Laying Down The Form Of Czech Conformity Marks, Its Implementation

Original Language Title: , kterým se stanoví podoba české značky shody, její provedení

Read the untranslated law here: https://portal.gov.cz/app/zakony/download?idBiblio=45461&nr=179~2F1997~20Sb.&ft=txt

179/1997.



GOVERNMENT REGULATION



of 25 June 2002. June 1997,



laying down the graphic form of the Czech brand compliance, implementation and

the location on the product



Change: 585/2002 Sb.



Government orders under section 22 of Act No. 22/1997 Coll., on technical

requirements for products and amending and supplementing certain acts, (hereinafter referred to as

the "Act") to implement section 12 paragraph 1. 3 and § 13 para. 3 of the Act:



§ 1



Czech graphic design has a conformity mark, the specimen of which is given in annex

No 1. The tag is placed directly on the product or on its packaging, or in the

and other accompanying documentation.



§ 2



(1) If a legal regulation ^ 1) provides for the obligation to indicate the product Czech

mark of conformity on the basis of conformity assessment carried out by the authorized

the person placed the Czech brand conformity with attached identification

the number of the authorized person ^ 2) directly on the product and its implementation must be

visible, legible and indelible.



(2) the model of the Czech brand conformity with attached identification number

an authorised person is given in annex 2.



§ 3



(1) if it is a mark of conformity increased or reduced, shall be

compliance with the mutual proportions between its individual elements.

Proportionally increases or decreases the size of the identification

the numbers of the authorized person, if it is attached to the Czech brand of matches.



(2) the height of Czech conformity marks must not be less than 10 mm, if other

Government regulations issued to implement the law provides otherwise.



§ 4



This Regulation shall enter into force on 1 January 2000. September 1997.



Prime Minister:



Prof. Ing. Klaus CSc in r.



Minister of industry and trade:



JUDr. Kühnl in r.



Č. 1



Pattern design marks of conformity



Note: Pattern is displayed on the auxiliary grid that is not part of the United

marks of conformity and is used for the purposes of his proportional increase or

Zoom out.



Č. 2



Model graphical form the Czech brand conformity with attached identification

number ^ 1) an authorised person



Note: Pattern is displayed on the auxiliary grid that is not part of the United

marks of conformity and is used for the purposes of his proportional increase or

Zoom out.



1) příkladmé number



1) Eg. Government Regulation No. 173/1997 Coll., laying down technical

requirements for gas appliances.



2) § 13 para. 3 of Act No. 22/1997 Coll., on technical requirements for

products and amending and supplementing certain acts.