551/2006 Sb.



DECREE



from day 4. in December 2006,



amending Decree of the Ministry of health no. 38/2001 Coll., on the

hygiene requirements for products intended to come into contact with foodstuffs, and

dishes, as amended



The Ministry of health shall lay down pursuant to § 108 paragraph. 1 of law No.

258/2000 Coll., on the protection of public health and amendment to certain

related laws, as amended by Act No. 273/2001 Coll., Act No.

320/2002 Coll., Act No. 274/2003 Coll., Act No. 392/2005 Coll. and act

No 222/2006 Coll. (hereinafter the "Act"), for the implementation of § 26 para. 1 (b). (b)), and

(d)) of the Act:



Article. (I)



Decree No. 38/2001 Coll. on hygienic requirements for products intended

for contact with food and dishes, as amended by Decree No. 186/2003 Coll. and

Decree No 207/2006, is amended as follows:



1. Footnote 1a is added:



1A) Council Directive 78/142/EEC of 30 June. January 1978 on the approximation of

the legislation of the Member States relating to materials and articles

which contain vinyl chloride monomer intended to come into contact with foodstuffs.



Commission Directive 80/766/EEC of 18 June 1992. July 1980 laying down the

Community method of analysis for the official control of the levels monomerního

of vinyl chloride in materials and articles intended to come into contact with

food.



Commission Directive 81/432/EEC of 29 October April 1981 laying down the

method of analysis for the official control of vinyl chloride released from

materials and articles to foodstuffs.



Council Directive 82/711/EEC of 18 June 1992. October 1982 laying down the

basic rules for testing migration of constituents of plastic materials and articles of them

manufactured and intended for contact with food.



Council Directive 84/500/EEC of 15 October 1968. October 1984 on the approximation of

laws of the Member States relating to ceramic articles intended

to come into contact with foodstuffs.



Council Directive 85/572/EEC of 19 December. December 1985 laying down the

the list of simulants to be used when testing migration of constituents of the materials and

articles of plastics intended to come into contact with foodstuffs.



Commission Directive 93/10/EEC of 15 October 1968. March 1993 on materials and

articles made of regenerated cellulose film intended to come into contact with foodstuffs.



Commission Directive 93/11/EEC of 15 October 1968. March 1993 concerning the release of

N-nitrosamines and N-nitrosatable substances from the teats of soothers

elastomer or rubber.



Commission Directive 93/111/EC of 10 June 1999. December 1993 amending

Directive 93/10/EEC relating to materials and articles made of regenerated cellulose film

intended to come into contact with foodstuffs.



Commission Directive 97/48/EC of 29 April 2004. July 1997, for a second time

amending Council Directive 82/711/EEC laying down the basic rules

necessary for testing migration of constituents of plastic materials and articles

intended to come into contact with foodstuffs.



Commission Directive 2002/72/EC of 6 May 1999. August 2002 on materials and

articles of plastics intended to come into contact with foodstuffs.



Commission Directive 2004/1/EC of 6 May 1999. January 2004 amending Directive

2002/72/EC as regards the suspension of the use of azodicarbonamide as a

blowing agent.



Commission Directive 2004/14/EC of 29 April 2004. January 2004 amending

Directive 93/10/EEC relating to materials and articles made of regenerated cellulose film and

intended to come into contact with foodstuffs.



Commission Directive 2004/19/EC of 1 July 1999. March 2004, amending

Directive 2002/72/EC relating to plastic materials and articles intended for

come into contact with foodstuffs.



Commission Directive 2005/31/EC of 29 April 2004. April 2005 amending the

Council Directive 84/500/EEC as regards a declaration of compliance and criteria

the implementation of the methods of analysis for ceramic articles intended to come into contact with

food.



Commission Directive 2005/79/EC of 18 June 2003. November 2005 amending the

Directive 2002/72/EC relating to plastic materials and articles intended for

contact with food ".



2. In paragraph 19, at the end of paragraph 2 the following sentence "in addition Annex No 9

modifies the requirements of a written statement, which is being equipped with ceramic

products. ".



3. Annex 3:



"Appendix No. 3 to Decree No. 38/2001 Sb.



The requirements on plastics and plastic products



LIST OF MONOMERS, ADDITIVES AND OTHER STARTING SUBSTANCES, WHICH MAY BE

USED FOR MANUFACTURE OF PRODUCTS FROM PLASTIC



1. This annex contains the list of monomers, additives and other default

substances that may be used for the production of plastics and plastic products

intended to come into contact with foodstuffs.



In the list are included



1.1. substances which are subject to polymerization, which includes

polykondenzaci, polyadici or any other similar process creation

macromolecules;



1.2. natural or synthetic substances used for makromolekulové

manufacture of modified macromolecules, if the monomers or the other

starting substances necessary for their manufacture are not included in the list;



1.3. substances used to modify existing natural or

synthetic macromolecular compounds;



1.4. substances which are added to plastics to achieve a technical

effect in the final product, including polymer additives. These substances are

intended to ensure that were included in the final product, and

polymer additives for the purposes of this annex, shall mean all

polymers and prepolymers, oligomers, which may be added to plastics with

order to achieve a technical effect but which cannot be used without other

Polymers as the main structural component of finished materials and articles;



1.5. the substances that are used to create the environment in which

polymerization occurs (e.g. emulsifiers, surfactants,

buffer solutions).



For the purposes of this annex, the substances referred to in paragraphs 1.4 and 1.5 on

referred to as the ingredients.



2. the following are not included in the list of substances, even though they are used

deliberately and are enabled:



2.1. salts of aluminium, calcium, iron, magnesium, potassium and sodium salts

ammonium including double salts and acid salts of authorised acids,

phenols or alcohols. The name "salt" appears in the list only if

the corresponding free acid (free acid) is not listed

(not listed).



2.2. Zinc salt including double salts and acid salts of allowed

acids, phenols or alcohols. For these salts are applied Group

SML = specific migration limit of 25 mg/kg (expressed as zinc). The same thing

restrictions for zinc is applied to:



2.2.1. substances whose names include the term "salt" appears in the list

only if the corresponding free acid (free acid) is not in the

the list (not listed).



2.2.2. the substances referred to in Note 38 of Appendix III to this annex.



3. the following are not included in the list of substances, although they may be

present:



3.1. the substances that may be present in the final product:



3.1.1. impurities in the substances used;



3.1.2. the reaction intermediates;



3.1.3. decomposition products;



3.2. oligomers and natural or synthetic substances and makromolekulové

their mixtures, if the monomers or are starting substances necessary for their

synthesis of included in the list;



3.3. the mixture of permitted substances;



3.4. substances which directly influence the formation of a polymer (such as

catalytic systems);



3.5. dyes;



3.6. the solvent. Products which contain substances listed in section 3.1

up to 3.3 shall meet the requirements provided for in § 3 (1). 1.



4. substances shall be of good technical quality as regards the criteria

purity.



5. For contact with foodstuffs can be used only to products obtained from bacterial

the fermentation process in accordance with Appendix I to this annex.



6. the list contains the following information:



6.1. column 1 (PM/REF No.): the EEC packaging material reference number

for a substance in the list;



6.2. column 2 (CAS No): the CAS registration number (Chemical Abstracts

Service);



6.3. column 3 (name): the chemical name;



6.4. column 4 (restrictions): may contain



6.4.1. the specific migration limit (SML),



6.4.2. the maximum permitted quantity of the substance in the finished material or

product (QM),



6.4.3. the maximum permitted quantity of the substance in the finished material or

the product, expressed in mg per 6 dm2 surfaces in contact with foodstuffs (QMA),



6.4.4. any other restriction specifically mentioned,



6.4.5. any specifications related to the substance or polymer.



7. If a substance that is listed in the list individually, also include

in the General Group, for this group, the restrictions referred to in

individually listed substances.



8. If the number does not correspond to a chemical name, CAS has the chemical name

precedence over the CAS number. If the CAS number, the EINECS, according to registry

does not match the number of CAS in accordance with the CAS registry, the CAS under the CAS registry.



9. In the tables in column 4 are used abbreviations and expressions that have

the following meanings:



DL = limit of quantification of the analytical methods;



FP = final material or product;



NCO = isocyanates;



ND = not to be detected. For the purposes of this order means that the substance

may not be detected by certified analytical method is specified by the

limit of determination (DL). If such a method currently

does not exist, proceed to the elaboration of proven methods the procedure

pursuant to section 4, paragraph 4. (l) Decree.



QM = maximum permitted quantity of the residual substance in the material or

of the product. For the purposes of this Ordinance, the amount of the substance in the material or

the product provides a certified analytical method. If such a method in the

the present time does not exist, proceed to the elaboration of proven methods

According to § 4, paragraph 4. 1.




QM (T) = maximum permitted quantity of the residual substance in the material or

the product, expressed as the total content of listed substances or groups of substances.

For the purposes of this Ordinance, the amount of the substance in the material or the product should

be made for a certified analytical method. If such a method in the

the present time does not exist, proceed to the elaboration of proven methods

According to § 4, paragraph 4. 1.



QMA = maximum permitted quantity of the residual substance in the material or

the product, expressed in mg per 6 dm2 surfaces in contact with foodstuffs.



QMA (T) = maximum permitted quantity of the residual substance in the material or

the product, expressed as the total content of substances or groups of substances listed in

mg per 6 dm2 surfaces in contact with foodstuffs. For the purposes of this order would

the amount of substance in the material or article should be made for a certified

the method of analysis. If such a method does not currently exist,

proceed to the elaboration of proven methods according to § 4, paragraph 4.

1.



SML = specific migration limit in food or in the food

the simulant, unless otherwise noted. For the purposes of this Decree should

be the value of the specific migration of the substance of the material or product set

a verified method of analysis. If such a method currently

does not exist, proceed to the elaboration of proven methods the procedure

pursuant to section 4, paragraph 4. 1.



SML(t) = specific migration limit in food or in the food

simulant expressed as total content of listed substances or groups of

substances. For the purposes of this order, the value of the specific migration of the substance or

a group of substances of a material or product, established a certified analytical

method. If such a method does not currently exist, the procedure

to the drawing up of proven methods according to § 4, paragraph 4. 1.



A LIST OF AUTHORISED MONOMERS AND OTHER STARTING SUBSTANCES



SECTION AND

-------------------------------- --------------------------------------------------------------------

PM/REF constraint name, CAS number, specification

No.

(1) (2) (3) (4)

-------------------------------- --------------------------------------------------------------------

10030 000514-10-3 abietová acid

10060 000075-07-0 acetaldehyde SML(t) = 6 mg/kg (2)

10090-000064 19-7 acetic acid

10120 000108-05-4 vinyl acetate SML = 12 mg/kg

10150 000108-24-7 acetic anhydride

10210 000074-86-2, acetylene

10599/90 061788-89-4 fatty acids, unsaturated QMA (T) = 0.05 mg/6 dm2 (27)

And (C18), dimers, distilled

10599/91 061788-89-4 fatty acids, unsaturated QMA (T) = 0.05 mg/6 dm2 (27)

(C18), dimers, non-distilled

10599/93 068783-41-5 fatty acids, unsaturated (C18), QMA (T) = 0.05 mg/6 dm2 (27)

And dimers, hydrogenated, distilled

10599/93 068783-41-5 fatty acids, unsaturated QMA (T) = 0.05 mg/6 dm2 (27)

(C18), dimers, hydrogenated,

non-distilled

10630 000079-06-1 acrylamide SML = ND (DL = 0.01 mg/kg)

10660 015214-89-8 2-akrylamido-2-SML = 0, 0.05 mg/kg

methylpropanesulfonic acid

10690 000079-10-7 acrylic acid SML(t) = 6 mg/kg (36)

10750 002495-35-4-benzyl-ester SML(t) = 6 mg/kg (36)

10780 000141-32-2, n-butyl-acrylate SML(t) = 6 mg/kg (36)

10810 002998-08-5 sec-butyl-acrylate SML(t) = 6 mg/kg (36)

10840 001663-39-4-tert-butyl ester SML(t) = 6 mg/kg (36)

11005 012542-30-2, dicyklopentenyl-acrylate QMA = 0 mg/6 dm2

11245 002156-97-0-dodecyl ester SML = 0, 0.05 mg/kg (1)

11470 000140-88-5-ethyl-ester SML(t) = 6 mg/kg (36)

11500 000103-11-7, 2-ethylhexyl-acrylate SML = 0, 0.05 mg/kg

11510 000818-61-1-hydroxyethyl acrylate see monoester acrylic

sethylenglykolem acid

11530 000999-61-1, 2-hydroxypropyl acrylate QMA = 0 mg/6 dm2 for the sum of 2-

hydroxypropyl-acrylate and 2-

hydroxyisopropyl-acrylate and in

line sespecifikacemi

set out in Appendix II to this

of the annex.

11590 000106-63-8-isobutyl acrylate SML(t) = 6 mg/kg (36)

11680 000689-12-3-isopropyl ester SML(t) = 6 mg/kg (36)

11710 000096-33-3 methyl-ester SML(t) = 6 mg/kg (36)

11830 000818-61-acrylic acid, monoester with 1 SML(t) = 6 mg/kg (36)

ethylene glycol

11890 002499-59-4-n-Octyl acrylate SML(t) = 6 mg/kg (36)

11980-000925 60-0 propyl-acrylate SML(t) = 6 mg/kg (36)

12100 000107-13-1 acrylonitrile SML = ND

(DL = 0.020 mg/kg, including

uncertainty of measurement)

12130 000124-04-9 adipová acid

004074-90-12265 2 divinyl-adipát QM = 5 mg/kg in FP.

only jakokomonomer.

