21/2017 Sb.
DECREE
of 23 December 2003. January 2017
on nuclear safety of nuclear installations
State Office for nuclear safety, establishes, pursuant to section 236 of the Act No.
263/2016 Coll., the Atomic Act, to implement section 24 para. 7, § 25 para. 2
(a). a) to (c)), § 44 para. 4 (b). (c)), § 49 para. 2, § 50 para. 4, § 51
paragraph. 6 (a). a) and b), § 52 para. 2, § 53 para. 2 and § 54 para. 4 (b).
a), c) and (d)):
§ 1
The subject of the edit
This Decree incorporates the relevant provisions of Euratom ^ 1) and establishes
and) reporting deadlines for operational events Office
(b) the information used by the running circuit) feedback
(c) the investigation procedure operational events),
d) criteria for inclusion in the category of operational events,
e) requests for content limits and conditions,
(f) the enumeration values and facts) important in terms of nuclear
the safety of nuclear installations,
g) range, method and time tracking, measurement, assessment, validation and
recording the facts and important in terms of nuclear
the safety of a nuclear installation and retention of information about them,
h) range, the method and time limits for the transmission of information about the inputs and
the facts relevant for the nuclear safety of nuclear
Office equipment,
I) enumeration of other changes in the use of nuclear energy,
j) range and method of documenting other changes in the use of nuclear
energy and their notification of the Office,
to the implementation of process-driven) practices of aging,
l) program requirements controlled aging
m) the rules for the prevention of fission chain reaction and release into the
environment in the handling of nuclear materials and radioactive waste management
and the way the documentation of this manipulation,
n) way of implementing an inactive nuclear device evaluation
about how to perform the first physical) launching of a nuclear installation with
nuclear reactor
p) range and method of documenting the facts pursuant to § 51 para. 1 (b).
(b)) points 1 to 3 of the Atomic Act,
q) way of performing the first nuclear power facility
with a nuclear reactor,
r) range and method of documenting the facts pursuant to § 52 para. 1 (b).
a) and b) and (c). c) points 1 to 3 of the Atomic Act,
with the assurance of nuclear safety rules) during commissioning
a nuclear installation without a nuclear reactor,
t) range and method of documenting the readiness checks of nuclear
device to begin active testing
the rules for continuous provisioning), validating, and documenting
the ability of a stable and safe operation of nuclear facilities,
the deadlines for the submission of the dossier) to the re-introduction of nuclear
the reactor in a critical condition after an exchange of nuclear fuel to the Office and
the requirements on the content,
w) way to accomplish a long-term shutdown of a nuclear reactor in the event of
the research of the nuclear facilities and
x) the procedures for the introduction of processes and activities according to § 49 paragraph 1. 1 (b). u)
the Atomic Act and their documentation and ongoing updates.
§ 2
The concepts of
For the purposes of this Ordinance, means the
and the requirement stipulated limit condition) limits, terms and conditions, the
the performance is a prerequisite for ensuring nuclear safety,
(b)) by pumping limits and conditions the status of non-compliance with the limit conditions, in which the
corrective action is performed within the limits and conditions laid down,
After the period laid down the limits and conditions,
(c) root cause the cause of specific) operational events, that is
a prerequisite for the emergence of this operational events,
(d) a violation of the limits and conditions) the status of the non-compliance with the requirement laid down in the
limits and conditions, including the status of non-compliance with the limit conditions, when
where corrective action is not performed within the limits laid down and
conditions or is exceeded that laid down for its implementation limits
and conditions, and
e) a direct cause of the fact, that immediately raised the operating
event or to her immediately.
§ 3
Time limits for notifying the operational events
[To section 49, paragraph 2 (a)) of the Atomic Act]
Operational event must be notified to the Authority
and, without delay) If on radiation accident,
(b)) to 4 hours, in the case of radiation accident
(c)) for 8 hours, in the case of
1. infringement of the limits and conditions,
2. an unplanned shutdown of a nuclear reactor, fast
3. an activation of security systems
4. the event tentatively evaluated at least level 2 on the international
severity rating scale of nuclear events
5. loss of heat removal from the active zone of a nuclear reactor (hereinafter referred to as
"active zone") when the shutdown nuclear reactor and its non-renewal to the
30 minutes,
6. unplanned emergency levels exceeded quantities laid down in the
program monitoring of releases,
7. the uncontrolled occurrence of radioactive substances, with the exception of natural
radionuclides, outside the controlled area to an extent causing power requirement
dose equivalent greater than 0.25 µSv/h at a distance of 0.1 m from
the surface of things,
8. fire in the premises of a nuclear installation under the legislation
the rules governing the fire prevention,
9. the fatal injury of a natural person,
10. violation of terms and conditions to ensure the function of the equipment installed on the
nuclear facilities to the International Atomic Energy Agency,
11. the event of decreasing efficiency of the system of physical protection of nuclear
the device,
12. exceeding 20 mSv of effective dose due to an unplanned
a one-time external radiation,
13. exceeding the committed effective dose 6 mSv due to internal
contamination, or
14. the uncontrolled leakage of refrigerant from the primary circuit of a nuclear reactor
or other technological media contaminated with radionuclides outside
controlled zone with a capacity greater than 1 m3
d) within 24 hours of creation, in the case of
1. radiation incident in the first degree,
2. provisionally rated grade 1 event on the international scale
severity ratings of nuclear events
3. loss or theft of the source,
4. the uncontrolled leakage of refrigerant from the primary circuit of a nuclear reactor
or other technological media contaminated with radionuclides inside
controlled area with a capacity greater than 1 m3
5. an unplanned decrease in performance of nuclear installations by more than 50%
the nominal power of a nuclear reactor, with an expected duration of more than
72 hours, or
6. loss of the ability to control the source of ionizing radiation, and
(e)) the next business day, if the
1. Drawing limits and conditions,
2. the action of the system performance of a nuclear reactor,
3. the fall of foreign objects into the primary circuit of a nuclear reactor, or
4. an unplanned downtime of the batch input monitor teledozimetrického
the system.
§ 4
Heading information used by the feedback system
[To section 49, paragraph 2 (b), (c)) of the Atomic Act]
Feedback system must use information about
and operational events,)
(b)) the experience of other nuclear facilities, including foreign ones, and
(c)) the experience of other technical and technological fields.
§ 5
The procedure for investigation of operational events
[To section 49, paragraph 2 (b)) of the Atomic Act]
(1) in the investigation of operational events must be followed so that the
revealed
and causes and circumstances) operational events,
(b) deterioration of nuclear security) developments in the operation of nuclear facilities
and
(c) reduction of the rate of the security provisions) and affecting the level of protection to the
depth.
