AR 290/2000 MILLWRIGHT TRADE REGULATION (Consolidated up to 117/2015)
ALBERTA REGULATION 290/2000
Apprenticeship and Industry Training Act
MILLWRIGHT TRADE REGULATION
Table of Contents
1 Definitions
General Matters Respecting the Trade
2 Constitution of the trade
3 Tasks, activities and functions
Apprenticeship
4 Term of the apprenticeship program 5 Employment of apprentices
6 Wages
Transitional Provisions, Repeals, Expiry and Coming into Force
7 Apprenticeship continues
8 Repeal
9 Expiry
10 Coming into force
Definitions
1 In this Regulation,
(a) “apprentice” means a person who is an apprentice in the trade;
(b) “certified journeyperson” means a certified journeyperson as defined in the Apprenticeship Program Regulation;
(c) “millwright equipment and machinery” means any type of plant, industrial machinery or mechanical equipment and without limiting the generality of the foregoing includes
(i) stationary and industrial engines;
(ii) gas turbines;
(iii) steam turbines;
(iv) pumps;
(v) heat exchangers;
(vi) conveyor systems;
(vii) gears and speed changers;
(viii) mining equipment;
(ix) logging equipment;
(x) compressors;
(xi) hydraulics;
(xii) air blowers and vacuum pumps and fans;
(xiii) gas and air dryers;
(xiv) refrigeration;
(xv) power transmissions;
(xvi) couplings and clutches;
(xvii) power generators;
(d) “technical training” means technical training as defined in the Apprenticeship Program Regulation;
(e) “trade” means the occupation of millwright that is designated as an optional certification trade pursuant to the Apprenticeship and Industry Training Act;
(f) “uncertified journeyperson” means an uncertified journeyperson as defined in the Apprenticeship Program Regulation.
AR 290/2000 s1;270/2006;215/2009
General Matters Respecting the Trade
Constitution of the trade
2 The following undertakings constitute the trade:
(a) the installation, maintenance and repair of millwright equipment and machinery;
(b) the removal and replacement of millwright equipment and machinery;
(c) the diagnosing of problems relating to millwright equipment and machinery.
Tasks, activities and functions
3 When practising or otherwise carrying out work in the trade, the following tasks, activities and functions come within the trade:
(a) dismantling, assembling and repairing parts and components in millwright equipment and machinery;
(b) fitting, aligning and testing parts and components in millwright equipment and machinery;
(c) fitting bearings, aligning gears and shafts, attaching motors and connecting couplings and belts in relation to millwright equipment and machinery;
(d) using hand, power and other tools of the trade while working on millwright equipment and machinery;
(e) interpreting drawings and plans and laying out and developing projects according to specifications;
(f) using precision instruments to measure, assemble and fit complex plant or industrial machinery or other related equipment;
(g) setting up and operating standard machine tools, including saws, drill presses, lathes and milling machines, and their attachments, to facilitate the efficient completion of the assembly and repair of millwright equipment and machinery;
(h) using, in relation to millwright equipment and machinery, measuring and testing devices and rigging equipment;
(i) heating and cutting with oxy-acetylene equipment;
(j) tack welding with electric arc welding equipment;
(k) removing and installing electric motors, but does not include the electrical disconnecting or hookup of electric motors.
AR 290/2000 s3;251/2003;215/2009
Apprenticeship
Term of the apprenticeship program
4(1) Subject to credit for previous training or experience being granted pursuant to an order of the Board, the term of an apprenticeship program for the trade is 4 periods of not less than 12 months each.
(2) In the first period of the apprenticeship program an apprentice must acquire not less than 1560 hours of on the job training and successfully complete the technical training that is required or approved by the Board.
(3) In the 2nd period of the apprenticeship program an apprentice must acquire not less than 1560 hours of on the job training and successfully complete the technical training that is required or approved by the Board.
(4) In the 3rd period of the apprenticeship program an apprentice must acquire not less than 1560 hours of on the job training and successfully complete the technical training that is required or approved by the Board.
(5) In the 4th period of the apprenticeship program an apprentice must acquire not less than 1560 hours of on the job training and successfully complete the technical training that is required or approved by the Board.
Employment of apprentices
5(1) Where a person employs an apprentice, that employment must be carried out in accordance with this section.
(2) Subject to subsection (3), a person who is a certified journeyperson or an uncertified journeyperson in the trade or employs a certified journeyperson or an uncertified journeyperson in the trade may employ 2 apprentices and 2 additional apprentices for each additional certified journeyperson or uncertified journeyperson in the trade that is employed by that person.
(3) Subsection (2) does not apply to an apprentice who is engaged in an apprenticeship program in the trade and has completed all the requirements required or approved by the Board for advancement into the 4th period of that apprenticeship program.
AR 290/2000 s5;102/2006;270/2006;1/2011
Wages
6(1) Subject to the Apprenticeship Program Regulation, a person shall not pay wages to an apprentice that are less than those provided for under subsection (2).
(2) Subject to the Employment Standards Code, a person employing an apprentice must pay wages to the apprentice that are at least equal to the following percentages of the wages paid to employees who are certified journeypersons or uncertified journeypersons in the trade:
(a) 60% in the first period of the apprenticeship program;
(b) 70% in the 2nd period of the apprenticeship program;
(c) 80% in the 3rd period of the apprenticeship program;
(d) 90% in the 4th period of the apprenticeship program.
AR 290/2000 s6;270/2006
Transitional Provisions, Repeals, Expiry and Coming into Force
Apprenticeship continues
7 A person who immediately prior to January 1, 2001 was an apprentice in an apprenticeship program under the Millwright Trade Regulation (AR 289/93) continues as an apprentice in that apprenticeship program under this Regulation.
Repeal
8 The Millwright Trade Regulation (AR 289/93) is repealed.
Expiry
9 For the purpose of ensuring that this Regulation is reviewed for ongoing relevancy and necessity, with the option that it may be repassed in its present or an amended form following a review, this Regulation expires on August 31, 2024.
AR 290/2000 s9;37/2005;117/2015
Coming into force
10 This Regulation comes into force on January 1, 2001.