WAC 296-874-300: Suspended Scaffolds

Link to law: http://apps.leg.wa.gov/wac/default.aspx?cite=296-874-300
Published: 2015

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now

WACs > Title 296 > Chapter 296-874 > Section 296-874-300



Agency filings affecting this section

WAC 296-874-300

Suspended scaffolds.

Summary Your responsibility: To meet these requirements when using suspended scaffolds.

You must meet the requirements … in this section:

Make sure suspended scaffolds and scaffold components meet these strength requirements WAC 296-874-30002

Make sure suspended scaffold outrigger beams meet these requirements WAC 296-874-30004

Make sure counterweights are safe and used properly WAC 296-874-30006

Make sure tiebacks meet these requirements WAC 296-874-30008

Make sure suspended scaffold support devices meet these requirements WAC 296-874-30010

Make sure scaffold hoists meet these requirements WAC 296-874-30012

Make sure scaffold hoists retain enough suspension rope WAC 296-874-30014

Make sure wire rope is in good condition WAC 296-874-30016

Make sure wire suspension rope connections meet these requirements WAC 296-874-30018

Make sure wire rope clips are used properly WAC 296-874-30020

Prevent swaying of two-point and multipoint suspension scaffolds WAC 296-874-30022

Use emergency escape and rescue devices appropriately WAC 296-874-30024

Protect suspension ropes from heat or corrosive substances WAC 296-874-30026

Take precautions while welding WAC 296-874-30028

Prohibit use of gasoline-powered equipment on suspended scaffolds WAC 296-874-30030

Meet these requirements when using catenary scaffolds WAC 296-874-30032

Meet these requirements when using float (ship) scaffolds WAC 296-874-30034

Meet these requirements when using interior hung scaffolds WAC 296-874-30036

Meet these requirements when using multilevel suspended scaffolds WAC 296-874-30038

Meet these requirements when using multipoint adjustable suspension scaffolds WAC 296-874-30040

Meet these requirements when using needle beam scaffolds WAC 296-874-30042

Meet these requirements when using single-point adjustable suspension scaffolds WAC 296-874-30044

Meet these requirements when using two-point adjustable suspension scaffolds (swing stages) WAC 296-874-30046

[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050. WSR 15-23-086, § 296-874-300, filed 11/17/15, effective 12/18/15. Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 05-01-054, § 296-874-300, filed 12/7/04, effective 3/1/05.]