The Details Of The Marking And Colouring Of Selected Mineral Oils

Original Language Title: podrobnosti značkování a barvení vybraných minerálních olejů

Read the untranslated law here: https://portal.gov.cz/app/zakony/download?idBiblio=64680&nr=61~2F2007~20Sb.&ft=txt

61/2007 Sb.



DECREE



of 21 June 1999. in March 2007,



laying down the details of the marking and colouring of the selected

mineral oils and tagging of certain other mineral oils



Change: 211/2009 Sb.



Change: 169/2015 Sb.



The Ministry of industry and trade shall be determined according to § 139 paragraph 2. 3 of Act No.

353/2003 SB., on the Excise Tax Act, as amended by Act No. 217/2005 Coll. and

law no 575/2006 Coll. (hereinafter the "Act") to implement section 134a para. 2,

§ 134 b of paragraph 2. 3, § 134e para. 3, para. 6 (a). (d)) and paragraph 2. 7, § 134l

paragraph. 2, § 134 m para. 3 and § 134p para. 3, para. 6 (a). (d)) and paragraph 2. 7

the law:



§ 1



This Decree was notified in accordance with the directive of the European Parliament

and Directive 98/34/EC of 22 December 2004. June 1998 on the procedure for the provision of information

in the field of technical standards and regulations and of rules on information

the company, as amended by Directive 98/34/EC.



§ 2



The kind of marker and dye



(1) The marking and colouring of mineral oils as referred to in § 134 b of paragraph 1.

1 of the liquid mixture is used to markup a substance, the chemical name

added N-ethyl-N-[2-(1-isobutoxy-ethoxy) ethyl]-4-(fenylazo) aniline with

identification colour SOLVENT YELLOW 124, and in particular

red dye Solvent Red 19. For the tagging is used at least 6

mg of marker per litre of mineral oil and such minimum

the amount of dye, which is colored mineral oil Red

and will be qualitatively detectable.



(2) The marking of mineral oils as referred to in § 134 m para. 1 (b).

b), c), (d)) and e) of the Act is used for marking a substance whose chemical

the name sounds N-ethyl-N-[2-(1-isobutoxy-ethoxy) ethyl]-4-(fenylazo) aniline

with the identification colour SOLVENT YELLOW 124. For tagging

is it at least 6 mg of marker per litre of mineral oil.



Method of sampling



§ 3



(1) a sample of the mineral oil referred to in § 2 (hereinafter referred to as "pattern") are

shall be entitled to remove the Customs authorities and the Customs Directorate, regional financial

authorities or the Czech trade inspection ^ 1) (hereinafter referred to as "the competent State

the body "). To sample the competent national authority shall invite the person who is

mineral oil or with the machine for which it was designed, in the mineral oil

had the time or manipulated (hereinafter referred to as "controlled

person "); If this is not possible, you may invite any adult person

eligible legal capacity and on the control of NCB.



(2) when sampling by the competent national authority shall be governed by the procedure referred to



and) in annex No. 1 to this notice, if the sample is drawn from a container,

that is, in conjunction with the engine,



(b)) in the relevant Czech technical standard ^ 2) for all other cases.



(3) the competent national authority shall always immediately prior to collection

sample of flushing out the sampler in the presence of the persons referred to in

paragraph 1. Flushing is done by the procedure referred to in annex 1 to this

or in the relevant decree of the Czech technical standard ^ 2).



§ 4



(1) if the competent national authority for mineral oil that is not

allowed to tag and coloured according to § 134 b of paragraph 2. 2 of the Act, discoloration

the appropriate mixture of marker and coloring according to § 2 (2). 1, separates

from a sample taken under section 3 (1). 2 part for analysis

the accredited person for inspection and storage part for

a controlled person. In the event that a controlled person does not request a sample

for your own personal use, and this fact confirms the subscription log

of the sample, only the appropriate pattern for an accredited person and

the control pattern for the Save.



