29/2004 Sb.
DECREE
of 20 December. January 2004,
implementing the Act 149/2003 Coll., on trade in the reproductive
material of forest tree species
44/2010: Sb.
402/2013: Sb.
The Ministry of agriculture shall be determined according to section 39 of the Act No. 149/2003 Coll.
marketing of forest reproductive material forests
major species and artificial hybrids, intended to restore the forest and to the
reforestation, and amending some related laws (Act on trade
with forest reproductive material), (hereinafter referred to as the "Act"):
§ 1
The requirements on the quality of forest reproductive material
(Section 4 of the Act)
(1) the quality of forest reproductive material is determined by the species of purity,
genetic, morphological, physiological characteristics and
the State of health.
(2) the quality of seed shall be determined in accordance with the applicable ČSN ^ 1).
Each section of the seeds or fruit of the referenced into circulation shall be assessed according to the characters
referred to in § 8 para. 4 of the Act.
(3) the quality of the seed referred to in paragraph 2 shall be determined in
independent laboratory authorised by the Ministry of accredited internationally
a recognized procedure for testing the quality of seed. For
an independent laboratory, the laboratory is considered to be operated by a legal entity or
a natural person who seed under consideration referred to in paragraph 2
does not refer to the circulation. The quality of the seeds found in the laboratory
another Member State of the European Union accredited by internationally recognised
the procedure for testing the quality of seed, shall be considered as
equivalent to the quality of the data shall be provided in the first sentence.
(4) in the case of small sections of the case does not apply the requirements referred to in
paragraph 2, provided that their weight does not exceed the mass specified directly
the applicable law of the European Union, laying down detailed
rules for the application of Council Directive 1999/105/EC as regards the definition of a small
quantities of seed ^ 10).
(5) sections of the fruits and seeds may be put into circulation only if they
species purity not less than 99%. The exception are closely related species
In addition to the artificial hybrids, the species purity ever spelled out the seeds or section
the fruit, if it is less than 99%.
(6) quality planting stock shall be determined according to the applicable ČSN ^ 2) and
be assessed according to the following characters:
and the root of the neck, thickness)
(b) the height of the part above ground)
(c)) the maximum age,
(d)) shall be inadmissible deformations, shape
e) ratio of volume to the volume of the above-ground parts of the roots.
(7) if necessary, checks the quality of planting material by
paragraph 6, an independent laboratory responsible for Ministry, accredited
an internationally recognized procedure for testing the quality of plants
material. As an independent laboratory, the laboratory is considered to be operated by
legal entity or natural person that planting stock under consideration
in accordance with paragraph 6 does not refer to the circulation. Quality planting stock
assessed in the laboratory in another Member State of the European Union
accredited internationally accepted procedure for testing the quality of
planting stock shall be deemed equivalent to the quality of the data shall be provided in accordance with
the first sentence.
(8) planting stock
and may be placed into the poplars) circulation, if it satisfies the requirements referred to in
Annex No. 4 and does not show defects as referred to in annex 5,
(b)) other species can be put into circulation if it satisfies the requirements referred to
in annexes 2 and 3 and does not show defects as referred to in annex 5,
c) intended for cultivation in the nursery can be put into circulation unless
It shows no defects listed in annex 5.
(9) ^ 3) parts of the plant can be put into circulation unless they meet the requirements
listed in annex 6.
(10) age and the method of planting stock cultivation of forest tree species is
indicates a formula whose structure is given in annex 7.
(11) reproductive material can be put into circulation only if:
does not show a harmful organisms ^ 4). Reproductive material, for
that has been known of harmful organisms ^ 4) subject
extraordinary measures must be accompanied by a plant from the continued use of
proven to be excluded.
§ 2
The details of merging partitions reproductive materials and determine the height
zones
(§ 5 para. 7 of the law)
(1) Altitude zones are determined by the degree of forest vegetation, identified from the
maps of forest vegetation degrees in regional forest development plans. ^ 5) in the
basic material growing out of land intended for the performance of
forest functions altitudinal range specifies the authorised person in their recognition.
(2) the conditions referred to in § 5 para. 4 of the Act, it is
merge partitions within a category acceptable identified
reproductive material or within a category selektovaného
of reproductive material, with the exception of reproductive material of the phenotypic
class A, of two or more units. In a sign of the new
the section of reproductive material in the registration number of the units of
replace the serial number of the pětimístným source code, where first place is
the 9 and the other four spots are made up of the serial number of the new
the partition assigned by a person authorised by the Ministry of.
(3) subject to the conditions set out in § 5 para. 4 of the Act, it is
permitted to merge partitions identified reproductive material derived from
seed sources and stands. The newly created partition is marked as reproductive
material from a seed source and in the registration number of the units of the
replace the serial number of the pětimístným source code, where first place is
the 9 and the other four spots are made up of the serial number of the new
the partition assigned by a person authorised by the Ministry of.
(4) If the conditions referred to in paragraphs 2 and 3, and subject to
the merge will be a section of reproductive material of a known source of origin and
partition of reproductive material derived from unknown origin, shall be
the newly created partition as unknown origin.
(5) if there is a merger of two or more sections of the reproductive
material, you must keep the original designation of the individual parts of the newly
the merged section and on the resulting detectable provably the partition will be
issued a new certificate of origin.
(6) the conditions referred to in § 5 para. 4 of the Act, it is
merge partitions within a category acceptable identified
reproductive material or within a category selektovaného
reproductive material derived from a single unit
ripening, while it should be noted the years of maturation
and the proportion of reproductive material for each of the years.
§ 3
Details of the notice of the collection of the reproductive material
(§ 5a, paragraph 5, of the Act)
Announcement of the pattern of collection of seed, taking parts of plants
or lifting of planting stock of natural regeneration, or about
the venue of the subscription part of the plant, if it subsequently vegetative množený
reproductive material, or to merge the sections of reproductive material
is given in annex 9.
§ 4
The details of the proof of origin and the application of the exposing
(§ 6 para. 8 of the Act)
(1) the model of the application for certificate of origin of the reproductive material
(hereinafter referred to as the "certificate of origin") is given in annex 10. Model application
for the issue of a certificate of origin for the partition merging sections (section 2)
is given in annex No. 11b.
(2) the patterns of certificate of origin referred to in annexes 12 to 14a.
§ 5
Details about the contents and the form of passport, about how to connect it
and the classification marking of parts of plants and planting stock
(§ 8 paragraph 9 of Act)
(1) to each section of the reproductive material exhibiting supplier
the accompanying sheet.
(2) the seed shall be made to the accompanying sheet according to the model
referred to in annex 16. To the entire section of seed with
connecting part and the accompanying worksheet. Part B is inserted one inside and
one is attached outside the form of the accompanying label to each package.
(3) for the part of the plant passport shall be drawn up in accordance with the specimen
in annex No. 17. The entire consignment of parts of the plant are attached part and
the accompanying worksheet. Part B is attached to each package of the shipment in the form
the accompanying label.
(4) for the planting stock shall be made to the accompanying sheet according to the model
set out in annex 18. The entire consignment of planting stock is
connecting part and the accompanying worksheet. Part B is attached to the whole consignment
by means of the accompanying label.
(5) the two parts of the accompanying worksheet can be distinguished by category
basic material: color-yellow-identified, selected-
Green, qualified-pink, tested-blue.
(6) If the supplier is entitled to issue plant passports
under another law ^ 4), use a cover sheet and accompanying
label as a plant Passport ^ 5a) in the genera or species
laid down in this regulation.
(7) the viability of the seeds or fruits of the ascertained biochemical test
dyeing in solution trifenylchlorid tetrazolia.
(8) the supplier supplying reproductive material from the United States to
another Member State of the European Union under section 25 c of the Act may, in
the accompanying data sheets referred to in annexes 16 to 18 indicate
the identification codes corresponding to relevant entries on the label or in
the supplier's document referred to in the recommendations of the Commission of the European Union ^ 11).
§ 6
Spool stand details to phenotypic classes and marking
(Section 10, paragraph 4, of the Act)
(1) the Phenotypic classification is a tree species in the stands of the spooler
phenotypic classes according to the criteria set out in annex 19. For mixed
the stands are classified in phenotypic classes all in the bushes represented
wood species.
(2) are subject to all kinds of Phenotypic classification tree species with the exception of
their artificial hybrids. Classified growths of alder, birch, crane,
Poplar, willow, pear trees and Apple trees polničky forest legacy 20 years, Elm,
Walnut, Douglas fir, white FIR, mention the enormous pines,
Cherry and kaštanovníku of edible 40 years and older stands of other
trees over 60 years of age.
(3) the results of phenotypic classification in the field do not indicate. In the forest
^ 6) marketing plan (the "plan") or the forest of
outline ^ 7) (hereinafter referred to as the "outline") are marked according to standard for their
the development.
§ 7
For details on marshaling recognised basic material to
units of
(Section 12, paragraph 2, of the Act)
(1) The unit will be the only recognised source, providing
reproductive material of the same category.
(2) the identification number of the unit provides unique identification
recognized by the unit. Track registration number units, the significance of his
the individual components and the designation of regions, in which the units of
they are located, including the scope of the branches of an authorised person, are listed in the
Annex No. 20.
(3) if the units are in the gene base, part of the
number units of tree species, for which the gene
base code is published, marking the gene bases assigned
responsible person. In the case of the publication of new gene base according to paragraph 2i
paragraph. 2 of the Act or the cancellation of the announcement of the gene base according to § 2 para.
3 of the Act, the designated person makes a change to the registration number units
and
and make up to the reference number) units designation code gene
the base, or
(b) revoke the designation code) gene base in the registration number of the recognised
unit.
§ 8
For details about the requirements for the recognition of the seed source and stands as a source of
identified reproductive material
(Article 13, paragraph 4, of the Act)
(1) for the source identified reproductive material, it is possible to recognise the
only sources which meet the requirements referred to in § 13 para. 1 of the law. In
the crop can be recognised even more trees.
(2) the recognition is sought, the owner of the resource. Model application for approval
the basic material is given in annex # 21. Annex to the application-
application for recognition of a seed source or for the source of the identified
the basic material is indicated in annex No. 23. In the case of stands
i shall submit proof of their phenotypic class. This document can be
copies of the relevant parts of the plan or the outline.
