179/1997.
GOVERNMENT REGULATION
of 25 June 2002. June 1997,
laying down the graphic form of the Czech brand compliance, implementation and
the location on the product
Change: 585/2002 Sb.
Government orders under section 22 of Act No. 22/1997 Coll., on technical
requirements for products and amending and supplementing certain acts, (hereinafter referred to as
the "Act") to implement section 12 paragraph 1. 3 and § 13 para. 3 of the Act:
§ 1
Czech graphic design has a conformity mark, the specimen of which is given in annex
No 1. The tag is placed directly on the product or on its packaging, or in the
and other accompanying documentation.
§ 2
(1) If a legal regulation ^ 1) provides for the obligation to indicate the product Czech
mark of conformity on the basis of conformity assessment carried out by the authorized
the person placed the Czech brand conformity with attached identification
the number of the authorized person ^ 2) directly on the product and its implementation must be
visible, legible and indelible.
(2) the model of the Czech brand conformity with attached identification number
an authorised person is given in annex 2.
§ 3
(1) if it is a mark of conformity increased or reduced, shall be
compliance with the mutual proportions between its individual elements.
Proportionally increases or decreases the size of the identification
the numbers of the authorized person, if it is attached to the Czech brand of matches.
(2) the height of Czech conformity marks must not be less than 10 mm, if other
Government regulations issued to implement the law provides otherwise.
§ 4
This Regulation shall enter into force on 1 January 2000. September 1997.
Prime Minister:
Prof. Ing. Klaus CSc in r.
Minister of industry and trade:
JUDr. Kühnl in r.
Č. 1
Pattern design marks of conformity
Note: Pattern is displayed on the auxiliary grid that is not part of the United
marks of conformity and is used for the purposes of his proportional increase or
Zoom out.
Č. 2
Model graphical form the Czech brand conformity with attached identification
number ^ 1) an authorised person
Note: Pattern is displayed on the auxiliary grid that is not part of the United
marks of conformity and is used for the purposes of his proportional increase or
Zoom out.
1) příkladmé number
1) Eg. Government Regulation No. 173/1997 Coll., laying down technical
requirements for gas appliances.
2) § 13 para. 3 of Act No. 22/1997 Coll., on technical requirements for
products and amending and supplementing certain acts.