(2) unless the competent national authority when checking for mineral

oil, which is not allowed to tag and coloured according to § 134 b of paragraph 2. 2

the law, the corresponding colour blends marker and coloring according to §

2 (2). 1, perform a test kit for performing the checks in

the terrain, the presence of a mixture of an eligible key marker and

colouring matter in the sample. The check consists in mixing a sample of mineral oil

with reaction reagent. If after shaking and padding the bottom layer

colour matching and marker dyes mixtures according to § 2 (2).

1, or if there is no padding the bottom layer, the competent State

authority shall proceed in accordance with paragraph 1.



(3) unless the competent national authority when checking for mineral

oil, which must be značkován and colours according to § 134 b of paragraph 2. 1 of the Act,

colour matching and marker dyes mixtures according to § 2 (2).

1, separated from a sample taken under section 3 (1). 2 part for the implementation

analysis of the accredited person and part of the control store.



(4) if the competent national authority during the inspection of mineral oil,

which must be značkován and colours according to § 134 b of paragraph 2. 1 of the Act, discoloration

the appropriate mixture of marker and coloring according to § 2 (2). 1,

performs a check test kit to carry out checks in the field,

to identify the presence of a mixture of a competent marker and colouring in

sample. The check consists in mixing the sample with mineral oil field reaction

reagent. Where after shaking and padding the bottom layer

colour matching and marker dyes mixtures according to § 2 (2).

1, or if there is no padding the bottom layer, the competent State

separated from the authority of the samples taken in accordance with § 3 (1). 2 part for the implementation

analysis of the accredited person and part of the control store.



(5) when checking the mineral oils referred to in § 134 m para. 1 (b). (b)),

(c)), d) and (e)) of the Act shall proceed mutatis mutandis, by the competent national authority

paragraphs 1 to 4.



§ 5



(1) the minimum volume of sample taken is 210 cm3, in the case that

controlled person does not request a sample for your own use, it is the minimum

the volume of the sample taken 140 cm3. For the accredited person

separated at least 70 cm3, for control also saved 70 cm3 and for

the controlled person at least 70 cm3.



(2) the competent national authority shall ensure that, in order to avoid destruction, confusion,

modify or abuse of the sample taken for analysis

the accredited person and sample taken for control

saving. Sample stored in the sample book which marks, seal

and repel light.



§ 6



(1) every time you sample the competent national authority shall draw up a protocol.



(2) the Protocol provides:



log sequence number) registered by the competent national authority,



(b)) the designation of competent national authority which subscription is carried out



(c)) identification of controlled person, or other adult,

invited to sample,



d) date, time and place of implementation of sampling,



(e) the name and type) the tank or vessel from which the sample was taken;

If the sample is taken from the vessel, which is in conjunction with the vehicle

license plates of the vehicle, if the vehicle is a brand of

the latter, a method of sampling,



(f) confirmation of persons controlled) to not require the control sample referred to in

section 4, paragraph 4. 1,



g) the result of the checks carried out in accordance with paragraph 4,



h) number of the seals, designation of the sample taken and an indication of its quantity,



I) first and last names of people interested in sampling and their

signatures,



j) name and function of the person who performs the inspection, and its

signature.



(3) the Protocol shall be drawn up in two copies. Both copies must be

signed by all interested parties. A copy of the Protocol, the

the competent national authority shall keep to the Foundation in the register of collected

formulas. The second copy of the Protocol receives the controlled person. Pattern

the Protocol is given in annex 2 to this Decree.



(4) if the sample is delivered to the person shall be accredited by the competent

the competent authority of the requesting State accompanying worksheet performing analysis

the accredited person, that will contain the identification

the information relating to the sample taken; the cover sheet must contain

data on the controlled person and of the place and the date of the execution of the subscription.



§ 7



(1) the competent national authority shall deliver a sample after sampling the

accredited person at least two persons without undue delay.



(2) the competent person shall confirm the receipt of the sample accredited. In the case that

When the takeover is noticeable damage to the packaging or are obvious, other

the irregularity, he shall indicate this fact to the Inspectorate in confirming

the takeover. The findings confirm the signing marked a person who sample

accepts, so persons who served in the sample.



(3) in the event that the damage to the packaging or other irregularities are of such

the kind that could have the effect of calling into question the credibility of the analysis,

the appropriate accredited person in writing immediately inform

the competent national authority and the analysis of the sample does not do.