(3) proof of the approval, the Commissionaire contains in addition to the data
needed for a central register of recognised units (section 18 (1)
the Act) information
and the length of time the recognition); at the source of the seeds of the maximum of 10 years, stands for
the validity of the plan or the outline,
(b) the source merge) units, where the type of the source will be marked
as
1. the crop shall, if recognized by the merged unit stands,
2. the source of the seeds, if recognized by the unit merged seed sources,
or
3. the source of the seeds, if recognized by the unit merged seed sources and
stands,
(c)) the creation of units, which is assigned a registration number (§
7 (2). 2),
(d)) the land on which the resource is located; for seed sources growing outside
Les cadastral territory name and number and the reference number, other
seed sources and stands of the data on the drives of the spatial distribution of
forest ^ 12) in units of and
(e) the plan or applicable) identification of the outline, which is a recognition of the
carried out (applies to seed source growing on land intended for
performance of the functions of the forest and vegetation).
§ 9
For details about the requirements for the recognition of selektovaného source of reproductive
the material and its marking
(Article 14, paragraph 4, of the Act)
(1) as a source of selektovaného reproductive material can be recognized by the
one or more tree species in vegetation if it satisfies the requirements referred to in
Annex 22.
(2) the source of the selektovaného reproductive material recognised for a period of
the validity of the plan or the outline.
(3) in the field is the source of selektovaného of reproductive material
do not indicate.
(4) the owner shall submit a request for recognition of sources sources selektovaného
reproductive material authorised person. Model application for approval
the basic material is given in annex # 21. Annex to the application-
application for recognition of the crop as a source of selektovaného or the test
the basic material is indicated in annex No. 25.
(5) proof of approval, the Commissionaire contains in addition to the data
needed for a central register of recognised units (section 18 (1)
the Act) information
and length of time) recognition, which corresponds to the period of validity of the plan or the outline,
b) merge into phenotypic class B stands units,
(c)) the creation of units, which is assigned a registration number (§
7 (2). 2),
(d) any restrictions on the scope of recommendation) toll intentional mining carried out in the
the stands or on the protective period, after which it may be in the stands
toll carried out intentionally, mining only with the consent of an authorised person (§ 17
of the Act),
(e) the plan or applicable) identification of the outline, which is a recognition of the
carried out,
(f) forest floor distribution units) ^ 12) in units of and
(g)) meet the requirements for recognition of the sources listed in annex 22.
§ 10
For details about the requirements for recognition as a source of qualified resources
reproductive material and its marking
(Article 15, paragraph 4, of the Act)
(1) Seed Orchard or mixture is determined according to the documentation
the registered responsible person. As a source of qualified reproductive
material can be is to acknowledge, if their condition is in accordance with the
documentation and satisfy the requirements referred to in annex 26.
(2) Seed Orchard can be recognised as a qualified source of reproductive
material only when in a set in accordance with the documentation for the
establishing and maintaining the required number of clones with a good song
health and seed Orchard is at an age when she joined the fertility, the
participating in an absolute majority of the represented clones.
(3) the mixture is meant to recognize when it is able to provide
reproductive material in the composition, quantity and quality, according to the documentation
for the establishment of a recognized source of registered Commissionaire.
(4) parents of family are recognized as a qualified source of reproductive
material for the deliberate hybridization or seed collection of free sprášení.
Clones and are recognised as the source of the ortets qualified reproductive
pick parts of plants for the establishment of seed orchards,
realization of breeding programs and other purposes. Recognized can be
parents of families, clones of the ortets and which meet the requirements referred to in
Annex No. 26.
(5) the owner shall submit a request for recognition to the source the source of qualified
reproductive material authorised person. Model application for approval
the basic material is given in annex # 21. Annex to the application-
application for recognition of orchards or clonal mixtures as a source
qualified or tested reproductive material and request for
recognition of the parents of families, ortetu or clone as a source of qualified or
reproductive material to be tested are listed in annexes no 27a
27B.
(6) proof of approval, the Commissionaire contains in addition to the data
needed for a central register of recognised units (section 18 (1)
the Act) information
and the length of time the recognition); in the case of seed orchards and clonal mixtures up to a
for 10 years,
(b)) the creation of units, which is assigned a registration number (§
7 (2). 2),
(c) the parents of the family, ortetech) and clones, and that their list and descriptive
data, in the case of seed orchards and clonal mixture diagram their arrangement,
clips of their planting and year of Foundation resources
(d)) of the land on which the resource is located, the cadastral area,
plot, area, altitude and altitudinal range,
(e) the name of the resource, that is) if the seed orchards and clonal mixture, and
(f)) meet the requirements for the approval referred to in annex 26.
(7) the parents of families, clones and marks the owner of ortets on the ground two
yellow stripes with a width of 5 cm, with a space between the bars 20 cm at a height of 130 cm
above the ground. Into the space between the bars with the yellow color to write a serial number
source. If the tribes do not reach the required dimensions, shall ensure that the owner of the
indicate other suitable permanent way.
§ 11
For details about the requirements for the recognition of tested reproductive resources
the material and its marking
(To 16, paragraph 4, of the Act)
(1) Crop, seed Orchard, parents of families, ortet, clone or clonal mixture is
can be recognised as a source of tested reproductive material, if they meet the
requirements referred to in annex # 28.
(2) the owner shall submit a request for recognition of a source, the source of the test
reproductive material authorised person. Model application for approval
the basic material is given in annex # 21. Annex to the application-
the application for recognition for selektovaného or source test
of reproductive material, application for recognition of a seed or mixture
clones as a source of qualified or tested reproductive material
and a request for recognition of the parents of families, ortetu or clone as a source
qualified or tested reproductive material are listed in the
the annexes no 25, 27a and 27b.
(3) an integral part of the application for recognition of tested reproductive resources
the material is about the origin of documentation, testing, and test results
source.
(4) the document of approval, the Commissionaire contains in addition to the data
referred to in § 9 para. 5, section 10, paragraph 1. 6 and the data necessary for the Central
registration of units (article 18, paragraph 1, of the Act) information
and the purpose of use of the reproductive material), if the resource has been bred
for a special purpose, and
(b)) meet the requirements for recognition of the sources listed in annex # 28.
§ 12
For details about the information being written to the register
(Section 18, paragraph 2, of the Act)
For details about the information being written to the register are listed in the annex
# 30.
section 13 of the
Rules promulgation of gene bases, farming in the forests on the
their territory and their method of marking
(To section 2, paragraph 4, of the Act)
(1) the Gene base shall be published in the framework of individual areas
provenance for all tree important species of forest tree species for a period
the validity of the plan or the outline. Gene base it is possible to declare for
one or more trees.
(2) Gene base it is possible to declare in one or several
separate sections. The minimum amount one gene base is 100 ha.
(3) proof of publication of gene base of Commissionaire contains in addition to the
the data necessary for a central register (§ 2, paragraph 2, of the Act) data
about
and the length of time of its publication), which corresponds to the period of validity of the plan or
the outline,
(b) forest floor distribution units) ^ 12) in gene base,
(c) the plan or applicable) identification of the outline, which is a publication of
gene base,
(d) the gene base, name)
(e)) code base, gene
f) farming in the forests on the territory of the gene base.
(4) for trees, for which the gene base proclaimed, is used
preferably natural regeneration. If you need artificial regeneration, it is used in
tree species, for which the gene base declared, reproductive material
originating in the same gene base.
(5) the code designation of gene bases designated person assigned.
§ 14
The details of applying for licensure
(Section 20, paragraph 3, of the Act)
(1) if the applicant for the grant of licences a natural person, the application contains a
In addition to the General requirements for filing pursuant to the administrative code also:
and the designation of the subject matter of the license), whose grant is applied for,
(b) a certified copy of a document) to achieve vocational forestry
education,
(c) a description of the existing professional) forestry practice [paragraph 2 (b), (h))]
the applicant, indicating the number of years of practice,
d) written consent of the employer (article 21a (2) of the Act), if a natural
person by an employee of that he does not hold the position of head of the worker
the State enterprise, State organization or company
engaged in business activities in the field, which is the subject of the license, or
an employee of the public authorities (section 26 of the Act) or authorized person (§
30 of the law).
(2) if the applicant for the license grant legal person or natural person
the person who appoints a representative satisfying the conditions for the
the granting of the licence, the request contains, in addition to the General requirements for filing
According to the administrative code also:
and the designation of the subject matter of the license), whose grant is applied for,
(b)) name, surname, date of birth, social security number, if assigned,
place and County of birth and residence of the responsible representative of the applicant,
c) certified copy of proof of the achievement of vocational forestry
education responsible representatives,
(d) a description of the existing professional) forestry practice (the performance of professional activities in
forestry in the economic adjustment of forests, forestry education and
research and in the State administration of forests) of the responsible representative of the applicant with
indicating the number of years of practice,
(e)) the written consent of the employer (article 21a (2) of the Act), if a natural
person by an employee of that he does not hold the position of head of the worker
the State enterprise, State organization or company
engaged in business activities in the field, which is the subject of the license, or
an employee of the public authorities (section 26 of the Act) or authorized person (§
30 of the law).
(3) the documents referred to in paragraph 1 (b). (e)) or in paragraph 2 (a). (f))
are not part of the application for renewal of the license. Model application for the grant of
or extension of the period of validity of licences is given in Annex # 31.
§ 15
Details of record keeping and submission of records about partitions
of reproductive material and the management and presentation of evidence about the forest
nursery activities
(Section 24, paragraph 4, of the Act)
(1) the supplier, which said material into circulation, leads on each
the section of reproductive material of the register:
and) the Czech and the scientific name of tree species, where appropriate, indication of the clone or a mixture
clones,
(b) the registration number of the units),
(c) the number of the certificate of origin),
(d)) category of reproductive material (identified, selected,
qualified, tested),
e) region of provenance,
f) in the case of seed, the year of maturation,
g) in the case of planting stock, age and the type of seedlings or cuttings
used as planting stock and details about whether undercuts,
transplants or containerised; the data are given according to the formula, labelling
age and the method of planting stock provided for in annex 7,
h) in the case of parts of plants, the year of collection and the specifications of the parts were removed.
used for the production of planting material,
I) intended use of the reproductive material,
j) quantity of reproductive material
to the customer) designation; for natural persons, the first name, surname,
where applicable, the trade name or name, address of the place of residence or
address of place of business, if different from the address of the place of residence,
legal persons, business name and address of the registered office [§ 8 paragraph 1 (b) (c))
the law].
(2) the records referred to in paragraph 1 may be replace archiving
each accompanying sheets if they meet the requirements of this
the registration of.
(3) the licence holder, who operates a forest nursery activities, leads
In addition to the data referred to in paragraph 1 also in written and video recording.
