Vehicle Standard (Australian Design Rule 35/02 – Commercial Vehicle Brake Systems) 2007 Amendment 1
I, ANTHONY NORMAN ALBANESE, Minister for Infrastructure, Transport, Regional Development and Local Government, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.
 
 
 
 
Dated               24        February                      2009
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
[Signed]
 
ANTHONY NORMAN ALBANESE
 
Minister for Infrastructure, Transport, Regional Development and Local Government
 
CONTENTS
 
1.           legislative provisions. 3
2.           amendment of vehicle standard.. 3
Schedule 1. 4
 
1.                                          legislative provisions
1..1.                                  Name of Legislative Instrument
1..1.1.                            This instrument is the Vehicle Standard (Australian Design Rule 35/02 – Commercial Vehicle Brake Systems) 2007 Amendment 1.
1..2.                                  Commencement
1..2.1.                            This instrument commences on the day after it is registered.
2.                                          amendment of vehicle standard
2..1.                                  The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 35/02 – Commercial Vehicle Brake Systems) 2007.
 
Schedule 1
[1]               Insert a new clause 8.2. to read
“The technical requirements adopted by the United Nations– Economic Commission for Europe (UNECE) Regulation No. 13-H– UNIFORM PROVISIONS CONCERNING THE APPROVAL OF PASSENGER CARS WITH REGARD BRAKING, incorporating the 00 series of amendments from supplement 5 onwards shall be deemed to be equivalent to the technical requirements of this standard for NA category vehicles.”