12280 002035-75-8 adipanhydrid

12310-albumin

12340 — albumin formaldehyde koagulovaný

12375 alcohols, aliphatic, with one

a group of OH, saturated, linear,

primary (C4-C22)

12670-2 002855-13 l-amino-3aminomethyl-3, 5.5-SML = 6 mg/kg

trimethylcyklohexan

12761 000693-57-2 12-aminododecanoic acid acid SML = 0, 0.05 mg/kg

12763 00141-43-5 2-aminoethanol SML = 0, 0.05 mg/kg. Substance

may not be used

in polymers in contact

with the food for which it is to be

According to annex No 4 to this

the Decree used simulant D,

the substance may be used only for

indirect food contact

separate layer PET

12765 84476-12-8 N-(2-aminoethyl)-beta-alanine, sodium SML = 0, 0.05 mg/kg

Salt

12786 000919-30-2, 3-aminopropyltriethoxysilan Residual extractable content

3-aminopropyltriethoxysilanu

must be less than 3 mg/kg

fillers. To be used only for

reactive surface treatment

inorganic fillers.

12788 002432-99-7 11-aminoundekanová acid SML = 5 mg/kg

12789 007664-41-7 ammonia

12820 000123-99-9 azelaic acid

nonandiová acid

12970 004196-95-6 azelanhydrid

anhydrite nonandiové acid

13000 001477-55-0 1.3-benzendimethanamin 1.3-SML = 0, 0.05 mg/kg

bis (aminomethyl) benzene

13060 004422-95-1 trichloride 1, 3, 5-QMA = 0 mg/6 dm2 (measured

benzentrikarboxylové acid as the 1, 3, 5-benzentrikarboxylová

benzene-l, 4-tri (Carbonyl chloride) acid)

13075 000091-76-9 benzoguanamine see 2,4-diamino-6-phenyl-1,3,5-

triazin

13090 000065-85-0 benzoic acid

13150 000100-51-6-benzyl alcohol

13180 000498-66-8 bicyklo [2.2.1] hept-2en, SML = 0 (= mg/kg

norbornen)

13210 001761-71-3 bis (4-aminocyklohexyl) methane SML = 0, 0.05 mg/kg

13317 132459-54-2, N, N '-bis [4-(ethoxykarbonyl) phenyl]-SML = 0, 0.05 mg/kg. The purity of the higher

1, 4, 5, 8-naftalenetetrakarboxy-than 98.1% (w/w). Only for the

diimid use as a komonomer (max. 4%)

for polyesters (PET, PBT)

13323 000102-40-9 1.3-bis (2-hydroxyethoxy) benzene SML = 0, 0.05 mg/kg

13326 000111-46-6 bis (2-hydroxyethyl) ether see diethylene glycol

13380 000077-99-6 2.2-bis (hydroxymethyl)-butane-l-ol; see 1, 1, 1-trimethylolpropan

2-ethyl-2-(hydroxymethyl)-

1.3-diol

13390 000105-08-8 1.4-bis (hydroxymethyl) cyclohexane

13395 04767-03-7 2.2-bis (hydroxymethyl) also named propionic QMA = 0 mg/6 dm2

acid

13480 000080-05-7 2.2-bis (4-hydroxyphenyl) propane SML(t) = 0.6 mg/kg (28)

4, 4 '-(propane-2.2-diyl) difenol

Bisphenol A

13510 001675-54-3-2.2-bis (4-hydroxyphenyl) propane-according to the requirements of Commission Regulation

bis (2,3-epoxypropyl) ether (= No 1895/2005 of

BADGE); 18 November 2005 on the restriction of

2.2-bis [4-(2.3-the use of certain epoxy derivatives

epoxypropoxy) phenyl] propane in materials and articles

intended to come into contact with foodstuffs

13530 038103-06-9 2.2-bis (4-hydroxyphenyl) propane-SML = 0, 0.05 mg/kg

bis (phthalic anhydride)

13550 000110-98-5 bis (hydroxy) ether see dipropylene glycol will

13560 005124-30-1, bis (4-isokyanatocyklohexyl) methane see dicyklohexylmethan-4, 4 '-

diisocyanate

13600 047465-97-4, 3.3-bis (3-methyl-4-hydroxyphenyl-SML = 1.8 mg/kg

indolin-2-on

13607 000080-05-7 Bisphenol A see 13480

2.2-bis (4-hydroxyphenyl)

propane


13610 001675-54-3 Bisphenol A bis (2,3-see 13510

epoxypropyl) ether

(= BADGE) 2.2-bis (4-hydroxyphenyl) propane

bis (2,3-epoxypropyl) ether

13614 038103-06-9 Bisphenol A bis (phthalic anhydride) see 13426

13617 00080-09-1 of Bisphenol a with 4,4 '-see.

dihydroxydifenylsulfon

13620 010043-35-3 boric acid SML(t) = 6 mg/kg (23)

(expressed as boron) without prejudice

without prejudice to the provisions relating to the

indicators of the quality of drinking water

According to a special legal

prescription

13630 000106-99-0 butadiene QM = 1 mg/kg in FP or SML =

ND

(DL = 0.02 mg/kg, including

uncertainty of measurement)

13690 000107-88-0-l, 3-diol

13720 000110-63-4 butane-1.4-diol SML(t) = 5 mg/kg (24)

13780 002425-79-8 1.4-Butanediol-bis (2,3-QM = 1 mg/kg in FP (expressed as

epoxypropyl) ether; as epoxy group, molecular

1.4-bis (2,3-epoxypropoxy) butane weight = 43)



13810 00505-65-7 butane-1.4-diolformal; QMA = 0.05-1.3 mg/6 dm2

dioxepan

13840 000071-36-3-l-ol

13870 000106-98-9-l-en

13900 000107-01-7-2-en

13932 00598-32-3-3-en-2-ol QMA = ND

(DL = 0,02 mg/6 dm2). When you use the

as for the preparation of copolymer

polymeračnípřísady

14020 000098-54-4 4-tert-SML = 0.05 butylfenol mg/kg

14110 000123-77-8 butyraldehyde;

butanaldehyd

14140 000107-92-6 butyric acid;

butanová acid

14170 000106-31-0 butyric acid anhydride;

butananhydrid

14200 000105-60-2, caprolactam; hexano-6-SML(t) = 15 mg/kg (5)

a lactam antibiotic

14230 002123-24-2, caprolactam, sodium salt; SML(t) = 15 mg/kg (5)

hexano-6-lactam, sodium salt (expressed as caprolactam)

14260 000502-44-3 kaprolakton SML = 0.05 mg/kg (expressed as

the sum of the kaprolaktonu and 6-

hydroxyhexanové acid)

14320 000124-07-2 Caprylic acid;

octanoic acid

14350 000630-08-0 carbon monoxide

14380 000075-45-5 Carbonyl chloride QM = 1 mg/kg in FP

14411 008001-79-4 castor oil

14500 009004-34-6 cellulose

14530 007782-50-5 chlorine

14570 000106-89-8 l-chloro-2.3-is see epichlorohydrin

14650 000079-38-9 chlortrifluorethen QMA = 0, 0.05 mg/kg

14680 000077-92-9 citric acid

14710 000108-39-4 m-cresol

14740 000095-48-7 o-cresol

14770 00106-44-5 p-cresol

14800 003724-65-0 krotonová acid; QMA (T) = 0.05 mg/6 dm2 (33)

(E)-2-enoic acid acid



14841 000599-64-4 4-(1-phenyl-1-SML = 0.05 mg/kg

methylethyl) phenol 4-

cumylphenol

14880 000105-08-8 1.4-cyklohexandimethanol see l, 4-bis (hydroxymethyl)

cyclohexane

14950 003173-53-3, cyklohexyl-isocyanate QM (T) = 1 mg/kg in FP

(expressed as NCO) (26)

15030 00931-88-4 cyklookten SML = 0.05 mg/kg. The substance may be

used in polymers in contact with

food, which is referred to in

Annex No. 4 k of the Ordinance

determined using the simulant and

15070-001647 16-1 blanket-l, 9-dien SML = 0.05 mg/kg

15095 000334-48-5-dekanová acid

15100 000112-30-1, Dean-l-ol

15130 000872-05-9 dec-l-en SML = 0.05 mg/kg

15250 000110-60-1 1.4-diaminobutan

15272 000107-15-3 1.2-ethylenediamine diaminoethan see

15274 000124-09-1.6-diaminohexan 4 see hexamethylenediamine

15310 000091-76-9 2.4-diamino-6-phenyl-l, 4-QMA = 5 mg/6 dm2

triazin; 6-phenyl-l, 4-triazin-

2.4-diamine

15565 000106-46-7 1.4-dichlorobenzene SML = 12 mg/kg

15610 00080-07-9, 4, 4 '-dichlordifenylsulfon SML = 0.05 mg/kg

15700 005124-30-1, dicyklohexylmethan-4, 4 '-QM (T) = 1 mg/kg in FP

diisocyanate; (expressed as NCO) (26)

bis (4-

isokyanatocyklohexyl) methane;

4, 4 '-

methylendicyklohexyldiisokyanát

15760 000111-46-6 bis (2-hydroxyethyl) ether; SML(t) = 30 mg/kg (3)

diethylene glycol

15790 000111-40-0 diethylenetriamine SML = 5 mg/kg

15820 000345-92-6 4, 4 '-difluorbenzofenon SML = 0.05 mg/kg

15880 000120-80-9 1.2-dihydroxybenzen; SML = 6 mg/kg

benzene-1.2-diol



15910 000108-46-3 1.3-dihydroxybenzen; SML = 2.4 mg/kg

benzene-1.3-diol

15940 000123-31-9 1.4-dihydroxybenzen; SML = 0.6 mg/kg

benzene-1.4-diol

15970 000611-99-4, 4 '-dihydroxybenzofenon SML(t) = 6 mg/kg (15)

16000 000092-88-6 4, 4 '-dihydroxydifenyl SML = 6 mg/kg

16090 00080-09-1, 4 '-dihydroxydifenylsulfon; SML = 0.05 mg/kg

4, 4 '-sulfonyldifenol

16150 000108-01-0 2-(dimethylamino) ethanol SML = 18 mg/kg

16210 006864-37-5, 3,3-dimethyl-4, 4 '-SML = 0.05 mg/kg (32)

diaminodicyklohexylmethan; For use only in

4, 4 '-methylenebis (2-polyamidech

methylcyklohexan-1-amine)

16240 000091-97-4, 3,3-dimethyl-4, 4 '-QM (T) = 1 mg/kg in FP

diisokyanatodifenyl; (expressed as NCO) (26)

4, 4 '-methylenebis (2

methylfenyl diisocyanate);

bis (4-isokyanato-3-

methylfenyl) methane

16360 000576-26-1, 2.6-dimethylphenol SML = 0.05 mg/kg

16390 00126-30-7 2.2-dimethylpropan-1.3-diol; SML = 0.05 mg/kg

neopentylglykol

16450 000646-06-0 1.3-dioxolan SML = 0.05 mg/kg

16480 000126-58-9 dipentaerythritol

16540 000102-09-0 diphenyl carbonate SML = 0.05 mg/kg

16570 004128-73-8 diphenyl ethers-4, 4 '-diisocyanate QM (T) = 1 mg/kg in FP

(expressed as NCO) (26)

16600 005873-54-1, difenylmethan-2, 4 '-diisocyanate QM (T) = 1 mg/kg in FP

(expressed as NCO) (26)

16630 000101-68-8 difenylmethan-4, 4 '-diisocyanate QM (T) = 1 mg/kg in FP

(expressed as NCO) (26)

16650 000127-63-9 difenylsulfon SML (T) = 3 mg/kg (25)

16660 000110-98-5 dipropylene glycol will

16690 001321-74-0 divinylbenzen QMA = 0.01 mg/6 dm2 or SML = ND

(DL = 0.02 mg/kg, including

uncertainty of measurement) for the sum of

divinylbenzene and

ethylvinylbenzenu and in accordance with the

specifikacemistanovenými in

Appendix II to this annex.