(4) the Written evidence referred to in paragraph 3 shall include:
and keep an up-to-date register of) each section rozpěstovaného
planting stock; If in the course of the cultivation section to change the
the total quantity of planting stock by more than 10% off
the previous situation, the supplier acquires and records an entry together with the
the increase or decrease in the amount of plant material,
(b)) in the nursery areas specification with an indication of the total area of forest
kindergarten, total production area, and the proportion of free area, greenhouses,
fóliovníků and hotbed and other areas,
c) inventory of each section of rozpěstovaného planting stock
with the status as of 31. December of each calendar year, with an indication
1. section,
2. the scientific name of the species and, where applicable, clone or clonal mixture,
3. the registration numbers of the units,
4. the age and species of seedlings or cuttings as planting stock and
information about whether undercuts, transplants or containerised; the data are
placed according to the formula and the way the growing age labelling of planting
material referred to in annex 7,
5. category of reproductive material
6. the quantities of planting material,
7. the production of the area for which the partition is grown.
(5) Video evidence referred to in paragraph 3 contains:
and graphic map of the nurseries) with the designation of the individual production
areas,
(b) State records rozpěstovaného) graphics of planting stock by
each section with updates to 31. December of each calendar
of the year,
(c)) visible marking individual sections on the desktop, forest nurseries.
(6) on each section of reproductive material in its possession to the 31.
December of the previous calendar year, or that the circulation until 31 December 2006.
December of the previous calendar year, the licensee shall submit
designee to 15. January of each calendar year, the records of the
and the Czech Republic and the scientific name) trees, or about making a clone or
Clonal mixture,
(b) the registration number of the units),
(c) the number of the certificate of origin),
d) year of ageing, in the case of seed units
e) age and type of seedlings or cuttings as planting stock and
information about whether undercuts, transplants or containerised, it comes to
planting stock; the data are given according to the formula, the labelling of the age and
the method of planting stock provided for in annex 7,
f) year subscription and taken part in the specification part of the plant (eg.
butt cuttings, tissue culture) used for the production of planting material,
g) purpose of use of the reproductive material,
h) quantity of reproductive material
I) customer, that during the reporting period, said reproductive material to
circulation; for natural persons, the first name, surname or business name
or the name, the address of the place of residence or the address of the place of business,
If different from the address of the place of residence, with legal entities, business
name and address of the registered office [§ 8 paragraph 1 (b) (c)) of the Act].
(7) the licence holder, who operates a forest nursery activities,
be submitted in addition to the data referred to in paragraph 3, the
and) specification in the nursery with an indication of the total area of forest
kindergarten, total production area, and the proportion of free area, greenhouses,
fóliovníků and hotbed and other areas,
(b)) the production area, which are grown under various sections of the
to paragraph 3.
section 16 of the
The details of the import notification of reproductive material
(To section 25a, paragraph 5, of the Act)
Notification to the importer on the importation of basic material, the customs authority
the Administration is considered a declaration containing details of the
importers, details of the quantities actually imported forest reproductive material
and the code of an import permit (1416) referred to in section 44 of the customs declaration.
§ 17
The effectiveness of the
This Decree shall take effect on the date of its publication.
Minister:
Ing. Palas in r.
Č. 1
cancelled
Č. 2
Parameters of planting seedlings capable of normal business
the quality of the
Č. 3
The parameters of the root system of plantation capable of planting stock
the usual commercial quality
Č. 4
Parameters of planting poplars normal commercial quality
Č. 5
Unacceptable defects, merchantable quality planting stock
------------------------------------------------------------------------------------------------------------------
Defects to prevent the plants Rod Rod Rod Rod Rod Hard Soft
considered as corresponding to the usual FIR, larch pine Douglas fir deciduous broadleaves poplar
commercial grade spruce
------------------------------------------------------------------------------------------------------------------
and young plants) with nezaceleným + + + + + + +
poraněním1)
------------------------------------------------------------------------------------------------------------------
(b)) stem Deformation (a strong curvature), 2) + + +
------------------------------------------------------------------------------------------------------------------
c) planting stock with multiple kmínky2) + + + + + + +
------------------------------------------------------------------------------------------------------------------
(d)) Stem with a few terminálními + + + +
stems (shoots with multiple terminals) 2)
------------------------------------------------------------------------------------------------------------------
(e)) and the branches of the insufficiently mature + 3) + 3) + 4)
------------------------------------------------------------------------------------------------------------------
f) Stem without healthy Terminal + 3) + 3) + 3) + 3)
similar to bud scales
------------------------------------------------------------------------------------------------------------------
g) missing or inadequate branching ++
------------------------------------------------------------------------------------------------------------------
h) strong, reducing the damage to the life + + +
size of the youngest vintage
------------------------------------------------------------------------------------------------------------------
I) damaged the root krček6) + + + + + + + 5)
------------------------------------------------------------------------------------------------------------------
j) damaged kořen6) + + + + + + + 5)
------------------------------------------------------------------------------------------------------------------
the main root of the heavily deformovaný2)) + + + + + +
------------------------------------------------------------------------------------------------------------------
l) missing or heavily poškozené2) + + + + + 7) +
fine roots
------------------------------------------------------------------------------------------------------------------
m) planting stock showing serious + + + + + + +
damage of harmful organisms
------------------------------------------------------------------------------------------------------------------
n) physiological damage as a result of + + + + + + +
desiccation, overheating, the occurrence of mold
2, etc.)
------------------------------------------------------------------------------------------------------------------
1) with the exception of wounds after removal of the superfluous shoots or
Double peaks, injury and wounds caused by the branch for the collection
cuttings
2) detailed description see CSN 48 2115 (applies to výsadbyschopnému
sadebnímu material)
3) if they were not plants taken from the nursery in the growing
period
4) with the exception of clones of Populus deltoides angulata and tacamahaca section
poplar trees and their hybrids
5) with the exception of seedlings of poplar zastřižených in kindergarten
6) with the exception of prýtových pulp
7) with the exception of red oak
------------------------------------------------------------------------------------------------------------------
The criteria must be assessed relative to the type of forest tree species
and given the suitability of planting stock for the purposes of afforestation.
Note: excludes plant of negotiable + quality.
Poplar seedlings do not have marketable quality if they show
also, any of the following defects:
and) their wood is more than 3 years,
(b)) have fewer than five well developed buds,
(c)) have other damage than forming slices.
Č. 6
Merchantable quality requirements for parts of plants
And merchantable quality) requirements for parts of plants with the exception of cuttings
Poplar
Parts of the plant have a merchantable quality if they do not show any of the
the following defects:
and shape deformation)
(b)) the lack of vitality,
c) inappropriate age and size for the purposes of reproduction,
d) signs of mechanical damage, including injury resulting from procurement section
plants, or abiotic or biotic damage factors.
(B)) the requirements for merchantable quality prýtových cuttings of poplar
and Cuttings of poplar) are merchantable quality if they achieve a minimum
dimensions and do not show any of the following defects:
1. their wood is more than 2 years,
2. have less than two well formed buds,
3. the necrosis or other damage to the contingent by the action of harmful
organisms,
4. signs of desiccation, overheating, rot or wilting.
(b)) minimum dimensions osních cuttings of poplar normal commercial quality
+-------+---------------------+-------------------------------------------+
| Class | Minimum length (m) | The minimum thickness at the top end (mm) |
+-------+---------------------+-------------------------------------------+
| And ^ a) | 0.20 | 8 |
+-------+---------------------+-------------------------------------------+
| (B) ^ a) | 0.20 | 10 |
+-------+---------------------+-------------------------------------------+
| THE LINKS AND THEIR SPECIFICATIONS: |
| ^ a) class B in the table indicate a higher quality osních cuttings than class and "|
+-------------------------------------------------------------------------+
(C)) the requirements for merchantable quality Woody cuttings of poplar
a) stem cuttings shall take one of the following defects, it is not possible
considered to be of fair marketable quality requirements:
1. their wood is more than three years,
2. cuttings have less than five well developed buds,
3. pulp showing necrosis or other damage caused by harmful
organisms,
4. they show signs of desiccation, overheating, mould or decay,
5. pulp exhibit other damage than forming cuts,
6. they have more on poles,
7. they have too much curvature.
(b)) size classes for sets:
+-------------------+-----------------------------+------------------------+
| Class | Minimum diameter at the Center | The minimum height |
| | (mm) | (m) |
+-------------------+-----------------------------+------------------------+
| The area with the exception of the Mediterranean |
+-------------------+-----------------------------+------------------------+
| N1 | 6 | 1,5 |
+-------------------+-----------------------------+------------------------+
| N2 | 15 | 3.00 |
+-------------------+-----------------------------+------------------------+
| The Mediterranean region |
+-------------------+-----------------------------+------------------------+
| S1 | 25 | 3.00 |
+-------------------+-----------------------------+------------------------+
| S2 | 30 | 4.00 |
+-------------------+-----------------------------+------------------------+".
Č. 7
Formula age and manner of labelling of planting stock cultivation
Way of growing is marked by the formula, where the first number represents the number of
vegetation period prior to the školkováním, podřezáváním or adjustment to
the package, the second number indicates the number of cycles after this intervention;
both are to the nearest 0.5 year. The sum of both numbers, for multiple times
školkovaných, offset or podřezaných plants and more numbers in the
the formula is growing in the nursery with the exception of řízkovanců poplar,
which was classified in the above-ground part.
Way of growing is marked by the formula, where different symbols indicate:
+ školkování or planting in a container;
-undercutting roots;
(f) growing in artificial cover (a hotbed, greenhouse, fóliovník);
for the cultivation of krytokořenného of planting forest tree species without
using the technology of cutting through the air (without the cultivation of the "air
the pillow ");
in growing planting stock krytokořenného cutting technology
Air (growing on the "hover");
p pickup from the natural regeneration;
from the roots;
r řízkovanec;
t řízkovanec poplar;
with štěpovanec (roubovanec or očkovanec);
e explantát (in vitro).
Age and the method of growing seedlings of poplar and willow trees from vegetative
propagation is referred to by the formula, where the first number indicates the age of the aboveground part of the
seedlings, the second number indicates the age of the underground part of the seedlings, IE. the sum of the
both numbers does not specify the total age of seedlings and the + sign between the first and second
the number doesn't mean transplanting or školkování (see example 7 in the
the following text).
Samples indicate ways of planting stock cultivation of forest
tree species:
Example 1
0.5-0.5 is one-year prostokořenná seedlings grown in uncovered
mineral soil; prostokořennému semenáčku was during the growing
period of podřezán the root system.
Example 2
F1 + v1 is a two-year krytokořenná seedlings; one-year prostokořenný
seedling grown in artificial cover was whisked away and placed into a container, in which
the plant was grown technology one year cut through the air.
