251/2003 Coll.
GOVERNMENT REGULATION
of 21 June 1999. July 2003, amending certain regulations of the Government issued
for the implementation of Act No. 22/1997 Coll., on technical requirements for products
and amending and supplementing certain acts, as amended
Change: 154/2004 Sb.
Change: 336/2004 Coll.
Change: 208/2006.
Government orders under section 22 of Act No. 22/1997 Coll., on technical
requirements for products and amending and supplementing certain acts, as amended by
Act No. 71/2000 Coll. and Act No. 204/2002 Coll. (hereinafter the "Act") to
implement section 12 and 13 of the Act:
PART THE FIRST
Change of government regulation, laying down technical requirements for
low-voltage electrical equipment
Article. (I)
Government Regulation No. 168/1997 Coll., laying down technical requirements
on low-voltage electrical equipment, as amended by Decree-Law No.
281/2000 is amended as follows:
1. footnote # 2):
"2) for example, the Protocol to the Europe Agreement establishing an association between the
The Czech Republic on the one hand, and the European communities and their
Member States, of the other part, on conformity assessment and acceptance of
of industrial products (PECA), promulgated under Act No. 56/2001 Coll., m. s. ".
2. In article 3, paragraph 3. 1, the words "shall issue a declaration of conformity according to § 5,
or "shall be deleted.
3. in section 3, paragraph 2, including footnote No. 2a) reads as follows:
"(2) in the case that was initiated proceedings for the imposition of a safeguard measure
by a special Act, ^ 2a) and will ask if the manufacturer or importer,
authorized person (§ 11 para. 1 of the law) shall issue a report on whether it is
electrical system in compliance with the essential requirements.
for example, § 7a 2A), para. 1 (b). a) and b) of Act No. 64/1986 Coll., on Czech
commercial inspection, as amended by Act No. 22/1997 Coll. and Act No. 204/2002
Coll. ".
4. in article 3, the following paragraph 4 is added:
"(4) at the request of the competent authority of the European Community his
the notified body shall issue an opinion stating in what way the electrical
equipment specified in the request does not meet the basic requirements. ".
5. in paragraph 4, the words "the official language of the country in which the product origin"
replaced by the words "the language of one of the Member States of the European Union".
6. paragraph 5 shall be deleted.
7. in section 5a paragraph 2. 1 the words "originating in the Czech Republic or in
the Member States of the European Community and "and the words" not
Declaration of conformity according to § 7, but "shall be deleted.
8. In annex 4, paragraph 6. the words "Declaration of conformity or" shall be deleted.
PART TWO
Change of government regulation, laying down technical requirements for products
in terms of their electromagnetic compatibility
Article II
Government Regulation No. 169/1997 Coll., laying down technical requirements
the products in terms of their electromagnetic compatibility, as amended by
Decree-Law No 282/2000 is amended as follows:
1. In article 1 (1). 2 (a). f), the words "with the origin in the Member
States of the European Community or in the Czech Republic, "and the phrase
the last deleted.
2. footnote # 2):
"2) for example, the Protocol to the Europe Agreement establishing an association between the
The Czech Republic on the one hand, and the European communities and their
Member States, of the other part, on conformity assessment and acceptance of
of industrial products (PECA), promulgated under Act No. 56/2001 Coll., m. s. ".
3. In section 4, paragraph 4. 3, after the words "manufacturer or importer" shall be replaced by ' EC ' and
the words "or certificate of" and the words ", where appropriate, a document issued by
the relevant administrative authority "shall be deleted.
4. In paragraph 5, the words "or documents issued by the administrative authority" shall be deleted and the words
"the official language of the country in which the product origin" shall be replaced by
"the language of one of the Member States of the European Union".
5. Article 7 shall be deleted.
6. In Section 7a of the paragraph. 1 the words "originating in the Czech Republic or in
the Member States of the European Community and "and the words" not
Declaration of conformity according to § 7, but "shall be deleted.
