Advanced Search

Change Search. About The Safe Preparation And Refining Of Minerals

Original Language Title: změna vyhl. o bezpečnosti práce při úpravě a zušlechťování nerostů

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.
143/2004 Sb.



DECREE



of 19 December 2003. March 2004,



amending Decree No 51/1989 Coll., on safety and health

at work and the safety of operations when editing and refining of minerals, in

as amended



The Czech mining Office lays down pursuant to § 5 para. 3 and § 6 para. 6 (a). and)

Act No. 61/1988 Coll. on mining activities, explosives and the State

Mining Administration, as amended by Act No. 542/1991 Coll.:



Article. (I)



Decree No 51/1989 Coll., on safety and health at work and the

the safety of operations when editing and refining of minerals, as amended by

Decree No. 340/1992 Coll., Act No. 9/1994 Coll., Decree No. 237/1998

Coll. and Decree No. 434/2000 is amended as follows:



1. In article 1 (1). 1, after the word "establishes" the words "in accordance with the

the law of the European communities ^ 1a) ".



Footnote 1a) is inserted:



"1a) Council Directive 92/104/EEC on minimum requirements for improving the

safety and health protection of workers in surface and underground

the mining industry ".



2. in paragraph 2 of the letter a) and b) are added:



and "the burden of excess weight) subject, of which the weight is greater than the

3000 kg,



(b)) the burden of excessive dimensions subject, transport or

handling spaces cannot be honored on the route laid down by this

by Decree, ".



3. In article 37, paragraph 2 reads as follows:



"(2) automatically or remotely controlled equipment shall be equipped with (i) manual

control. Manual control with automatic or remote control

disables the function. In the place of a remotely controlled device will ensure

block rendering side reset the device to run. If he can

by changing the control settings rise to the status of endangering the safety of work and

operation, prevents it by appropriate means, which are usually

access code or lockable control. ".



4. § 54 para. 4 (f)) repealed.



Letter g) is renumbered as paragraph (f)).



5. In article 55, paragraph 1, including footnote No. 26a) reads as follows:



"(1) the Organization shall determine the procedure for the installation, operation and maintenance of electrical

devices in addition to the person who has the qualification requirements in accordance with

special legal regulation ^ organizations 26a) regulating or

briketujících coal higher education acquired in the master's

study programme in the field of technical sciences and technologies with a focus

the electrical engineering and other organizations at least complete medium

professional education of Electrotechnical direction.



26A) § 9 para. 6 of Decree No. 75/2002 Coll. on road safety

electrical technical equipment used in mining activities and

activities carried out using mining techniques. ".



6. section 97, including the title reads as follows:



"§ 97



Transport of loads excessive weight or oversized loads



(1) the burden of excessive weight or burden of excessive dimensions

manually or skid and manipulation may work under the processed

operational documentation approved by the senior executive staff with only

at least two years of experience in the transportation. The said means of transport may be

carry out only in the presence of technical supervision.



(2) mechanical transport burden of excessive weight or burden of excessive

the dimensions specified in the transport order approved by a corporate officer may

exercise only workers with at least two years of experience in the transportation.



(3) prior to the handling and transport of the burden of excessive weight or burden

oversized employee view must specified a device designed to

handling and transport of the burden of excessive weight or burden of excessive

dimensions, whether it conforms to the operational documentation and is not damaged. The result of the

inspection records.



(4) prior to the transport of the burden of excessive weight or burden of excessive

the dimensions specified by the worker is obliged to perform the control direction

traffic routes. The result recorded.



(5) the documentation referred to in paragraph 1 and traffic regulations referred to in paragraph

2 must contain the conclusions of the assessment of the burden of excessive

the burden of excessive weight or size and elements of the infrastructure,

particularly in terms of load carrying capacity of the substrate used to transport as the transport

paths, bow traffic routes, the weights and dimensions of the load, stability

the burden of having regard to the position of its centre of gravity during transport, the assessment

the necessary bed area of means of transport and fastening of the load,

and to the extent, in order to avoid unwanted movement of the load,

its tilting or tipping over.



(6) where it is carried out by transport and manipulation with the burden of excessive

weight or burden of excessive dimensions, must not be carried on any

other activity. ".



Article II



This Decree shall enter into force on 1 January 2000. July 2004.



President:



Prof. JUDr. Ing. Makarius, CSc. v. r.