233/2010 Sb.
DECREE
of 15 November 2004. July 2010
on the basic content of the technical map of the village
The Czech Office of zeměměřický and the land registry provides under section 20 (2). 1 (b).
I) Act No. 200/1994 Coll. on surveying and amending and supplementing
Some laws related to its introduction, as amended by Act No.
380/2009 Coll.:
§ 1
Basic concepts
For the purposes of this Ordinance, means the
and transport infrastructure construction) roads, railways, water
roads, airports and related facilities,
(b)) measured the detailed points of detailed points specified by geodetickými methods
in the coordinate system of uniform trigonometric network cadastral
(S-JTSK) ^ 1) and in the level of the Baltic-after settlement (Bpv) ^ 1)
the accuracy required in the position of the base medium ordinate
error mxy = 0.14 m and at the height of the base medium altitude error
MH = 0.12 m ^ 2).
§ 2
Documents of the technical map
(1) all the elements of the technical map of the village are determined by the location and height.
(2) Polohopisným and výškopisným are the basis of the technical map of the village
and expressing the actual surface) maps, objects and technical situation
the device on the Earth's surface below it and above it,
(b)) geodetic part of the as-built documentation of buildings,
c) geometric plans
(d) other-purpose focus) of the actual state, they conform to the content and
accuracy in position in the base medium coordinate error mxy = 0.14 m and
at the height of the base medium altitude error mH = 0.12 m ^ 2).
(3) Survey of the village are the basis of the technical map
and point fields) auxiliary measuring points, the network of reference points
permanent stations,
(b)) in the field clearly identifiable detailed points which
the coordinates were determined geodetickými methods in S-JTSK and Bpv with
the accuracy required in the position of the base medium ordinate
error mxy = 0.14 m and at the height of the base medium altitude error
MH = 0.12 m ^ 2).
§ 3
The scope of the technical map
(1) the technical map of the village handles for the whole territory of the municipality, in part,
in particular for built-up areas ^ 3) or zastavitelnou area ^ 4) or for
corridors ^ 5).
(2) the basic content of the technical map of the village consists of
and out point markers) ^ 6 fields)
b) positioning,
c) altimetry,
(d) a description of the technical map of the village), and
e) metadata about the elements of the technical map of the village.
(3) elements of the core content of the technical map of the village are listed in the annex
of this order.
(4) the technical Content of the map of the village, the elements are held in accordance with the
the facts on the ground with the use of
and documentation of the actual construction) ^ 7),
b) geometrical plans
(c) the revision of the technical results of the map) of the municipality (detailed compliance check
the technical content of the map to the actual status),
(d)) of the special focus of the actual state, or
e) permissible measuring documentation ^ 8).
(5) the content of the technical map of the municipality is characterized in the manner prescribed
the appropriate technical standard ^ 9).
(6) the Objects with special regime of protection and the operation can be used as elements
technical maps of the village indicate only with the consent of the competent Ministry.
§ 4
Positioning
(1) the Positioning of the technical map of the village displays
and surface situation showing the boundary) and the type of terrain,
structures, workings and mining structures on the surface, hydrology and
Green,
(b)) objects and network transport and technical infrastructure on the Earth
the surface above it or below it.
(2) detailed positioning points are determined with the accuracy required mappings
the basic Middle ordinate error mxy = 0.14 m ^ 2).
(3) detailed positioning points taken from earlier documents, which
do not meet the required accuracy, can be used, but must be
differentiated so that it was clear that were taken from earlier documents.
§ 5
Altimetry
(1) view detailed points form the Contour changes on the ground,
in particular, the height dimensions to its characteristic points, for example,
the top of a mound, bareback, views, field edges, riverbanks, úpatnic
areas and water courses, technical and topographic hatches and
contour lines ^ 2) including a description of the height of the detailed points. Altimetry a
view detailed points changes on uličních and other hard landscaping
the areas on the manholes hatches of underground lines, the technical
infrastructure and underground structures.
(2) the altitude of the detailed points are determined with the accuracy required
at the height of the base medium altitude error mH = 0.12 m ^ 2).
(3) the Detailed points changes taken from the earlier documents, which
do not meet the required accuracy, can be used, but must be
differentiated so that it was clear that were taken from earlier documents.