16694 013811-50-2, N, N '-divinylimidazolidin-2-on QM = 5 mg/kg in FP

16697 000693-23-2 dodecanedioic acid

16704 000112-dodec-41-4 1-en SML = 0.05 mg/kg

16750 000106-89-8 epichlorohydrin QM = 1 mg/kg in FP

16780 000064-17-5 ethanol

16950 000074-85-1 ethylene; ethylene

16955 000096-49-1 ethylene carbonate residual content = 5 mg/kg hydrogel

in a maximum ratio of 10 g of hydrogel

on 1 kg of food. Hydrolysate

contains ethylene glycol with a value of

SML = 30 mg/kg

16960 000107-15-3 ethylenediamine SML = 12 mg/kg

16990 000107-21-1 ethane-1.2-diol; SML(t) = 30 mg/kg (3)

ethylene glycol

17005 000151-56-4 the parent SML = ND (DL = 0.01 mg/kg)

17020 000075-21-8 EO QM = 1 mg/kg in FP

17050 000104-76-7 2-ethylhexan-1-ol SML = 30 mg/kg

17110 016219-75-3, 5-ethylidenbicyklo [2.2 l] hept-2-Ene QMA = 0.05 mg/6 dm2

The ratio between the size of the desktop and

plenty of food must be

less than 2 dm2/kg

17160 000097-53-0 eugenol; SML = ND (DL = 0.02 mg/kg,

2-methoxy-4-(propen-2-yl) phenol) including measurement uncertainty)

17170 061788-47-4 fatty acids, coconut

17200 068308-53-2 fatty acids, soya

17230-12 061790-3 fatty acids, tálový oil

17260 000050-00-0 formaldehyde SML(t) = 15 mg/kg (22)

17290 000110-17-8 fumaric acid

17530 000050-99-7 glucose

18010 000110-94-1 glucaric acid

18070 000108-55-4 glutaranhydrid

18100 000056-81-5 glycerol

18220 068564-88-5 N-heptylaminoundekanová acid SML = 0.05 mg/kg (1)

18250 000115-28-6 hexachlorendomethylentetrahydro-SML = ND (DL = 0.01 mg/kg)

ftalová acid;

1, 4, 5, 6, 7, 7,-

hexachlorbicyklo [2.2.1] hept-5-en-


2.3-dikarboxylová acid

18280 000115-27-5 hexachlorendomethylentetrahydro-SML = ND (DL = 0.01 mg/kg)

phthalic anhydride;

anhydride of 1, 4, 5, 6, 7, 7,-

hexachlorbicyklo [2.2.1] hept-5-en-

2.3-dicarboxylic acid

18310 036653-82-4, hexadekan-1-ol

18430 000116-15-4 hexafluorpropylen SML = ND (DL = 0.01 mg/kg)

18460 000124-09-4 hexamethylenediamine SML = 2.4 mg/kg

18640 000822-06-0 hexamethylendiisokyanát; QM (T) = 1 mg/kg in FP (expressed as

hexane-1.6-diyldiisokyanát; as NCO) (26)

1.6-diisokyanatohexan

18670 000100-97-0 hexamethylenetetramine SML(t) = 15 mg/kg (22)

(expressed as formaldehyde)

18700 000629-11-8 hexane-1.6-diol SML = 0.05 mg/kg

18820 000592-41-6 hex-l-en SML = 3 mg/kg

18867 000123-31-9 hydroquinone; benzene-1.4-see dihydroxybenzen

1.4-diol

18880 000099-96-7 of p-hydroxybenzoic acid acid; 4-

Salicylic acid

18896 001679-51-2, 4-(hydroxymethyl) of cyclohex-1-en SML = 0.05 mg/kg

18897 016712-64-4 6-hydroxynaphthalene-2-carboxylic SML = 0.05 mg/kg

acid

18898 000103-90-2, N-(4-hydroxyphenyl) acetamide SML = 0.05 mg/kg

19000 000115-11-7 isobuten

19060 000109-53-5 (vinyl) isobutyl ether QM = 5 mg/kg in FP

19110 04098-71-9 [3-(isokyanatomethyl)-3,5,7, 5-QM (T) = l mg/kg in FP

trimethylcyklohexyl] isocyanate (expressed as NCO)) (26)

19150 000121-91-5 1.3-Benzenedicarboxylic acid; SML = 5 mg/kg

isoftalová acid

19210 001459-93-4 dimethyl-isoftalát SML = 0.05 mg/kg

19243 00078-79-5 isoprene see 2-methylbuta-l, 3-dien

19270 000097-65-4-itakonová acid;

prop-2-en-1.2-dikarboxylová acid

19460 000050-21-5 the lactic acid

19470 000143-07-7 lauric acid;

dodekanová acid

19480 002146-71-6 vinyl-lauric acid esters; Vinyl-

dodekanoát

19490 00947-04-6 laurolaktam; dodekano-12-SML = 5 mg/kg

a lactam antibiotic

19510 011132-73-3 lignocellulose

19540 000110-16-7 maleic acid; (Z)-SML(t) = 30 mg/kg (4)

butenedioic acid

19960 000108-31-6 maleic anhydride SML(t) = 30 mg/kg (4)

(expressed as maleic

acid)

19975 000108-78-1, Melamine; l, 3.5-triazin-2,4,6-see the 2, 4, 6-triamino-l, 4-triazin

triamine

19990 000079-39-0 methakrylamid SML = ND

(DL = 0.02 mg/kg, including

uncertainty of measurement)

20020 000079-81-4, methacrylic acid SML(t) = 6 mg/kg (37)

20050 000096-05-9 allyl methacrylate SML = 0.05 mg/kg

20080 002495-37-6-benzyl-methacrylate SML(t) = 6 mg/kg (37)

20110 000097-88-1 butyl methacrylate SML(t) = 6 mg/kg (37)

20140 002998-18-7 sec-butyl methacrylate SML(t) = 6 mg/kg (37)

20170-07-09 000585 tert-butyl methacrylate SML(t) = 6 mg/kg (37)

20260 00101-43-9 cyklohexyl-SML = 0.05 methacrylate mg/kg

20410 02082-81-methacrylic acid, diester with 7 SML = 0.05 mg/kg

butane-1.4-diol

20440 000097-90-methacrylic acid, diester with 5 SML = 0.05 mg/kg

ethylene glycol

20530 002867-47-2, 2-(dimethylamino) ethyl methacrylate SML = ND

(DL = 0.02 mg/kg, including

uncertainty of measurement)

20590 00106-91-2-2.3-epoxypropyl methacrylate QMA = 0.02 mg/6 dm2

20890 000097-63-2-ethyl-methacrylate SML(t) = 6 mg/kg (37)

21010 000097-86-9 isobutyl methacrylate SML(t) = 6 mg/kg (37)

21100 004655-34-9 isopropyl methacrylate SML(t) = 6 mg/kg (37)

21130 000080-62-6 methyl methacrylate SML(t) = 6 mg/kg (37)

21190 000868-77-9 methacrylic acid monoester with SML(t) = 6 mg/kg (37)

ethylene glycol

21280 0-70-002177 phenyl-methacrylate SML(t) = 6 mg/kg (37)

21340 002210-28-8 propyl methacrylate SML(t) = 6 mg/kg (37)

21370 010595-80-9, 2-sulfoethyl methacrylate QMA = ND

(DL = 0.02 mg/6 dm2)

21400 054276-35-6 sulfopropyl QMA = methacrylate 0.05 mg/6 dm2

21460 000761-93-0 methakrylanhydrid SML(t) = 6 mg/kg (37)

21490 000126-98-7 methakrylnitril SML = ND

(DL = 0.02 mg/kg, including

uncertainty of measurement)

21520 01561-92-8 sodium methallylsulfonát SML = 5 mg/kg

21550 000067-56-1 methanol

21640 00078-79-5 2-methylbuta-1.3-diene QM = 1 mg/kg in FP or SML =

ND

(DL = 0,02 mg/kg, including

uncertainty of measurement)

21730 000563-45-1, 3-methylbut-1-Ene QMA = 0.006 mg/6 dm2. Only for the

use in polypropylene.

21765 106246-33-7, 4, 4 '-methylenebis (2-chloro-2.6-QMA = 0.05 mg/6 dm2

diethylanilin)

21821 00505-65-7 1.4-(methylendioxy) butane see butane-l, 4-diolformal

21940 000924-42-5 N-methylolakrylamid SML = ND (DL = 0.01 mg/kg)

22150 000691-37-2-(methyl) pent-1-Ene SML = 0.05 mg/kg

22210 000098-83-9 alpha-methylstyren SML = 0.05 mg/kg

22331 025513-64-8 mixture (35-45% w/w) 1.6-diamino-QMA = 5 mg/6 dm2

2.2, 4trimethylhexanu and (55-65%

w/w) l, 6-diamino-2, 4.4-

trimethylhexanu

22332 028679-16-5 a mixture of (40% w/w), 2, 2, 4-QM (T) = 1 mg/kg in FP (expressed as

trimethylhexanu and 1.6-as NCO) (26)

diyldiisokyanátu (60% w/w) 2, 4, 4,-

trimethylhexan-1.6-diyldiisokyanátu

22350 000544-63-8-myristová acid;

tetradekanová acid

22360 01141-38-4, naphthalene-2.6-dikarboxylová acid SML = 5 mg/kg

22390 000840-65-3 dimethyl-2.6-naftalendikarboxylát SML = 0.05 mg/kg

22420 003173-72-6 1.5-naphthalene diisocyanate-QM (T) = 1 mg/kg in FP (expressed as

as NCO) (26)

22437 00126-30-7 neopentylglykol see 2.2-dimethylpropan-l, 3-diol

22450 009004-70-0 nitrocellulose

22480 000143-08-8 nonan-1-ol

22550 000498-66-8 norbornen see bicyklo [2.2.1] hept-2-Ene

22570 000112-96-9 oktadecylisokyanát; 1-QM (T) = 1 mg/kg in FP (expressed as

isokyanatooktadekan as NCO) (26)

22600 000111-87-5 octane-l-ol

22660 000111-66-0 okt-l-en SML = 15 mg/kg

22763 000112-80-1 oleic acid

22775 000144-62-7 oxalic acid SML(t) = 6 mg/kg (29)

22778 07456-68-0, 4, 4 '-oxybis (benzensulfonylazid) QMA = 0.05 mg/6 dm2

22780 000057-Palmitic acid, 10-3;

hexadekanová acid

22840 000115-77-5 of pentaerythritol

22870 000071-41-0, pentan-1-ol

22900 00109-67-1, pent-1-en SML = 5 mg/kg

22932 001187-93-5 perfluormethylperfluorvinylether SML = 0.05 mg/kg. To use only

for non-stick surfaces.

22937 001623-05-8 perfluorpropyl (perfluorvinyl) ether SML = 0.05 mg/kg

22960 000108-95-2 phenol

23050 000108-46-2 1.3-Phenylenediamine SML = ND

(DL = 0.02 mg/kg, including

uncertainty of measurement)

23070 000102-39-6 (1.3-fenylendioxy) dioctová acid QMA = 0.05 mg/6 dm2

23155 000075-45-5 see phosgene Carbonyl chloride

23170 007664-38-2 phosphoric acid

23175 000122-52-1, triethyl-fosfit QM = ND (DL = 1 mg/kg in FP)

23187 — see Terephthalic acid, ftalová acid

23200 000088-99-3-ftalová acid

23230 000131-17-9 diallyl-phthalate SML = ND (DL = 0.01 mg/kg)

23380 000085-44-9 phthalic anhydride

23470 000080-56-8 alpha-pinene

23500 000127-91-3 beta-pinene

23547 009016-00-6 polydimethylsiloxane (molecular in accordance with specifications

063148-62-9 weight higher than 6 800) set out in Appendix II to this

Annex

23590 025322-68-3 polyethylene glycol

23650 025322-69-4 polypropylene glycol (molecular

weight greater than 400)

23651 025322-69-4 polypropylene glycol

23740 000057-55-6 propane-1.2-diol

23770 000504-63-2 propane-1.3-diol SML = 0.05 mg/kg

23800 000071-23-8-l-ol

23830 000067-63-0 propan-2-ol

23860 000123-38-6 propionaldehyde;

propanaldehyd

23890 000079-09-4-propionic acid

23920 000105-38-4 vinyl-propanoát SML(t) = 6 mg/kg (2)

(expressed as acetaldehyde)

23950 000123-62-6 propionanhydrid

23980 000115-07-1 propylene; Glycogen

24010 000075-56-9 propylene oxide QM = 1 mg/kg in FP

24051 000120-80-9 catechol; benzene-1.2-see dihydroxybenzen

1.2-diol

24057 000089-32-7 pyromellitanhydrid SML = 0.05 mg/kg (expressed as

pyromellitovákyselina)

24070 073138-82-6 resin acids and rosin

acid

24072 000108-46-3 1.3-dihydroxybenzen see resorcinol

24073 000101-90-6 (diglycidyl) resorcinol ether QMA = 0.005 mg/6 dm2. Substance cannot be

be used in polymers in contact


with food, which is referred to in

of annex 4 to this Ordinance

provided for the use of the simulant D

the substance may be used only for

indirect contact spotravinami,

separate layer PET

24100 008050-09-7 Rosin

24130 008050-09-7 kalafunová resin see Rosin

24160-10-6 008052 kalafunový talový oil

24190 008050-09-7 kalafunová resin see Rosin

24250 009006-04-6 rubber, natural

24270 000069-72-7 salicylic acid; 2-

Salicylic acid

24280 000111-20-6 sebacic acid;

dodecanedioic acid

24430 002561-88-8 sebakanhydrid;

dekandiové acid anhydride

24475 001313-82-2 sodium sulfide

24490 000050-70-4, sorbitol

24520 008001-22-7 soybean oil

24540 009005-25-8 starch, food

24550 000057-11-4 stearic acid;

oktadekanová acid

24610 000100-42-5 styrene

24760 026914-43-2, styrensulfonová acid SML = 0.05 mg/kg

24820 000110-succinic acid, 15-6

24850 000108-30-5, amber acid anhydride

24880 000057-50-1 sucrose

24887 006362-79-4, 5-sulfoisoftalová acid, SML = 5 mg/kg

monosodium salt

24888 003965-55-7 dimethyl ester 5-sulphoisoftalové SML = 0.05 mg/kg

acid, monosodium salt

24903 068425-17-2, syrups, hydrolysed starch, in accordance with the specifications

hydrogenated set out in Appendix II to this

Annex

24910 000100-21-0 the Terephthalic acid SML = 7.5 mg/kg

24940 000100-20-Terephthalic acid dichloride 9 SML(t) = 7.5 mg/kg (expressed as

as Terephthalic acid)

24970 000120-61-6-dimethyl terephthalate

25080 001105-36-1, tetradec-1-en SML = 0.05 mg/kg

25090 000112-60-7 tetraethylenglykol

25120 000116-14-3 tetrafluorethylen SML = 0.05 mg/kg

25150 000109-99-9 tetrahydrofuran SML = 0.6 mg/kg

25180 000102-60-3 N, N, N ', N '-tetrakis (2-hydroxypropyl)

ethylenediamine

25210 000584-84-9 toluene-2.4-diisocyanate QM (T) = 1 mg/kg in FP (expressed as

as NCO) (26)

25240 000091-08-7 2.6-toluene diisocyanate-QM (T) = 1 mg/kg in FP (expressed as

as NCO) (26)

25270 026747-90-0 2.4-toluene diisocyanate, dimer-QM (T) = 1 mg/kg in FP (expressed as

as NCO) (26)

25360 — 2.3-epoxypropyl-trialkyl (C5-C15) QM = 1 mg/kg in FP

acetate (expressed as epoxy group

molecular weight = 43)

25380 — vinyl-trialkyl (C7-C17) acetates QMA = 0.05 mg/6 dm2

(= vinyl-versatáty)

25385 000102-70-5 triallylamin in accordance with the specifications

set out in Appendix II to this

of the annex.

