201 KAR 14:110.
School equipment; plant layout.
RELATES TO: KRS
317.410, 317.440
STATUTORY
AUTHORITY: KRS 317.430, 317.440
NECESSITY,
FUNCTION, AND CONFORMITY: Barber school equipment and plant layout
requirements.
Section 1. Each
barber school must send the board a certificate from the zoning commission and
a certificate from a licensed electrician or electrical firm showing the
electrical equipment to be properly installed, properly grounded, and in safe
operating condition.
Section 2.
Barber schools must be completely equipped with standard tonics, dyes, tints,
bleaches, shampoos, cosmetics, permanents, etc., all electrical devices and
other equipment for the proper instruction of students, as well as with
equipment and supplies for sanitation and hygiene.
Section 3.
Barber schools must be so located as to be entirely separated and have no
connection with any beauty or barber shop or any other place of business.
Section 4. No
barber school will be approved by this board having a space less than six (6)
feet square for each student enrolled therein.
Section 5. All
accredited barber schools shall have a suitable and separate room to be used
for demonstration and study, said room to have necessary charts and equipment
to carry out the curriculum. The following equipment is required for this room:
(1) Sufficient
charts, blackboards, etc., to teach all subjects of barbering.
(2) Sufficient
classroom chairs with armrests, or desks, that will enable the student to take
notes.
Section 6. Every
barber school is required to maintain a separate lavatory and toilet for male
and female students.
Section 7. All
barber schools must comply with city and state building codes and zoning
commission codes.
Section 8.
Lockers, dressing rooms and restrooms must be provided.
Section 9.
Booths and partitions in the work department shall be sufficiently low to
permit the observation of students while they are working.
Section 10. No
school of barbering will be approved by the board having less than the following
equipment: shampoo bowls; dryers; manicure tables; (a liquid sterilizer is
required on each manicure table) hair cutting chair; wall plates; covered waste
containers; individual paper towels; and containers for the use of students.
Section 11. (1)
Each barbering school is required to furnish a supply or dispensing room in
which each student may obtain actual experience for a period of one (1) to
three (3) weeks, as indicated by the course of instruction. The student will be
directly responsible to the owner for any damage incurred due to the student's
negligence or willful destruction while working in the supply or dispensing
room.
(2) Supply or
dispensing and sterilization room equipment required for a barbering school:
(a) Supply of
clean linens, neck cloths, etc.
(b) Lavatory for
washing all combs, instruments, containers, etc.
(c) Bottles and
containers in use must be distinctly and correctly labeled.
(d) Wet
sterilizer.
(e) Dry
sterilizer.
(f) Manicuring
sterilizer.
(g) Soap
dispenser.
(h) Covered
waste container.
(i) Cabinet for
supply of clean linens.
(j) Covered
containers for soiled linens.
(k) Cabinets for
accessories.
(l) Individual
paper towel container.
(m) Manicuring
cups for preparation of solution from stock supplies.
(n) Various
solutions and preparations used. (KBB:Sch:Eqmt-1; 1 Ky.R. 728; eff. 5-14-75;
Am. 10 Ky.R. 899; eff. 2-1-84.)