Ordinance Amending The Ordinance On Metrological Control Of Meters Used To Measure The Consumption Of Hot And Cold Water

Original Language Title: Bekendtgørelse om ændring af bekendtgørelse om måleteknisk kontrol med målere, der anvendes til måling af forbrug af varmt og koldt vand

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$20 per month, or Get a Day Pass for only USD$4.99.
Ordinance amending the Ordinance on metrological control of meters used to measure the consumption of hot and cold water (Amendment of the rules for type approval and verification, etc.)
section 1 of the Decree No. 1034 of 17. October 2006 on metrological control of meters used to measure the consumption of hot and cold water, as amended by Decree No. 813 of 28. July 2008, shall be amended as follows: 1. The introductory part shall be replaced by the following: ' under section 15 (1) and section 22, paragraph 4, of law No. 602 by 24. June 2005 for business promotion, as amended by Act No. 364 of 13. May 2009, be determined in accordance with the authorization given: «2. § 8 (1), is repealed.


Paragraph 2 becomes paragraph 1.

3. Article 18 shall be replaced by the following: ' article 18. Type approval of measuring devices, see. section 1, paragraph 6, nr. 3, applied with and granted by the Danish safety technology authority. The application shall include evidence that the instrument complies with the statutory requirements in the form of a type test report and draft a type-examination certificate from a laboratory, which is accredited by the Danish accreditation and Metrology Fund (DANAK) or an equivalent accreditation body that is a signatory to the EA ´ s multilateral mutual recognition agreement.
(2). If there are no laboratories with the necessary accreditation to the tests required for a given instrument, approves Security Agency other appropriate laboratories. '
4. section 19, paragraph 1, is replaced by the following: ' the initial verification of measuring devices, which are type-approved before the 30. October 2006 in accordance with the rules in force before 30 June. October 2006, and which has an ever-applicable type approval regulation. section 1, paragraph 4, and of measuring equipment, type-approved in accordance with section 1, paragraph 6, nr. 3, performed by laboratories specially empowered for that purpose by the Danish safety technology authority in the light of the fact that they have the requisite accreditation from the Danish accreditation and Metrology Fund (DANAK) or from a similar accreditation body that is a signatory to the EA ´ s multilateral mutual recognition agreement. '
5. Article 20, paragraph 1, is replaced by the following: ' Reverifikation carried out by laboratories specially empowered for that purpose by the Danish safety technology authority in the light of the fact that they have the requisite accreditation from the Danish accreditation and Metrology Fund (DANAK) or from a similar accreditation body that is a signatory to the EA ´ s multilateral mutual recognition agreement. '
6. In article 23, paragraph 1, the words ' and the Danish accreditation and Metrology Fund '.
7. Chapter 11 is repealed.
8. section 26 (1), is repealed.


Paragraph 2 becomes paragraph 1.

section 2 of the notice shall enter into force on the 1. April 2010.

The Danish safety technology authority, the 30. March 2010 Carsten Sørig/Mathilde Lau Horsman

Related Laws