Example 3
R1 + k1 is a two-year krytokořenná seedlings obtained by vegetative propagation
by cuttings; one year zakořeňovaná plant was přesazena to
prorůstavého type of packaging in which it was grown for one year without the use of
the technology of cutting through the air.
Example 4
PV1 + 2-1 + k1 is a five-year krytokořenný odrostek; a one-year
krytokořenný seedling grown in artificial cover trim technology
the air was přeškolkován to exposed mineral soil, after two years he was
podřezán to the plant root system, the plant was after one year
picked up and přesazena in the packaging in which it was grown for one year without
using the technology of cutting through the air.
Example 5
2 + 0 is a two-year prostokořenný seedling grown in uncovered
mineral soil.
Example 6
p + 0 seedling vyzvednutý of natural regeneration (age not mentioned).
Example 7
T1 + 2 is obtained by cuttings of poplar seedlings prostokořenná with a one-year
the above-ground parts (after the first year of the cut) and a two-year underground parts.
Example 8
p + z1 is the prostokořenná seedlings; seedling, which was collected from
natural regeneration, one year zakořeňoval (age vyzvednutého semenáčku
is not mentioned).
Example 9
p + 2 is the prostokořenná seedlings; from the natural regeneration vyzvednutý
He was for two years a seedling of zaškolkován vyzvednutého semenáčku (age of the
does not mention).
Example 10?
F1 + 0 is one-year old prostokořenný seedling cultivated in artificial cover.
Example 11
PV1 + 0 is one-year old krytokořenný seedling cultivated in artificial cover
"air cushion". ".
Č. 8
cancelled
Č. 9
PATTERN
Announcement of the collection of seed, taking parts of plants or
picking plants from natural regeneration, or about the venue
Subscribe parts of plants, in the case of vegetative reproductive množený subsequently
material, or to merge the partitions of the reproductive material *)
Number: year:
Pobočka pověřené osoby: .......................................................................................
---------------------------------------------------------------------------------------------------------------
1) Designation of the supplier:
for natural persons:
name:........................:................................ date of birth:................
business name or name:................................................................................
address of the place of residence:.............................................................................
address of place of business, if different from the address of permanent residence:.............................................
...........................................................................................................
for legal persons:
business name or name:................................................................................
adresa sídla: .............................................................................................
2) supplier ID number, if assigned:........................................................
3) license No.................................................... became legally can...............
The number of single registry:...........................
4) Místo sběru: ..............................................................................................
(indication of units of spatial distribution of the forest or the name of the cadastral territory and parcel number)
5) region of provenance:................................................................. number: ... ... ... ... ... ...
6) kind of woody plants: a) a Czech name:...........................................................................
b) vědecký název: .........................................................................
(c)) indicate a clone or clonal mixture:.......................................................
7) reproductive material of the category: *) identified-selected-qualified-tested
8) kind of reproductive material: *) seed-plant parts-planting stock
9) type of basic material: *) seed source-stand phenotypic classes: A, B, C-seed
sad-parent families-ortet-clone-mixture
10) registration number units:........................................................................
11) estimated date of collection: ... ... ... ... ... ... ... ... ... ... ... ... to:..................................
12) maximum amount Planned:.............................................................................
13) the owner of the basic material: name......................... last name.........................
business name or the name.................................................................................
address of the place of residence or the address of the place of business, if different from the address of permanent residence or address
sídla: ....................................................................................................
telefon: .............................................. e-mail: ...........................................
14) consent of the owner of the collection, unless the owner of the supplier itself.............................................
Officially certified signature of the owner of the source:
V .............. dne ............. Signature (stamp) of the vendor:..........................
*) Delete where inapplicable.
In the case of multiple sections, including a request for merge partitions, you can identify the individual partitions on multiple annexes-
počet a seznam příloh: ....................................................................................".
Č. 10
PATTERN
The request for the issue of a certificate of origin of the reproductive material
Number: year:
Pobočka pověřené osoby: ......................................................................................
---------------------------------------------------------------------------------------------------------------
1) Designation of the supplier:
for natural persons:
name:......................:................................ date of birth: ... ... ... ... ... ... ...
business name or name:.................................................................................
address of the place of residence:............................................................................
address of place of business, if different from the address of permanent residence:..............................................
............................................................................................................
for legal persons:
business name or name:.................................................................................
adresa sídla: ..............................................................................................
2) supplier ID number, if assigned:.........................................................
3) license No................................................ became legally can...................
The number of single registry:...........................
4) vendor request is related to the announcement of the capture of seed, taking parts of plants or
picking plants from natural regeneration, or sampling of the parts of the plants if it subsequently
vegetative reproductive material * množený)
číslo: ............................... ze dne: ...................
5) quantities of seed:............... kg
the amount of other reproductive material: butt-leaf-root cuttings, tissue culture and embryo, eyelets,
layers, roots, cuttings, rods, and other parts of plants, planting stock................... DC
6) Datum sběru: ................................................................................................
7) region of provenance:................................................................ number: ... ... ... ... ....
8) the type of trees: a Czech name):.............................................................................
b) vědecký název: .............................................................................
(c)) indicate a clone or clonal mixture:...........................................................
9) reproductive material of the category: *) identified-selected-qualified-tested
10) kind of reproductive material: *) seed-plant parts-planting stock
11) type of basic material: *) seed source-stand phenotypic classes: A, B, C-seed packs-parent
family-ortet-clone-mixture
12) origin: *) autochthonous-neautochtonní-neautochtonní neindigenní of the indigenous area...................-unknown
13) altitudinal range:.........
14) registration number units:........................................................................
15) this is a genetically modified material: *) Yes-No
16) intended use: *) for the recovery of the forest and afforestation-for the special purpose of the forestry
17) year of maturation, in the case of seed:...........................................
18) age and the method of cultivation, in the case of planting stock:...........................................
V ............................... dne .............. Signature (stamp) of the vendor:.....................
*) Delete where inapplicable. ".
Annex 11a
cancelled
Annex 11b
PATTERN
The request for the issue of a certificate of origin of basic material for a section
merging partitions
Number: year:
Pobočka pověřené osoby: .......................................................................................
---------------------------------------------------------------------------------------------------------------
1) Designation of the supplier:
for natural persons:
name:..........................:............................ date of birth:...................
business name or name:.................................................................................
address of the place of residence:..............................................................................
address of place of business, if different from the address of permanent residence:..............................................
............................................................................................................
for legal persons:
business name or name:.................................................................................
adresa sídla: ..............................................................................................
2) supplier ID number, if assigned:.........................................................
3) license No.................................................... became legally can................
The number of single registry:...........................
4) vendor request applies to these merge sections:
and the certificate of origin) number:..............................., dated:................ issued:........
............................................................................................................
quantities of seed:............... kg
the amount of other reproductive material: *) butt-leaf-root cuttings, tissue culture and embryo, eyelets,
layers, roots, cuttings, rods, and other parts of plants, planting stock..................... DC
registration number units:.........................................................................
(b)) to the pedigree certificate number:............................., dated:................. issued:.........
............................................................................................................
quantities of seed:............... kg
the amount of other reproductive material: *) butt-leaf-root cuttings, tissue culture, and embryos,
the buds, layers, roots, cuttings, rods, and other parts of plants, planting stock............... DC
registration number units:.........................................................................
(c)) to the pedigree certificate number:.............................., dated:................. issued:........
............................................................................................................
quantities of seed:............... kg
the amount of other reproductive material: *) butt-leaf-kořenovéřízky, tissue culture and embryo, eyelets,
layers, roots, cuttings, rods, and other parts of plants, planting stock.............. DC
registration number units:.........................................................................
(d)) to the pedigree certificate number:.............................., dated:................. issued:........
............................................................................................................
quantities of seed:............... kg
the amount of other reproductive material: *) butt-leaf-kořenovéřízky, tissue culture and embryo, eyelets,
layers, roots, cuttings, rods, and other parts of plants, planting stock.............. DC
registration number units:.........................................................................
e) when more than four sections give more to a separate annex.
5) region of provenance:................................................................. number: ... ... ... ... ...
6) kind of woody plants: a) a Czech name:..............................................................................
b) vědecký název: ............................................................................
(c)) indicate a clone or clonal mixture:..........................................................
7) reproductive material of the category: *) identified-selected-qualified-tested
8) kind of reproductive material: *) seed-plant parts-planting stock
9) type of basic material: *) seed source-stand phenotypic classes: A, B, C-
seed kits-parent families-ortet-clone-mixture
10) origin: *) autochthonous-neautochtonní-neautochtonní neindigenní of the indigenous area................-unknown
11) altitudinal range:.........
12) this is a genetically modified material: *) Yes-No
13) intended use: *) for the recovery of the forest and afforestation-for the special purpose of the forestry
14) years of maturation, in the case of seed:.....................................................................
15) age and the method of cultivation, in the case of planting stock:.........................................................
16) Seznam příloh: .............................................................................................
............................................................................................................
............................................................................................................
............................................................................................................
V ......................... dne ............. Signature (stamp) of the vendor:...................................
*) Delete where inapplicable.
Č. 12
A CERTIFICATE OF ORIGIN, CERTIFYING THE IDENTITY OF THE REPRODUCTIVE MATERIAL
ORIGINATING FROM A SEED SOURCE AND OF
ISSUED IN ACCORDANCE with DIRECTIVE 1999/105/EC
--------------------------------------------------------------------------------------------------------------------
MEMBER STATE OF THE UNITED STATES OF AMERICA CONFIRMATION OF EC NO:/(KÓDČLENSKÉHO)/(NO)
CZ/...................................................^1)
--------------------------------------------------------------------------------------------------------------------
We confirm that the below described forest reproductive material was produced:
According to the EC directive
under the transitional provisions of the EC directive
1. Name: ^ 2)....................................... Scientific name: ^ 2).....................................
2. type of reproductive material
seed
parts of plants
planting stock
3. Category of reproductive material
source-identified
selected source
test source
4. The type of basic material
seed source
the vegetation
5. Účel použití:^3) ................................................................................................
6. National Register reference or identification of the basic material in the national register: ^ 4)
..................................................... / směs: ..................................................
7. the autochthonous neautochtonní unknown
indigenous neindigenní
8. the origin of basic material (for neautochtonní/neindigenní material, if this is known):.....................
................................................................................................................
9. the countries of the region of provenance and the basic material: ^ 5)....................................................
................................................................................................................
10. Altitude, respectively. altitudinal range habitat of the basic material: ^ 6)..............................
................................................................................................................
11. Rok zrání osiva:^7) .............................................................................................
12. the quantity of reproductive material: ^ 8)............................................................................
