Greenhouse and Energy Minimum Standards (Exemption) Instrument (No. 2) 2014
Greenhouse and Energy Minimum Standards Act 2012
I, David Walker, being the person occupying the position of GEMS Regulator, make this instrument under subsection 37(1) and (2) of the Greenhouse and Energy Minimum Standards Act 2012.
Dated 19 September 2014
1 Name of Determination
This instrument is the Greenhouse and Energy Minimum Standards (Exemption) Instrument (No.2) 2014.
This instrument comes into force on the day after it is registered.
In this instrument:
Act means the Greenhouse and energy Minimum Standards Act 2012.
exempt model: see section 4.
Note: Several other words and expressions used in this instrument have the meaning given by section 5 of the Act. For example:
· GEMS determination
· GEMS labelling requirements
· GEMS level requirements
· model identifier
· product classes
4 Exemption of model of a GEMS product from requirements of GEMS determination
The model specified at clause 1 of the Schedule (the exempt model) is exempt from the requirements of the GEMS determination as described at clause 2 of the Schedule with respect to the supplies or uses of the exempt model specified at clause 3 of the Schedule.
5 Conditions of exemption
The conditions (if any) at clause 4 of the Schedule are specified for the purposes of subsection 37(2) of the Act.
Note: Subsection 37(2) of the Act provides that the exemption may specify conditions to which the exemption is subject. Subsection 37(3) provides that a person must comply with a condition of an exemption to the extent that it applies to the person.
Schedule Exemption and conditions of exemption
Part 1 Exemption
1 Specification of exempt models
Product class 1
WEG Australia Pty Ltd
3kw 6P 112M W22
(custom electric motor)
2 Requirements from which model is exempt
Requirements of the Greenhouse and Energy Minimum Standards (Three Phase Cage Induction Motors) Determination 2012 as follows:
GEMS level requirements (section 6)
The model is exempted from the energy use and testing requirements mentioned in section 6 of the Determination.
GEMS labelling requirements (section 7)
The model is exempted from the labelling and testing requirements mentioned in section 7 mentioned in section 7 of the Determination.
3 Supplies and uses to which the exemption applies
All supplies and uses of the exempt models are permitted.
4 Specification of conditions of exemption
There are no conditions to which the exemption is subject.