986 No. 23, Additional Gazette of the Republic of Indonesia No. 3330);
3. Government Regulation No. 102 Year 2000 on National Standardization (State Sheet of Indonesia 2000 Number 199, Additional Gazette Republic of Indonesia Number 4020);
4. Government Regulation Number 38 Year 2007 on the Partition of Government Affairs Between Government, Provincial Local Government and District/City Government (State Gazette of 2007 Indonesia Number 82, Extra State Sheet) Republic of Indonesia No. 4737);
5. Presidential Regulation No. 47 of 2009 on the Establishment and Organization of the Ministry of State as it has been several times amended last with the Regulation of the President of the Republic of Indonesia Number 91 of 2011;
6. Presidential Regulation No. 24 Year 2010 on Occupation, Duty and Functions of the Ministry of State as well as the Susunan Organization, Duty and Functions of the Ministry of State as it has been several times amended last with the Republic of the Republic Regulation Indonesia Number 92 Year 2011;
7. Presidential Decree No. 78 of 2001 on the National Accreditation Committee;
8. Presidential Decree No. 84 /P Year 2009 on the Establishment of the United Indonesia Cabinet United II Period 2009-2014 as it has been several times amended last by the Decree of the President of the Republic of Indonesia Number 5/P of 2013;
9. Regulation Minister Perindustrian Number 86/M-IND/PER/9/2009 about the Indonesian National Standard of Industrial Fields;
Ten. The Regulation of the Ministry of Industry Number 105/M-IND/PER/10/2010 on the Organization and the Working Governance of the Ministry of Industry;
11. Regulations of the Minister of Industry Number 114/M-IND/PER/10/2010 on the Treatment of Indonesian National Standards (SNI) Bicycle Wheels Two (in Indonesian) Wajerially;
DECIDED:
establish: MINISTRY OF MINISTRY ' S REGULATIONS ON THE APPOINTMENT OF THE INSTITUTION OF CONFORMITY ASSESSMENT IN ORDER OF THE IMPLEMENTATION AND SUPERVISION OF THE INDONESIAN NATIONAL STANDARD (SNI) TRICYCLE IS MANDATORY.
Article 1
Pointing:
a. Product Certification (LSPro) which has been accredited as listed on the letter A of this Minister Regulation Attachment to perform the SNI Certification Two-Wheel Certification; and
b. The Laboratory of Testing which has been accredited as set forth in the letter B of the Regulation of this Minister for the conduct of the Two-Wheel Test.
Article 2
(1) The Test Laboratory as referred to in Article 1 of the letter b is required to test the entire LSPro request as referred to in Article 1 of the letter a and/or technical instance with the same treatment of the interchange LSPro and the technical agencies.
(2) The testing obligation as referred to in paragraph (1) applies to testing for:
a. publishing SPPT-SNI Bicycle Two; dan/or
B. The supervision of the implementation of the application of SNI Bicycle Two is mandatory.
Article 3
(1) LSPro and Test Lab as referred to in Section 1 must report the results of the certification performance and testing to the Director General of the High Technology Based Excellence and the Head of the Policy Review Board, Climate and Industrial Mutu.
(2) The results of the performance results as referred to in paragraph (1) consist of:
a. LSPro obligations to deliver:
1. The issuer of SPPT SNI, periodic supervision of SPPT SNI and the revocation of SPPT SNI Bicycle Two, which must be delivered at least 7 (seven) business days since publishing;
2. Recapitulation of SPPT-SNI publishing, periodic supervision of SPPT-SNI and the revocation of SPPT-SNI Bicycle Two in a period of 1 (one) year, which must be delivered no later than 5 January of the following year; and
3. LSPro; and LSPro; and IBM's IBM Business Process Management
B. Test Lab's obligation to deliver:
1. Certificate of Test Results (SHU) or test results for the Two Wheelchair Testing that have been performed within 1 (one) month, which must be delivered at least the next 5 months;
2. Recapitulation of the Test Results Certificate (SHU) or test results of the Two-Wheel Test which has been performed within 1 (one) year, which must be delivered no later than 5 January of the following year; and
3. The development of the competency, organization and accreditation of the Test Laboratory.
(3) The Directorate General of High Technology-Based Flagship Industries conducts coaching on the two-wheel bike industry which does not meet the provisions of the SNI Bicycle Two Bicycles Two are based on periodic surveillance results as It is in a verse (2) a number one.
Section 4
Head of the Policy Review Board, Climate and Industrial Mutu c