25420 000108-78-1, 2, 4, 6-triamino-l, 4-triazin SML = 30 mg/kg

25450 26896-48-0 tricyklodekandimethanol SML = 0.05 mg/kg

25510 000112-27-6 triethylene glycol

25540 000528-44-9 trimellitic acid SML(t) = 5 mg/kg (35)

25550 000552-30-7 trimelitanhydrid SML(t) = 5 mg/kg (35)

(expressed as trimellitic

acid)

25600 000077-99-6, 1, 1, 1-trimethylolpropan; SML = 6 mg/kg

2-ethyl-2-(hydroxymethyl)-1.3-

diol

25840 003290-92-4 2.2-bis (methakryloxymethyl)-yl-SML = 0.05 mg/kg

methacrylate

25900 00110-88-3 trioxan SML = 0.05 mg/kg

25910-44-0 024800 tripropylenglykol

25927 027955-94-8, 1, 1, 1 '-tris (4-hydroxyphenyl) ethan QM = 0.5 mg/kg in FP. only for

use in polykarbonátech.

25960 000057-13-6 urea

26050 000075-01-4 vinyl chloride see. the requirements of this order

26110 000075-35-4 vinylidene chloride QM = 5 mg/kg in FP or

SML = ND

(DL = 0.05 mg/kg)

26140 000075-38-7 vinyliden-fluoride SML = 5 mg/kg

26155 001072-63-5 1-vinylimidazol QM = 5 mg/kg in FP

26170 003195-78-6 N-vinyl-N-methylacetamid QM = 2 mg/kg in FP

26320 002768-02-7 vinyltrimethoxysilan QM = 5 mg/kg in FP

26360 007732-18-5 water in accordance with the

special legislation,

that stanovípožadavky on

drinking water.

-------------------------------- --------------------------------------------------------------------



SECTION B



LIST OF MONOMERS AND OTHER STARTING SUBSTANCES, WHICH MAY BE USED TO

PENDING A DECISION ON INCLUSION IN SECTION A

-------------------------------- --------------------------------------------------------------------

PM/REF No. CAS no constraint name, specifications

(1)

(2) (3) (4)

-------------------------------- --------------------------------------------------------------------

13050 00528-44-9 1, 2, 4-trimellitová acid, benzentrikarboxylová acid, see

15730 00077-73-6 dicyclopentadiene

18370 000592-45-0 hexa-l, 4-dien

21970 00923-02-4 N-methylolmethakrylamid

26230 000088-12-0 Vinylpyrrolidone

-------------------------------- --------------------------------------------------------------------



AN INCOMPLETE LIST OF ADDITIVES WHICH MAY BE USED FOR THE PRODUCTION OF PLASTIC



SECTION AND



---------------------------------- ------------------------------------------------------------------------------- --------------

PM/REF No. CAS no constraint name, specifications

(1) (2) (3) (4)

---------------------------------- ------------------------------------------------------------------------------- --------------

30000-000064 19-7 acetic acid

30045 000123-86-4 butyl acetate

30080 004180-12-5 acetic acid, měďná salt SML (T) = 5 mg/kg (7)

(expressed as copper)

30140 000141-78-6 ethyl acetate

30280 000108-24-7 acetic anhydride

30295 000067-64-1 Acetone

30340 330198-91-9 2.3-bis (acetoxy) propyl 12-(acetoxy) stearic



30370-acetyloctová acid, salts

30401-ACETYLATED mono-and diglycerides of fatty acids

C2-C24, aliphatic 30610 linear monocarboxylic acids

natural oils and fats and their mono-, di-and triglycerides

(including branched-chain fatty acids as naturally

occur in nature)

30612 synthetic C2-C24, aliphatic, linear, monocarboxylic

acids and their mono-di-and triglycerides

30960-esters of aliphatic, monocarboxylic acids (C6-C22)

polyglycerolem

31328-fatty acids from animal or vegetable edible

fats and oils

31530 123968-25-2 2.4-diterc-pentyl-6-[l-(3,5-di-tert-pentyl-2-SML = 5 mg/kg

hydroxyphenyl) ethyl] phenyl-acrylic

31542 174254-23-0-methyl acrylate, Telomere with 1-dodekanethiolem, C16-C18 QM = 0.5% (w/w) in FP

alkyl esters

31730 000124-04-9 adipová acid

33120-alcohols, aliphatic, with one group of OH, saturated,

linear, primary (C4-C24)

33350 009005-32-7 alginic acid

33801-n-alkyl (C10-C13) BENZENESULFONIC ACID SML = 30 mg/kg

34240-esters, alkyl (C10-C20) sulphonic acids with phenols SML = 6 mg/kg

34281 alkylsírové acids (C8-C22), linear, primary, with an even

the number of carbon atoms

34475-fosforitan calcium-hydroxide, aluminium hydrate

34480-aluminium fibers, flakes and powders

34560 021645-51-2 aluminum hydroxide

34690 011097-59-9-uhličitanhořečnato-aluminium hydroxide

001344-28-34720 1 aluminium oxide

34850 143925-92-2 oxidized dialkylminy technically hydrogenated QM = only for

use:

and) in polyolefinech

in quantities of up to 0.1% (w/w),

but not in LDPE, which is

intended to come into contact with foodstuffs,

for that is referred to in annex No.

4 to this Decree laid down

specified by the reduction factor less

than 3;

(b)) in the PET in a quantity in the

0.25% (w/w), which is

intended to come into contact

with the food with the exception of

those for whom is referred to in

of annex 4 to this Ordinance

provided for the use of the simulant

(D).

34895 00088-68-2-6 aminobenzamid SML =

0.05

mg/kg

The substance may be used only

for the PET that is designed for

come into contact with drinking water and drinks.

35120 013560-49-1 thiobis (2-hydroxyethyl), 3-3-aminokrotonové acid



35160 06642-31-5 to 6-amino-1.3-dimethyluracil SML =

5 mg/kg



35170 00141-43-5 2-aminoethanol SML = 0.05

mg/kg. The substance should not be used in polymers in contact with

the food, for which, according to annex No 4 to this Ordinance

provided for the use of the simulant D; the substance may be used only


for indirect food contact, separated from food

a layer of PET

35284 00111-41-1, N-(2-hydroxyethyl) ethane-1.2-diamine SML = 0.05 mg/kg.

The substance must not be

used in polymers

in contact with the

the food, for which

According to annex No 4

This Decree

provided for use

simulant D; the substance may only be

only be used for

indirect contact with

food, separated

from food coating

PET

35320 007664-41-7 ammonia

35440 012124-97-9 ammonium bromide

35600 001336-21-6 ammonium hydroxide

35760 001309-64-4 carbon antimonitý SML(t) = 0.04 mg/kg

(39) (expressed as

antimony)

35840 000506-30-9-arachidová acid

007771-35845 44-0 arachidonic acid

36000 000050-81-7 Ascorbic acid

36080 000137-66-askorbyl 6-palmitate; askorbyl-hexadekanoát

36160 010605-09-1 askorbyl stearate

36840 012007-55-5 tetraboritan barium SML (T) = l mg/kg (12)

(expressed as

barium) and

SML(t) = 6

mg/kg (23)

(expressed as

as the bor),

without the

without prejudice to the

Special

legal

prescription,

fixing the

provides for the

the requirements for the

drinking water.

36880 008012-89-3 beeswax

36960 003061-75-4 behenamid

37040 000112-85-6 behenová acid

37280 001302-78-9 bentonite

37360 000100-52-7 benzaldehyd in accordance with note

(9) in Appendix III to this

of the annex.

37600 000065-85-0 benzoic acid

37680 000136-60-7 butyl benzoate



37840 000093-89-0 ethyl benzoate

38080 000093-58-3 methyl benzoate

002315-38160 68-6 propyl benzoate

38510 136504-96-6 1.2-bis (3-aminopropyl) ethylenediamine, N-butyl polymers-SML = 5 mg/kg

2, 2, 6, 6,-tetramethyl-4-piperidinaminem, and 2, 4, 6-trichloro-

l, 3,5-triazine

38515 001533-45-5, 4, 4 '-bis (2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene) stilben SML = 0.05 mg/kg (1)

38810 080693-00-1-3.9-bis (2,6-di-tert-butyl-4-methylfenoxy)-

2, 4, 8, 10-

tetraoxa-3.9-

difosfaspiro

[5.5] undekan

(bis (2,6-di-SML = 5 mg/kg (sum of

tert-butyl-4-fosfitů and phosphate)

methylfenyl)

pentaerythhh

ritol-

difosfit)

38840 154862-43-8 bis (2,4-dikumylfenyl) pentaerythritoldifosfit SML = 5 mg/kg (as

the sum of a substance,

its oxidized forms of

bis (2.4-dikumylfenyl)

pentaerythritolfosfátu

and its product

the hydrolysis of 2.4-

dikumylfenol)

38879 135861-56-2 bis (3,4-dimethylbenzyliden) sorbitol

38950 079072-96-1 bis (4-ethylbenzyliden) sorbitol

39200 006200-40-4, bis (2-hydroxyethyl)-2-hydroxy-3-SML = 1.8 mg/kg

(dodecyloxy)-metnylamonium chloride

39680 000080-05-7 2.2-bis (4-hydroxyphenyl) propane SML(t) = 0.6 mg/kg

(28)

39815 182121-12-6 9.9-bis (methoxymethyl) Fluorene QMA = 0.05 mg/6 dm2

39890 087826-41-3-069158-41-bis (methylbenzyliden) sorbitol

4 054686-081541-97-4

12-0

129228-21-39925 3 3.3-bis (methoxymethyl)-2.5-dimethylhexan SML = 0.05 mg/kg

40120 068951-50-8 bis (polyethylene glycol) hydroxymethyl fosfonát;

[SML = 0.6 (hydroxymet mg/kg

hyl) fosforyl

] bis [polyoxyethylene sorbitan]



40320 010043-35-3 boric acid SML(t) = 6 mg/kg (23)

(expressed as

as the bor),

without prejudice to the

without prejudice to the

the provisions of the

Special

the rule of

prescription,

fixing the

provides for the

the requirements for the

drinking water.

40400 010043-11-5 Boron Nitride

40570 000106-97-8 butane

40580 000110-63-4 butane-1.4-diol SML(t) = 5 mg/kg (24)

41040 005743-36-2 calcium butyrate

41120 10043-52-4 calcium chloride

41280 001305-62-0 calcium hydroxide

41520 001305-78-8 calcium oxide

41600 012004-14-7

037293-22-4 calcium sulfohlinitan

41680 000076-22-2 camphor in accordance with note

(9) in Appendix III to this

of the annex.

41760 008006-44-8 wax kandelilla

41840 00105-60-2, caprolactam SML(t) = 15 mg/kg (5)

41960 000124-07-2 Caprylic acid; octanoic acid

42160 000124-38-9 carbon dioxide

42320 007492-68-4 copper carbonate SML(t) = 5 mg/kg (7)

(expressed as copper)

42500-carbonic acid, salts

42640 009000-11-7 carboxymethylcellulose

42720 008015-86-9 carnauba wax

42800 009000-71-9 casein

42880 008001-79-4 castor oil

42960 064147-40-6 castor oil, anhydrous

43200-castor oil, mono-and diglycerides of

43280 009004-34-6 cellulose

43300 009004-36-8-cellulose acetate butyrate

43360 068442-85-3 cellulose, regenerated

43440 008001-75-0 ceresin

43480 064365-11-3 activated carbon, in accordance with

specifications

set out in the Appendix

(II) of this annex.