(4) the competent national authority, which has removed or taken over by pattern for

the control store, stores it and kept for a period of three years from the date of subscription.

A control sample is kept in a tightly closed container of dark glass

or coated metal, in order to avoid the approach lights. The vessel is

holds the sample up to a maximum of 90% of its capacity, it is then closed and

stored in the dark at a constant temperature of between 5 to 10th. (C).



§ 8



The method of keeping records



(1) natural persons and legal persons that manufacture, process,


transport, storing, purchase or otherwise acquire, sell or

consume the mineral oil listed in § 2 shall maintain a register and

be carried out weekly payments on the types, quantity and quality produced,

processed, imported, stored, reproduced, and published

mineral oils, including self-employed individuals and ^ 3)

the persons who supplied them with mineral oils, as well as the

legal entities and natural persons, which mineral oils shall be issued.



(2) the natural persons and legal entities that handle with mineral oil

referred to in section 2 shall keep a register of issued and received acknowledgments of

quality mineral oils.



(3) the manufacturer of the mixture of dye or marker and marker

shall maintain a register and shall carry out the weekly balance of the quantity, characteristics, and

the composition of the produced mixture marker and dye or marker

substances, on natural persons and legal entities, which blend

marker and dye or marker substance supplied. Users

a mixture of marker and dye or marking level shall keep a register of

the quantity, characteristics and composition, taken a mixture of marker and

dye or marker, about its use and about individuals

or legal persons, that they blend marker and dye

or marking.



(4) the register kept under paragraphs 1 and 3 shall be indicated on the legal

persons and natural persons the following information:



and business trade name) or the name, registered office and identification number

legal persons, if assigned; name, or first and last name,

place of residence, place of business and identification number of the natural person if the

allocated,



(b)) for natural persons, the name, or the name and surname and place of residence.



(5) the documents of the register shall be kept for the period and in the manner as documents

accounting ^ 4).



§ 9



(1) the list of mineral oils must not be tag your tracks and dyed (§

134 b of paragraph 2. 3 of the Act), for the reason that the tagging and coloring might be on

the failure to use them, is given in annex 3 to this notice.



(2) the list of mineral oils must not be tag your tracks (§ 134 m

paragraph. 3 of the Act), for the reason that the tagging may have been the fault of their

use, is set out in annex 4 to this notice.



§ 9a



(1) the list of technologies for which tagging and mineral coloring

oils on the failure of their use (section 11 of the Act 134e paragraph) is given in

Annex No. 5 to this Decree.



(2) the list of technologies for which tagging of mineral oils on

the failure to use them (paragraph 134p paragraph 11 of the law), is given in annex No.

6 to this Ordinance.



§ 10



Transitional provision



The competent national authorities shall, in dealing with a sample taken

before the date of entry into force of this order in accordance with this Ordinance.



§ 11



The effectiveness of the



This Decree shall take effect on the date of its publication.



Minister:



Ing. Roman v. r.



Č. 1



Sampling from the container associated with the engine



1. Sampling of mineral oil from the vessel, which is in conjunction with the

the engine, the competent national authority uses the portable sampling (sampling)

device.



2. Rinsing sampler before sampling (section 3 paragraph 3)

the competent national authority of the mineral oil from the controlled tanks

in a container intended for this. To rinse it approximately 100 cm3

mineral oil.



3. When sampling by the competent national authority shall proceed

the enclosed operating manual of the sampler.



4. Before and after the reception equipment is necessary to wipe his

the parts that come into contact with mineral oil in the tank.



Č. 2



PATTERN



Protocol on sampling



.............. ................

the State authority the protocol number



THE PROTOCOL FOR THE SAMPLING AND

INSPECTION MADE BY THE COMPETENT PUBLIC AUTHORITY

pursuant to Act No. 356/2003 SB., as amended by

amended, and pursuant to Decree No. 61/2007 Sb.



The date and time of sample collection............................



Sampling site..................................



Identification details of controlled person

.....................................................



.....................................................