(2) the holder of the authorization must, in the framework of the investigation of operational events
and the importance of operational events) in terms of nuclear safety,
radiation protection, technical safety, monitoring of radiological situation
management of radiation incidents and security of nuclear installations and
the consequences,
(b)) to determine the progress of the event, including the establishment of operation resulting from the derogations
or fail,
(c)) to assess the activities of the workers, and that the methods for the evaluation of the impact of
human and organisational factors
d) assess the impact of safety culture at the opening event,
(e)) to analyse direct causes and root causes of operational events,
f) reveal any significant negative trend in terms of nuclear
safety, radiation protection, technical safety, monitoring
the radiation situation, the management of radiation incidents and security and
g) identify potential demotion of safety provisions and increase
the risk of related operational events.
(3) the investigation of operational events should be carried out without delay. Preferably
must be investigated important operational event.
§ 6
The criteria for inclusion in the category of operational events
[To section 44 para. 4 (b) (c)) of the Atomic Act]
(1) an important operational event is an event that
and) leads to activation or failure
1. the safety system,
2. the system secured power supply,
3. the system of restrictions on the exercise of a nuclear reactor, or
4. pressure relief system, which is the selected device,
(b)) leads to the infringement of the limits and conditions,
(c)) leads to an unplanned change in the performance of nuclear reactor by more than 10%,
d) lies in the failure on the selected device
1. the head of the pumping limits and conditions, or
2. related to ensuring the fulfilment of the safety functions,
e) includes the failed tests or checks selected
the device according to the limits and conditions,
f) includes defect equipment necessary for the safe implementation of the exchange of
nuclear fuel at the time of the exchange of nuclear fuel,
g) leads to an unplanned loss or disturbance of the residual heat removal from the
Active zone
h) leads to a malfunction of the system intended for the storage of irradiated nuclear
fuel,
and control reactivity) affects active zone
j) lies in the violation of physical barrier against leakage of fissile
products or radioactive substances,
to) includes the fall of the regulatory authority or of his unplanned decrease of more
than 50 cm,
l) includes a forced interrupt execute physical tests or
nuclear power equipment, or
m) is caused by deficiencies in the safety evaluation or documentation
management system and leads to cross an important parameter in terms of
nuclear safety.
(2) a significant operational events is also operating an event that
and) is caused by worker error that leads to non-compliance with the design
documentation, or to cross an important parameter in terms of nuclear
safety for the selected device,
(b)) leads to unplanned operational service levels exceeded quantities laid down in the
the monitoring programme,
c) causes an unplanned failure teledozimetrického
the system,
(d)) results in an error when handling
1. irradiated nuclear fuel, fresh nuclear fuel or nuclear
the material, or
2. a container with fresh nuclear fuel or irradiated nuclear
fuel,
e) includes loss, theft or unauthorized relocation of the
resources, nuclear material or radioactive waste,
f) involves damage to the nuclear material or packaging the file with
nuclear material,
g) violates the terms of ensuring function of the equipment of the International Agency for
Atomic Energy installed on the nuclear installation,
h) reduces the effectiveness of the system of physical protection of nuclear facilities,
I) includes unauthorized crossing barrier system of physical protection or
attempt to interfere with,
j) include the announcement of a radiological emergency events and the convening of the emergency
staff,
includes multiple failures to) the human factor,
l) includes knowingly misrepresenting the documentation,
m) includes the presence of foreign objects in the primary circuit
a nuclear reactor, or
n) satisfies the condition referred to in paragraph 1 or to the letter a)), was founded on
another nuclear device, and the feedback system is classified as a
applicable to a nuclear device.
(3) a minor operating event is an event that is not operating
significant operational events.
§ 7
Limits and conditions
(Section 24 para. 7 of the Atomic Act)
(1) the limits and conditions must include the
a) safety limits,
(b) protective systems, settings)
(c) limit the conditions)
(d)) the inspection requirements,
e) organisational measures and
(f)) justification the limits and conditions.
(2) safety limits shall lay down the limit values for the physical and
technological parameters directly affecting the physical state
safety barriers, which must not be exceeded. Safety limits
must be set for the conservative approach.
(3) the setting up of protective systems must provide values for physical and
technological parameters important in terms of nuclear safety and
radiation protection, which shall automatically
protection and safety systems. These values must be laid down,
to the physical and technological parameters for the following transition
the process does not exceed safety limits.
(4) the limit conditions must provide
and maintaining safety) requirements for significant physical and
technological parameters in accordance with the project of a nuclear device, and
b) functional requirements for operability of safety systems.
(5) the audit requirements must be determined
and the periodic inspection range setting) and compliance with the parameters and
terms of serviceability of the systems, structures and components and
(b) carry out checks according) the frequency of (a)), taking into account
1. the reliability of the systems, structures and components,
2. the requirements of legal regulations and technical standards and
3. operating experience.
(6) the organisational arrangements must provide for
a) measures for cases where
1. experiencing pumping limits and conditions or infringements and the conditions
2. uptime requirements are not met, structures and systems
components,
3. one of the conditions is not met, the settings of the systems, structures and
components, or
4. the condition is not met, the activation of protective systems
(b) time limits for the implementation of the measures) under (a)),
(c) the duties of the managerial staff,)
d) requirements for specific professional competence of selected workers,
(e) minimum manning requirements) innings,
(f)) the requirements for undertaking internal and external control of compliance with the limits and
the conditions and
g) range and method of conveying information to the Office.
(7) the content of the limits and the conditions shall be in accordance with the results of the
security analysis.