43515-cholinesterů chlorides fatty acids, Coco, QMA = 0.9 mg/6 dm2

44160 000077-92-9 citric acid

44640 000077-93-0-methyl citrate

45195 007787-70-4 copper bromide SML(t) = 5 mg/kg (7)

(expressed as copper)

45200 001335-23-5 copper iodide SML(t) = 5 mg/kg (7)

(expressed as copper)

SML (T) = l mg/kg (11)

(expressed as iodine)

45280-cotton fibres

45450 068610-51-5 reaction product of p-cresol,

with

dicyklopenta

dienem and

isobutylene

;

p-cresol-SML = 5 mg/kg

dicyklopenta

die-

isobutylene,

copolymer

45560 014464-46-1 kristobalit

45600 003724-65-0 krotonová acid; (E)-2-enoic acid acid QMA (T) = 0.05 mg/6

DM2 (33)

45640 005232-99-5-ethyl 3.3-diphenyl-2-Cyanoacrylate;

SML = 0.05 mg ethyl ester/kg

Acid 2-

kyano-3.3-

diphenyl-

Acrylic

45760 000108-91-8 cyclohexylamine

45920 009000-16-2, dammar

45940 000334-48-5 n-dekanová acid

46070 010016-20-3 Alpha-dextrin

46080 007585-39-9 beta-dextrin

46375 061790-53-2 diatomaceous earth

46380 068855-54-9 anhydrous sodium carbonate, diatomaceous earth, calcined from melt

46480 032647-67-9 dibenzyliden-sorbitol

46700 5.7-di-tert-butyl-3-(3,4-and 2.3-

dimethylfeny

benzofuran-l)

2 (3 h)-one,

containing:

and) 5.7-di-tert-butyl-3-(3,4-

dimethylfeny

benzofuran-l)

2 (3 h)-one (80

up to 100 m/m.

%), a

b) 5.7-di-tert-butyl-3-

(2.3-

dimethylfeny

benzofuran-l)

2 (3 h)-one (0

up to

20. %), SML = 5 mg/kg

46720 004130-42-1, 2.6-di-tert-butyl-4-ethylfenol QMA = 4.8 mg/6 dm2

46790 004221-80-1, 2.4-di-tert-butylfenylester 3.5-di-tert-butyl-4-

hydroxybenzoic acids

46800 067845-93-6 hexadecylester 3.5-di-tert-butyl-4-Hydroxybenzoic acid

acid

46870 003135-18-0 dioktadecylester 3.5-di-tert-butyl-4-hydroxybenzylfosfonové

acid

46880 065140-91-2 monoethyl-(3,5-di-tert-butyl-4-hydroxybenzyl) fosfonát, SML = 6 mg/kg

calcium salt

47210 26427-07-6 of dibutyl-thiocíničitan, polymer; thiobis (butylcín sulfide), in accordance with the

polymer specifications in

Appendix II to this

of the annex.

47440 000461-58-5 dikyanodiamid

47540 27458-90-8 di-tert-dodecyl-disulfide SML = 0.05 mg/kg

47680 000111-46-6 bis (2-hydroxyethyl) ether; diethylene glycol SML(t) = 30 mg/kg (3)

48460 000075-37-6-1.1-difluorethan

48620 00123-31-9 1.4-dihydroxybenzen SML = 0.6 mg/kg

48720 00611-99-4, 4.4 '-dihydroxybenzofenon SML(t) = 6 mg/kg

(15)

49485 134701-20-5 2.4-dimethyl-6-(l-methylpentadecyl) phenol SML = 1 mg/kg

49540 000067-68-5 dimethylsulfoxide

51200 000126-58-9 dipentaerythritol

51700 147315-50-2-2 (4.6-diphenyl-l, 4-triazin-2-yl)-5-(hexyloxy) phenol SML = 0.05 mg/kg)

51760 025265-71-8-98-5 000110 dipropylene glycol will

52640 016389-88-1 of the Dolomites

52645 10436-08-5 cis-11-eikosenamid

000112 52720-84-5 erukamid

52730 000112-86-7 eruková acid

52800 000064-17-5 ethanol

53270 037205-99-5 ethylkarboxymethylcelulóza

53280 009004-57-3 ethyl cellulose

53360 000110-31-6 N, N '-ethylenbis (oleamid)

53440 005518-18-3 N, N '-ethylenbis (palmitamid)

53520 000110-30-5 N, N '-ethylenbis (stearamid)

53600 000060-00-4 edetic acid

53610 054453-03-1 ethylenediaminetetraacetate, copper salt SML (T) = 5 mg/kg (7)

(expressed as copper)

53650 000107-21-1 ethane-1.2-diol (ethylene glycol) SML(t) = 30 mg/kg (3)

54005 005136-44-7-N-palmitamid-N '-stearamid

54260 009004-58-4 ethylhydroxyethylcelulóza


54270-ethylhydroxymethylcelulóza

54280-ethylhydroxypropylcelulóza

54300 118337-09-0 2, 2 '-ethyliden-bis (4,6-di-tert-butyl-phenyl) fluorfosfonit SML = 6 mg/kg

54450 – fats and oils of animal or vegetable food sources

54480 fats and oils of animal or vegetable sources

food, hydrogenated

54930 025359-91-5-1-naphthol, copolymer; Poly (1-SML = 0.05 mg/kg

hydroxynaftylmethan)]

55040 000064-18-6 Ant acid

55120 000110-17-8 fumaric acid

55190 029204-02-2-gadoleová acid

55440 009000-70-8 gelatin

55520-glass fibres

55600-glass microspheres

55680 000110-94-1 glucaric acid

55920 000056-81-5 glycerol

56020 099880-64-5 glycerol dibehenate; glycerol-didokosonoát

56360-acetic acid esters of glycerol

56486 esters of glycerol with acids, aliphatic, saturated,

linear, with an even number of carbon atoms (C14-C18) and with

acids, aliphatic, unsaturated, linear,

an even number of carbon atoms (C16-C18)

glycerol, esters with 56487-butyric acid

glycerol, esters with 56490-erucic acid

glycerol, esters with 56495-12-hydroxystearovou acid

56500-glycerol esters with lauric acid

56510-glycerol esters with linoleic acid

56520-myristovou acid esters of glycerol

56535-nonanovou acid esters of glycerol

56540-acid esters of glycerol with

56550-acid Palmitic acids esters of glycerol

56570-propionic acid esters of glycerol

glycerol, esters with 56580-ricinoleic acid

glycerol, esters with 56585-stearic acid

56610 030233-64-8 monobehenát glycerol

56720 026402-23-3 monohexanoát glycerol

56800 030899-62-8 monolaurát-glycerol diacetate

56880 026402-26-6 monooktanoát glycerol

57040-monooleátu glycerol ester with Ascorbic acid

57120-monooleátu ester of glycerol with citric acid

57200 monopalmitátu glycerol-ester with Ascorbic acid

57280-monopalmitátu ester of glycerol with citric acid

glycerol monostearate 57600-ester with Ascorbic acid

57680-ester of glycerol monostearate with citric acid

57800 018641-57-1 glyceryl-tri (dokosanoát)

57920 000620-67-7 triheptanoát glycerol

58300-glycine, salts

58320 007782-42-5 graphite

58400 009000-30-0 guar resin

58480 009000-01-5 Gum Arabic

58720 000111-14-8 heptanoic acid

59280 000100-97-0 hexamethyletetraamin; SML(t) = 15 mg/kg

(22)

(expressed as

as

formaldehyde)

1, 3, 5, 7-tetraazaadamantan

59360 000142-62-1, hexanová acid

59760 019569-21-2 huntit

007647-01-59990 0 hydrochloric acid

60030-90 012072-1 hydromagnesit

60080 012304-65-3 hydrotalkit

60160 000120-47-8-ethyl-4-hydroxybenzoát

60180 004191-73 5-isopropyl-4-hydroxybenzoát

60200 000099-76-3-methyl-4-hydroxybenzoát

60240 000094-13-3-4-propyl hydroxybenzoát

60480 003864-99-1, 2-(2-hydroxy-3.5-di-tert-butyl-phenyl)-5-chlorbenzotriazol SML(t) = 30 mg/kg (19)

60560 009004-62-0 hydroxyethylcelulóza

60880 009032-42-2 hydroxyethylmethylcelulóza

61120 009005-27-0 hydroxyethylový starch

61390 037353-59-6 hydroxymethylcelulóza

61680 009004-64-2 hydroxypropylcellulose

61800 009049-76-7 hydroxypropylový starch

61840 000106-14-9 12-hydroxystearic acid acid

62140 006303-21-5-fosforná acid

62240 001332-37-2 iron oxide

62245 012751-22-3 iron phosphide only for polymers and

PET copolymers

62450 003252-78-4 isopentan

008001 62640-39-6 Japan wax

62720 001332-58-7 kaolin

62800-kaolin, calcined

62960 000050-21-5 the lactic acid

63040 000138-22-7 butyl lactate

63280 000143-07-7 lauric acid

63760 008002-43-5 lecithin

63840 000123-77-2, levulová acid

63920 000557-59-5 lignocerová acid

64015 000060-33-3 linoleic acid

64150 028290-79-1, linolenic acid

64500-lysine, salts

64640 001309-42-8 magnesium hydroxide

64720 001309-48-4 magnesium oxide

64800 00110-16-7 maleic acid SML(t) = 30 mg/kg (4)

64990 025736-61-2, maleic anhydride-styrene, copolymer, sodium salt in accordance with

specifications

set out in the Appendix

(II) of this annex.

65020 006915-Malic acid, 15-7

65040 000141-82-2, malonová acid

65520 000087-78-5 mannitol

65920 66822-60-4 sodium-[N-methakryloyloxyethyl-N, N-dimethyl-N-

carboxymethyl-ammonium-chloride-oktadecyl methacrylate-

ethyl methacrylate-cyklohexyl methacrylate-N-vinyl-2-

pyrrolidone copolymer, copolymers

66200 037206-01-2 methylkarboxymethylcelulóza

66240 009004-67-5 methyl cellulose

66560 004066-02-8 2, 2 '-methylene-bis-(4-methyl-6-cyklohexylfenol) SML (T) = 3 mg/kg (6)

66580 000077-62-3, 2 '-methylene-bis [4-methyl-6-(l-methylcyklohexyl) phenol] SML (T) = 3 mg/kg (6)

66640 009004-59-5 methylethylcelulóza

66695-methylhydroxymethylcelulóza

009004 66700-65-3 methylhydroxypropylcelulóza

66755 002682-20-4 2-methyl-4-isothiazolin-3-one SML = ND

(DL = 0.02

mg/kg,

including

uncertainty

measurement)

66905 000872-50-4, N-methylpyrrolidone, an excipient

66930 068554-70-1 methylsilseskvioxan Residual monomer

methylsilseskvioxanu;

mg < l

methyltrimet

hoxysilanu

/kg

methylsilses

kvioxanu

67120 012001-26-2 MICA

67155 mixture of 4-(2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene)-4 '-(5-methyl-2-0.05%

4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene) stilbene, 4, 4 '-bis (2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene) stilbene and weight (the amount of

4, 4 '-bis (5-methyl-2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene) stilbene substance used/quantity of the

of the product). In accordance

with the specifications

set out in the Appendix

(II) of this annex.

67200 001317-33-5 molybdeničitý sulfide

67840 montanové acid esters with ethyleneglycol them and/or

butane-1.3-propanediol, 1,2,3-propanetriol

67850 008002-53-7 montanový wax

67891 000544-63-8-myristová acid

68040 003333-62-8 7-[2 h-nafto-(l, 2-D) triazole-2-yl]-3-fenylkumarin

68078 027253-31-2, neodekanová acid, cobalt salt;

7.7-SML(t) = 0.05 mg/kg

dimethyloktanová

acid,

salt of cobalt

(expressed as

as

neodekanová

acid) and

SML (T) =

0.05 mg/kg

(14)

(expressed as

as cobalt)

Substance cannot be

be used

in polymers

intended for

come into contact with

food,

for which it is

According to the

Annex No. 4

to this

the Decree

set

simulant D.

68125 037244-96-5 nefelinsyenit

68145 080410-33-9, 2 ', 2 ''-nitrilo [triethyl-tri (3,3 ', 5,5 '-tetra-tert-butyl-SML = 5 mg/kg (sum of

1,1 '-biphenyl-2, 2 '-diyl) fosfit] fosfitů and phosphate)

68960 000301-02-0 oleamid

69040 000112-80-1 oleic acid

69760 000143-28-2 oleylalkohol

69920 000144-62-7 oxalic acid SML(t) = 6 mg/kg (29)

70000 070331-94-1, 2 '-oxamidobis [ethyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)-

propionate]

70240 012198-93-5 ozokerit

70400 000057-Palmitic acid, 10-3

71020 000373-49-9 palmitoleic acid

71440 009000-69-5 pectin

000115 71600-77-5 of pentaerythritol

71635 025151-96-6 2.2-bis (hydroxymethyl)-l, 3-diol-

di ((z)-9-

butenoate)

SML = 0.05 (pentaerythr mg/kg.

Mannitol-must not be used in

dioleát) polymers in contact with

the food, for which

Annex No 4 to

This Decree

determined by the simulant D.