13. Is the material to which it is exposed to this sheet, the result of a division of a larger section, for which it was previously
EC issued? Yes No
No prior confirmation............................................ The amount of the original section................
14. the period of cultivation in the nursery: ^ 9)....................................................................................
................................................................................................................
15. the material has already been obtained from the seeds subsequently vegetatively reproduced? Yes No
Method of reproduction ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Početrozmnožovacích cycles...............
16. Other relevant information:......................................................................................
17. the supplier: ^ 10)
The name and address of the official agency: official agency Stamp Name of the person responsible:
Date: Signature:
--------------------------------------------------------------------------------------------------------------------
Explanatory notes:
1) AU (the code of the Member State)/authorized person/branch code serial number/year, kdekódy branch of an authorised person are:
+------------------------------+----------------------------+
| The name of a branch of an authorised person | The code of the branch of an authorised person |
+------------------------------+----------------------------+
| FMI headquarters | 100 |
| Branch Office in Stará Boleslav | 201 |
| Branch Office České Budějovice | 202 |
| Pilsen | 203 |
| Jablonec nad Nisou | 204 |
| Branch Office Hradec Králové | 205 |
| Branch Office Brno | 206 |
| Branch Frýdek-Místek | 207 |
| Branch Office Olomouc | 208 |
| branch of Kroměříž | 209 |
+------------------------------+----------------------------+
Editor's note. Powers of the individual branches of authorised persons within the regions is provided in annex No. 20 of this Decree.
In the case of the issuance of a certificate of origin on the reproductive material imported from third countries pursuant to Section 25b of the law
the branch of an authorised person instead of the code, the code "9999"
(Example: CZ/205/21/2014 = Czech Republic/Hradec Králové branch code/serial number 21/2014)
2) enter the Czech and the scientific name of the species.
3) Indicate either the purpose of the "forest", or for "other purposes".
4) enter the registration number of the unit.
5) enter the "Czech Republic" and the number and name of the natural forest area (example: Czech Republic, PLO 7-Brdská).
6) enter the altitude or the number of the forest vegetation of the degree. (Example: 1000 m or LVS 7.)
7) indicate the year in which the ripening of the seed (raw materials). In the case of trees such as SM, BO, MD, if collecting cones
performed at the beginning of the new year, it is stated as the year of the maturation of the year preceding. All the years of maturation, from
of which it is the merged partition.
8) in the case of seed, the amount shall be entered in kilograms with a precision
to three decimal places with the distribution of the raw material (pine cones, berries and fruit) and, in the case of seed plants
material and parts of plants, the number of pieces with a precision of one piece.
9) age and the method of cultivation; Enter the appropriate growing formula according to annex 7 of this Ordinance.
10) in the case of natural persons:
Name, surname, date of birth, business name or the name, place of residence (address), the location (address) of the business
(if different from place of residence) and the number of single vendor registry.
In the case of a legal person shall indicate:
Business name, address of company headquarters and address of place of business (if different from company address), the number of single
vendor registry.
Č. 13
A CERTIFICATE OF ORIGIN, CERTIFYING THE IDENTITY OF THE REPRODUCTIVE MATERIAL
ORIGINATING in the SEMENN0HO SET of parents and families (Y) 1)
ISSUED IN ACCORDANCE with DIRECTIVE 1999/105/EC
-----------------------------------------------------------------------------------------------------------------------
MEMBER STATE OF THE UNITED STATES OF AMERICA CONFIRMATION OF EC NO:/(KÓDČLENSKÉHO)/(NO)
CZ/.......................................................^1)
-----------------------------------------------------------------------------------------------------------------------
We confirm that the below described forest reproductive material was produced:
According to the EC directive
under the transitional provisions of the EC directive
1. a) Czech name: ^ 3)....................................... Scientific name: ^ 3)......................................
(b)) the name of the basic material (according to the data in the registry):................................................
2. type of reproductive material
seed
parts of plants
planting stock
3. Category of reproductive material
qualified resource
test source
4. The type of basic material
seed Orchard
parents of family(ies)
5. Účel použití:^4) ...................................................................................................
6. National Register reference or identification of the basic material in the national register: ^ 5)
...................................................................................................................
7. (if applicable) the autochthonous neautochtonníneznámý
indigenous neindigenní
8. the origin of basic material (for neautochtonní/neindigenní material, if this is known):........................
...................................................................................................................
9. the countries of the region of provenance and the basic material: ^ 6).......................................................
...................................................................................................................
10. Seed of: free pollination
additional pollination
artificial pollination
11. Year of ripening seeds: ^ 7).........................................
12. the quantity of reproductive material: ^ 8)................................................................................
13. Is the material to which it is exposed to this sheet, the result of a division of a larger section, which has been previously exposed to the
confirmation of the EC? ano ne ano ne
No prior confirmation........................................ The amount of the original section.......................
14. the period of cultivation in the nursery: ^ 9) 15. The number of components represented:
.......................................... rodiny ................................................
.......................................... klony ................................................
16. Altitude respectively. altitudinal range habitat of the basic material:....................................
17. the basic material Was obtained by using genetic modification yes no
18. in the case of reproductive material obtained from parents of family(ies):
Method of reproduction:................................. Percentage composition of families that make up the component..............
19. It was no longer a material obtained from the seeds subsequently vegetatively reproduced? Yes No
Method of reproduction ... ... ... ... ... ... ... ... ... ... .... The number of reproductive cycles...................................
20. Other relevant information:.........................................................................................
21. the supplier: ^ 10)
The name and address of the official agency: official agency Stamp Name of the person responsible:
Date: Signature:
-----------------------------------------------------------------------------------------------------------------------
Explanatory notes:
1 Parent family) within the meaning of section 2 of the letter g) of section 4 of Act No. 149/2003 Coll.
2) AU (the code of the Member State)/authorized person/branch code serial number/year, kdekódy branch of an authorised person are:
+------------------------------+----------------------------+
| The name of a branch of an authorised person | The code of the branch of an authorised person |
+------------------------------+----------------------------+
| FMI headquarters | 100 |
| Branch Office in Stará Boleslav | 201 |
| Branch Office České Budějovice | 202 |
| Pilsen | 203 |
| Jablonec nad Nisou | 204 |
| Branch Office Hradec Králové | 205 |
| Branch Office Brno | 206 |
| Branch Frýdek-Místek | 207 |
| Branch Office Olomouc | 208 |
| branch of Kroměříž | 209 |
+------------------------------+----------------------------+
Editor's note. Powers of the individual branches of authorised persons within the regions is provided in annex No. 20 of this Decree.
In the case of the issuance of a certificate of origin on the reproductive material imported from third countries pursuant to Section 25b of the law
the branch of an authorised person instead of the code, the code "9999"
(Example: CZ/205/21/2014 = Czech Republic/Hradec Králové branch code/serial number 21/2014)
3) enter the Czech and the scientific name of tree species.
4) shall be either the purpose of the "forest", or for "other purposes".
5) enter the registration number of the unit.
6) enter the "Czech Republic" and the number and name of the natural forest area (example: Czech Republic, PLO 7-Brdská
Highlands).
7) indicate the year in which the ripening of the seed (raw materials). In the case of trees such as SM, BO, MD, if collecting cones
performed at the beginning of the new year, it is stated as the year of the maturation of the year preceding. All the years of maturation, from which
originated the merged partition.
8) in the case of seed, the amount shall be entered in kilograms with a precision
to three decimal places with the distribution of the raw material (pine cones, berries and fruit) and, in the case of seed plants
material and parts of plants, the number of pieces with a precision of one piece.
9) age and the method of cultivation; Enter the appropriate growing formula according to annex 7 of this Ordinance.
10) in the case of natural persons:
Name, surname, date of birth, business name or the name, place of residence (address),
location (address) of business (if different from place of residence) and the number of single vendor registry.
In the case of a legal person shall indicate:
Business name, address of company headquarters and address of place of business (if different odadresy company headquarters),
the number of single vendor registry.
Č. 14
A CERTIFICATE OF ORIGIN, CERTIFYING THE IDENTITY OF THE REPRODUCTIVE MATERIAL
ORIGINATING FROM CLONES OR CLONAL MIXTURES
ISSUED IN ACCORDANCE with DIRECTIVE 1999/105/EC
-----------------------------------------------------------------------------------------------------------------------
MEMBER STATE OF THE UNITED STATES OF AMERICA CONFIRMATION OF EC NO:/(KÓDČLENSKÉHO)/(NO)
CZ/.......................................................^1)
-----------------------------------------------------------------------------------------------------------------------
We confirm that the below described forest reproductive material was produced:
According to the EC directive
under the transitional provisions of the EC directive
1. a) Czech name: ^ 2)....................................... Scientific name: ^ 2)......................................
(b)) Designation of clones or clonal mixtures:..............................................................................
2. type of reproductive material
parts of plants
planting stock
3. Category of reproductive material
qualified resource
test source
4. The type of basic material
clones
Clonal mixture
5. Účel použití:^3) ..................................................................................................
6. National Register reference or identification of the basic material in the national register: ^ 4)
..................................................................................................................
7. (if applicable) the autochthonous neautochtonní unknown
indigenous neindigenní
8. the origin of basic material (for neautochtonní/neindigenní material, if this is known):.......................
..................................................................................................................
9. the countries of the region of provenance and the basic material: ^ 5)......................................................
..................................................................................................................
10. the basic material Was obtained by using genetic modification yes no
11. a) Metoda reprodukce: ..........................................................................
(b)) the number of reproductive cycles:...........................................................
12. the quantity of reproductive material: ^ 6)..............................................................................
13. Is the material to which it is exposed to this sheet, the result of a division of a larger section, which has been previously exposed to the
confirmation of the EC? ano ne ano ne
No prior confirmation........................................ The amount of the original section.......................
14. the period of cultivation in the nursery: ^ 7)..................................................................
15. For clonal mixtures:
The number of clones in the mixture:..................................... The percentage of individual clones...............
16. Other relevant information:........................................................................................
17. the supplier: ^ 8)
The name and address of the official agency: official agency Stamp Name of the person responsible:
Date: Signature:
-----------------------------------------------------------------------------------------------------------------------
Explanatory notes:
1) AU (the code of the Member State)/authorized person/branch code serial number/year, kdekódy branch of an authorised person are:
+------------------------------+----------------------------+
| The name of a branch of an authorised person | The code of the branch of an authorised person |
+------------------------------+----------------------------+
| FMI headquarters | 100 |
| Branch Office in Stará Boleslav | 201 |
| Branch Office České Budějovice | 202 |
| Pilsen | 203 |
| Jablonec nad Nisou | 204 |
| Branch Office Hradec Králové | 205 |
| Branch Office Brno | 206 |
| Branch Frýdek-Místek | 207 |
| Branch Office Olomouc | 208 |
| branch of Kroměříž | 209 |
+------------------------------+----------------------------+
Editor's note. Powers of the individual branches of authorised persons within the regions is provided in annex No. 20 of this Decree.