§ 8
Quantities and really important in terms of nuclear safety
nuclear device
[To section 25 para. 2 (b) and (c))) up to the Atomic Act]
(1) the Quantities and factors important in terms of nuclear safety
in the case of nuclear installations with nuclear reactor
and physical quantities and values) parameters that serves a comprehensive
information about the status of the active zones and other related systems,
structures and components important in terms of nuclear safety or
nuclear material or radioactive waste in
nuclear installation,
(b)) resulting from non-compliance with nuclear safety, technical
safety, radiation protection, radiation situation monitoring, management
radiation emergencies and security and its effect analysis of this
disagreements and action taken following this non-conformity,
c) systems, structures and operability of the components of a
in terms of nuclear safety and handling and work orders,
concerning them,
d) information on the pumping limits and conditions and infringements and the conditions
e) test results, inspection, maintenance and repair of selected devices and
systems, structures and components with an impact on nuclear safety, which
are the selected device, and records about them,
(f)) the data relevant for the monitoring and evaluation of aging systems,
structures and components important in terms of nuclear safety,
g) parameters of the systems, structures and components with the influence of the nuclear
safety, not the selected device, and select equipment,
that provide an overview of the status of the nuclear facilities, information about their
development and a record of them,
h) values of surface contamination of systems, structures and components,
I) notification of operational events, description and other documents, which is
concern,
j) the result of verification of nuclear worker health
the device,
the result of the verification of the eligibility of personality) selected worker,
l) information contained in a record on the implementation of the qualification requirements
established for the worker's nuclear device,
m) an indication of the form and the amount of radioactive effluents
n) indication of batch input in the monitored area of the nuclear device,
about) an indication of the changing of the selected devices and systems,
structures and components with an impact on nuclear safety, which
are not selected device,
p) an indication of the quantity of nuclear material and the selected item and manipulate
them,
q) an indication of the emergence of the radioactive waste and waste it,
r) indication of the inspection carried out in accordance with the limits and conditions and program
operational controls,
with) an indication of a change in the area of provision of physical protection, which is not different
change in the use of nuclear energy,
t) Protocol test systems, structures and components during the construction,
physical energy starting and starting a nuclear device,
u) information contained in voice record phone call from
the workplace, where the business is carried on particularly important in terms of
nuclear safety, and workplace of technical support service and
emergency control centre,
in) voice communications information from the system installed on the nuclear
the device,
w) information contained in the internal rules and
x) information contained in a production journal.
(2) the Quantities and factors important in terms of nuclear safety
in the case of a nuclear installation without a nuclear reactor
and information contained in) internal rules,
(b) the information contained in the operational) schema
(c) information contained in) handling the card,
(d) the information contained in the operational) program,
e) information contained in emergency prescription
(f) the result of the evaluation)
1. the inspections and tests in accordance with etapového quality assurance programme
2. quality requirements for nuclear facilities and
3. quality requirements, including information of the selected device in the list of defects
and arrears,
g) an indication of the technical amendment to the selected devices and systems, structures and
components with an impact on nuclear safety that are not selected
a device that is not another change in the use of nuclear energy,
h) indication of the change in the area of provision of physical protection, which is not different
change in the use of nuclear energy,
(I) the information contained in the record) of the vocational training of workers of nuclear
the device,
j) information contained in the record of the voice phone call
the workplace, where the business is carried on is relevant for nuclear
the safety and activity of particular importance in terms of nuclear safety,
and
k) information from the system voice installed on the nuclear
device.
(3) the quantities and really important in terms of nuclear safety
nuclear device must be recorded by the all the
life cycle of a nuclear device, and information about them must be
retained for 10 years after the closure of the nuclear device.
Voice record must be kept for a period by 12 months
After its acquisition.
(4) the quantities and really important in terms of nuclear safety
nuclear equipment referred to in paragraph 1. about), and s) and paragraph 2. (g))
and (h)) must be notified to the authority in the previous calendar year to 31. January
the following calendar year in the summary report. The summary report must
contain
and the name changes)
(b) the changes and)
(c) a description of the change).
Other changes in the use of nuclear energy
§ 9
[To section 49, paragraph 2 (b), (d)), and (e)) of the Atomic Act]
(1) any other change in the use of nuclear energy, which is changing the
the selected device do not affect nuclear safety, technical
the safety and physical protection of nuclear facilities, is
and technical change for the selected device) listed in security class
1 or 2, that is an Exchange, or change the type of the selected device
or parts of it, which its design function, configuration, or
the result of the safety analysis,
(b)) change that leads to the removal of the identified mismatches on the selected
the equipment to ensure compliance with the design features of this device,
(c) the manufacturer or type) change to the selected device,
(d) a change in the algorithm, and setting) protective system that changes the
a safety feature so that it works in accordance with the original project
functions,
e) parameter of the selected device, in which the original
design feature and does not change the configuration of this device,
f) change the settings of the protective system, in which remain valid
safety analysis and there is no change of limits and conditions,
g) intervention in the parts of the selected device, which is the carrier safety
the functionality that this safety function does not change, or
h) change the documentation for the povolovanou activity that is not approved
By the authority.
(2) any other change in the use of nuclear energy, which is the organizational
by changing the holder of the authorisation for activities related to the use of nuclear
energy is changing the nature of the Organization to improve
the functionality of the control.
(3) any other change in the use of nuclear energy, which is changing the
the holder of the authorisation for activities related to the use of nuclear energy
in the area of provision of physical protection, is
and replacement of system components) detection, access control and industrial
the television component of working with the same physical principle, if
the new component is placed in the same position, the installation does not
the change in the supply of technical system of physical protection or in its
communication protocol and its deployment does not lead to a reduction in the effectiveness of the
ensure physical protection,
(b)) or the improvement of minor updates to the computer or software
equipment of technical system of physical protection, in which there is no
change the functional properties of the control system and process evaluation
activity detection system, access control and CCTV,
(c) the replacement of the power Distributor) technical system of physical protection of
because of its excessive wear or fault prevention
in the context of State carried out regular maintenance,
(d)) the configuration change or cast components, subsystems, detection
access control and CCTV, if there is no reduction in the
hedge effectiveness of physical protection,
e) temporary change in configuration or cast components detection system,
access control and CCTV carried out in the wake of the failure
physical protection devices or operating failure of nuclear technology
device, or
(f)) other technical change system of physical protection, which does not have a substantial
effect on its existing functionality.
§ 10
[To section 49, paragraph 2 (b), (d)), and (e)) of the Atomic Act]
(1) any other change in the use of nuclear energy must be notified to the Authority
in writing
and) at least 30 days before the start of the implementation of the changes,
(b)) in the case changes according to § 9 para. 1 (b). (b)), if there is or there is a
breach of the limits and the conditions or non-compliance is identified during the planned
maintenance before starting the implementation of the changes and
(c)) then after the change to 31. January of the following calendar
of the year.
(2) the notification of other changes in the use of nuclear energy in accordance with paragraph 1
(a). a) and b) must contain
a) description and justification of the changes
(b) assessment of the impact of changes on) nuclear safety, radiation protection,
technical safety, monitoring of the radiation situation, the management of radiation
emergency and security, including the rationale for the assessment of the
the impact of,
(c) information about the update-related) documentation
(d)) the expected time timetable for implementation of the changes and
e) assess the impact of changes on the human factor.