71670 178671-58-4 pentaerythritol tetrakis (2-kyano-3.3-di-fenylakrylát) SML = 0.05 mg/kg

71680 006683-19-8 pentaerythritol tetrakis [3-(3,5-di-tert-butyl-4-

-hydroxyphenyl) propionate]

71720 000109-66-0 pentane

72640 007664-38-2 phosphoric acid

73160-mono-and di-n-alkyl (C16 and C18) esters of phosphoric acids, SML = 0.05 mg/kg

73720 000155-96-8 (trichlorethyl)-phosphate SML = ND

(DL = 0.02

mg/kg,

including

uncertainty

measurement)

74010 145650-60-8 bis (2,4-di-tert-butyl-6-methylfenyl) ethyl-fosfit SML = 5 mg/kg (sum of

fosfitů and phosphate)

74240 031570-04-4-tris (2,4-di-tert-butylfenyl)-fosfit

74480 000088-99-3-ftalová acid

76320 000085-44-9 phthalic anhydride

76415 019455-79-9 Pimelic acid, calcium salt



76721-00-6 009016 polydimethylsiloxane (Mw > 6 800) in accordance with the

063148-62-9 specifications


set out in the Appendix

(II) of this annex.

76730-polydimethylsiloxane, gamma-hydroxypropylovaný SML = 6 mg/kg

76815 polyester of adipic acid with glycerol or in accordance

pentaerythritol, esters with an even number of carbon atoms

fatty acids, C12-C22

specifications

laid down

in the Appendix

In this annex.

76845 031831-53-5 1.4-Butanediol with polyester kaprolaktonem in accordance with the

specifications

set out in the Appendix

(II) of this annex.

76866 polyesters propane-1.2-diol, butane-1.3-diol, butane-l, 4-SML = 30 mg/kg

diol, polypropylenglykolu acid, adipovou, which

they may be forced to shut down groups derived from acetic acid

or fatty acids, C12-C18 or octane-1-OL, Dean-1-OL

76960 025322-68-3 polyethylene glycol

77370 070142-34-6 poly (ethylene glycol-30) dipolyhydroxystearát

77600 061788-85-0 polyethylene glycol ester

with

hydrogenated

ricínovým

oil

aliphatic esters of polyethylene glycol with 77702 monokarboxylovými

acids (C6-C22) and their ammonium and sodium sulphates

77895 068439-49-6 ether polyethylene glycol (EO = 2-6) and monoalkylu (C16-C18) SML = 0.05 mg/kg and in

accordance with the

specifications in the

Appendix II to this

Annex

79040 009005-64-5 polyethylene glycol sorbitan monolaurát

009005 79120-65-6 sorbitan monooleate polyethylene glycol

79200 009005-66-7, sorbitan monopalmitate polyethylenglycolu

79280 009005-67-8 sorbitan monostearate polyethylene glycol

79360 009005-70-3 sorbitan trioleate polyethylene glycol

79440 009005-71-4 sorbitan tristearát polyethylene glycol

79600 009046-01-9 poly (ethylene glycol) tridecylether phosphate SML = 5 mg/kg. For

materials and articles

intended only for contact

with aqueous foodstuffs.

In accordance with the

specifications

set out in the Appendix

(II) of this annex.

009002 80000-88-4 polyethylene wax

029894 80240-35-7 ricinoleát homopolymer

80640-polyoxyalkyl (C2-C4) dimethylpolysiloxan

80720 008017-16-1 polyfosforečné acid

80800 025322-69-4 polypropylene glycol

81060 009003-07-0 polypropylene wax

192268-64 81220-7 poly [[6-[N-(2, 2, 6, 6,-tetramethylpiperidin-

4-yl)-n-

butylamino]-

l, 3.5-

triazin-2.4-

diyl] [N-

(2, 2, 6, 6

tetramethylp

iperidin-4-

Abdurrahman YL)] hex

an-l, 6-

diyl [N-

(2, 2, 6, 6

tetrametnylpiperidin-4-

Abdurrahman YL)]]-

Alpha-

[N, N, N ', N '-

tetrabutyl-

N''''-

(2, 2, 6, 6

tetramethylp

iperidin-4-

ylamino) hexes

l] [l, 4-

triazin-

2, 4, 6

triamino]-co-

N, N, N ', N '-

tetrabutyl-

l, 3.5-

triazin-2.4-SML = 5 mg/kg

diamine

087189-25-81515 1 zinc polyglycerolát SML(t) = 25 mg/kg (38)

(expressed as zinc)

81520 007758-02-3 potassium bromide

81600 001310-58-3 potassium hydroxide

81760 powders, flakes and fibres of brass, bronze, copper, stainless SML(t) = 5 mg/kg (7)

steel, Tin and alloys of copper, Tin and iron

(expressed as

as copper)

SML = 48

mg/kg

(expressed as

as iron)

81840 000057-55-6 propane-1.2-diol

81882 000067-63-0 propan-2-ol

82000 000079-09-4-propionic acid

82080 009005-37-2 1.2-propylene glycol alginate

82240 022788-19-8 dilaurát 1.2-propylene glycol

82400 000105-62-4 dioleát 1.2-propylene glycol

82560 033587-20-1 dipalmitát 1.2-propylene glycol

82720 006182-11-2 distearát 1.2-propylene glycol

82800 027194-74-7 monolaurát 1.2-propylene glycol

82960 001330-80-9 1.2-propylene glycol monooleát

029013-83120 28-3 monopalmitát 1.2-propylene glycol

83300-001323 39-3 1.2-propylene glycol monostearate

propylhydroxyethylcelulóza-83320

83325-propylhydroxymethylcelulóza

83330-propylhydroxypropylcelulóza

83440 002466-09-3 difosforečná acid

83455 013445-56-2, difosforitá acid

83460 012269-78-2 pyrophyllit

83470 014808-60-7 quartz

83599 68442-12-6 reaction products of 2-sulfonylethyl-oleátu with Dichloro-SML(t) = 0.18 mg/kg

dimethylcínem, sulfidem and trichlormethylcínem

(16)

(expressed as

as Tin)

073138 83610-82-6 resin acids and rosin acids

83840 008050-09-7 Rosin

84000 008050-31-5 Rosin, ester with 1,2,3-propanetriol

84080 008050-26-8 Rosin, ester with pentaerythritol

84210 065997-06-0 Rosin, hydrotreated

84240 065997-13-9 hydrotreated, Rosin, ester with 1,2,3-propanetriol

84320 008050-15-5 hydrotreated, Rosin, ester with methanol

84400 064365-17-9 Rosin, ester with pentaerythritol, hydrotreated

84560 009006-04-6 rubber, natural

84640 000069-72-7 salicylic acid

85360 000109-43-3, dibutyl dekandioát

85601-natural silicates (except asbestos)

85610-silicates, natural, silanized (except asbestos)

85680 01343-98-2 silicic acid

85840 053320-86-8 lithium-sodium-silicate magnesium SML(t) = 0.6 mg/kg (8)

(expressed as

Lithium)

silicic acid, 86000-silylovaná

86160 000409-21-2 silicon carbide

86240 007631-86-9 silica

86285-silica, silanizovaný

86560 007647-15-6 sodium bromide

86720 001310-73-2 sodium hydroxide

87040 001330-43-4 disodium tetraborate SML(t) = 6 mg/kg (23)

(expressed as boron),

without prejudice to the

the provisions of the Special

legislation,

laying down the

requirements for drinking

water

87200 000110-44-1, sorbic acid

87280 029116-98-1 sorbitan dioleát

87520 062568-11-0 sorbitan monobehenát

87600 001338-39-2 sorbitan monolaurát

87680 001338-43-8 sorbitan monooleate

87760 026266-57-9 sorbitan monopalmitate

87840 001338-41-6 sorbitan monostearate

87920 061752-68-9 sorbitan tetrastearát

88080 026266-58-0 sorbitan trioleate

88160 054140-20-4 sorbitan tripalmitát

88240 026658-19-5 sorbitan tristearát

88320 000050-70-4, sorbitol

88600 026836-47-5 sorbitol monostearate

88640 008013-07-8 oil from soybeans, oxidised SML = 60 mg/kg. However,

in the case of

PVC sealing

jars with the starting and

follow-on formula

nutrition according to the

a special legal

the regulation establishing the

regulate the requirements for the

food

intended for special

nutrition and the way they

use, or with the

grain and other

foods for infants and

small children under this

the decree is SML

reduced to 30 mg/kg.

In accordance with the

specifications in the

Appendix II to this

of the annex.

88800 009005-25-8 starch, food

88880 068412-29-3, starch, hydrolyzed

88960 000124-26-5 stearamid

89040 000057-11-4 stearic acid

89200 007617-31-4 copper stearate SML(t) = 5 mg/kg (7)

expressed as copper

89440-esters of stearic acid with ethylenklykolem SML(t) = 30 mg/kg (3)

90720 058446-52-9 stearoylbenzoylmethan

90800 005793-94-2-stearoyl 2-lactic acid, calcium salt

90960 000110-succinic acid, 15-6

91200 000126-13-6-acetate isobutyrát sucrose

91360 000126-14-7 oktaacetát sucrose

91840 007704-34-9 sulfur

91920 007664-93-9 sulfuric acid

92030 010124-44-4 copper sulfate SML(t) = 5 mg/kg (7)

expressed as copper

014807-96-92080 6 TALC

92150 01401-55-4 of tannin acid in accordance with

JECFA specifications

92160 000087-69-4, tartaric acid

92195-TAURINE, salts

92205 057569-40-1, 2 '-methylenebis (4-methyl-6-tert-butylfenol) 3

Terephthalic acid

92350 000112-60-7 tetraethylenglykol

92640 000102-60-3 N, N, N ', N '-tetrakis (2-hydroxypropyl) ethylenediamine

92700 078301-43-6, 2, 2, 4, 4,-tetramethyl-20 (2,3-epoxypropyl)-7-oxa-3.20-SML = 5 mg/kg

diazadispiro [5.1.11.2]-heneikosan-21-on polymer

120218 92930-34-0 thiodiethylenbis (5-methoxykarbonyl-2.6-dimethyl-1.4-SML = 6 mg/kg

dihydropyridine-3-carboxylate

93440 013463-67-7 Titanium dioxide

93520 000059-02-9

010191-41-0 alpha-tocopherol

93680 009000-65-1 rubber tragant

93720 00108-78-1, 2, 4, 6-triamino-l, 4-triazin SML = 30 mg/kg

94320 000112-27-6 triethylene glycol


94960 000077-99-6 2-ethyl-2-(hydroxymethyl)-1.3-diol SML = 6 mg/kg

95000-028931 67-1 poly [2,2-bis (hydroxymethyl) butan-1-ol-trimethakrylát]-co-

methyl methacrylate

95200 001709-70-2 1, 3, 5-trimethyl-2,4,6-tris (3,5-di-tert-butyl-4-

hydroxybenzyl) benzene

95270 161717-32-4, 6-2, 4-tris (tert-butyl) phenyl-2-butyl-2-ethylpropan-1.3-diol-SML = 2 mg/kg (as

sum of fosfitu phosphate, phosphate

and the product

hydrolysis = TTBP)

95725 110638-71-6 vermiculite, reaction product with lithium citrate SML(t) = 0.6 mg/kg (8)

expressed as lithium

95855 007732-18-5 the water in accordance with a special

by law,

laying down the

requirements for drinking

water

95859 waxes, refined, derived from petroleum or synthetic in accordance with

hydrocarbons specifications

listed in Appendix II

of this annex

95883 White mineral oil, paraffin, obtained zropných in accordance with the

hydrocarbons specifications

listed in Appendix II

of this annex

013983-17-95905 0 wollastonit

95920-wood flour and fibers, unmodified

011138 95935-66-2 xanthan gum

96190 020427-58-1 zinc hydroxide SML = 25 mg/kg (38)

(expressed as zinc)

96240 96320 001314-13-2

001314-98-3 zinc oxide zinc sulphide SML = 25 mg/kg (38)

(expressed as zinc)

SML = 25

mg/kg (38)

(expressed as

as zinc)

---------------------------------- ------------------------------------------------------------------------------- --------------



SECTION B



---------------------------------- ------------------------------------------------------------------------------- --------------

PM/REF. CAS no constraint name, specifications

---------------------------------- ------------------------------------------------------------------------------- --------------

30180 02180-18-9 manganese acetate SML(t) = 0.6 mg/kg

(10) (expressed as

manganese)

31500 31520 025134-51-4 61167-58-6 acrylic acid-2-ethylhexyl-acrylate copolymer,

2-tert-butyl-SML(t) = 6 mg/kg (36)

6-(3-tert-(expressed as

butyl-2-like acrylic

hydroxy-5-acid) and SML

methylbenzyl = 0.05 mg/kg

)-4-(expressed as

methylfenyl-2-ethylhexyl-acrylate)

Acrylic SML = 6 mg/kg

31920 00103-23-1, bis (2-ethylhexyl) hexandioát-bis (2-ethylhexyl)-adipát SML = 18 mg/kg (1)

34230-alkyl (C8-C22) sulphonic acids SML = 6 mg/kg

151841-34650 65-5 bis-hydroxide [2, 2 ' methylbis (4,6-di-tert-SML = 5 mg/kg

butylfenyl) aluminium phosphate]

35760 01309-64-4 carbon antimonitý SML = 0.02 mg/kg

(expressed as

antimony and including

uncertainty of measurement)

36720 36800 17194-00-2 10022-31-8 barium hydroxide barium nitrate SML(t) = 1 mg/kg (12)

(expressed as

barium) SML(t) = 1

mg/kg (14) (expressed as

as barium)

38240 00119-61-9 is refluxed with SML = 0.6 mg/kg

38560 07128-64-5 of 2.5-bis (5-tert-butyl-2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene) Thiophene SML = 0.6 mg/kg

38700 63397-60-4, bis (2-karbobutoxyethyl) Tin-bis (isooktylsulfanylacetát) SML = 18 mg/kg

38000 000553-54-8 lithium benzoate SML(t) = 0.6 mg/kg

(8)

(expressed as

as

Lithium)

38505 351870-33-2, cis-endo-bicyklo [2.2.1] heptane-2.3-dikarboxylová acid, SML = 5

di-sodium salt of mg/kg.