(business name or the name, registered office and identification

the number of the legal person, the name or names and

last name, residence, place of business and the identification

the number of natural persons has been allocated)



______________________________________________________



Name and type of the tank or vessel from which the sample was

removed; If the sample is taken from the vessel, which is in the

connection to the vehicle, the vehicle registration plate,

If the vehicle is fitted with such a mark; way

sampling



.....................................................



.....................................................



The result of the checks carried out pursuant to § 4



.....................................................



Number of the seal, the designation of the sample taken and an indication of its quantity



............ ................. ..........



............ ................. ..........



............ ................. ..........



Name, last name and signatures of the persons participating in the sampling



............ ................. ..........



............ ................. ..........



............ ................. ..........



Name, last name, capacity and signature of the person who performs the inspection



............ ................. ..........



............ ................. ..........



............ ................. ..........



Confirmation of the controlled person about to not require control



.................. .....................

Name, surname, Signature

a controlled person



Č. 3



List of mineral oils, which may not be tag your tracks and stained from the

the reason that the tagging and coloring might be the fault of their use



------------------------------------------------------------------------------------------------------------

Name and specification of the product nomenclature code ^ 1)

------------------------------------------------------------------------------------------------------------



1. medium oil for other purposes-kerosene (kerosen) other ex 2710 19 25 ^ 2)



Specifications: oils



1.1 for the production of solid and liquid firelighters, classic oils and kerosene lighting,

1.2 for the manufacture of products for polishing and cleaning,

1.3. for the production of foil PVC and metal foils,

1.4 for the manufacture of varnishes, paints, solvents and fillers,

1.5 for the production of detergents for the printing industry,

1.6 for the manufacture of detergents, hand gels

1.7 for the CB production used in the manufacture of paper, průpisového

1.8 for the intrinsic and electro-erosion machining of metals

1.9 in unchanged form for cleaning.



------------------------------------------------------------------------------------------------------------



2. Medium oils other ex 2710 19 29 ^ 2)



Specifications: oils



2.1. for the production of solid and liquid firelighters, classic oils and kerosene lighting,

2.2 for the manufacture of products for polishing and cleaning,

2.3 for the production of foil PVC and metal foils,

2.4 for the manufacture of varnishes, paints, solvents and fillers,

2.5 for the production of detergents for the printing industry,

2.6 for the manufacture of detergents, hand gels

2.7 for the CB production used in the manufacture of paper, průpisového

2.8 for intrinsic and electro-erosion machining of metals

2.9 in unchanged form for cleaning.



------------------------------------------------------------------------------------------------------------



3. Heavy gas oils, ex 2710 19 41 ^ 2)

ex ^ 2) 2710 19 45

ex ^ 2) 2710 19 49



Specifications: oils



3.1 for the production of solid and liquid firelighters, classic oils and kerosene for lighting,

3.2 for the manufacture of products for polishing and cleaning,

3.3 for the production of printing inks,

3.4 for the manufacture of pharmaceutical, cosmetic and animal health products,

3.5 for the production of paints and thinners,

3.6 for forming and machining,

3.7 for hydraulic and circulating systems

3.8 for formwork, concrete structures,

3.9 for technical purposes,

3.10 as the transformer and electrical insulating oils

3.11 as the shock oil

3.12 as a separation of the liquid to the release of the forms,

3.13 as the calibration fluid

3.14 as a test and the test liquid for diesel engines.

------------------------------------------------------------------------------------------------------------



Explanatory notes:



1) Code nomenclature means the numerical designation of the selected products listed in Council regulation on Customs and

statistical nomenclature and on the common customs tariff, in the version applicable Council in accordance 1. January 1, 2002.

2) the indication "ex" before the code nomenclature means that tag your tracks and dyed must not be only the mineral

oils that are identified in this annex.



Č. 4



List of mineral oils, which may not be due to tag your tracks, that would

tagging could be a problem using them



------------------------------------------------------------------------------------------------------------

Name and specification of the product nomenclature code ^ 1)


------------------------------------------------------------------------------------------------------------



1. Heavy fuel oil ex ^ 2) 2710 19 61

ex ^ 2) 2710 19 63

ex ^ 2) 2710 19 65

ex ^ 2) 2710 19 69



Specifications: oils



1.1 for the formwork, concrete structures,

2.1 as a separation of the liquid to the release of the forms.