PART THREE
Change of government regulation, laying down technical requirements for the machine
device
Article. (III)
Government Regulation No. 173/1997 Coll., laying down technical requirements
to machinery, as amended by Decree-Law No 15/1999 Coll. and regulation
No. 283/2000 is amended as follows:
1. footnote # 2):
"2) for example, the Protocol to the Europe Agreement establishing an association between the
The Czech Republic on the one hand, and the European communities and their
Member States, of the other part, on conformity assessment and acceptance of
of industrial products (PECA), promulgated under Act No. 56/2001 Coll., m. s. ".
2. In article 1 (1). 6, the words ", was released the Declaration of conformity
or "shall be replaced by" and "and the second sentence shall be deleted.
3. In article 3, paragraph 3. 3, the words "or a declaration of conformity" and the words
"or declaration of conformity" shall be deleted.
4. In article 3, paragraph 3. 4, the words "or declaration of conformity" shall be deleted.
5. In section 3a, the words "§ 5 para. 3 "shall be replaced by" Annex No 6 section 3 ".
6. in paragraph 4, the words "the official language of the country in which the product origin,"
replaced by the words "the language of one of the Member States of the European Union".
7. section 5 is repealed.
8. In section 5a paragraph 2. 1 the words "originating in the Czech Republic, or
in the Member States of the European Community ' shall be deleted.
9. In annex 1, point 1.7.3 (a). (b)), the words "for products having a
origin in the Czech Republic or in the Member States of the European
Community ' shall be deleted.
10. in annex No 3 point 3. the words "for the products originating in the
the Member States of the European Community ' shall be deleted, the word "referred"
is replaced by the word "Mentioned" and after the word "documentation" shall be inserted after the word
"se".
PART FOUR
Change of government regulation, laying down technical requirements for personal
protective equipment
Article IV
Government Regulation No. 173/1997 Coll., laying down technical requirements
on personal protective equipment, as amended by Decree-Law No 284/2000 Coll.
is amended as follows:
1. footnote # 2):
"2) for example, the Protocol to the Europe Agreement establishing an association between the
The Czech Republic on the one hand, and the European communities and their
Member States, of the other part, on conformity assessment and acceptance of
of industrial products (PECA), promulgated under Act No. 56/2001 Coll., m. s. ".
2. In article 2 (2). 3 the words "originating in the Czech Republic or in
the Member States of the European Community ' shall be deleted.
3. in paragraph 4, the words "the official language of the country in which the product origin"
replaced by the words "the language of one of the Member States of the European Union".
4. in § 5 para. 7 (b). and) the words "for products originating in
The Czech Republic, or in the Member States of the European Community, or
the drafting of the Declaration of conformity for other products "and the words" or
Declaration of conformity "shall be deleted.
5. § 5 para. 7 (b). (b)), the words "for the products originating in the United
Republic or in the European Community "shall be replaced by the words" the product ".
6. In article 6 (1). 5, the words "for the products originating in the Member
States of the European Community or in the Czech Republic, "and the words" and for
other products of the type certificate ' shall be deleted.
7. In article 7 (2). 4, the words "the manufacturer or importer must issue a statement
of conformity. In this case, ' shall be deleted.
8. Article 10 shall be deleted.
9. In Article 10a paragraph 1. 1 the words "originating in the Czech Republic or in
the Member States of the European Community and "and the words" in accordance with § 10 "
shall be deleted.
PART FIVE
Change of government regulation, laying down technical requirements for
simple pressure vessels
Article. In
Government Regulation No. 173/1997 Coll., laying down technical requirements
on simple pressure vessels, as amended by Decree-Law No 80/1999 Coll. and
the Government Decree No 285/2000 is amended as follows:
1. footnote # 2):
"2) for example, the Protocol to the Europe Agreement establishing an association between the
The Czech Republic on the one hand, and the European communities and their
Member States, of the other part, on conformity assessment and acceptance of
of industrial products (PECA), promulgated under Act No. 56/2001 Coll., m. s. ".
2. In article 3, paragraph 3. 2 (a). and (2) the words of) "for the vessels that originate in
The Czech Republic or in the community, ", the words" and for other
the vessels will draw up a certificate of documentation ", and the words" or by a certificate
documentation ' shall be deleted.
3. In section 4, paragraph 4. 4, the words "for the products originating in the United
Republic or of the Member States of the European Community, ", the words" and
for products that do not have origins in the Czech Republic or in the European
the community, the certificate of "and the words" or type certificate ' shall be deleted.