(3) the notification of other changes in the use of nuclear energy in accordance with paragraph 1
(a). (c)) must contain
and the name changes)
(b) the actual term the change) and
(c)) the actual extent of the changes.
§ 11
The procedures for implementing the process of controlled aging
[To section 49, paragraph 2 (b), (f)) of the Atomic Act]
In the process of aging must be driven
and to lay down rules and criteria) for the selection of the systems, structures and
components subject to a controlled process of aging,
(b)) in the selection of the systems, structures and components referred to in subparagraph (a)) included
1. the selected device and
2. the systems, structures and components with an impact on nuclear safety,
that is not the selected device,
c) identified degradation mechanisms of systems, structures and components according to
(a) the effects of aging),
d) introduced measures to monitor and minimize degradation
mechanisms and effects of aging according to subparagraph (c)),
e) ensured early detection and monitoring of degradation mechanisms and
effects of aging according to subparagraph (c)),
(f)) introduced methods of monitoring and testing to early detection of degradation
mechanisms and effects of aging according to subparagraph (c)),
g) set out the parameters of the systems, structures and components referred to in subparagraph (a))
tracked in the process of controlled Aging (hereinafter referred to as "the monitored parameter"), and
status indicators of the systems, structures and components,
(h)) determined by the criteria of acceptability of monitored parameters,
I) performed monitoring and determining the impact of aging and the development of action
the degradation mechanisms on systems, structures and components according to
(a)) on the basis of monitored parameters, the status of these indicators
systems, structures and components and acceptance criteria monitored
parameters,
j) periodically evaluated the monitored parameters and the current status of systems,
structures and components in accordance with subparagraph (a)),
to measures in) operation and maintenance of the systems, structures and components
According to subparagraph (a)) to reduce or eliminate the impact of aging and exposure to
the degradation mechanisms and
l) introduced corrective measures, if they are not fulfilled the criteria for admissibility
monitored parameters, so as to ensure uptime and
the reliability of systems, structures and components referred to in subparagraph (a)).
§ 12
Program requirements controlled aging
(Section 24 para. 7 of the Atomic Act)
Program controlled aging must be uniquely identified, determine the
input data-driven process of aging, establish rights and obligations
workers performing activities in a controlled process of ageing and
contain
and enumeration systems, structures) and components under section 11 (b). and)
b) enumeration of degradation mechanisms and the effects of aging,
c) enumeration of monitored parameters and indicators of their condition, which are
used for monitoring and determining the development impacts of aging,
(d) the arrangements for monitoring and determining the) development of the impacts of aging,
e) enumeration of monitored parameters, acceptance criteria
f) rules for the evaluation of monitored parameters, reviews the current state of
systems, structures and components according to § 11 (a). and) and determining the prediction
the future status of these systems, structures and components, if the reference
parameter has values of cumulative nature,
g) enumeration of remedial measures in case of non acceptance criteria
monitored parameters,
h) rules monitor the effectiveness of the measures in the operation and maintenance of systems,
structures and components according to § 11 (a). and) to reduce or eliminate
the effects of aging, and exposure to degradation mechanisms on these systems,
construction and components,
I) description to ensure feedback is used to measure the effectiveness of the process
controlled ageing,
j) evaluating the effectiveness of process-driven rules and aging
to document the activities of the rules) within a process of controlled aging.
Handling of nuclear material and radioactive waste and its
documentation
section 13 of the
[To section 49, paragraph 2 (b), (g)) of the Atomic Act]
(1) during the storage of fresh or irradiated nuclear fuel
nuclear fuel and handling must be ensured by compliance with the requirements
to maintain the podkritičnosti laid down by Decree of the requirements on
the project of a nuclear device. This preservation shall be podkritičnosti
controlled. Keep podkritičnosti and its control must be
documented.
(2) the exchange of nuclear fuel in a nuclear reactor must have
the concentration of soluble absorbátoru neutrons in a refrigerant
the value of the order, taking into account possible errors have been continuously secured
podkritičnost nuclear fuel not less than 0.02.
(3) when handling
and) with nuclear material must be excluded the possibility of
1. development of fission and
2. nuclear material leaks into the environment, and
(b)) radioactive waste must be excluded the possibility of it leak into
of the environment.
§ 14
[To section 49, paragraph 2 (b), (g)) of the Atomic Act]
(1) when handling spent nuclear fuel must be substantially
excluded
and hermetičnosti fuel element) violation of and
(b) damage due to this fuel) residual heat.
(2) nuclear safety and radiation protection in the handling of nuclear
material or radioactive waste must be ensured
and use of the equipment provided for the project) the nuclear device that
It was successfully tested,
(b)) the implementation of handling in accordance with internal regulations,
(c) continuous supervision over the handling) and the status of the nuclear facilities and
d) in the case of handling of nuclear fuel in a nuclear reactor
continuous control
1. active zone
2. the density of heat flow of neutrons,
3. the level and temperature of the refrigerant and
4. the concentration of boric acid at a frequency to ensure the preservation of
podkritičnosti.
(3) handling of nuclear material or radioactive waste in a
nuclear facilities, including related activities, must be carried out
According to the documentation, which must contain the
and a description of the procedure of individual operations),
(b) the readiness of systems) requirements, structures and components on the
handling,
(c)) the State information storage of nuclear material or radioactive
waste,
d) in the case of nuclear material, its identification and kartogramy
save it,
e) in the case of handling of nuclear fuel in a nuclear reactor or
pool storage of irradiated nuclear fuel data on the concentration of
boric acid in the coolant of the primary circuit of a nuclear reactor and
pool storage of irradiated nuclear fuel,
f) data on organizational measures to ensure nuclear safety and
radiation protection and
g) information about the necessary complementary measures, which are not included in the
the internal rules.
(4) Technological operations related to movement of nuclear material
must be recorded in a document with a statement of its default and
the final places and taken measures to ensure nuclear safety,
radiation protection, technical safety, monitoring of radiological situation
management of radiation incidents and security that are not
listed in the operations documentation.
General conditions of the commissioning of a nuclear installation and operation
nuclear device
§ 15
[To section 50, paragraph 4, § 51 para. 6 (a)), and (b)), § 52 para. 2, § 53 para. 2
and § 54 para. 4 (b). the Atomic Act)]
(1) a nuclear device must be put into service and operated only in the
modes set by the project of a nuclear device.
(2) the emergence of deviations from the prescribed course, with a negative impact on the
nuclear safety or events with negative effects on the nuclear
safety during testing during commissioning
a nuclear installation, or during the operation of nuclear facilities must be
immediately put into a safe, steady and controlled
State.