------------------------------------------------------------------------------------------------------------



2. Motor oils, lubricating oils for compressors, ex 2710 19 81 ^ 2)

lubricating oils for turbines



Specifications: oils



2.1 for petrol engines, classified according to API, SF, SG, SH, SJ or higher

the classification,

2.2 for diesel engines, classified according to API CE, CF, CF-4, CG 4, CH 4 and higher

the classification,

2.3 for high speed engines,

2.4 for aviation turbine engines.

------------------------------------------------------------------------------------------------------------



3. Hydraulic oils, liquids for hydraulic purposes ex ^ 2) 2710 19 83



Specifications: oil



3.1 classified according to ISO 6743/4-H, HL, HM, HV, and the higher the classification,

3.2 classified according to DIN 51 524 HL, HLP and HVLP.

------------------------------------------------------------------------------------------------------------



4. Gear oils and oils for reducers ex ^ 2) 2710 19 87



Specifications: oil



4.1 classified according to API GL-3, GL-4, GL-5, GL-6 and higher classification,

4.2 intended for automatic transmissions, hydrodynamic and

4.3 intended for industrial mechanical gearbox.

------------------------------------------------------------------------------------------------------------



5. other lubricating oils and other oils ex ^ 2) 2710 19 91

ex ^ 2) 2710 19 99

Specifications: oils



5.1 for hardening and heat transfer with functional ingredients

5.2 for the cold rolling of metals,

5.3 as plasticizers in the manufacture of rubber,

5.4 as oil bearing,

5.5 as lubricating oils for vysokoobrátková bearing

5.6 as lubricants and preservatives in aviation

5.7 as automotive greases containing more than 70% of mineral oils,

5.8 as greases containing more than 70% of mineral oils.

------------------------------------------------------------------------------------------------------------

Explanatory notes:



1) Code nomenclature means the numerical designation of the selected products listed in Council regulation on Customs and

statistical nomenclature and on the common customs tariff, in the version applicable Council in accordance 1. January 1, 2002.



2) the indication "ex" before the code nomenclature means that tag your tracks and dyed must not be only the mineral

oils that are identified in this annex.



Annex 5



List of technologies for which tagging and dyeing of mineral oils

on the defect of their use



------------------------------------------------------------------------------------------------------------

The product name and specification of technology nomenclature code ^ 1)

------------------------------------------------------------------------------------------------------------



1. medium oil for other purposes-kerosene (kerosen) other 2710 19 25



Specifications of technology: technology



1.1 for the production of solid and liquid firelighters, classic oils and kerosene for lighting,

1.2 for the manufacture of products for polishing and cleaning,

1.3. for the production of foil PVC and metal foils,

1.4 for the manufacture of varnishes, paints, solvents and fillers,

1.5 for the production of detergents for the printing industry,

1.6 for the manufacture of detergents, hand gels

1.7 for the CB production used in the manufacture of paper, průpisového

1.8 for the intrinsic and electro-erosion machining of metals

1.9 use of oils in unchanged form for cleaning.

------------------------------------------------------------------------------------------------------------



2. Medium oils other 2710 19 29



Specifications of technology: technology



2.1. for the production of solid and liquid firelighters, classic oils and kerosene lighting,

2.2 for the manufacture of products for polishing and cleaning,

2.3 for the production of foil PVC and metal foils,

2.4 for the manufacture of varnishes, paints, solvents and fillers,

2.5 for the production of detergents for the printing industry,

2.6 for the manufacture of detergents, hand gels

2.7 for the CB production used in the manufacture of paper, průpisového

2.8 for intrinsic and electro-erosion machining of metals

2.9 use of oils in unchanged form for cleaning.