In the case of the issuance of a certificate of origin on the reproductive material imported from third countries pursuant to Section 25b of the law
the branch of an authorised person instead of the code, the code "9999"
(Example: CZ/205/21/2014 = Czech Republic/Hradec Králové branch code/serial number 21/2014)
2) enter the Czech and the scientific name of the species.
3) Indicate either the purpose of the "forest", or for "other purposes".
4) enter the registration number of the unit.
5) enter the "Czech Republic" and the number and name of the natural forest area (example: Czech Republic, PLO 7-Brdská
Highlands).
6) in the case of seed, the amount shall be entered in kilograms with a precision
to three decimal places with the distribution of the raw material (pine cones, berries and fruit) and, in the case of seed plants
material and parts of plants, the number of pieces with a precision of one piece.
7) age and the method of cultivation; Enter the appropriate growing formula according to annex 7 of this Ordinance.
8) in the case of natural persons:
Name, surname, date of birth, business name or the name, place of residence (address), the location (address)
business address (if different from place of residence) and the number of single vendor registry.
In the case of a legal person shall indicate:
Business name, address of company headquarters and address of place of business (if different odadresy company headquarters), the number
single vendor registry.
Annex 14a
A CERTIFICATE OF ORIGIN, CERTIFYING THE IDENTITY OF THE REPRODUCTIVE MATERIAL
RESULTING FROM THE MERGING OF SECTIONS OF THE REPRODUCTIVE MATERIAL
ISSUED further to the Directive 1999/105/EC
-----------------------------------------------------------------------------------------------------------------------
MEMBER STATE OF THE UNITED STATES OF AMERICA CONFIRMATION OF EC NO:/(KÓDČLENSKÉHO)/(NO)
CZ/......................................................^1)
-----------------------------------------------------------------------------------------------------------------------
We confirm that the below described forest reproductive material was produced:
According to the EC directive
under the transitional provisions of the EC directive
1. Český název:^2) ......................................... Scientific name: ^ 2)..........................................
2. type of reproductive material
seed
planting stock
3. Category of reproductive material
source-identified
selected source
qualified resource
4. The type of basic material
seed source
the vegetation
seed Orchard
5. Účel použití:^3) ....................................................................................................
6. Individual partitions to be merged:
-----------------------------------------------------------------------------------------------------------------------
The number of the certificate of origin, the identification of the basic material Quantities Year maturation
(registration number units)
-----------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------
The new registration number recognised
units for the merged partition:
-----------------------------------------------------------------------------------------------------------------------
7. the autochthonous neautochtonní unknown
indigenous neindigenní
8. the origin of basic material (for neautochtonní/neindigenní material, if this is known):.........................
...................................................................................................................
9. the countries of the region of provenance and the basic material: ^ 4)........................................................
...................................................................................................................
10. Altitude, respectively. altitudinal range habitat of the basic material: ^ 5).................................
...................................................................................................................
11. Rok zrání osiva:^6) ................................................................................................
12. the quantity of reproductive material: ^ 7)...............................................................................
13. Is the material to which it is exposed to this sheet, the result of a division of a larger section, for which it was previously
EC issued? Yes No
No prior confirmation.............................................. The amount of the original section................
14. Doba pěstování ve školce:^8) .......................................................................................
...................................................................................................................
15. any other relevant information:.........................................................................................
16. the supplier: ^ 9)
The name and address of the official agency: official agency Stamp Name of the person responsible:
Date: Signature:
-----------------------------------------------------------------------------------------------------------------------
Explanatory notes:
1) AU (the code of the Member State)/authorized person/branch code serial number/year, kdekódy branch of an authorised person are:
+------------------------------+----------------------------+
| The name of a branch of an authorised person | The code of the branch of an authorised person |
+------------------------------+----------------------------+
| FMI headquarters | 100 |
| Branch Office in Stará Boleslav | 201 |
| Branch Office České Budějovice | 202 |
| Pilsen | 203 |
| Jablonec nad Nisou | 204 |
| Branch Office Hradec Králové | 205 |
| Branch Office Brno | 206 |
| Branch Frýdek-Místek | 207 |
| Branch Office Olomouc | 208 |
| branch of Kroměříž | 209 |
+------------------------------+----------------------------+
Editor's note. Powers of the individual branches of authorised persons within the regions is provided in annex No. 20 of this Decree.
In the case of the issuance of a certificate of origin on the reproductive material imported from third countries pursuant to Section 25b of the law
the branch of an authorised person instead of the code, the code "9999"
(Example: CZ/205/21/2014 = Czech Republic/Hradec Králové branch code/serial number 21/2014)
2) enter the Czech and the scientific name of the species.
3) Indicate either the purpose of the "forest", or for "other purposes".
4) enter the "Czech Republic" and the number and name of the natural forest area (example: Czech Republic,
PLO 7-Brdská).
5) enter the altitude or the number of the forest vegetation of the degree. (Example: 1000 m or LVS 7.)
6) indicate the year in which the ripening of the seed (raw materials). In the case of the SM, BO dřevinjako, MD,
If collecting cones performs at the beginning of the new year, as the maturing of the previous year. Provide all
years of maturation, from which arose the merged partition.
7) for quantities shall be the following:
in the case of raw materials: raw materials to the nearest kg 1 kg [example: raw materials (cones)-157 kg],
in the case of seed: seed to the nearest kg 3 decimal places,
in the case of plants from natural regeneration or parts of plants: the pieces with a precision of 1 piece.
7) in the case of seed, the amount shall be entered in kilograms with a precision
to three decimal places with the distribution of the raw material (pine cones, berries and fruit) and, in the case of seed plants
material and parts of plants, the number of pieces with a precision of one piece.
8) age and the method of cultivation; Enter the appropriate growing formula according to annex 7 of this Ordinance.
9) in the case of natural persons:
Name, surname, date of birth, business name or the name, place of residence (address),
location (address) of business (if different from place of residence) and the number of single vendor registry.
In the case of a legal person shall indicate:
Business name, address of company headquarters and address of place of business (if different odadresy company headquarters), the number
single vendor registry.
Annex 15
cancelled
Č. 16
_________________
*) Note. ASPI: Endnote 2), 4 points), 7, 9)) and 10) is added:
2) in the case of a natural person, the name and surname, or business
company or name, address of residence, address, place of business, if different from the address of the place of
permanent residence, and the number of the single registry, if it has been allocated. In the case of a legal person shall bear the
business name, address of the registered office and number of the single registry, if it has been allocated.
4) enter the Czech and the scientific name of the species.
7) enter the abbreviation for the relevant source, and it WS (seed source), after (the stand), SS (seed set), RR (parents family)
KL/clone), SK (mixture), OR (ortet)
9) enter the abbreviation of one of the options: A (autochthonous), NAI (neautochtonní non-indigenous), NAN-... (neautochtonní
neindigenní from the region of provenance-with no hyphen), N (unknown).
10) indicate the quantities of seed in kilograms with a precision of three decimal places with the distribution of
on the raw material (pine cones, infructescenses, fruits) and seed.
Č. 17
_________________
*) Note. ASPI: Endnote 2), 4 points), 7, 9)) and 12):
2) in the case of a natural person, the name and surname, or business
company or name, address of residence, address, place of business, if different from the address of the place of
permanent residence, and the number of the single registry, if it has been allocated. In the case of a legal person shall bear the
business name, address of the registered office and number of the single registry, if it has been allocated.
4) enter the Czech and the scientific name of the species.
7) enter the abbreviation for the relevant source, and it WS (seed source), after (the stand), SS (seed set), RR (parents family)
KL/clone), SK (mixture), OR (ortet)
9) enter the abbreviation of one of the options: A (autochthonous), NAI (neautochtonní non-indigenous), NAN-... (neautochtonní
neindigenní from the region of provenance-with no hyphen), N (unknown).
12) enter the designation N1 classification in accordance with annex 6 part C of this Ordinance.
Č. 18
_________________
*) Note. ASPI: Endnote 2), 4 points), 7) and 9):
2) in the case of a natural person, the name and surname, or business
company or name, address of residence, address, place of business, if different from the address of the place of
permanent residence, and the number of the single registry, if it has been allocated. In the case of a legal person shall bear the
business name, address of the registered office and number of the single registry, if it has been allocated.
4) enter the Czech and the scientific name of the species.
7) enter the abbreviation for the relevant source, and it WS (seed source), after (the stand), SS (seed set), RR (parents family)
KL/clone), SK (mixture), OR (ortet)
9) enter the abbreviation of one of the options: A (autochthonous), NAI (neautochtonní non-indigenous), NAN-... (neautochtonní
neindigenní from the region of provenance-with no hyphen), N (unknown).
XIII. 19
The criteria for the classification of wood in the stands of the phenotypic classes
1. Information about the origin of the
According to documents from earlier times or other appropriate means
(distribution of trees in the vegetation, terrain inaccessibility) is needed
to determine whether this is a cropping of the autochthonous, or neautochtonní
known or unknown origin.
Growths of phenotypic classes and should be autochthonous or at least
probably autochthonous. This class can be used to classify the vegetation
neautochtonní, if the quantity of production stand out for their quality, durability,
or other valuable properties.
Growths of phenotypic class B may be autochthonous and neautochtonní
known or unknown origin.
2. Volume production
Growths of phenotypic classes A and B must have a volume production (volume
growth of wood) is greater than the mean value is valid for the
comparable environmental and economic conditions.
3. morphological characters
Trees in stands phenotypic classes A and B shall have appropriate
morphological characters, in particular the straightness, plnodřevnost, circular cross-section
the tribe, the appropriate type of branching and good natural cleaning tribe.
The proportion of dvojáků and spiral strains should be minimal.
4. the health and potential of-resistance:
Trees in stands phenotypic classes A and B shall not be contaminated by the harmful
agents and must be resistant to unfavourable to the Habitat and climate
conditions on the site-with the exception of damage caused by pollution
the environment and must be adapted to the ecological conditions in the
region of provenance.
5. The quality of the wood:
The quality of the wood it is necessary to take into account: in individual cases may
be an essential criterion for selection.