4. in § 5 para. 3 (b). (d)), the words "originating in the Member
States of the European Community or in the Czech Republic, ", the words", at the
other containers location of Czech conformity marks according to a special
předpisu4) ", including footnote # 4) and the words" or to the United
the mark of conformity "shall be deleted.
5. In paragraph 8, the words "in the official language of the country in which the product origin"
replaced by the words "in the language of one of the Member States of the European Union".
6. Article 9 shall be deleted.
7. In paragraph 9a(1). 1 the words "originating in the Czech Republic or in
the Member States of the European Community and that "and the words" in accordance with § 9 "
shall be deleted.
8. in annex 2 section 1. (a). g), the words "has been placed Czech brand
the conformity or "shall be deleted.
PART SIX
Change of government regulation, laying down technical requirements for equipment
and protective systems intended for use in potentially explosive atmospheres
Čl.VI
Government Regulation No. 176/1997 Coll., laying down technical requirements
to equipment and protective systems intended for use in environments with
the danger of explosion, as amended by Decree-Law No. 286/2000 Coll. and regulation
No 65/2003, is amended as follows:
1. footnote # 2):
"2) for example, the Protocol to the Europe Agreement establishing an association between the
The Czech Republic on the one hand, and the European communities and their
Member States, of the other part, on conformity assessment and acceptance of
of industrial products (PECA), promulgated under Act No. 56/2001 Coll., m. s. ".
2. In Article 1a(1). 1, after the word "For" is inserted after the word "imported" and the words "
that do not have origins in the Czech Republic or in the Member States
The European Community "shall be deleted.
3. In section 4, paragraph 4. 1 (b). e), the words ", except for the placement of the United
marks of conformity "shall be deleted.
4. section 5 is repealed.
5. In section 5a paragraph 2. 1 the words "originating in the Czech Republic, or
in the Member States of the European Community ' shall be deleted.
6. in paragraph 7, the words "Declaration of conformity or", the word "producer" and the words
"" or his/her authorised representative ' shall be deleted and the words "the official language of the State in
which is the origin of the product, "shall be replaced by the words" the language of one of the
the Member States of the European Union ".
7. in annex 3, section 5. the words "certificate that names for products,
originating in the Czech Republic or in the Member States of the European
the community, "and the words", for other products the certificate type "
shall be deleted.
8. In annex 4, paragraph 1. the words "for the products originating in the United
Republic or of the Member States of the European Community ", and the phrase
the last deleted.
9. in annex 5, point 2. the words "for the products originating in the United
Republic or in the community, "and the last including
footnote 4) are repealed.
10. in annex 6, point 1. the words "for the products originating in the
The Czech Republic, or in the Member States of the European Community ", and
the last sentence shall be deleted.
11. In annex 7, point 1. the words "for the products originating in the
The Czech Republic, or in the Member States of the European Community ", and
the last sentence shall be deleted.
12. in annex 8, point 1. the words "for the products originating in the
The Czech Republic, or in the Member States of the European Community ", and
the last sentence shall be deleted.
13. in annex No 9, point 1. the words "for the products originating in the
The Czech Republic, or in the Member States of the European Community ", and
the last sentence shall be deleted.
PART SEVEN
Change of government regulation, laying down technical requirements for
appliances burning gaseous fuels
Article. (VII)
Government Regulation No. 173/1997 Coll., laying down technical requirements
for appliances burning gaseous fuels, as amended by Decree-Law No. 287/2000 Coll.
is amended as follows:
1. footnote # 2):
"2) for example, the Protocol to the Europe Agreement establishing an association between the
The Czech Republic on the one hand, and the European communities and their
Member States, of the other part, on conformity assessment and acceptance of
of industrial products (PECA), promulgated under Act No. 56/2001 Coll., m. s. ".
2. In article 3, paragraph 3. 3 the words "originating in the Czech Republic or in
the Member States of the European Community ' shall be deleted.
3. In article 3, paragraph 4, including footnote 3) is repealed.
Paragraphs 5 to 10 shall be renumbered as paragraphs 4 to 9.
4. In article 3, paragraph 3. 4, the words "and the Czech conformity marks, and where it comes in
consideration of issue of Declaration of conformity "shall be deleted.