(3) in the case of a State referred to in paragraph 2 can continue putting into
operation of a nuclear facility or nuclear device after operation
and analysis of the causes of this) the implementation of a State
(b) clarify and eliminate the causes) of this condition,
c) verifying compliance with the safety features and functional integrity of all
systems, structures and components that may be affected, and
(d)) implementation of corrective measures to prevent the recurrence of this condition.
(4) the part of the nuclear device that is placed in service or
operated, it must be from the parts, for which construction or
inactive tests separated so that installation work or malfunctions and
the crash did not affect nuclear safety section to be constructed under the reported
into service or parts already operated. This condition must be met
also, if it is a separate nuclear facilities.
(5) for the entire period of the commissioning of a nuclear installation and
the permit holder must be knowledgeable of the current state of nuclear
device.
(6) the processes and activities related to the putting into operation of nuclear
equipment or its operation must be carried out by the work
statements, internal regulations and programs, placing the nuclear device to
operation.
(7) prior to the activity of importance for nuclear safety
or activities of particular importance in terms of nuclear safety must be
examined and supported by the Office, that these activities will not jeopardize the nuclear
safety.
section 16 of the
[To section 50, paragraph 4, § 51 para. 6 (a)), and (b)), § 52 para. 2, § 53 para. 2
and § 54 para. 4 (b). the Atomic Act)]
(1) before making changes that affect nuclear safety or radiation
protection must be
and) shown that does not reduce the level of nuclear safety and radiation
protection, and
(b) the degree of compliance with the evaluated) passes the security provided in the framework of the
1. the input of the safety report,
2. preliminary safety report;
3. operating the safety report for the first launch of nuclear physics
device with a nuclear reactor, in the case of nuclear installations with nuclear
reactor, and
4. operating the safety report.
(2) after you make changes that affect nuclear safety or radiation
protection must be at the time of entry into service of the change of
nuclear device
and the internal rules) into line with the actual status of the nuclear
equipment and
(b)) with this change familiar people, the activities of this change
touches.
(3) after the operational events, which could be negatively affected by
safety features or functional integrity of the systems, structures and
the components must be
and determined whether it is) potentially affected by the safety function of the system,
structures and components, and
b) validated the functionality of other systems, structures and components
to ensure the fulfillment of the same security features.
(4) in the case of a nuclear installation with a nuclear reactor must be
exceeded the safety limit of nuclear reactor shut down immediately.
(5) the introduction of a nuclear reactor into a critical state after the weaning according to
paragraph 4, it is possible to
and the detection and removal of causes), that led to the crossing
the safety limit,
(b) to eliminate the consequences of breaching a safety), and
c) analyses to detect the status of the nuclear facilities after crossing
the safety limit.
§ 17
[To section 50, paragraph 4, § 51 para. 6 (a)), and (b)), § 52 para. 2, § 53 para. 2
and § 54 para. 4 (b). the Atomic Act)]
(1) a worker who performs activities on nuclear facilities deemed critical to
in terms of nuclear safety or activity, particularly important in terms of
nuclear safety in the operation of a nuclear facility or
must be installed prior to the execution of this activity
and familiar with the content of the documentation), which refers to the executing
activities, and
(b)) have been trained and further training.
(2) in the case of a change affecting nuclear safety or
radiation protection during commissioning of a nuclear installation or when you
its operation must be a worker performing activities related to
This change affected by her before the start of the use of the results of this
changes
and be familiar with it) and with the documentation, which is affected by it, and
(b)) have been trained and further training.
section 18
[To section 50, paragraph 4, § 51 para. 6 (a)), and (b)), § 52 para. 2, § 53 para. 2
and § 54 para. 4 (b). the Atomic Act)]
(1) for the inspection, testing and maintenance of selected devices and systems,
structures and components with an impact on nuclear safety, which are not
the selected device, the commissioning of a nuclear installation or its
traffic shall be in place documented procedures to ensure
their reliability and functionality in accordance with the project of a nuclear
device.
(2) maintenance, tests and checks referred to in paragraph 1 shall be carried out in
time intervals to ensure the damage of selected
equipment and systems, structures and components with the influence of the nuclear
safety, not the selected device, before it can be
their failure.
(3) the information about maintenance, tests and checks referred to in paragraph 1 shall be
recorded, stored and evaluated to obtain information about failures
selected devices and systems, structures and components with an impact on
nuclear safety, not the selected device. If such
failure detected, must be
and corrective maintenance and)
(b) preventive maintenance program) modified so that, in future, was preceded by a
a similar failure.
(4) the extent and frequency of preventive maintenance, tests and checks of the selected
equipment and systems, structures and components with the influence of the nuclear
safety, not the selected device, it must be established on the
the basis of their
and in terms of importance) nuclear safety,
(b) reliability and vendor recommendations) of the systems, structures and
components and
(c) the experience and results of the monitoring) the conditions of operation of these systems,
structures and components.
(5) the scope and frequency of preventive maintenance, tests and checks of the selected
equipment and systems, structures and components with the influence of the nuclear
safety, not the selected device, must ensure that their
reliability and functionality.
(6) after the maintenance, review, or change status must be selected
equipment and systems, structures and components with the influence of the nuclear
safety, not the selected device, before putting back into
operation assessed, documented, and validated the functional test by advance
an established programme.
(7) fix the selected devices and systems, structures and components with the
impact on nuclear safety, which is not the selected device, you must
be carried out so as to be reasonably ensured during repair
achievable level of nuclear safety of a nuclear installation.
§ 19
[To section 50, paragraph 4, § 51 para. 6 (a)), and (b)), § 52 para. 2, § 53 para. 2
and § 54 para. 4 (b). the Atomic Act)]
(1) physical run must be carried out according to the prearranged
a program of physical execution. Nuclear energy startup
the device must be carried out according to the preset program
energy startup.
(2) before starting a physical run must be verified with the match status
nuclear equipment with the requirements of the legislation and the following documents:
and physical boot) program including schedule, and minor programs
the individual tests, including loading,
b) limits and conditions,
(c)) the internal rules governing the physical execution, including regulation for
ensuring nuclear safety and radiation protection in the handling of
nuclear fuel, nuclear material and radioactive waste,
(d) evidence of the fulfillment of the established) qualification of personnel and documents about
the training and credentials of workers to activities relating to the performance of functions,
including an overview of the cast shifts,
e) evidence of testing and readiness of the systems, structures and components
with an impact on nuclear safety, which is not the selected device, and
selected devices that are involved in the execution,
f) proof of compliance with authorisations issued by the authority and the
g) program management system.