Do not use

with

polyethylene

m in the

contact

with sour

food.

Purity > =

96%.

38800 32307-78-8 N, N '-bis (3-(3,5-di-tert-butyl-4-SML = 15 mg/kg

hydroxyphenyl) propionyl) hydrazid

38820 26741-53-7 bis (2,4-di-tert-butylfenyl) pentaerythritoldifosfit SML = 0.6 mg/kg

38940 110675-26-8 2.4-bis (dodecylthiomethyl)-6-methylphenol SML(t) = 5 mg/kg (40)

39060 35958-30-6 l, l-bis (2-hydroxy-3.5-di-tert-butylfenyl) ethane SML = 5 mg/kg

39090-N, N-bis (2-hydroxyethyl) tallow alkyl (C8-C18) amin SML(t) = 1.2 mg/kg

(13)

39120 N, N-bis (2-hydroxyethyl) tallow alkyl (C8-C18) amin-hydrochloridy SML(t) = l, 2 mg/kg

(14) (expressed as

N, N-bis (2-

hydroxyethyl) alkyl (C8-

C18) amine)

40000 00991-84-4 2.4-bis (oktylsulfanyl)-6-(4-hydroxy-3.5-di-tert-SML = 30 mg/kg

butylanilino)-l, 4-triazin

40020 110553-27-0 2.4-bis [(oktylthiomethyl)-6-methyl] phenol SML(t) = 5 mg/kg (40)

40160 61269-61-2, N, N '-bis (2, 2, 6, 6-tetramethylpiperid-4-yl) hexamethylenediamine-SML = 2.4 mg/kg

1.2-dibromoethane, copolymer

40720 025013-16-2 5-tert-butyl-4-methoxyphenol; tert-butyl-4-hydroxyanisole (= SML = 30 mg/kg

BHA)

40800 13003-12-8, 4, 4 '-butylidenbis (6-tert-butyl-3-SML = 6 mg/kg

methylfenylditridecylfosfit)

40980 19664-95-0, butanová acid, manganese salt SML(t) = 0.6

mg/kg (10)

(expressed as

manganese)

42000 63438-80-2 (2-karbobutoxyethyl) Tin-tris (isooktylsulfanylacetát) SML = 30 mg/kg

42400 10377-37-4 Lithium Carbonate SML(t) = 0.6

mg/kg

(8)

(expressed as

as

Lithium)

42480 00584-09-8 rubidium carbonate SML = 12 mg/kg



43600 04080-31-3, 1-(3-chlorallyl)-3,5,7, 7-triaza-l-azoniaadamantan-SML = 0.3 mg chloride/kg

43680 00075-45-6 chlordifluormethan SML = 6 mg/kg

accordance with the

specifications

set out in the Appendix

(II) of this annex.

44960 11072-61-3 carbon kobaltitý SML(t) = 0.05 mg/kg

(14)

(expressed as

as cobalt)

45440-stryenované butylované cresols SML = 12 mg/kg

46640 000128-37-0 2.6-di-tert-butyl-4-methylphenol; (= BHT) SML = 3 mg/kg

47600 84030-61-5 di-n-dodecylcínbis (isooktylsulfanylacetát) SML = 12 mg/kg

48640 00131-56-6 2.4-dihydroxybenzofenon SML(t) = 6 mg/kg (15)

48800 00097-23-4-2, 2 '-dihydroxy-5, 5 '-dichlordifenylmethan SML = 12 mg/kg

48880 00131-53-3, 2 '-dihydroxy-4-methoxybenzophenone SML(t) = 6 mg/kg (15)

49595 057583-35-4 dimethylcínbis (-merkaptoacetát) SML(t) = 0.18 mg/kg

(16)

(expressed as

as Tin)

49600 026636-01-1 dimethylcínbis (isooktyl-sulfanylacetát) SML(t) = 0.18 mg/kg

(16)

(expressed as

as Tin)

49840 02500-88-1 dioktadecyl-disulfide SML = 3 mg/kg

50160-di-n-oktylcínbis (n-alkyl (C10-C16) SML(t) = 0.006 mg/kg

sulfanylacetát) (17)

(expressed as

as Tin)

50240 010039-33-5 di-n-oktylcínbis (2-ethylhexyl maleate) SML(t) = 0.006 mg/kg

(17)

(expressed as

as Tin)

50320 015571-58-1 di-n-oktylcínbis (2-ethylhexyl-SML(t) = 0.006 mg/kg

sulfanylacetát) (17)

(expressed as

as Tin)

50360 di-n-oktylcínbis (ethyl maleate) SML(t) = 0.006 mg/kg

(17)

(expressed as

as Tin)



50400 033568-99-9 di-n-oktylcínbis (isooktyl maleate) SML(t) = 0.006 mg/kg

(17)

(expressed as

as Tin)

50480 026401-97-8 di-n-oktylcínbis (isooktylsulfanylacetát) SML(t) = 0.006 mg/kg

(17)

(expressed as

as Tin)

50560 50640 003648-18-8 di-n-oktylcínbutan-l, 4-diol-bis (sulfanylacetát)

di-n-SML(t) = 0.006 mg/kg

oktylcíndido (17)

Decanoate di-(expressed as

n-as Tin)

oktylcíndila urate SML (T) =

0.006 mg/kg

(17)

(expressed as

as Tin)



50720 015571-60-5 di-n-oktylcíndimaleinát SML(t) = 0.006 mg/kg

(17)

(expressed as

as Tin)

50800 di-n-oktylcíndimaleinát, esterified SML(t) = 0.006 mg/kg

(17)

(expressed as

as Tin)

50880 di-n-oktylcíndimaleinát, polymers (n = 2-4) SML(t) = 0.006 mg/kg

(17)

(expressed as

as Tin)

50960 69226-44-4 di-n-oktylcínethylenglykolbis (sulfanylacetát) SML(t) = 0.006 mg/kg

(17)

(expressed as

as Tin)

51040 15535-79-2 di-n-oktylcínsulfanylacetát SML(t) = 0.006 mg/kg

(17)

(expressed as

as Tin)

51120 di-n-oktylcínthiobenzoát [(2-ethylhexyl)-sulfanylacetát] SML(t) = 0.006 mg/kg

(17)

(expressed as

as Tin)

51570 00127-63-9 difenylsulfon SML = 3 mg/kg (25)

51680 00102-08-9 N, N '-difenylthiomočovina SML = 3 mg/kg

52000 27651-87-0 dodecylbenzensulfonová acid SML = 30 mg/kg

52320 52047-59-3, 2-(4-dodecylfenyl) indole SML = 0.06 mg/kg

52880 23676-09-7-ethyl-4-ethoxybenzoát SML = 3.6 mg/kg

53200 23949-66-8 2-ethoxy-2 '-ethyloxanilid SML = 30 mg/kg

54880 55200 000050-00-0 formaldehyde 001166 -52-

5

sodium dodecyl-SML (T) = 15


3, 4, 5-mg/kg

trihydroxybe

nzoát;

dodechl-

gallate

(22)

SML(t) = 30 mg/kg



(34)

55280 55360 001034-01-1 000121 -79-Octyl-3, 4-trihydroxybenzoát;

58960 9 00057-09-0

Octyl gallate-

propyl-3, 4-

trihydroxybe

nzoát;

propyl-

gallate

hexadecyltri SML(t) = 30

methylamoniu mg/kg

m bromide

(34)

SML (T) =

30 mg/kg

(34)

SML = 6

mg/kg

59120 23128-74-7 l, 6-bis [3-(3,5-di-tert-butyl-4-SML = 45 mg/kg

hydroxyphenyl) propanamid] cyclohexane

59200 36145-77-2 l, 6-bis [3-(3,5-di-tert-butyl-4-

hydroxyphenyl SML = 6 mg/kg

) propanoát] (c)

yklohexan

60320 70321-86-7, 2-(2-hydroxy-3.5-bis (1,1-dimethylbenzyl) phenyl) benzotriazol SML = 1.5 mg/kg

60400 03896-11-5, 2-(2 '-3 '-hydroxy-tert-butyl-5 '-methylfenyl)-5-SML(t) = 30 mg/kg (19)

chlorbenzotriazol

60800 61280 65447-77-0-97-03293 8 dimethyl ester [1-(2-hydroxyethyl)-4-hydroxy-, SML = 30 mg/kg of SML (T)

2, 2, 6, 6-tetramethylpiperidin]-, 2-sukcinátu = 6 mg/kg (15)

4-hydroxy-n-hexyloxybenzofenon

61360 00131-57-7, 2-hydroxy-4-methoxybenzophenone SML(t) = 6 mg/kg (15)

61440 02440-22-4, 2-(2-hydroxy-5-methylfenyl) benzotriazol SML(t) = 30 mg/kg (19)

61600 01843-05-6, 2-hydroxy-4-n-oktyloxybenzofenon SML(t) = 6 mg/kg (19)

63200 51877-53-3 manganatá salt of lactic acid manganum-SML(t) = 0.6 mg/kg

dilaktát (10) (expressed as

manganese)

63940 008062-15-5 lignosulphonic acid SML = 0.24 mg/kg and to

use as a

nebulizer for

dispersion of plastics.

64320 10377-51-2 lithium iodide SML(t) = 1 mg/kg (11)

(expressed as iodine) and

SML(t) = 0.6 mg/kg (8)

(expressed as

Lithium)

65120 07773-01-5 manganese chloride SML(t) = 0.6 mg/kg

(10) (expressed as

manganese)

65200 12873-88-9 manganese hydroxide SML(t) = 0.6 mg/kg

(10) (expressed as

manganese)

65280 10043-84-2 manganese hypofosfit SML(t) = 0.6 mg/kg

(10) (expressed as

manganese)

65360 11129-60-5 from manganese oxide SML(t) = 0.6

mg/kg (10)

(expressed as

manganese)

65440 dicalcium manganese SML(t) = 0.6 mg/kg

(10)

(expressed as

manganese)

66350 085209-93-2, 2 '-methylenebis 4-(4,6-di-tert-butylphenyl) SML = 5 mg/kg

and

lithiumfosfát SML(t) = 0.6

mg/kg (8)

(expressed as

Lithium)

66360 85209-91-2, 2 '-methylenebis (4,6-di-tert-butylfenyl)-sodium-phosphate SML = 5 mg/kg

66400 00088-24-2, 2 '-methylenebis 4 (4-ethyl-6-tert-butylfenol) SML(t) = 1.5 mg/kg

(20)

66480 00119-47-1, 2 '-methylenebis (4-methyl-6-tert-butylfenol) SML(t) = 1.5 mg/kg

(20)

67180 mixture of (50% w/w) n-decyl n-Octyl-phthalate, (25% w/w) di-SML = 5 mg/kg (1)

and-decyl phthalate and (25% w/w) di-n-Octyl phthalate

67360 67649-65-4 mono-n-dodecylcíntris (isooktyl-sulfanylacetát) SML = 24 mg/kg

67515 057583-34-3 monomethylcíntris (ethylhexylmerkaptoace SML(t) = 0.18 mg/kg

melt) (16)

(expressed as

as Tin)

67520 55980-38-6 monomethylcíntris (isooktyl-sulfanylacetát) SML(t) = 0.18 mg/kg

(16)

(expressed as

as Tin)

67600-mono-n-oktylcíntris (alkyl (C10-C16)-SML (T) = l, 2 mg/kg

(18)

sulfanylacetát) (expressed as Tin)

67680 27105-89-7 mono-n-oktylcíntris (2-SML (T) = l, 2 mg/kg

(18)

ethylhexyl-sulfanylacetát) (expressed as Tin)

67760 19687-86-5 mono-n-oktylcíntris (isooktyl-SML (T) = l, 2 mg/kg

(18)

sulfanylacetát) (expressed as Tin)

67896 020336-96-3 lithium-tetradekanoát; SML(t) = 0.6 mg/kg

(8)

Lithium-myristate (expressed as

Lithium)

68320 02082-79-3, oktadecyl-3-(3,5-di-tert-butyl-4-hydroxylfenyl) propanoát SML = 6 mg/kg

68400 10094-45-8 oktadecyl-(Z)-dokos-9-enamid oktadecylerukamid SML = 5 mg/kg

68860 004724-48-5 n-oktylfosfoniová acid SML = 0.05 mg/kg

69160 014666-94-5 oleic acid, cobalt salt SML(t) = 0.05 mg/kg

(14) (expressed as

as cobalt)

69840 16260-09-6 N-(Z)-(z)-9-en-1-ylhexadekanamid oleylpalmitamid SML = 5 mg/kg

71935 007601-89-0 sodium perchlorate, sodium SML = 0.05 mg/kg (31)