5. In section 3, paragraph 3. 5, the words "or a declaration of conformity," and the words
"or declaration of conformity" shall be deleted.
6. In section 3, paragraph 3. 6, the words "or declaration of conformity" shall be deleted.
7. in section 3, paragraph 3. 8, the words "the official language of the State in which the product has
the origin of "shall be replaced by the words" the language of one of the Member States of the European
the Union ".
8. section 4 is repealed.
9. in section 4A(1). 1 the words "originating in the Czech Republic or in
the Member States of the European Community and "and the words" in accordance with § 4 "
shall be deleted.
10. In annex 2, point 1.4, the words "originating in the United
Republic or of the Member States of the European Community ", the words" and for
other appliances certificate of ", the words" or a "certificate of type and
the words "or type certificate ' shall be deleted.
11. In annex 2, point 2.1 the last sentence is deleted.
12. In annex 2, point 3.1 the last sentence shall be deleted.
13. in annex 2 section 4.1 is the last sentence is deleted.
14. in annex 2, point 5.2, the last sentence shall be deleted.
15. in annex 2, point 6.1, the last sentence shall be deleted.
16. In annex 2, point 6.2, the last sentence shall be deleted.
PART EIGHT
Change of government regulation, laying down technical requirements for lifts
Article. (VIII)
Government Regulation No. 14/1999 Coll., laying down technical requirements for
elevators, as amended by Decree-Law No. 227/1999 Coll. and Decree-Law No.
288/2000 is amended as follows:
1. footnote # 2):
"2) for example, the Protocol to the Europe Agreement establishing an association between the
The Czech Republic on the one hand, and the European communities and their
Member States, of the other part, on conformity assessment and acceptance of
of industrial products (PECA), promulgated under Act No. 56/2001 Coll., m. s. ".
2. In article 2 (2). 3, the words "in cases of lifts and safety
the components originating in the Czech Republic or in the Member States
The European Community "shall be deleted.
3. In section 4, paragraph 4. 4, the words "originating in the Czech Republic and in the
The European Community ' shall be deleted.
4. in § 5 para. 2 the words "the official language of the country in which the product
the origin of "shall be replaced by the words" the language of one of the Member States of the European
the Union ".
5. section 6, including footnote 4) is repealed.
6. In section 6a of paragraph 1. 1 the words "originating in the Czech Republic, or
in the Member States of the European Community ' shall be deleted.
7. in annex 5, part I, para. 4 the words ' certificate that names the
products originating in the Czech Republic or in the Member States
The European Community "and the words", for other products the certificate of
type-examination "shall be deleted.
8. In annex 5, part II, paragraph 1. 4 the words ' certificate that names the
products originating in the Czech Republic or in the Member States
The European Community "and the words", for other products the certificate of
type-examination "shall be deleted.
9. in annex 6, point 1. the words "having its origin in the Czech Republic
or in the Member States of the European Community "and the words", at the
other lifts the Czech brand conformity "shall be deleted.
10. in annex 6, point 5. the words "to the Czech brand conformity" shall be replaced by
the words "to the" CE "marking".
11. in annex 8, point 1. the words "resulting in the Czech Republic
or in the Member States of the European Community "and the words", at the
other safety components Czech mark of conformity "shall be deleted.
12. in annex No 9, point 1. the words "resulting in the Czech Republic
or in the Member States of the European Community "and the words", at the
other safety components Czech mark of conformity "shall be deleted.
13. in annex No 10 point 1. the words "originating in the Czech Republic
or in the Member States of the European Community "and the words", at the
other lifts the Czech brand conformity "shall be deleted.
14. in annex # 11 point 1. the words "resulting in the Czech Republic
or in the Member States of the European Community "and the words", at the
other safety components Czech mark of conformity "shall be deleted.
15. in annex No. 12 point 1. the words "resulting in the Czech Republic
or in the Member States of the European Community "and the words", at the
other lifts the Czech brand conformity "shall be deleted.
16. in annex No 1 point 1. the words "resulting in the Czech Republic
or in the Member States of the European Community "and the words", at the
other lifts the Czech brand conformity "shall be deleted.