6. Vegetation phenotypic class C
Growths of phenotypic class C show the average economic value and less
in good health. for the tree species listed in § 3, paragraph 2
of law, stands this category not seeds (these growths, however,
can restore natural regeneration), other tree species is recovered,
If they are recognized as the source identified.
7. Forests phenotypic class D
Growths of phenotypic class D are genetically and economically inappropriate
(below average economic value), or are clearly
impaired health or significantly impaired stability.
Harvested seed from them and it is not it is possible to restore the natural regeneration;
These growths should be gradually renew and replace them with stands
genetically more valuable.
XIII. 20
Track registration number recognised, the importance of its individual units
components and the designation of public authorities
Identification number of the unit has the following composition:
CZ-2-3-DBZ-00005-06-7-and-G999-1
The meaning of each character:
1.) CZ = the Czech Republic mark (according to the international regulation ISO
3166-1, two-character).
2.) code number of the categories of forest reproductive material (character values: 1 =
identified, 2 = selected, 3 = 4 = qualified, tested,
single character).
3.) code number of the source type [character values: 1 = seed source, 2A =
phenotypic classes and vegetation, 2B = vegetation B, 2 c class phenotypic = crop
phenotypic class C (for international use shall be single-character 2
= the crop), 3 = seed sets, 4 = parent families, 5 = ortet, clone, 6 = mixture
Clones (max. two-character)]. The RM source categories IDENTIFIED by the
resulting from the merger of crops and seed sources are it's numeric type code
source 1 = seed source.
4.) Stands tree species. For domestic use (a maximum of Czech
three-character given to designated person). For international use
scientific (according to character values: Commission Regulation (EC) no 1597/2002, the three-digit
character).
5.) the source sequence number (assigned by the designated officer, a five-digit character).
6.) a numeric code for region of provenance (character values: according to annex No 1
Decree No. 83/1996 Coll., dvojmístný character).
7.) the code number in the height range (character values: forest vegetation level
pursuant to section 2 of this order, single character). In the case of seeds of the category
IDENTIFIED growing outside the forest lays down the code of the height, the designated zone
person pursuant to § 2 (2). 1 of this order.
8.) designation of the County in which the unit is situated is recognised (character values
According to column 3 of the following table, single character).
9.) designation of units located in gene base
(values: G = gene symbol base, 999-1 = five-digit code
assigned responsible person). Indication code gene base in the recognised
the unit is in accordance with the code designation of gene bases assigned
responsible person according to § 13 para. 5 of this order.
Designation of the County in which the unit is situated is recognised and the scope of the
the branch of an authorised person
+----------------------------+----------------+------------------------------------+
| Name of region | The designation of the region | Branch of an authorised person |
+----------------------------+----------------+------------------------------------+
| The capital city Prague | A | Stará Boleslav |
| Central Bohemian Region | S | Stará Boleslav |
| South Bohemian Region | C | České Budějovice |
| The Czech Republic | P | Pilsen |
| Region Of Karlovy Vary | K | Pilsen |
| Ústí Nad Labem Region | U | Jablonec nad Nisou |
| The Liberec Region | L | Jablonec nad Nisou |
| Hradec Králové Region | H | Hradec Králové |
| Pardubice Region | E | Hradec Králové |
| Vysočina Region | J | Brno |
| South Moravian Region | B | Brno |
| Olomouc Region | M | Olomouc |
| The Moravian-Silesian Region | T | Frydek-Mistek |
| Zlín Region | Z | Kroměříž |
| military újezdy | V | According to territorial jurisdiction to the edge |
+----------------------------+----------------+------------------------------------+
Č. 21
PATTERN
XIII. 22
Requirements for the approval of basic material resources selektovaného
The growths, which are to be recognised as the basic material
In addition to the selected category must meet the requirements for inclusion in the
phenotypic classes A or B referred to in annex # 19 meet at the same time
the following requirements:
1. Isolation:
Stands must be situated at a sufficient distance from the inappropriate stands
of the same species or from crops of related species or varieties with
these species can interbreed.
Growths of phenotypic class D genetically and economically inappropriate may not be
be located closer than 100 m from recognised stands phenotypic class B and 200 m
from recognised phenotypic classes and crops.
2. the size of the crop:
The total area of vegetation proposed for certification must have a minimum of 1 ha.
A smaller area of the stands may be incurred to the proprietary or
the technical division of the stands, before this splitting larger than 1 ha.
Furthermore, in the case of the remains of an extremely valuable stocks. The number of trees
tree species that is the subject of the recognition, however, must not fall below 40 PCs.
Stand with an area of less than 1 ha, may be accepted only if its recognition
recommended that the expert opinion of an authorised person.
3. the age and stage of development:
You can recognise the stands of alder, birch, poplar, willow, crane, PEAR polničky and
Apple tree forest legacy 20 years, Elm, walnut, Douglas fir, FIR of mention
huge, pines, cherry and kaštanovníku of edible
the older 40 years and other tree species stands over 60 years.
4. Homogeneity:
Stands must show a normal degree of individual variability
morphological characters. Inappropriate trees should be, if necessary,
delete.
5. Adaptation:
It must be obvious that the vegetation is adapted to the ecological conditions in the
region of provenance.
6. Species purity:
In the case of closely related species (e.g. summer and oak
the winter) is assessed species purity (the representation of individual species in the
the crop).
7. origin:
According to documents from earlier times or other appropriate means is
needed to establish whether it is autochthonous, non-indigenous
neautochtonní neautochtonní neindigenní, an indigenous or unknown; u
crop neautochtonního neindigenního it should be noted the origin (area
provenance).
8. the minimum population size:
Stands must consist of one or more groups of well spaced
trees of recognized species, which are large enough to ensure
species sprášení. To avoid adverse effects of
the crossing must chosen sufficiently large number of stands and the density of the
individual trees recognized species on a particular area.
Č. 23
PATTERN
Annex to the application for the recognition of the basic material-request for
recognition of the seed source or for source identiofikovaného
of reproductive material
Explanatory notes:
1 serial number
2 an abbreviation of trees up to three-digit character of Bohemia (assigned responsible
a person)
3 region of provenance = natural forest area
4 altitudinal range = forest vegetation; for the seed source, which is
outside of the land intended for the performance of functions of the forest (PUPFL), the designated officer shall determine
5 origin: A = autochthonous
NAI = indigenous neautochtonní
NaN-... = neautochtonní # neindigenní from the region of provenance ... ...
N = unknown
6 age (years)-at the stand of the LHP (LHO), at the source of the seeds of the qualified
an estimate of the
7 Marking stand (the lowest unit of the 3-d distribution of the forest);
the structure of the stand number: Department/Panel/stand/stand group
7A Zakmenění from the new FOREST MANAGEMENT PLAN (LHO); for seed sources must not be used
7B Representation of new wood species LHP (LHO); for seed sources must not be used
the area of the entire crop of 8 new LHP (LHO); for seed sources are
does not fill
9 Reduced the area recognized by the trees from the new FOREST MANAGEMENT PLAN (LHO); This is calculated as
the actual area of each deck multiplied by zakmeněním and representation (example: 1.50
x 0.9 x 0.80 = 1.08 ha; where the actual area of each deck is 1.50 ha, zakmenění
It is 0.9 and representation is 0.80); for seed sources must not be used
10 Phenotypic class (A, B or C); for seed sources must not be used
11 number and the name of the cadastral territory
12 a parcel number
13 the number of tree seed source
14 Note (to crops and seed source)
Č. 24
cancelled
Č. 25
PATTERN
Annex to the application for the recognition of the basic material-request for
recognition for the source of the selektovaného or of tested reproductive
material
Explanatory notes:
1 serial number
2 an abbreviation of trees up to three-digit character of Bohemia (assigned responsible
a person)
3 region of provenance = natural forest area
4 altitudinal range = forest vegetation level
5 origin: A = autochthonous
NAI = indigenous neautochtonní
NaN-... = neautochtonní # neindigenní from the region of provenance ... ....
N = unknown
6 age (years)-at the stand of the LHP (LHO)
7 Marking stand (the lowest unit of the 3-d distribution of the forest),
the structure of the stand number: Department/Panel/stand/stand group
7A Zakmenění from the new FOREST MANAGEMENT PLAN (LHO)
7B Representation of new wood species LHP (LHO)
the area of the entire crop of 8 new LHP (LHO)
9 Reduced the area recognized by the trees from the new FOREST MANAGEMENT PLAN (LHO); This is calculated as
the actual area of each deck multiplied by zakmeněním and representation
(example: 1.50 x 0.9 x 0.80 = 1.08 ha; where the actual area of each deck is
1.50 ha, zakmenění is 0.9 and representation is 0.80)
10 Phenotypic class (A, B or C)
11 Number of gene base, in which the vegetation is located (to be completed for
tree species, for which the gene base proclaimed)
12 Note (e.g., proposal of the withdrawal period, the proposal limits the amount of the toll
the intentional extraction, etc.)
Č. 26
Requirements for the approval for the production of qualified reproductive
material
1. Seed orchards
(1) documentation (location set, a kind of tree species, quality, default
individuals-ortetů, objective, crossing design and location, components and schema
information about their provenance, insulation, layout) and any
changes of these must be approved and registered with the legacy
person.
(2) the component clones shall be selected for their outstanding characters, special
attention is paid to the criteria:
and the age and stage of development): stands must consist of trees whose
age and stage of development allow the use of selection criteria.
b) Adaptability: it must be clear that the vegetation is adapted to the
ecological conditions in the region of provenance.
(c)) the State of health and resistance: trees in stands must not be contaminated by
harmful organisms and must be resistant to unfavourable to the Habitat and
the climatic conditions in the place of occurrence, with the exception of damage caused by the
pollution of the environment.
(d)) the volume of production: for the approval of selected stands volume production must be
wood mass in the normal case be higher than the mean value is valid
for comparable environmental and economic conditions.
(e)) the quality of wood: in some cases it may be an essential criterion
When you select.
(f)) shape and growth habit: trees in stands must show particularly good
morphological characters, in particular the straightness and roundness of the tribe, for the shape and
the size of branches and good natural pruning. In addition, the
a forked and solid trunks should occur in small
extent.
(3) the component clones or families shall be planted or by
the approved plan prepared by the Commissionaire, and so that each of its
the component has been determined.
(4) Educational interventions in seed orchards shall be described together with the
the selection criteria that you used, and registered with the
responsible person.
(5) the seed orchards shall be managed and reproductive material in them
reap so as to achieve the objectives of the orchards. In the case of seed
orchards for the production of an artificial hybrid must prove
the percentage of hybrids in the reproductive material.
