We are constantly working to improve the site, and to add more laws to our database. If you are receiving value from using our site please consider signing up for a subscription to support the site and to get many additional benefits for you.
Key Benefits:
(You can close this ad by clicking anywhere on the page.)
Key Benefits:
447. Regulation of the Federal Minister for Transport, Innovation and Technology, with which the examination and evaluation unit regulation is amended (5. Novelle to PBStV)
Pursuant to sections 24 (5), 24a (7), 56 (4), 57 (9), 57a (2), (7c) and (8) and § 58 (2) and (4) of the Kraftfahrgesetz 1967, BGBl. No. 267, as last amended by the Federal Law BGBl. I No 149/2009, shall be ordered:
The examination and evaluation unit ordinance, BGBl. II No 78/1998, as last amended by the BGBl Regulation. II No 83/2010, shall be amended as follows:
Section 16 (9) reads as follows:
" (9) Already before the 1. By 31 December 2010, authorized bodies may use equipment which is authorised by Annex 2a in the version of the BGBl Regulation. II No 101/2004. Already existing equipment according to Appendix 2a Z 9 (game detectors), which meet the following requirements, may be used until 31 December 2019:
| 1. |
for vehicles up to 3,5 t: |
|||||||||
| a) |
at least one external force-operated plate, which can be moved either separately in the longitudinal and transverse directions or diagonally or elliptically; control of the movement via a manual control unit (recommended with integrated hand lamp) with a sufficient number of freedom of movement; |
|||||||||
| b) |
technical data: |
|||||||||
| aa) |
Axle load ≥ 2.0 t, |
|||||||||
| bb) |
Wheel load ≥ 1.0 t, |
|||||||||
| cc) |
Shear force per side ≥ 3 kN, |
|||||||||
| dd) |
regardless of the number of power-operated plates, a total movement distance of ≥ 70 mm must be achieved; |
|||||||||
| 2. |
for vehicles over 3,5 t: |
|||||||||
| a) |
two power-operated plates, which can be moved either separately in the longitudinal and transverse directions or diagonally or elliptically; control of the movement by means of a manual control unit (recommended with integrated hand lamp) with sufficient movement clearance; |
|||||||||
| b) |
technical data: |
|||||||||
| aa) |
Axle load ≥12 t, |
|||||||||
| bb) |
Wheel load ≥ 9 t, |
|||||||||
| cc) |
Thrust per side ≥ 30 kN, |
|||||||||
| dd) |
Total movement path with both plates from stop to stop ≥100 mm. |
|||||||||
| From 1. Entities authorised by January 2010 shall no longer be allowed to use equipment according to Appendix 2a Z 5. From 1. Jänner 2020 is generally no longer permitted to use such equipment in accordance with Annex 2a Z 5. " |
||||||||||
Bures