(3) before the start of the nuclear power equipment must be
checked the status of a nuclear installation with matching the requirements of legislation
and the following documents:
a) in the case of the first energy nuclear device, launching the program
the first nuclear power facility with a nuclear reactor
and trial operation, including a timetable, and minor programs
power,
b) limits and conditions,
(c)) file necessary for the execution of the internal rules of the energy
launching a nuclear device corresponding to the actual implementation
nuclear installation,
(d) evidence of the fulfillment of the established) qualification of personnel and documents about
the training and credentials of workers to activities relating to the performance of functions,
including an overview of the cast shifts,
e) evidence of testing and readiness of the systems, structures and components
with an impact on nuclear safety, which is not the selected device, and
selected devices, that are involved in energy startup,
f) proof of compliance with authorisations issued by the Office,
g) program management system
(h) to perform a physical) logs run and meet the criteria
the success of the program, the physical boot of a nuclear installation and
(I) a summary of the results of the document) the readiness checks of nuclear
the plant and its workers to the energy of the nuclear startup
device.
Requirements for the commissioning of a nuclear installation without nuclear
the reactor and the inactive, the first physical trial run and the first
the energy of the nuclear installation run with nuclear reactor
section 20
[To section 50, paragraph 4, § 51 para. 6 (a)), and (b)), § 52 para. 2 and § 53 para.
2 the Atomic law]
(1) the commissioning of a nuclear installation without a nuclear reactor and
inactive, the first trial run and the first physics energy
launching a nuclear installation with a nuclear reactor (hereinafter referred to as "marketing
the nuclear device into service ") must be carried out so that the
and marketing programme) is a nuclear device into operation and marketing
the nuclear device into operation is carried out in accordance with it,
(b)) each stage consists of a comprehensive set of tests,
(c)) tests demonstrate the fulfilment of the safety criteria by program
placing a nuclear device into operation,
d) test results are documented and
(e)) the following stage is initiated after a successful performance of tests
the previous stage.
(2) move to the next stage of putting into operation of a nuclear installation is
possible after
and any work and) completion of previous tests,
(b)) meet all criteria for success of the previous stages in accordance with the
documentation for povolovanou activity
(c) ensuring the readiness of the selected devices) to begin a phase,
(d) the readiness of workers to) ensure the initiation stage,
(e) the existence and correctness) ensure documentation for povolovanou
activity,
(f) comprehensive functional verification successfully) nuclear devices and
g) verification of compliance with the requirements under subparagraphs) to (e)) and its
documenting.
(3) in the course of the tests when placing the nuclear device into operation is
prohibited from disconnecting elements of the protective system of a nuclear reactor, if
the remaining part of the elements of this system does not provide reliable performance
the requirements of the law and the limits and conditions.
(4) the results of the readiness checks of nuclear facilities to individual
stages of placing a nuclear device into operation and the operation must be
summarized in the summary document of verification.
section 21
[To section 50, paragraph 4, § 51 para. 6 (a)), and (b)), § 52 para. 2 and § 53 para.
2 the Atomic law]
(1) the stage of placing a nuclear device into operation must be carried out
According to previously drawn up by the etapového program.
(2) in the context of the stage of placing a nuclear device into operation must be
and gradually the tests validated)
1. conformity of the systems, structures and components with the requirements of the legislation
and the project of a nuclear device, and
2. project of the nuclear device set modes and characteristics
nuclear facilities and
(b) the tests referred to in point (a))) are carried out so that the conditions have been created
for the testing of other units and a successful complex functional verification of nuclear
devices before you start the trial run.
(3) the Stage program must include
and target, and description) a methodology for carrying out the work stages,
(b)) the mutual time and logical links between the activities of the stage,
(c) technology readiness requirements) and resources on the activities of the stage,
(d) the criteria and methodology) safety evaluation of their performance,
e) description of the start and final status stage,
(f) a description of the organizational and personnel) to ensure phase,
g) a description of how the transition to the next phase and
h) list of programs for individual activities.
(4) for each sub-programme activities must contain the
and target, and description) methodology for the implementation of the activities,
(b) the readiness of technology) requirements and resources to an activity,
(c) the criteria and methodology) safety evaluation of their performance,
d) opening and closing activity status and
(e) a description of the organizational and personnel) to ensure the activities.
The rules for continuous provisioning, authentication and documentation skills
a stable and safe operation of a nuclear installation
section 22
[To section 54, paragraph 4 (a)) of the Atomic Act]
(1) before the start of operation of a nuclear installation shall be verified with the match
the status of the nuclear facilities with the requirements of the legislation and these
documents:
and) limits and conditions,
(b)) the internal rules corresponding to the actual implementation of nuclear
the device,
(c) evidence of the fulfillment of the established) qualification of personnel and documents about
training and examination of the qualifications of workers to set out by the
activities,
d) overview of the cast shifts,
e) evidence of testing and readiness for operation of the selected device
f) proof of compliance with authorisations issued by the Office,
g) program operational controls,
h) program management system
I) overview of the changes of the nuclear facilities, which the nuclear devices different from the
the job status of nuclear devices before the first physical startup
nuclear installation with a nuclear reactor,
(j)) on the implementation of protocols of the nuclear power equipment and
meet the criteria for success of the program of the first power
the nuclear reactor of a nuclear installation and trial operation, including the
schedule,
the control results) evidence of the readiness of the nuclear facility and its
staff for testing operation,
l) the annual timetable for the operation and
m) proof of the results of the readiness checks of nuclear devices and its
staff to operate.
(2) schedule the operation is part of the service and shall establish the
the planned shutdown of a nuclear reactor.
(3) the schedule of service must be updated once every 12 months, and
passed the Office to 31. March. To change the schedule of the Office must be
passed within 10 days after its implementation.
Article 23 of the
[To section 54, paragraph 4 (a)) of the Atomic Act]
(1) the internal regulations shall lay down the procedures for the States of nuclear facilities
so that was in the course of its operation, provided nuclear safety,
radiation protection, technical safety, monitoring of radiological situation
management of radiation incidents, and security.
(2) the internal rules and systems, structures and components shall be
operation of a nuclear installation verified and modified taking into account the
the present level of science and technology and the application of experience from practice, and
the previous operation of a nuclear facility.
(3) If during the operation of nuclear facilities shut down nuclear reactor with
fuel files in the active zone, must be continuously controlled
and including the period of the exchange of fuel assemblies, particularly in terms of
the preservation of podkritičnosti active zone and heat dissipation from the active zone.
