Weights and Measures (Prescribed Stamp) (Jersey) Order 1975

Link to law: http://www.jerseylaw.je/Law/display.aspx?url=lawsinforce%2fconsolidated%2f05%2f05.925.70_WeightsandMeasures(PrescribedStamp)Order1975_RevisedEdition_31August2004.htm
Published: 2004-08-31

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now
Weights and Measures (Prescribed Stamp) (Jersey) Order 1975

Revised Edition

05.925.70

Showing the law as at 31 August 2004

This is a revised edition of the law

Weights and Measures (Prescribed Stamp) (Jersey) Order 1975

Arrangement

Article

1            ‎

2            ‎

SCHEDULE 1

FORM OF STAMP FOR USE BY AN INSPECTOR GENERALLY

SCHEDULE 2

FORM OF STAMP FOR USE BY AN INSPECTOR WHERE STAMP IS LESS THAN 3/8 INCH IN OVERALL SIZE

SCHEDULE 3

FORM OF STAMP FOR USE BY AN INSPECTOR FOR STAMPING GLASS MEASURES USED FOR THE SALE OF INTOXICATING LIQUOR

Supporting Documents

Endnotes

Table of Legislation History

Table of Renumbered Provisions

Table of Endnote References



Weights and Measures (Prescribed Stamp) (Jersey) Order 1975

THE ENVIRONMENT AND PUBLIC SERVICES COMMITTEE, in pursuance of Article 12(3) of the Weights and Measures (Jersey) Law 1967,[1] orders as follows –

Commencement [see endnotes]

1      ‎

The stamp prescribed for use by an inspector in the stamping of weighing and measuring equipment which has been passed as fit for use for trade shall be –

(a)     subject to sub-paragraphs (b) and (c), a stamp in the form described in Schedule 1;

(b)     in the case of a stamp which is less than 3/8 of one inch in overall size, a stamp in the form described in Schedule 2;

(c)     in the case of a stamp for the stamping of a measure made of glass and used for the sale of intoxicating liquor, in the form described in Schedule 3.

2      ‎

This Order may be cited as the Weights and Measures (Prescribed Stamp) (Jersey) Order 1975.

SCHEDULE 1

(Article 1(a))

FORM OF STAMP FOR USE BY AN INSPECTOR GENERALLY

A stamp comprising –

(i)     a crest in the form indicated below, and

(ii)    in close proximity to the said crest (if so desired) a date mark consisting of numerals and letters indicating the month and the year in which the equipment is stamped.

Diagram of the crest referred to above

SCHEDULE 2

(Article 1(b))

FORM OF STAMP FOR USE BY AN INSPECTOR WHERE STAMP IS LESS THAN 3/8 INCH IN OVERALL SIZE

A stamp comprising –

(i)     a crown in the form indicated below, and

(ii)    subjacent to the said crown, the letter “J”,

(iii)   in close proximity to the said crown (if so desired) a date mark consisting of numerals and letters indicating the month and the year in which the equipment is stamped.

Diagram of the crown referred to above

SCHEDULE 3

(Article 1(c))

FORM OF STAMP FOR USE BY AN INSPECTOR FOR STAMPING GLASS MEASURES USED FOR THE SALE OF INTOXICATING LIQUOR

A stamp comprising –

(i)     a crown in the form indicated in Schedule 2,

(ii)    subjacent to the said crown, the letter “J”.

Endnotes

Table of Legislation History



Legislation



Year and No



Commencement



Weights and Measures (Prescribed Stamp) (Jersey) Order 1975



R&O.6231



1 January 1976



Table of Renumbered Provisions



Original



Current



2



spent, omitted from this revised edition



3



2



Table of Endnote References



[1]



chapter 05.925