2. Parents of family
(1) the parents of the family shall be selected for their outstanding characters, in particular
the criteria referred to in section 1 (1). (2), or for its combination
the ability to.
(2) the objective, crossing design and pollination system, components, isolation, location and
any changes of these must be approved and registered with the
responsible person.
(3) the identity, number and proportion of parents in a mixture must be approved and
registered responsible person.
(4) in the case of the parents of a family destined to the production of an artificial hybrid
need analysis, the percentage of hybrids in the reproductive
material.
3. Clones
(1) ortets used for the production of clones shall be selected for their outstanding
the characters, in particular the criteria referred to in section 1 (1). (2).
(2) Clones shall be identifiable on the basis of distinguishing marks
approved and registered by the responsible person.
(3) the value of individual clones shall be established by experience or have been demonstrated
sufficiently prolonged experimentation.
(4) the recognition of clones by a Member State is limited to the maximum number of years
or a maximum number of offspring (ramet).
4. Clonal mixtures
(1) clonal mixture shall meet the requirements set out in section 3, paragraph 3. (1)
(2) and (3).
(2) the identity, number and shares of the clones contained in mixtures, selection method
and the default clones must be approved and registered by the responsible person.
Each mixture shall have sufficient genetic diversity.
(3) the recognition by a Member State to a maximum number of years or
the maximum number of offspring (ramet).
Č. 27a
PATTERN
Annex to the application for the recognition of the basic material-request for
recognition of orchards or clonal mixtures as a source of qualified or
of tested reproductive material
Č. 27b
Annex to the application for the recognition of the basic material-request for
recognition of the parents of families, ortetu or clone as a source of qualified or
of tested reproductive material
Explanatory notes:
1 serial number
2 the area of provenance = natural forest area
3 altitudinal range = forest vegetation; for the resources that lie outside the
land intended for the performance of functions of the forest (PUPFL), the designated officer shall determine it
4 Designation of the crop (the lowest unit of the 3-d distribution of the forest),
the structure of the stand number: Department/Panel/stand/stand group; u
sources outside the land intended for the performance of functions of the forest and the cadastral area
parcel number
5 the altitude in meters m.
6 age (years) of the new FOREST MANAGEMENT PLAN (LHO)
7 origin of the crop: A = autochthonous
NAI = indigenous neautochtonní
NaN-... = neautochtonní # neindigenní from the region of provenance ... ....
N = unknown
8 tree Height in meters
9 the stem thickness in inches
10 the shape of the trunk (1 = even, 2 = low, 3 = strong crooked crooked)
11 Cleaning the tribe (1 = excellent 2 = good, 3 = poor)
12 the Crown Shape (oval, 1 =, 2 =, 3 = sometimes 4 =
vřetenovitá, opposite ovate, 5 = 6 = with a domed Crown, 7 = straight, 8 =
spherical, 9 = vlajkovitá)
13 the Crown Length (1 = low, 2 = medium, 3 = long)
14 Note ".
Č. 28
Requirements for the recognition of tested reproductive material sources
1. REQUIREMENTS for ALL TYPES of TESTS
and) General
The basic material, which is to be subject to testing must
meet the appropriate requirements of the annexes to the No. 22 and no. 26.
The tests used for the approval of tested reproductive material shall
prepared, laid out, implement and evaluate an internationally recognised
the procedure. When comparative testing of reproductive material is tested
compared with one or, if possible, with the more recognized or in advance
selected standards.
(b)) characters to be examined
I. Tests must be designed so as to serve to evaluate certain
character set for each test.
II. particular attention should be paid to the criteria, such as
to adaptation, growth capability, response to biotic and abiotic
factors. In addition, there is a need to evaluate the other characters that are
considered significant with regard to the planned special purpose, in
relation to the ecological conditions prevailing in the place of the execution of the test.
c) documentation
On the place of carrying out of tests it is necessary to keep records that describe the
site and climatic conditions, soil, previous use, establishing
the crop species, management measures and damages caused by abiotic/biotic
agents; These records must be made available by a public authority.
The age of the material and the results at the time of the test must be recorded by the authority
the public administration.
(d) the method of test execution)
I. each sample of the reproductive material for establishing comparative test
vyséván, must be planted and grown the same way.
II. Any attempt should be based according to the recognised statistical principle
with the use of a sufficient number of trees, in order to assess
individual characters for each of the tested components.
(e) evaluation and the validity of the results)
I. results of the attempts are evaluated with the help of an internationally recognised
the statistical procedure; the results is required for each of the
the test characters.
II. Method of implementation of the experiments and the results obtained in the different
cases, a freely available.
III. There is a need to adopt an opinion on areas likely
přizpůsobenosti within the country in which the trial was conducted and to the characters,
that may limit its usefulness.
IV. If during the attempt that the reproductive material does not possess
-speeches of the characters of the basic material,
-similar to the potential exposure to-resistance economically significant
damaging agents such as the basic material,
the recognition of such resources should be rejected.
2. the requirements for GENETIC EVALUATION of the BASIC COMPONENT
MATERIAL
and may be genetically) components of the following
basic material:
seed orchards, parents of families, ortets, clones and clonal mixtures;
b) documentation
For the approval of basic material is necessary following
documentation:
I. the identity, origin and genetic origin of the evaluated components,
II. plan of the crossing for the production of reproductive material of the inspected
testing.
c) test procedures
The following requirements must be met:
I. the genetic value of each component is needed to evaluate the
two or more evaluation test, of which at least one is in the
environmental conditions that match the conditions of the intended
use of the reproductive material.
II. The superiority of the reproductive material to be put into circulation,
is determined on the basis of their genetic value and special plan of the crossing.
III. Comparative tests and genetic evaluation assesses the designated officer.
d) evaluation:
I. the superiority of the reproductive material than standard shall be calculated in
relation to the standard for a single character or group of characters.
II. for each of the major characters is necessary to establish whether or not his
genetic value is less than the genetic merit of the standard.
3. REQUIREMENTS for COMPARATIVE TESTING of REPRODUCTIVE MATERIAL
and the selection of the sample of the reproductive material)
I. sample of the reproductive material for comparative testing must be
a representative for reproductive material derived from a given source.
II. Reproductive material produced by the sexually shall
-be harvested in seed orchards in good crop, artificial sprášení is
permissible;
-be harvested by methods that ensure that the acquired
samples are representative.
(b)) Standards
I. the performance of standards used for comparative purposes in the tests should
be in the area in which the tests are carried out, for a long time
well known. The standards represent the material at the beginning of
you try to and under the same environmental conditions for which it was submitted to the
certification, has already proved to be useful for forestry. They have a
If possible, come from crops that have been selected according to the criteria
referred to in annex 19 and 22, or from the source, which has been officially certified for
the production of basic material of the "tested" category.
II. The comparative test of the artificial hybrids must be, if possible,
between the standards used by both parents.
III. If possible, it is necessary to use several standards. If it is
necessary and justifiable, can be replaced with the most appropriate standards
material represented in the test or the mean value of the components
represented in the test.
IV. The same standards are to be used in all tests of the ongoing
in the various site conditions.
c) evaluation
I need to demonstrate statistically significant superiority in
compared with the standard for at least one significant character.
II. it must be clearly evident way to indicate if there are significant
economic or ecological characters, which have been significantly
worse result than in the case of standard; their consequences must be
offset by favourable characters.
4. CONDITIONAL APPROVAL
As a basis for conditional approval may be used early reviews of young
developmental stages. The superiority of the detected based on early reviews
It should be within 10 years.
5. early TESTS
For conditional or final recognition of the public authority may recognise
attempts in forest nurseries, greenhouses and laboratories, where they can
demonstrate that between the character and the characters that would be typically
evaluated in the forestry field tests (field planting), there are
the close correlation. Other characters to be examined shall comply with the requirements referred to in
point 3.
Č. 29a
cancelled
Č. 29b
cancelled
Č. 30
For details about the information being written to the register
A central register of recognised units on the territory of the Czech Republic leads
the authorized person in the register, with each unit records
and trees, for) the type which was the source of the recognised
(b) for recognition of the source) the County in which the resource is located, and a branch
the person responsible for a source,
(c)) of the owner of the source; for natural persons name, surname, or. business
company or name, address of the place of residence or address of
the business, if different from the address of the place of residence, for legal
people business name and address of the registered office,
(d) a description of the resource):
1. in the case of forest: area, the reduced area recognized by the trees,
high grade, age, zakmenění, representation of tree species, the withdrawal period,
toll limitation intentional exploitation;
2. for parents families, ortetů and clones: age, height, stem thickness, description
phenotypic characters;
3. for seed orchards and clonal mixtures: origin, number and composition of clones, area
object;
4. type, serial number, source, source
e) intended use and category of forest reproductive material for which it was
the source of the recognised
(f) the registration number of the units),
g) location; a natural forest area shall be provided for all categories,
unit of solid distribution of forest resources in forest land
cadastral area and parcel number for resources outside the forest land,
Central longitude and latitude area
a natural forest area for resources identified and selektovaného
geographical location of the basic material resources category
qualified and tested reproductive material,
h) altitudinal range, in which the unit is situated is recognised, i.e.. either forest
the growing degree of maps of regional forest development plans or height
zone specified by the responsible person
I) origin; Enter the autochthonous, non-indigenous, neautochtonní neautochtonní
neindigenní or unknown, and in the case of tested reproductive
material, an indication of whether it is a genetically modified organism.
Č. 31
Č. 32
cancelled
1) CSN 48 12 11 (forest seed management-collection, quality and quality tests
fruit and seeds of forest tree species).
2) CSN 48 21 15 (sadebni material lesnich Drevin).
3) § 2 (b). and) point 2 of Act No. 149/2003 Coll., on trade in the reproductive
material of forest tree species.
4) Act 326/2004 Coll., on phytosanitary care and amendments
related laws, as amended.
5) section 23 of Act No. 289/1995 Coll., on forests, and amending and supplementing certain
laws (forest law).
5A) paragraph 15 of Decree No. 215/2008 Coll., on measures to prevent the introduction and
distribution of harmful organisms of plants or plant products,
as amended.
6) section 24 of Act No. 289/1995 Coll.
7) section 25 of Act No. 289/1995 Coll.
10) Commission Regulation (EC) No 2301/2002 of 20 October. December 2002 laying
down detailed rules for the application of Council Directive 1999/105/EC as regards the
the definition of small quantities of seed.
11) Commission recommendation No 2012/90/EU of 14. February 2012 concerning the
the instructions for the information which permit the identification of the partitions of the reproductive
material of forest tree species and the particulars to be given on the labelling
or in the document supplier.