(4) the operation of a nuclear facility with a nuclear reactor
and) must be the holder of the authorisation to operate a nuclear installation is aware of the
the effectiveness of the
1. protective system
2. powerful elements of safety systems,
3. compensation elements and
4. absorbátorů Neutron,
(b) effectiveness of the performance elements) have a protective system of a nuclear reactor
with sufficient slack to ensure the shutdown of a nuclear reactor and its
keep in podkritickém condition and compensate for the reactivity of the active zone, and it
After a period of time and to the extent that they are considered in the safety analysis,
(c)) must be the holder of the authorisation to operate a nuclear installation is known
the maximum dose of the active zone and reactivity
(d)) must not be disconnected channels protective system or individual Executive
elements of the protection or security of the system, if the remaining number of
channels of the protective system, or the powerful elements of the protection or
the security system does not ensure nuclear safety.
(5) operation of a nuclear installation shall be
and ensured the continued presence and) the availability of a complete and updated
the file of the internal rules, including limits and conditions on control
workplaces,
(b)) this operation periodically evaluated,
c) analysed arising from operational events and proposed measures to
Prevention of reoccurrence, and
(d) analytical report) handled by arising from operational events and passed
The Office once a month; This report shall include in particular the
1. the draft of the measures to prevent arising from operational events and
2. information on the status of implementation of the measures referred to in point 1.
section 24
Documentation for re-entry into the critical condition of the nuclear reactor
After an exchange of nuclear fuel
[To section 54, paragraph 4 (b), (d)) of the Atomic Act]
(1) documentation for the recovery of the placing of a nuclear reactor to the critical
State after the nuclear fuel Exchange must include in the case of
and neutronově-) information about the physical characteristics of the active zone
nuclear reactor
1. the results of the calculations, the neutronově-physical properties of the active zone
the fuel charge for the following fuel campaign
2. effects and reactivity coefficients,
3. the layout of the performance in an active zone,
4. a description of the changes in reactivity caused by unsteady, poisoning
5. integral and differential effectiveness of regulatory authorities and the effectiveness of
liquid absorbátoru and
6. operating limits of the active zone and fuel assemblies,
(b)) kartogramu garage during
1. Description of the fuel charge and fuel enrichment,
2. information on the type of fuel used and length of stay of each fuel
the files in the active zone, their properties and their number in the
the following fuel campaign
3. deployment of the fuel assemblies in the active zone and
4. the layout of the active zone,
c) documents and protocols on the readiness of device evaluation
in terms of nuclear safety documents and evaluation reports
the readiness of the selected devices and systems, structures and components with the
impact on nuclear safety, which is not the selected device in the
areas
1. traffic management
2. care of the equipment,
3. reactor physics,
4. coordination of the activities,
5. operating modes,
6. nuclear safety,
7. radiation protection
8. the physical protection and
9. technical security
d) documents and protocols of the operational controls information from
1. operating of NDT inspections
2. operating special checks,
3. operational engineering controls,
4. the operational review of the checks
5. checks on operational Diagnostics,
6. the operational controls in the area of compliance with chemical modes of operation
nuclear installation,
7. the operational controls and electrical systems
8. the operational controls management and control systems,
e) evidence of meeting the criteria of acceptability of the information about whether they are
criteria of admissibility regarding the documentation referred to in points
(c)), and (d)),
(f) a summary of the results of the document) the readiness checks of nuclear
the plant and its workers to the next traffic
1. the document of the readiness of the workforce involved and engaged
the management, operation and control of power equipment, including the necessary
maintenance and repair of the device during operation, the next operation,
2. a list of the changes made during the operation, and
downtime of systems, structures, components with the impact to the operating
a safety report from the date of its last update,
3. update the limits and conditions following the changes referred to in point 2,
4. the list of changes made during the last safety messages
fuel cycle
5. Declaration of thresholds and conditions
6. Declaration on the updating of the internal rules and
7. proof of testing and readiness of the selected devices and
g) schedule next operation of a nuclear facility, including the
placing a nuclear device into a renewed operation and programs of physical
and nuclear power device
1. the programmes for the physical execution of a nuclear reactor,
2. the power of a nuclear reactor programs,
3. the timetable for the continued operation of a nuclear installation with a layout
and type of traffic in a given time period, and
4. the term of placing nuclear reactor in a critical condition after replacing the
nuclear fuel.
(2) documentation of the re-entry into the critical nuclear reactor
State after the exchange of nuclear fuel referred to in paragraph 1 (b). (f)) must be
Submitted to the authority at least 48 hours before the start of renewal
a nuclear reactor in a critical state.
(3) documentation for the recovery of the placing of a nuclear reactor to the critical
State after the exchange of nuclear fuel referred to in paragraph 1 (b). a) and b) must
be submitted to the authority at least 7 days prior to the renewal
a nuclear reactor in a critical state.
§ 25
Long-term shutdown of a nuclear reactor in the event of nuclear research
device
[To section 54, paragraph 4 (b), (c)) of the Atomic Act]
Long-term shutdown of a nuclear reactor in the event of nuclear research
the device must be carried out in this way:
and) nuclear fuel from an active zone must be transferred to the warehouse
nuclear fuel,
(b)) must be made of limits and conditions change so as to match the State of the
in the long shutdown of the nuclear facility,
(c)) maintenance, monitoring, testing, inspection, and repair of nuclear facilities must
be carried out in accordance with section 18,
d) measures must be taken to limit the fast aging systems,
structures and components of a nuclear device,
(e) the planned long-term cessation) must be notified to the authority at least 30
days before the start of activities aimed at the long-term decommissioning and
f) long-term cessation of unscheduled must be notified without delay to the Office of
After its launch.
Processes and activities to prevent the development of emergency conditions on nuclear
device and to alleviate their consequences
section 26
[To section 49, paragraph 2 (b), (h)) to the Atomic Act]
(1) in the processes and activities to prevent the development of emergency conditions
the nuclear device and to mitigate the consequences thereof (hereinafter referred to as "system
management of accidents ") must be
and objectives and put in place) a strategy for the management of emergency
conditions that are based on the evaluation of the safety and of the requirements for the
the project of a nuclear device,
(b)) set of measures for management of introduced emergency conditions in accordance
with the objectives and strategies for the management of emergency conditions, which must
include
1. the technical measures for the management of emergency conditions, including
resources to obtain and pass on information about the State of nuclear
the device, and
2. organisational measures for the management of emergency conditions,
(c)) created and maintained for the management of emergency documentation file
conditions,
(d) providing for the management of emergency workers) conditions, trained and
carried out their training in the management of emergency conditions and
e) carried out the analysis for the development of strategies for the management of emergency
conditions and the results of these analyses are used for this development.