17. in annex 2 section 1. the words "resulting in the Czech Republic
or in the Member States of the European Community "and the words", at the
other lifts the Czech brand conformity "shall be deleted.
PART NINE
Change of government regulation, laying down technical requirements for the effectiveness of
hot-water boilers firing liquid or gaseous fuels
Article. (IX)
Government Decree No. 180/1999 Coll., laying down technical requirements
on the efficiency of boilers firing liquid or gaseous fuels,
as amended by Decree-Law No 289/2000 is amended as follows:
1. footnote # 2):
"2) for example, the Protocol to the Europe Agreement establishing an association between the
The Czech Republic on the one hand, and the European communities and their
Member States, of the other part, on conformity assessment and acceptance of
of industrial products (PECA), promulgated under Act No. 56/2001 Coll., m. s. ".
2. In section 4, paragraph 4. 2, the last sentence shall be deleted.
3. In section 4A(1). 1 the words "whose particulars are set out in section 7 of the"
shall be replaced by "referred to in part I, II or III of annex 4 to this
Regulation depending on the procedure for assessment of conformity and affixes
the CE marking ".
4. In section 4A(1). 2 the words "originating in the Czech Republic or in
the Member States of the European Community "and the words" instead of
a declaration of conformity in accordance with article 7 "be deleted.
5. In section 4A(1). 4, the words "or a declaration of conformity" and the words
"or declaration of conformity" shall be deleted.
6. in § 5 para. 1, the words "or a declaration of conformity with the necessities
laid down in section 7 "shall be deleted and the words" official language of the State in which the
product origin "shall be replaced by the words" the language of one of the Member States
The European Union ".
7. section 7 is repealed.
8. in annex No 4, part I, point 1. the last sentence is deleted.
9. in annex No 4, part II, point 1. the last sentence is deleted.
10. in annex No 4, part III, section 1. the last sentence is deleted.
PART TEN
Change of government regulation, laying down technical requirements for pressure
device
Article. X
Regulation of the Government No. 182/1999 Coll., laying down technical requirements
for pressure equipment, as amended by Government Decree No. 290/2000 Coll., is amended
as follows:
1. Footnote 1a) is inserted:
"for example, 1a) the Protocol to the Europe Agreement establishing an association between the
The Czech Republic on the one hand, and the European communities and their
Member States, of the other part, on conformity assessment and acceptance of
of industrial products (PECA), promulgated under Act No. 56/2001 Coll., m. s. ".
2. In section 4, paragraph 4. 1 the words "material certificate or, in the cases referred to in
§ 7a "and the words" with material certificate or, in the cases referred to in § 7a "
shall be deleted.
3. In section 4, paragraph 4. 3 the words "material certificate or, in the cases referred to in
§ 7a "are deleted.
4. In article 5, paragraph 6, including footnote 7) is repealed.
Paragraphs 7 to 9 shall be renumbered 6 to 8.
5. Article 7 shall be deleted.
6. Section 7a is inserted:
"§ 7a
For pressure equipment and assemblies which comply with the requirements provided for in this
Regulation, or the manufacturer's authorised representative placed on the product
the CE marking and draws up the EC declaration of conformity in accordance with annex 6 to the
This regulation, with the exception of the cases referred to in § 8. ".
7. In annex 1, point 3.3.1., the words "the Czech mark of conformity according to § 5
paragraph. 6 designation or "shall be deleted.
8. In annex 1, point 3.3.2 of the words "Czech brand of conformity or in
cases under section 7a of the designation ' shall be deleted.
9. In annex 1, point 3.3.2 (b). and marking) the words "Czech brand
the conformity or in cases under section 7a "are deleted.
10. In annex 1, point 4.2. (a). (b)), subsection 2. the words "material
certificate referred to in paragraph 4 or, in the case under section 7A(1). 1 "shall be deleted.
11. In annex 3, paragraph 3. 1 point 1. the words "in cases under section 7a"
shall be deleted.
12. In annex 3, paragraph 3. 1 point 3. After the word "copy" shall be replaced
"EC".
13. in annex No 3 (2). 3, point 4.1. (a). (b)), the words "material
certificate, or in the case referred to in § 7a "are deleted.