------------------------------------------------------------------------------------------------------------



3. Heavy gas oils 2710 19 41

2710 19 45

2710 19 49



Specifications of technology: technology



3.1 for the production of solid and liquid firelighters, classic oils and kerosene for lighting,

3.2 for the manufacture of products for polishing and cleaning,

3.3 for the production of printing inks,

3.4 for the manufacture of pharmaceutical, cosmetic and animal health products,

3.5 for the production of paints and thinners,

3.6 use of oils for forming and machining,

3.7 use of oils for hydraulic and circulating systems

3.8 use of oils for the formwork, concrete structures,

2.4 use of oils for technical purposes,

3.10 use of oils such as transformer oil and elektroizolačního,

3.11 use of oils such as oil tlumičového,

3.12 use of oils as a separation of the liquid to the release of the forms,

3.13. use of oils as the calibration fluid

3.14 use of oils as a test and the test liquid for diesel engines.

------------------------------------------------------------------------------------------------------------

Explanatory notes:



1) Code nomenclature means the numerical designation of the selected products listed in Council regulation on Customs and

statistical nomenclature and on the common customs tariff, in the version applicable Council in accordance 1. January 1, 2002.



Annex 6



List of technologies for which tagging of mineral oils for a defect

their use



------------------------------------------------------------------------------------------------------------

The product name and specification of technology nomenclature code ^ 1)

------------------------------------------------------------------------------------------------------------



1. Heavy fuel oil 2710 19 61

2710 19 63

2710 19 65

2710 19 69

Specifications of technology: technology



1.1 use of oils for the formwork, concrete structures,

2.1 use of oils as a separation of the liquid to the release of the forms.



------------------------------------------------------------------------------------------------------------



2. Motor oils, lubricating oils for compressors, 2710 19 81

lubricating oils for turbines



Specifications of technology: technology



2.1 use of oils for petrol engines, classified according to API, SF, SG, SH, SJ or higher classification,

2.2 use of oils for diesel engines, classified according to API CE, CF, CF-4, CG 4, CH 4 and higher classification,

2.3 use of oils for high speed engines,

2.4 use of oils for aircraft turbine engines.

------------------------------------------------------------------------------------------------------------



3. Hydraulic oils, liquids for hydraulic purposes 2710 19 83



Specifications of technology: technology



3.1 use of oils classified according to ISO 6743/4-H, HL, HM, HV, and the higher the classification,

3.2 use of oils classified according to DIN 51 524 HL, HLP and HVLP.

------------------------------------------------------------------------------------------------------------



4. Gear oils and oils for reducers 2710 19 87



Specifications of technology: technology



4.1 use of oils classified according to API GL-3, GL-4, GL-5, GL-6 and higher classification,

4.2 use of oils intended for automatic transmissions, hydrodynamic and

4.3 use of oils intended for industrial mechanical gearbox.



------------------------------------------------------------------------------------------------------------



5. other lubricating oils and other oils 2710 19 91

2710 19 99

Specifications of technology: technology



5.1 use of oils for hardening and heat transfer with functional ingredients

5.2 use of oils for cold rolling,

5.3 use of oils such as plasticizers in the manufacture of rubber,

5.4 use of oils such as oil bearing,

5.5 use of oils as lubricants for bearings, vysokoobrátková

5.6 use of oils intended for use as lubricants and preservatives in aviation

5.7 use of oils such as automotive greases containing more than 70% of the

mineral oils,

5.8 use of oils such as greases containing more than 70% of the minerálnícholejů.

------------------------------------------------------------------------------------------------------------



Explanatory notes:



1) Code nomenclature means the numerical designation of the selected products listed in Council regulation on Customs and

statistical nomenclature and on the common customs tariff, in the version applicable Council in accordance 1. January 1, 2002.



1 § 134 k) of paragraph 1. 1 and § 134v para. 1 of the law.



2) EN ISO 3170 Liquid petroleum products-manual sampling.



3) § 2 (2). 2 of the Act No. 513/1991 Coll., the commercial code, as amended by

amended.



4) § 31 para. 2 (a). (a)) 3, § 34 and 35 of the Act No. 563/1991 Coll., on the


accounting, in the wording of later regulations.



5) of Council Regulation No 2658/87/EC of 23 December 2003. July 1987 on the tariff and

statistical nomenclature and on the common customs tariff, as amended

the text of the.