(2) the system of management of accident must
and cope with emergency conditions) to allow a nuclear device
initiated in all the States of a nuclear device,
(b)) to enable the mastery of the emergency conditions that occur on all
nuclear facilities situated in the same territory for the location
nuclear device at the same time,
(c)) to enable the mastering of emergency conditions, in which experiencing
current affecting the nuclear reactor and the pool storage of irradiated
nuclear fuel,
d) include rules of mutual support between nuclear devices with
nuclear reactor in the same territory of the nalézajícími to the location of the
nuclear devices in case of emergency conditions on one of the
so, in order not to jeopardize the nuclear safety of nuclear installations
the filling that supports,
(e) include an active link to) management of radioactive waste or
correction of the condition after radiation disaster for the territory of the affected radiation accidents
or for his part so as to mitigate the consequences of the emergency
conditions, and
f) take into account the
1. the expected environmental conditions including extensive damage to
external or internal infrastructure and expected difficult conditions, including
radiation, which may occur during emergency conditions,
2. initiation of the event or events which can emergency conditions
cause, and
3. human resources and the influence of the human factor in emergency management
terms and conditions.
section 27 of the
[To section 49, paragraph 2 (b), (h)) to the Atomic Act]
(1) the documentation file for the management of emergency conditions must include the
and emergency regulations)
(b)) for the management of severe accidents, instructions and
(c)) other documentation for the management of accidents, in particular
1. documentation for the management of the extensive damage to the territory to the location
nuclear facilities and
2. the procedures for the use of alternative resources for coping
emergency conditions.
(2) the documentation file for the management of emergency conditions must allow
workers providing emergency management terms
and prioritization of activities) in managing emergency conditions and
(b)) carrying out activities in the environmental conditions that may occur in the
emergency conditions.
(3) the documentation file for the management of emergency conditions must
and) be created systematically take into account the specific nuclear device, and
correspond to the State of the project of a nuclear device,
(b)) to be in the inner and mutually consistent, and include links to go
between the breakdown regulations and guidance for management of heavy
accidents and
(c) take into account uncertainty in knowledge) about the timing and severity of the
physical phenomena that can occur during emergency conditions,
so that the activities were carried out in managing emergency conditions
means capable of achieving the desired objective.
(4) the documentation file for the management of emergency conditions must be
examined in terms of efficiency and the ability to ensure the management of
emergency conditions before the start of the nuclear power
equipment and before the start of its operation.
(5) the operation of a nuclear facility shall be ensured the continued presence
and the availability of a complete and current set of documentation for the management
emergency conditions to control the workplace.
section 28
[To section 49, paragraph 2 (b), (h)) to the Atomic Act]
(1) the Emergency provisions must
and) establish rules for mastery of basic project accidents and
instructions for the safe recovery of a nuclear installation,
b) lay down rules for the management of advanced project conditions
In addition to the heavy crash and recovery performance of safety instructions
functions or replace their losses,
(c)) to ensure the prevention of severe accidents,
(d)) to allow workers to respond to resulting from the event without its exact
the identification on the basis of symptoms, which are the values of the security
the parameters and the status of essential security features,
(e)) to be based on realistic and for a nuclear device specific
the analysis performed for this purpose,
(f)), without delay, to allow workers to detect emergency conditions, for
which they are intended, and
g) contain the input conditions for application of the procedure, the corresponding
events and output condition to exit this procedure.
(2) the Instructions for the management of severe accidents must
and respond to) allow the resulting event without its exact identification
only on the basis of symptoms, which are the values of safety parameters
determining the status of the physical protective barriers,
(b)) to ensure that limit the development and mitigate the effects of severe accidents and
(c) to establish a strategy for mastering) emergency conditions and physical
identifiable mechanisms affecting the physical security
the barriers that have been identified in the analysis of severe accidents, regardless of the
their probability.
(3) when the verification and validation of the emergency regulations and instructions for the management of
heavy accidents must be checked
and their implied) environmental conditions and of the
in terms of available human resources and
(b) taking into account the impact of) the efficiency of human performance.
(4) for validation of emergency regulations must be used plnorozsahový
the Simulator.
(5) the validation of the emergency regulations must be based on
representative scenarios of emergency conditions.
section 29
[To section 49, paragraph 2 (b), (h)) to the Atomic Act]
(1) the system of management of accidents must be periodically and after special
evaluation of the safety in the event of a radiological emergency at a nuclear
device or on another nuclear device of this type include:
and, if appropriate, updated to ensure that the
a) is in accordance with the current level of science and technology and operational
experience and
(b) the emergency provisions and instructions) for the management of severe accidents are in
accordance with the actual status of the nuclear facilities in the extent
use strategies for the management of emergency conditions.
(2) the results of the verification and validation of the emergency regulations and instructions for the
management of severe accidents before the introduction of the new strategy for the management of
emergency conditions or a fundamental change of the existing strategy for
managing emergency conditions must be incorporated into the emergency
regulations and instructions for the management of severe accidents.
section 30
[To section 49, paragraph 2 (b), (h)) to the Atomic Act]
(1) on the system management of the accident must be ensured and regular training
the exercises in the use of the emergency regulations and instructions for coping with heavy
accidents of workers involved in the management of emergency conditions.
(2) for the training of, and regular exercises in the use of emergency laws
plnorozsahový Simulator must be used.
(3) for training and regular exercises in the use of the instructions for the management of
severe accident simulation tool must be used to allow
waveform modeling different scenarios of severe accidents.
(4) in the system of management of accidents must be committed to regular
practice transition in the use of emergency laws and instructions for
management of severe accidents using the plnorozsahového Simulator.
(5) in the system of management of accidents must be committed to regular
practice interventions laid down the rules and instructions for the breakdown
management of severe accidents, necessary for the restoration of security features
including those that consist in the use of alternative technical
devices or equipment located outside of the area of the nuclear device. When
regular practice these interventions must be taken into account may
the unavailability of the measuring devices, lighting and electric power and
the use of personal protective equipment.
section 31
The effectiveness of the
This Decree shall take effect on the date of 15. February 2017.
Chair:
Ing. Drábová, Ph.d., v. r.
1) Council directive 2009/71/Euratom of 25 June 2002. June 2009, which
establishes a Community framework for the nuclear safety of nuclear installations.
Council directive 2014/87/Euratom of 8 June. July 2014, amending
Directive 2009/71/Euratom establishing a Community framework for
nuclear safety of nuclear installations.