§ 6
Description of the technical map of the village
Description of the technical map of the village contains the
and the name of the city), a city district, Borough, suburb, housing development,
City of the colony, the village, the village, part of the village, square, street,
(b) the name and description of the building), object (for example, the underground passages),
Group of buildings, public spaces, industrial plant, mine, Quarry,
the farmhouse, the heritage object or subject, loneliness, justice,
(c)), the number of the registration number and the number of indicative building
(d)), the number of the road description, the number of frontier character,
e) name of the railway station and bus stop, the direction of the railway line,
(f) the name of the port, marinas), water flow, water surface, water
works,
(g)) the name of the airport,
(h) the number and name, if any) point point field,
I) figure of elevation contours, description
(j) the chainage km post),
the description of the type of surface) of agricultural and forest land map
^ Mark 9), for other types of description of its surface (for example, asphalt,
concrete, tiles, paving stone, gravel, grass, park, unpaved
surface),
l) the name of the protected area, especially memorable tree protection zone,
the protected area, area,
m) the name of the conservation area, a conservation zone.
§ 7
Metadata about the elements of the technical map of the village
Metadata is part of the technical map of the municipality and include at least the information about
(a) a description of the basic information about the outcome of the survey activities
that was the basis for the designation of the element into the technical map of municipality),
(b) the source provider) geospatial data (geodata),
(c)) ^ 10) and acquirer processors
1. name, surname, address of the place of residence; If the permanent residence
on the territory of the United States address, if the preparer and
the processor is a natural person,
2. name, surname, place of business, the name or business name, if
the acquirer and processor of individual entrepreneur,
3. the name and address of the registered office of the business, if the acquirer and processor
legal person,
(d) officially authorized the original engineer) ^ 11) as the Verifier
the result of the survey, which was the basis for the designation of the element into the
technical maps of the village,
(e) the date of the focus element) the date of the last revision.
§ 8
The effectiveness of the
This Decree shall enter into force on 1 January 2000. January 2011.
President:
Ing. Dinner at the r.
Annex
The elements of the core content of the technical map
1. Positioning
1.1 the bounds
and) plot an undifferentiated,
b) wooden fence,
c) wire or metal fence,
d) hedge
e) enclosure wall,
(f)), the Foundation
g) interface areas (such as road or sidewalk),
h) the boundaries of the protected area, especially the boundaries of the area,
the boundaries of the protection zone, the border of a protected area, the boundaries of the
historic reserve, the bounds of the historic zone,
I) boundary points) to (h)), the boundaries of the invisible from above, from top to
the invisible intersection structure (on the surface) with the terrain or
from the top of the invisible boundary intersection structure covered with
(the above-ground structures),
j) measured the detailed points on the border.
1.2 types of terrain
a) arable land,
b) planted,
c) vineyard,
d) Garden,
e) Orchard,
f) permanent grassland,
g) forest cover,
h) green, lawn, Garden,
I) cemetery
the barren soil, j)
k) bogs (slať)
l) rock,
m) strip mine, a quarry.
1.3 Construction objects
and vertical support or doorframes) wall,
b) entrance into the building, the entrance to a fenced yard (gateway),
(c) building made of brick, concrete), metal,
(d) wooden building,)
e) building or podchodná part of the podchodná,
f) elevator in the sidewalk,
(g)) of the stair,
h) building objects according to letters a) to (g)) from the top of the invisible,
I) Church, Chapel, the Oratory of the Christian religion, cross,
j) synagogue,
to a small extent) items (for example, cross, Calvary, column
technological structures, a free-standing post box),
l) Bell Tower,
m) monument, statue, Memorial, monument,
n) weighbridge,
o) fuel dispenser fuel
p) high chimney,
q) free-standing display case, a permanent promotional object
r) bridge, a bridge,
with the engine, wind)
t) immovable cultural monument,
u) workings and mining structures on the surface,
in) measured the detailed points on the civil engineering structures.
1.4 transport infrastructure
and road barrier,)
b) handrails,
c) mechanical barrier (stand),
(d)) stop of public transport (označník)
e) luminous signalling device,
(f)) a traffic sign (column),
g) measured the detailed points on the transport infrastructure.