72160 00948-65-2, 2-fenylindol SML = 15 mg/kg

72800 01241-94-7-2-ethylhexyl diphenyl phosphate SML = 2.4 mg/kg

73040 13763-32-1 phosphoric acid, lithium salt SML (T) = 0.6 mg/kg

(8) (expressed as

Lithium)

73120 10124-54-6 phosphoric acid, manganese salt SML(t) = 0.6 mg/kg

(10) (expressed as

manganese)

74400 tris (nonylfenyl) ester of fosforité acid

or

TRIS (dinonyl

phenyl) ester

acid

fosforité

TRIS (nonyl, SML = 30 mg/kg

dinonylfenyl

)-fosforitan

76681-poly (cyklopentadien), hydrogenated SML = 5 mg/kg (1)

77440-polyethylene glycol-di (12-hydroxyoktadec-9

-butenoate)

polyethyleng SML = 42 mg/kg

lykol-

diricinoleát

77520 61791-12-6 polyethylenglykolester castor oil SML = 42 mg/kg

78320 09004-97-1 polyethylene glycol-12-hydroxyoktadec-9-e

noát

polyethyleng SML = 42 mg/kg

lykol-

monoricinole

át

71878 81200-19-8 poly (6-[(l, l, 3.3-tetramethylbutyl) amino]-

l, 3.5-

triazin-2.4-

diyl]-

[(2, 2, 6, 6

tetramethylp

iperid-4-

Abdurrahman YL)] hex

amethylen [(2

, 2, 6, 6

tetramethylp SML = 3 mg/kg

iperid-4-

Abdurrahman YL)]

81680 07681-11-0 potassium iodide SML(t) = 1 mg/kg

(11) (expressed as

JOD)

82020 19652-51-3, also named propionic acid, cobalt salt SML(t) = 0.05 mg/kg

(14)

(expressed as

Cobalt)

83595 119345-01-6 reaction product of di-tert-butylfosfonitu SML = 18 mg/kg

with the bifenylem obtained by condensation of 2.4-di-in accordance

with

tert-butylfenolu with Friedelovy products-specifications

Craftovy reaction of pbr3 and chloride contained in Appendix II

bifenylu this annex.

83700 00141-22-0 (Z)-12-hydroxyoktadec-9-enoic acid ricinolejová acid SML = 42 mg/kg

acid

84800 00087-6-3 4-terobutylfenyl-salicylate SML = 1.2 mg/kg

84880 00119-36-8 methyl-salicylate SML = 30 mg/kg

85760 12068-40-5 lithium-aluminium silicate SML(t) = 0.6 mg/kg

(8) (expressed as

Lithium)

85920 12627-14-4 lithium silicate SML(t) = 0.6 mg/kg

(8) (expressed as

Lithium)

85950 037296-97-2 silicic acid, sodium-fluoride salt SML = 0.15 mg/kg

magnesium (expressed as

fluoride). Only to the

use in layers

multilayer

materials that

do not come into contact with

food.

86480 007631-90-5 sodium bisulfite SML(t) = 10 mg/kg

(30)

(expressed as

as SO2)

86800 07681-82-5 sodium iodide SML(t) = 1 mg/kg

(11) (expressed as

JOD)

86880-sodium monoalkyl dialkylfenoxybenzendisulfonát-SML = 9 mg/kg

86920 007632-00-0 sodium nitrite SML = 0.6 mg/kg

86960 007757-83-7 sodium sulfite SML(t) = 10 mg/kg

(30)

(expressed as

as SO2)

87120 002421-98-7 sodium thiosulfate SML(t) = 10 mg/kg

(30)

(expressed as

as SO2)

89170 13586-84-0, oktadekanová acid, kobaltnatá salt SML(t) = 0.05 mg/kg

stearic acid, kobaltnatá salt (14)

(expressed as

Cobalt)

92000 07727-43-7 barium sulfate SML(t) = 1 mg/kg

(12) (expressed as

barium)

92320-tetradecylpolyethylenglykol (EO = 3-8) ether SML = 15 mg/kg

glycolic acid



PM/REF. CAS no constraint name, specifications

92560 38613-77-3 tetrakis (2,4-di-tert-butylfenyl) biphenyl-4, 4 '-ylen-SML = 18 mg/kg

diifosfonit

92800 00096-69-5 '-thiobis (6-tert-butyl-3-methylphenol) SML = 0.48 mg/kg

41484 92880 93120-35-9 00123-28-4 (thiodiethanolbis, 3-(3,5-di-tert-butyl-4-

hydroxyphenyl

) propanoát)

didodecyl-SML = 2.4 mg/kg


thiodipropan SML(t) = 5 mg/kg (21)

oát

93280 00693-36-7 dioktadecyl-thiodipropanoát SML(t) = 5 mg/kg (21)

94400 94560 036443-68-2-20-3 00122 triethylene glycol bis [3-(3-tert-butyl-

4hydroxy-5-

methylfenyl)

propanoát]

triisopropan SML = 9 mg/kg SML = 5

olamin mg/kg

95265 227099-60-7 1, 3, 5-(4-benzoylfenyl) benzene SML = 0.05 mg/kg

95280 40601-76-1 1, 3, 5-tris (4-tert-butyl-3-hydroxy-2.6-dimethylbenzyl) -1,3, 5-SML = 6 mg/kg

triazin-2,4,6 (lH, 3 h, 5 h)-trion

95360 27530-62-6 l, 4-tris (3,5-di-tert-butyl-4-

hydroxybenzyl)

1, 1, 3, 5

triazin-

2, 4, 6

(1 h, 3 h, 5 h)-SML = 5 mg/kg

Trion

95600 01843-03-4 1 1 3-tris (2-methyl-4-hydroxy-5-tert-butylfenyl) butane SML = 5 mg/kg



APPENDIX I



PRODUCTS OBTAINED BY THE FERMENTATION OF BACTERIAL

---------------------------------- ------------------------------------------------------------------------------- --------------

PM/Ref. CAS no constraint name, specifications

No.

(1) (2) (3) (4)

---------------------------------- ------------------------------------------------------------------------------- --------------

18888 080181-31-3, 3-hydroxybutanová acid, and in accordance with the specifications set out in the Appendix

3-hydroxypentanová acid, (II) of this annex

copolymer

---------------------------------- ------------------------------------------------------------------------------- --------------



APPENDIX II



SPECIFICATIONS



Part a: general specifications



Materials and products made using aromatic isocyanate, or

colouring matters must not be released diazokopulací-ready primary aromatic

amines (expressed as aniline) in stanovitelném the quantity (DL = 0.02

mg/kg of food or food simulant, analytical tolerance including).

The migration values of primary aromatic amines listed in this annex

This limitation may not apply.



Part b: other specifications

-------------------------------------- ---------------------------------------------

PM/Ref. Other specifications

No

-------------------------------------- ---------------------------------------------

11530 (2-hydroxypropanesulfonate ||-1-yl)-Acrylic

Can contain up to 25% (w/w) 2-hydroxyisopropyl-acrylate (CAS No

002918-23-2)

16690 divinylbenzen

Can contain up to 45% ethyl benzene (vinyl).

18888 3hydroxybutanová acid and 3hydroxypentanová acid, copolymer

The definition of These copolymers are produced by the controlled fermentation with bacteria

Alcaligenes eutrophus using mixtures of glucose and acid

as one of the sources of carbon. The body must not be used

produced by genetic modification and must come from one

naturally occurring strain of Alcaligenes eutrophus

H16 NCIMB 10442. The stock culture of the organism are kept

in the lyophelised State in ampoules. Sub/working culture

prepared from a stock culture, it is kept in liquid nitrogen and

It is used for preparing seed materials for fermentation. Samples

from the fermenter are daily inspected under a microscope, monitor

any changes in morphology of colonies on different agar

soils at different temperatures. Thermal insulation of the copolymers

the treated bacteria by controlled decomposition of other cell

folders, by washing and drying. These copolymers are normally

offered as a shaped or the melting of přetvarované granules

containing additives such as nucleating agents, plasticisers,

fillers, stabilisers and pigments which comply with the General and

individual specifications.

— Chemical Poly (3Dhydroxybutanoátco3Dhydroxypentanoát)

the name of the

— CAS number 80181-31-3

— Structural

the formula where n/(m + n) is greater than 0 and less than or equal to 0.25

— At least 150 000 Average (by gel permeation chromatography

Molecular method).

the weight of the

Content not less than 98% —

Poly (3Dhydroxybutanoátco3Dhydroxypentanoát), analyzed

After hydrolysis as a mixture of 3Dhydroxybutanové acid and

3Dhydroxypentanové acid.

Description After the isolation of the white to off white powder.

The properties of the

— Identification

exams:

— Solubility soluble in chlorinated hydrocarbons such as chloroform

or dichloromethane but practically insoluble in ethanol,

aliphatic alkanes and water.

— Limitation of the QMA for but2enovou acid (2-butenoic acids) may not

exceed the value of 0.05 mg/6dm2.

— Purity before the default substance (powder copolymer)

include:

— Nitrogen not more than 2 500 mg/kg of plastic

— Zinc not more than 100 mg/kg of plastic

— Copper not more than 5 mg/kg of plastic

— Lead of not more than 2 mg/kg of plastic

— Arsenic not more than 1 mg/kg of plastic

— Chromium not more than 1 mg/kg of plastic

23547 polydimethylsiloxane (Mw > 6 800)

The minimum viscosity of 100x106 m2 * s1 (= 100 centistokesů) at 25 ° c

24903 syrups, hydrolysed starch, hadrogenované

In accordance with the criteria of purity for maltitolový syrup E 965 (ii)

Decree No. 54/2002 Sb.

25385 triallylamin

40 mg/kg Hydrogel at a ratio of 1 kg of food to a maximum of 1, 5gramů

Hydrogel. Use only in hydrogels intended for indirect contact

with the food.

38320 4 (2benzoxazolyl) 4 ' (5metylbenzoxazolyl) stilben

Not more than 0.05% (m/m) (quantity/amount of product)

43480 activated carbon

Only for use in the PET and in the quantity max. 10 mg/kg of the polymer. The same

the purity requirements as for medicinal charcoal (vegetable black) (E 153)

laid down by Decree No 54/2002 Sb.

43680 Chlordifluormethan

CHLORODIFLUOROMETHANE content less than 1 mg/kg of the substance

47210 dibutylthiocíničitá acid, a polymer

— Molecular unit = (C8H18S3Sn2) and (n = 1.5-2)

64990 Maleianhydrid-styrene, copolymer, sodium salt

MW fraction < 1000 make up less than 0.05% by weight of the Mixture 67155 4-(2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene)-4 '-(methyl-2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene) stilbene, 4, 4 '-bis (2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene) stilbene and 4, 4 '-bis (5-methyl-2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene) stilbene Mixture obtained from the manufacturing process in the typical ratio: (58-62%): (23-27%): (13-17) 76721 polydimethylsiloxane (Mw > 6 800)

The minimum viscosity of 100x106 m2 * s1 (= 100 centistokesů) at 25 ° c

1.4-Butanediol 76845 Polyester with kaprolaktonem

MW fraction < 1000 make up less than 0.05% by weight of

76815 Polyester of adipic acid with glycerol or pentaerythritol, esters with

an even number of carbon atoms, fatty acids, C12-C22

MW fraction < 1000 make up less than 0.05% by weight of

77895 alkyl (C16-C18) ethers, poly (ethylene glycol) (n = 2-6)

The composition of the mixture:

1. alkyl (C16-C18) ethers, poly (ethylene glycol) (n = 2-6) (přibližně28%

on a weight basis),

2. fatty alcohols (C16-C18) (approximately 48% w/w),

3. alkyl (C16-C18) ethers of ethylene glycol) (approximately 24%) “

Poly (ethylene glycol) 79600 tridecylether phosphate

Poly (ethylene glycol) (EO = < 11) tridecylether phosphate (mono-and dialkyl ester)

with a max. 10% content of poly (ethylene glycol) (EO = < 11) tridecyletheru.

83595 reaction products of di-tert-butylfosfonitu with bifenylem derived condensation of 2.4-

di-tert-butylfenolu products Friedelovy-crafts reaction of chloride

pbr3 and bifenylu



The composition of the

-4 '-bifenylenbis [0,0-bis (2,4-di-tert-butylfenyl) fosfonit]

(CAS no 38613-77-3) (36 – 46% *)

-4.3 '-bifenylenbis [0,0-bis (2,4-di-tert-butylfenyl) fosfonit]

(CAS no 118421-00-4) (17-23% w/w)

-3,3 '-bifenylenbis [0,0-bis (2,4-di-tert-butylfenyl) fosfonit]

(CAS no 118421-01-5) (1-5% w/w)

-4.0-bifenylenbis [0,0-bis (2,4-di-tert-butylfenyl) fosfonit]

(CAS no 91362-37-7) (17 – 19% w/w)

-tris (2,4-di-tert-butylfenyl) fosfonit

(CAS number 31570-04-4) (9-18% w/w)

4, 4 '-bifenylenbis-{[0,0-bis (2,4-di-tert-butylfenyl) fosfonit] [0.0-

bis (2,4-di-tert-butylfenyl) fosfonit]}

(CAS no 112949-97-0) (5% w/w