Advanced Search

Regulation Of The Minister Of Industry Number 02/m-Ind/per/1/2009 In 2009

Original Language Title: Peraturan Menteri Perindustrian Nomor 02/M-IND/ PER/1/2009 Tahun 2009

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.
boratory outside the country as long as it has been have a Mutual Recognition Arrangement (MRA) Agreement with the Board of Accreditation in question, as well as the country in question with the Republic of Indonesia.
.,, (3) Audit of quality management systems as referred to in paragraph (1) letter b based on warranties issued by the Accredited Quality Certification Institute or the Accreditation Agency abroad that has the Agreement for each other. or the Mutual Recognition Arrangement (MRA) with the KAN.

Section 6
The LSPro as referred to in Section 5 reports its certificate of certification to the Director General of Industry Pembina by busan to the BPPI Chief.

Section 7
.,, (1) Sheet Steel and Aluminium Alloy Roll-Seng (Bj.L US) imports entering the Customs Indonesia area are required to meet the provisions of the SNI as evidenced by SPPT-SNI.
.,, (2) Sheet Steel and Aluminium Alloy-Seng (Bj.L) imports that have had SPPT-SNI have to be registered in accordance with the provisions of the laws.

Section 8
The Aluminium and Aluminium Alloy Scrolls (Bj.L AS) imports that do not comply with the provisions as referred to in Article 7 are prohibited from entering into the Indonesian Customs region and must be re-exported or exterminated.

Section 9
.,, (1) The coaching and supervision of the implementation of the application of the SNI Steel Sheet and Aluminium Alloy Layer (Bj.L AS), conducted by the Director General of Industry Pembina executed by PPSP at least 1 (one) times in a year.
.,, (2) In conducting oversight as referred to in paragraph (1) the Director General Pembina Industries can coordinate with the Head of the Provincial Service and or the Head of the District/City Service.
.,, (3) the BPPI chief carries out coaching on the Institution Assessment Institute in order to apply SNI to the product.

Section 10
The Director General of Industry Pembina sets out the technical instructions of the implementation of this Minister Regulation.

Section 11
The perpetrators of the effort that committed the breach to the provisions in the Ministerial Regulation are subject to sanction in accordance with the provisions of the laws.

Section 12
The perpetrator who had owned the SPPT-SNI Steel Sheet and Aluminium Alloy Roll-Seng (Bj.L AS) prior to this Minister's Regulation, must have adjusted the production and SPPT-SNInya based on provisions in this Minister's Ordinance No later than on the effective date of this Minister's Rule.

Section 13
The Minister ' s rules are starting to apply 6 (six) months after the date is set.

In order for everyone to know, the Regulation of the Minister is promulred by its placement in the News of the Republic of Indonesia.

.,, specified in Jakarta
on January 6, 2009
THE MINISTRY OF INDUSTRY RI


FAHMI IDRIS
Promulgated in Jakarta
on January 6, 2009
MINISTER OF LAW AND HUMAN RIGHTS
REPUBLIC OF INDONESIA

ANDI MATTALATA
on of the President of the Republic of Indonesia Number 17 Year 2007;
., 10. The decision of the Minister of Industry and Trade Number 634/MPP/Kep/9/2002 on the Terms and Conditions of the Surveillance of Goods and or Services is circulating in the Market;
., 11. Regulations Minister Perindustrian Number 01/M-IND/PER/3/2005 about the Organization and the Department of Industrial Work;
., 12. The Regulation of the Ministry of Industry Number 19/M-IND/PER/5/2006 on Standardization, Coaching and Supervision of the Indonesian National Standards of Industrial Fields;
., 13. Regulation of Trade Minister Number 14/M-DAG/PER/3/2007 on the Standardization of the Indonesian National Standards of Trade and Supervision (SNI) of the Wajib of Goods and Services which are traded;

DECIDED:

.,, Setting: REGULATIONS MINISTER OF INDUSTRY ON ENFORCING INDONESIAN NATIONAL STANDARDS (SNI) SHEET STEEL AND ALUMINIUM-ZINC ALLOY ROLL (BJ.L US) CONSCRIPTION.

Section 1
In Regulation of the Minister this is referred to:
., 1. The SPPT SNI is the Indonesian National Standard Sign Use Product Certificate.
2. KAN is the National Accreditation Committee.
3. LSPro is the Product Certification Institute.
., 4. The Supervising Officer of the Standard Goods and Services in the Factory (PPSP) is a civil servant in the center or area designated by an industry clerk's letter to conduct surveillance of goods and services in a factory. The SNIs have been in mandatory service.
. .5. Director General Pembina Industries was Director General of the Metal Industry Textile Machine and Aneka Department of Industry.
., 6. The head of the BPPI is the Head of the Industrial Research and Industrial Development Agency.
., 7. The head of the Provincial Service is the Head of the Provincial Service which carries out the duties of government affairs in the field of industry.
., 8. The head of the District/City Department is the Head of District/City which carries out the duties of government affairs in the field of industry.

Section 2
.,, (1) Memberdo National Standard Indonesia (SNI) and or Revised Steel Sheet and Aluminium Alloy Roll-Seng (Bj.L AS) SNI 4096:2007 is conscripted with Number Post of tarif/HS 7210.61.10.00, 7210,61,90.00, 7210. 70.10.00, 7210,70.90.00, 7212.50.10.10 and 7212,50.20.10.
.,, (2) The sheet steel and the aluminium-Seng alloy scroll (Bj.L AS) as referred to in verse (1) is the Steel Sheet and the scroll is coated in a hot dipping way with a zinc aluminium alloy and the rest of the other elements.

Section 3
The Company that produces the Aluminium Alloy and Aluminium Alloy Scroll (Bj.L AS) as referred to in Article 2 of the paragraph (1) is required to apply the SNI with:
., a., a. have the SPPT SNI Steel Sheet and Aluminium Alloy Roll-Seng (Bj.L AS) in accordance with the applicable provisions; and
., b. Sign the mark of the SNI Steel Sheet and Aluminium Alloy Roll-Seng (Bj. US L) on each product with an uneasily lost mark.

Section 4
Aluminium Sheet and Aluminium Alloy Scrolls (Bj.L US) are traded within the country, which are derived from the results of domestic production and or import must meet the provisions of the SNI as referred to in Article 3.

Section 5
.,, (1) The issuer of SPPT-SNI Steel Sheet and Aluminium Alloy Scroll (Bj.L AS) as referred to in Article 3 of the letter a, executed by LSPro which has been accredited by KAN or designated by the Minister of Industry, through:
.,
., a., a. The Test and Aluminium Alloy-Seng (Bj.L AS) Steel Quality testing matches the SNI requirements; and
., b. audit the application of the SNI quality management system 19-9001 2001 /ISO 9001:2000 or its revision or other recognized quality management system.
.,, (2) Testing as referred to in paragraph (1) the letter a may be subcontracted in a test laboratory that has been accredited or designated by the Minister of Industry or subcontracted to a test la