14. in annex No 3 (2). 3, point 5. the words "manufacturers, or
authorised representative ", the words" or importers-examination certificate
the type of "and the words" the type examination certificate, or in the case referred to in §
7A "are deleted.
15. In annex 3 paragraph. 3 point 6. the words "examination certificate
type, or in the case referred to in § 7a "are deleted.
16. in annex No 3 (2). 4, paragraph 2. (a). (b)), the words "of the examination
design, or in the case referred to in § 7a of ' shall be deleted.
17. in annex No 3 (2). 4, paragraph 4.1. (a). and) the words "in the case referred to in
§ 7a "are deleted.
18. in annex No 3 (2). 4, paragraph 5. the words "in the case referred to in § 7a"
shall be deleted.
19. In annex 3 paragraph. 4, paragraph 6. the words "examination certificate
design or in the case referred to in § 7a "are deleted.
20. In annex 3 paragraph. 5 point 2. the words "in cases under section 7a" and
the words "in the type-examination certificate or, in the case referred to in § 7a"
shall be deleted.
21. in annex No 3 (2). 5 point 3. After the word "manufacturer" shall be replaced
"or the importer." The words "or the importer keeps a copy of the Declaration of conformity"
shall be deleted.
22. in annex No 3 (2). 6 point 1. the words "examination certificate
the type or design examination certificate, or in the case referred to in §
7A "and the words" in cases under section 7a "are deleted.
23. In annex 3 paragraph. 6 section 3.1. (a). (c)) the words "a copy of the
type-examination certificate or, in the case referred to in § 7a "and the words
"the design-examination certificate or, in the case referred to in § 7a" are deleted.
24. In annex 3 paragraph. 6 point 3.2. the words "type examination, or
in the case referred to in § 7a certificate "and the words" for examination of the design or in the
the case under section 7a of the certificate ' shall be deleted.
25. In annex 3 paragraph. 7 point 1. the words "in cases under section 7a"
shall be deleted.
26. In annex 3 paragraph. 8 point 1. the words "type examination, or in
the case under section 7a of the certificate "and the words" in cases under section 7a "
shall be deleted.
27. In annex 3 paragraph. 8 point 3.1. (a). (c)), the words "certificate of
type-examination, or in the case referred to in § 7a "are deleted.
28. in annex 3 paragraph. 9 point 1. the words "in cases under section 7a"
shall be deleted.
29. in annex 3, paragraph 3. 10 point 1. (a). and) the words "certificate of
type-examination, or in the case referred to in § 7a "are deleted.
30. In annex 3 paragraph. 10 point 1. (a). (b)), the words "certificate of
type-examination, or in the case referred to in § 7a "are deleted.
31. in annex 3 paragraph. 10 point 2. (a). and) the words "certificate of
type-examination, or in the case referred to in § 7a "are deleted.
32. In annex 3 paragraph. 10 point 2. (a). (b)), the words "of the examination
design, or in the case referred to in § 7a certificate ' shall be deleted.
33. In annex 3 paragraph. 10 point 2. the words "in cases under section 7a"
shall be deleted.
34. In annex 3 paragraph. 10 point 3. After the word "copy" shall be replaced
"EC".
35. In annex 3 paragraph. 10 point 4.3. the words "certificates of conformity
or in the case referred to in § 7a "are deleted.
36. In annex 3 paragraph. 11 point 1. the words "in cases under section 7a"
shall be deleted.
37. In annex 3 paragraph. 11 section 4. (a). (b)), the words "material
certificate or, in the case referred to in § 7a "are deleted.
38. In annex 3 paragraph. 12 point 1. the words "in cases under section 7a"
shall be deleted.
39. In annex 3 paragraph. 13 point 1. (a). (c)), the words "certificate of
examination of the design, or in the case referred to in § 7a "are deleted.
40. In annex 3 paragraph. 13 point 1. (a). (d)), the words "certificate of
examination of the design or in the case referred to in § 7a "are deleted.
41. In annex 3 paragraph. 13 point 1. (a). e), the words "production
the design-examination certificate or, in the case referred to in § 7a "are deleted.
PART ELEVEN
Change of government regulation, laying down technical requirements for construction
products called CE
Article. XI
Government Regulation No. 190/2002 Coll., laying down technical requirements
for construction products called CE, is amended as follows:
1. in article 1, paragraph 3 is deleted.
