229/2012 Sb.
REGULATION OF THE GOVERNMENT
of 19 December 2003. June 2012,
amending Government Decree No. 176/2008 Coll., on technical
requirements to machinery, as amended by regulation of the Government No. 170/2011
SB.
The Government ordered pursuant to section 22 of Act No. 22/1997 Coll., on technical
requirements for products and amending and supplementing certain acts, as amended by
Act No. 205/2002 Coll. and Act No. 34/2011 Coll. (hereinafter the "Act") to
implementation of section 7 (1). 8, § 11 (1). 2, § 11a paragraph. 2 (a). (c)), section 12 paragraph.
1 and 3 and section 13 of the Act:
Article. (I)
Regulation of the Government No. 176/2008 Coll. on technical requirements on mechanical engineering
equipment, as amended by regulation of the Government No. 170/2011 Coll., is hereby amended as follows:
1. In section 4, paragraph 4. 1 (a). and the number "2)" is replaced by "3".
2. In article 4, paragraph 1, the following paragraph 2, including notes
footnote No 11:
"(2) on the market or putting into service of machinery shall be listed, as referred to
in annex 12 to this regulation ^ 11).
11) Commission decision 2012/32/EU of 19 December. January 2012, which
the Member States the obligation to prohibit the placing on the market of Cutter
Accessories for portable křovinořezům mulching type. ".
Paragraphs 2 to 6 shall be renumbered as paragraphs 3 to 7.
3. the following Annex No. 12, which reads:
"Annex 12 to the regulation of the Government No. 176/2008 Sb.
THE MACHINERY, WHICH MAY NOT BE PLACED ON THE MARKET OR PUT INTO SERVICE
Cutting depth control to the portable type accessories křovinořezům
consisting of multiple connected metal parts. ".
Article. (II)
The effectiveness of the
This Regulation shall enter into force on the date of its publication.
The President of the Government:
RNDr. Nečas in r.
Minister of industry and trade:
Mudr. Cuba v. r.