803 Kar 2:417. Steel Erection

Link to law: http://www.lrc.ky.gov/kar/803/002/417.htm
Published: 2015

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now
      803 KAR 2:417. Steel erection.

 

      RELATES TO: KRS 338.015(1), (2), 29

C.F.R. 1926.750-1926.761

      STATUTORY AUTHORITY: KRS 338.051(3),

338.061

      NECESSITY, FUNCTION, AND CONFORMITY: KRS

338.051(3) requires the Kentucky Occupational Safety and Health Standards Board

to promulgate occupational safety and health administrative regulations. 29

C.F.R. 1926.750 to 1926.761 establish the federal requirements relating to

steel erection. This administrative regulation establishes standards to be

enforced by the Department of Workplace Standards in the construction industry

relating to steel erection.

 

      Section 1. Definitions. (1)

"C.F.R." means Code of Federal Regulations.

      (2) "Employee" is defined by

KRS 338.015(2).

      (3) "Employer" is defined by

KRS 338.015(1).

 

      Section 2. The construction industry

shall comply with the following federal regulations published by the Office of

the Federal Register, National Archives and Records Administration, except as

modified by the definitions in Section 1 and requirements in Section 3 of this

administrative regulation:

      (1) 29 C.F.R. 1926.750 through 1926.761,

and Appendices, revised July 1, 2010; and

      (2) The amendment to 29 C.F.R. 1926.754

as published in the May 17, 2010 Federal Register, Volume 75, Number 94; and.

 

      Section 3. Fall Hazards. (1)(a) The

language in paragraph (b) of this subsection shall apply in lieu of 29 C.F.R.

1926.760(a)(1).

      (b) Each employee engaged in a steel

erection activity who is on a walking/working surface with an unprotected side

or edge ten (10) feet or more above a lower level shall be protected from fall

hazards by guardrail systems, safety net systems, personal fall arrest systems,

positioning device systems, or fall restraint systems.

      (2)(a) The language in paragraph (b) of

this subsection shall apply in lieu of 29 C.F.R. 1926.760(a)(3).

      (b) Connectors and employees working in

controlled decking zones shall be protected from fall hazards in accordance

with subsections (5) and (6) of this section, respectively.

      (3)(a) The language in paragraph (b) of

this subsection shall apply in lieu of 29 C.F.R. 1926.760(b)(1).

      (b) Each connector shall be protected in

accordance with subsection (2) of this section from fall hazards of ten (10)

feet or more above a lower level.

      (4)(a) The language in paragraph (b) of

this subsection shall apply in lieu of 29 C.F.R. 1926.760(b)(3).

      (b) Each connector shall be provided

with, wear, and utilize, at heights of ten (10) feet or more above a lower

level, a personal fall arrest system, positioning device system, or fall

restraint system; or be provided with other means of protection from fall

hazards in accordance with subsection (1) of this section.

      (5)(a) The language in paragraph (b) of

this subsection shall apply in lieu of 29 C.F.R. 1926.760(c).

      (b) A controlled decking zone (CDZ) may

be established in that area of the structure over six (6) feet and up to ten

(10) feet above a lower level if metal decking is initially being installed and

forms the leading edge of a work area. In each CDZ, the following shall apply:

      1. The language in subparagraph 2 of this

paragraph shall apply in lieu of 29 C.F.R. 1926.760(c)(1).

      2. Each employee working at the leading

edge in a CDZ shall be protected from fall hazards of ten (10) feet or more

above a lower level. (16 Ky.R. 1103; eff. 12-15-1989; Am. 21 Ky.R. 2275; eff.

4-20-1995; 28 Ky.R. 2249; eff. 6-14-2002; 33 Ky.R. 1134; 1529; eff. 1-5-2007;

36 Ky.R. 179; 593; eff. 10-2-2009; 37 Ky.R. 1069; Am. 1437; eff. 1-3-2011.)