Paragraph 4 becomes paragraph 3.
2. In article 1 (1). 3 the words "1-3" shall be replaced by "1 and 2, with
except as provided in section 8 ".
3. In § 8 para. 1 the words "on the transitional period, can be" shall be replaced by
"that allows you not to apply for a transitional period, during this time".
4. In article 8, paragraph 1, the following paragraph 2 is added:
"(2) for products intended to be marketed exclusively in the Czech Republic can be
follow special legal předpisu3) instead of this regulation,
in the event that technical standard referred to in paragraph 1, or a European technical
approval does not contain transitional provisions ".
The former paragraph 2 becomes paragraph 3.
5. in article 9, paragraph 2 shall be deleted and shall be deleted at the same time, paragraph
1.
PART TWELVE
Change of government regulation, laying down technical requirements for radio
and telecommunications terminal equipment
Article. (XII)
Government Regulation No. 426/2000 Coll., as amended by Decree-Law no 483/2002
Coll., laying down technical requirements for radio and telecommunications
terminal equipment shall be amended as follows:
1. in article 1, the following new section 1a, which including the footnotes # 3a) and
3B):
' section 1a
This regulation is in accordance with the law of the European communities ^ 3a) and with
International Treaty ^ 3b) provides technical requirements for radio and
telecommunications terminal equipment.
3A) directive of the European Parliament and of the Council No. 1999/5/EC on radio and
telecommunications terminal equipment and the mutual recognition of their
of conformity.
3B) for example, the Protocol to the Europe Agreement establishing an association between the
The Czech Republic on the one hand, and the European communities and their
Member States, of the other part, on conformity assessment and acceptance of
of industrial products (PECA), promulgated under Act No. 56/2001 Coll., m. s. ".
2. In article 3, paragraph 4, including footnote No. 9) is repealed.
Paragraphs 5 to 8 shall become paragraphs 4 to 7.
3. In article 3, paragraph 3. 7, the words "and subject to the appropriate international
the Treaty "including footnote # 10b) and the words" instead of the procedure
in accordance with paragraph 4 "are deleted. After the words "Declaration of conformity"
the words "basic requirements".
4. Article 9 shall be deleted.
5. in annex 2 section 1. the words "connects to every product in the Czech
the mark of conformity "shall be deleted. After the words "Declaration of conformity" shall be inserted after
"basic requirements".
PART THIRTEEN
cancelled
Article. XIII
cancelled
PART OF THE FOURTEENTH
cancelled
Article. XIV
cancelled
PART FIFTEEN
cancelled
Article. XV
cancelled
PART OF THE SIXTEENTH
TRANSITIONAL PROVISIONS
Article. XVI
(1) in the case of products which are not intended for placing on the market of the European
community and which are subject to Government Regulation referred to
and in the article). XI to XIV, you can follow the existing legislation
the entry of the Treaty of accession of the Czech Republic to the European Union in
entry into force,
(b)) in the article. I to X, you can follow the existing legislation to
the publication of the agreement amending the Protocol to the Europe agreement
establishing an association between the European communities and their
Member States, of the one part, and the Czech Republic, on the other
conformity assessment and acceptance of industrial products, in the collection of
international treaties.
(2) in cases where the conformity assessment procedures involved in the authorized
a person can be followed under this regulation to the date of publication
Agreement amending the Protocol to the Europe Agreement establishing an
Association between the European communities and their Member States, of the
one part, and the Czech Republic, of the other part, on conformity assessment and
acceptance of industrial products, in the collection of international treaties.
PART SEVENTEEN:
The EFFECTIVENESS of the
Article. XVII
(1) this Regulation shall enter into force on the date of its publication, with the exception of
the provisions of article. XI to XIV, which shall take effect on the date of publication of the
Decision of the Association Council of annexes to a protocol connection to the European
agreement on conformity assessment and acceptance of industrial products in the collection
international treaties.
(2) the date of entry of the Treaty of accession of the Czech Republic to the European Union in
the validity of the article are void. I to X and article. XVI.
Prime Minister:
PhDr. In r.
Minister of industry and trade:
Ing. Urban v r.