1.5 technical infrastructure on the Earth's surface
Lattice mast)
(b)), wood, concrete, metal mast or pole, střešník,
c) wall bracket,
d) shaft,
e) power plant, the switching station or substation, substation,
transformation station,
f) distributive Cabinet,
g) telephone booth,
h) enclosure of the gas equipment
I) vzdušníková shaft, air receiver,
j) hydrant above ground, underground,
the slide valve, to)
l) drain,
m) drain,
n) outdoor lamp,
about) the Distributor,
p) označník (for example, water, gas),
q) workings, mine construction and underground constructions that flow to the surface,
r) measured the detailed points on the technical infrastructure.
1.6 the Zahmer Kaiser
and the water flow)
(b)), junk or bulkhead sluice water flow,
c) water tank,
d) Marsh,
(e)) the water flow, the occasional draining, sewage sewer, a dry moat,
(f)) water well,
g) water tower,
h) Fountain, sculpture, fountain, water fountain, spring,
I) sediment, mud pits,
j) spring, spring, natural healing source,
k) stream gauge,
l) column ferry signalling,
m) coastal signal light,
n) Wharf,
o) measured the detailed points at vodstvu.
1.7 Foliage
and notable and detached) trees,
(b) the boundaries of the contiguous stand) (for example, groups of trees, bushes).
2. Measuring points
and point fields) ^ 6)
b) borderline character.
3. Transport infrastructure
and axis) of railway and tramway tracks
b) axis overhead contact line,
c) funicular, conveyor,
d) measured for detailed points on the transport infrastructure.
4. Underground structures
4.1 Mining underground structures.
4.2 Route engineering networks and outlines of the underground space.
4.3 construction of objects below the surface of the terrain-cellars and corridors
under the buildings extending outside the building.
4.4 Výškopisem in underground buildings are the height of the bottom shafts, objects,
channels and Chambers.
5. Technical infrastructure
5.1 technical infrastructure shows the measured detailed points,
liner, printed circuit and point elements. To view technical
infrastructure connects its description.
5.2. Technical infrastructure
a) water pipes,
b) sewer, pipeline,
c) reliever sewer,
d) pipeline pipe,
(e) the technical gas) pipe (for example, the oxygen of acetylene)
f) compressed air piping or diluted,
g) hot water pipes,
h) electrical wiring for public lighting and the other media management
(for example, radio, fire alarm systems),
I) power lines,
j) media management,
to the antenna cable distribution),
l) pneumatic post,
m) pipe pipeline.
6. Altimetry
and height point in) the detailed terrain, technical and transport
infrastructure, the measured height of the detailed description of points positioning,
b) characteristic point of the terrain (such as the top of a mound, bareback)
c) contour lines,
d) technical and topographic hatches,
e) off the edges,
(f) the height of the measured detailed description) points to the technical infrastructure and
underground structures.
1) § 2 (2). 1 Government Regulation No. 430/2006 Coll., on the establishment of surveying
reference systems and the national map works on the territory of the State and mandatory
the principles of their use.
2) CSN 01 3410 Maps of large scales. Basic and special-purpose maps.
3) § 2 (2). 1 (b). d) of Act No. 183/2006 Coll. on territorial planning and
building code (the building Act).
4) § 2 (2). 1 (b). j) Act No. 183/2006 Coll.
5) § 2 (2). 1 (b). I) Act No. 183/2006 Coll.
6) point 1 of the annex to Decree No. 31/1995 Coll., implementing Act No.
200/1994 Coll. on surveying and amending and supplementing certain laws
related to its introduction, as amended by Decree No. 365/2001 Coll.
7) Decree No. 499/2006 Coll. on construction documentation.
Decree 31/1995 Coll., implementing Act No. 200/1994 Coll., in
as amended.
8) Decree No. 435/1992 Coll., on mining surveying in mining documentation
activities and certain activities carried out using mining techniques, in
as amended.
9) CSN 01 3411 Maps of large scales. Drawing and markers.
10) § 2 (2). 2 (a). and Act No. 183/2006) Sb.
11) § 16 para. 3 of Act No. 200/1994 Coll. on surveying and amending and
certain laws related to its introduction, as amended by
Act No. 120/2000 Coll. and Act No. 186/2001 Coll.
