sting to the Director General of the High Technology Based Excellence and the Head of the Policy Review Board, Climate and Industrial Mutu.
(2) The results of the performance results as referred to in paragraph (1) consist of:
a. LSPro obligations to deliver:
1. publishing SPPT SNI, periodic supervision of SPPT SNI and the revocation of SPPT SNI of Low Pressure Regulator for LPG Steel Savings on Low Pressure Regulator for LPG Tabung, which must be delivered at least 7 (7) business days since issuer;
2. Recapitulation of SPPT-SNI publishing, periodic supervision of SPPT-SNI and the revocation of SPPT-SNI Low Pressure Regulator for LPG Steel Savings on Low Pressure Regulator for LPG Savings within 1 (one) year period, which must be delivered No, no, no, no, no, no, no, no, no.
3. LSPro; and LSPro; and IBM's IBM Business Process Management
B. Test Lab's obligation to deliver:
1. Certificate of Test Results (SHU) or test results of the Low Pressure Regulator testing for LPG Steel Tabung on Low Pressure Regulator for LPG Tabung Tabung which has been performed within 1 (one) month, which must be delivered no later than on the next 5 months;
2. Recapitulation of Test Results Certificate (SHU) or test results of Low Pressure Regulator testing for LPG Steel Tabung on Low Pressure Regulator for LPG Tabung Tabung which has been conducted within 1 (one) year, which must be delivered No, no, no, no, no, no, no, no, no.
3. The development of the competency, organization and accreditation of the Test Laboratory.
(3) The Directorate General of High Technology-Based Flagship Industries conducts coaching on the Low Pressure Regulator industry for LPG Tabung which does not meet the provisions of SNI Regulator Low Pressure for LPG Steel Tabung It is mandatory based on periodic surveillance as referred to in verse (2) the letter a number 1.
Section 5
Head of the Policy Review Board, Climate and Mutu Industries conducting the monitoring and evaluation of the implementation of the provisions as referred to in Article 2, Section 3 and Section 4 as well as evaluation of the performance of the LSPro and the Laboratory of Testing designated as referred to in Article 1.
Section 6
(1) The trial of the Test Breach of the provisions as referred to in Article 3 and/or Section 4 of the paragraph (2) of the letter b, revoked the appointment of its pronunciation.
(2) The LSPro breaches the provisions as referred to in Article 4 of the paragraph (2) of the letter a, revoked his appointment.
(3) The judgment of truth over the breach of the provisions as referred to in paragraph (1) and paragraph (2) is conducted in the assessment meeting of the Institution of Conformity of the Agreement.
Section 7
At the time the Minister ' s Ordinance was promulbed, the Regulation Minister of Industry Number 86/M-IND/PER/8/2012 on the Appointment Of the Assessment Agency in order to Treatment and Supervision of the Indonesian National Standards (SNI) Pressure Regulator Low For LPG Steel Tubes Are Mandatory, revoked and declared not applicable.
Section 8
The Regulation of the Minister comes into effect on the date of the promulctest.
For each person to know it, order the invitation of the Order of the Minister with its placement in the News of the Republic of Indonesia.
Specified in Jakarta
on July 12, 2013
THE MINISTRY OF INDUSTRY
REPUBLIC OF INDONESIA,
MOHAMAD S. HIDAYAT
It is promulred in Jakarta
on 19 August 2013
MINISTER OF LAW AND HUMAN RIGHTS
REPUBLIC OF INDONESIA,
AMIR SYAMSUDIN
Attachment:
bn1032-2013
reditation Committee;
8. Decree of the President of the Republic of Indonesia No. 84 /P of the Year 2009 on the Establishment of the United Indonesian Cabinet II Period 2009-2014 as amended by the Decree of the President of the Republic of Indonesia Number 60 /P of the Year 2013;
9. Regulation Minister Perindustrian Number 86/M-IND/PER/9/2009 about the Indonesian National Standard of Industrial Fields;
Ten. The Regulation of the Ministry of Industry Number 105/M-IND/PER/10/2010 on the Organization and the Working Governance of the Ministry of Industry;
11. Regulation of the Minister of Industry Number 15/M-IND/PER/3/2013 on the Treatment of Indonesian National Standards (SNI) Against Low-pressure Regulator For LPG Steel Tubes To Be Mandatory At Low Pressure Regulators For LPG Tubes;
DECIDED:
establish: INDUSTRY MINISTER REGULATIONS ON APPOINTMENT OF ASSESSMENT AGENCY SUITABILITY IN ORDER OF THE IMPLEMENTATION AND SUPERVISION OF INDONESIAN NATIONAL STANDARDS (SNI) LOW PRESSURE REGULATOR FOR LPG STEEL TUBES TO BE MANDATORY ON LOW PRESSURE REGULATOR FOR LPG TUBES.
Article 1
Pointing:
a. Unaccredited Product Certification Institute (LSPro) as set forth in the letter A Annex Regulation of this Minister to implement the SNI Certification of the Low Pressure Regulator for the LPG Steel Tabung on the Low Pressure Regulator for Tabung LPG; and
b. Unaccredited Test Laboratory as set forth in the letter B Attachment of the Regulation of this Minister to implement the Low Pressure Regulator testing for LPG Steel Tabung on Low Pressure Regulator for LPG Tabung.
Article 2
(1) The LSPro or Test Laboratory as referred to in Article 1 of the letter a or letter b, each must process accreditation to the National Accreditation Committee at least 6 (six) months since promulbed of the Regulation of this Minister and report on the development of the accreditation process in intent to the Head of the Policy Review Board, Climate and Industrial Mutu Industry Ministry.
(2) The LSPro or Test Laboratory as referred to in paragraph (1) must meet the requirements as an LSPro or Test Laboratory that is accredited by the National Accreditation Committee (KAN) for the scope of the Pressure Regulator It is low for LPG LPG SNI 7369:2012 in no later than two years since the Minister's Ordinance was promulred.
(3) If in time as referred to in paragraph (2) the LSPro or the Testation Laboratory is not yet accredited, its appointment is declared over.
Article 3
(1) The Test Laboratory as referred to in Article 1 of the letter b is required to test the entire LSPro request as specified in Section 1 of the letter a and/or technical instance with the same treatment of the LSPro And a technical delivery.
(2) The testing obligation as referred to in paragraph (1) applies to testing for:
a. Issuer of SPPT-SNI Pressure Regulator Low Pressure for LPG Steel Savings on Low Pressure Regulator for LPG Tabung; and/or
B. Supervision of the implementation of the SNI implementation of the Low Pressure Regulator for the LPG Steel Tabung is mandatory at Low Pressure Regulator for LPG Tabung.
Section 4
(1) LSPro and Test Lab as referred to in Section 1 must report the results of the certification performance and te
