Radiocommunications (MF and HF Equipment – Land Mobile Service) Standard 2014

Link to law: https://www.comlaw.gov.au/Details/F2014L01251

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now
Radiocommunications (MF and HF Equipment – Land Mobile Service) Standard 2014
Radiocommunications Act 1992
 
The AUSTRALIAN COMMUNICATIONS AND MEDIA AUTHORITY makes this Standard under subsection 162(1) of the Radiocommunications Act 1992.
 
 
Dated 9th September 2014
 
 
 
 
Chris Chapman
[signed]
Member
 
 
Richard Bean
[signed]
Member / General Manager
 
 
Australian Communications and Media Authority
 
 
1          Name of Standard
This Standard is the Radiocommunications (MF and HF Equipment – Land Mobile Service) Standard 2014.
2          Commencement
This Standard commences on the day after it is registered.
Note:   All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See www.comlaw.gov.au.
 
3          Revocation
The Radiocommunications (MF and HF equipment – Land Mobile Service) Standard 2003 [F2005B00174] is revoked.
4          Definitions
In this Standard:
Act means the Radiocommunications Act 1992.
applicable device means a radiocommunications device to which this Standard applies, as provided by subsection 5(1).
AS/NZS 4770 means:
(a)           AS/NZS 4770:2000 MF and HF radiocommunications equipment in the land mobile service utilizing single sideband suppressed carrier emission published by Standards Australia, as in force or existing from time to time; or
(b)          if a later standard published by Standards Australia is expressed to replace the standard mentioned in paragraph (a) – the later standard, as in force or existing from time to time.
Chair means the Chair of the ACMA. 
commencement day means the day on which this Standard commences.
included in a class of radiocommunications devices has the meaning given by:
(a)           in relation to an applicable device other than a modified device – paragraph 6(1)(a); and
(b)          in relation to a modified device – paragraph 6(2)(a).
J3E means an emission whose basic characteristic is that of a single sideband amplitude modulated suppressed carrier on a single channel containing primarily analogue telephony information.
            land mobile service has the meaning given by the Radiocommunications (Interpretation)             Determination 2000.
manufactured, in relation to an applicable device, means manufactured in Australia.
modified, in relation to a radiocommunications device, means modified or altered in a material respect in Australia (after the device was manufactured or imported) by or on behalf of, the manufacturer or importer of the device.
modified device means:
(a)           an applicable device that has been modified; and
(b)          a radiocommunications device that has been modified in such a way that it becomes an applicable device.
original modified device has the meaning given by paragraph 6(2)(b).
original radiocommunications device has the meaning given by paragraph 6(1)(b).
 
relevant date, for an applicable device, means the date specified in section 7 in relation to the device.
significant event means an event at a location or locations specified in a notice approved by the Chair and published on the ACMA’s website at http://www.acma.gov.au.
            single sideband  has the meaning given by the Radiocommunications (Interpretation)           Determination 2000.
Note   Several other words and expressions used in this Standard have the meaning given by the Act, including:
·            ACMA (section 5)
·            radiocommunications device (subsection 7(1)).
5          Application
(1)     This Standard applies to a radiocommunications device (an applicable device) that:
(a)        is intended for use in conjunction with a land mobile service;
(b)       operates in the frequency range 2 MHz to 30 MHz;
(c)        operates in J3E mode; and
(d)       is not a device mentioned in subsection (2).
Exception — device imported for significant event
(2)     This subsection applies to a radiocommunications device that:
(a)      is imported into Australia solely for use in connection with a significant event;
(b)      if there is a requirement that the device is tested or inspected before it may be used in Australia — meets the requirement;
(c)      if there is a condition or requirement imposed on the use of the device in Australia — is used in compliance with that condition or requirement;
(d)      is used in Australia only at the location of the significant event; and
(e)      is used in Australia only for the duration of the significant event.
6          When is a device included in a class of radiocommunications devices?
(1)      In this Standard:
(a)      an applicable device, other than a modified device, is included in a class of radiocommunications devices if the device:
(i)            is identical to each other device of the class (irrespective of when the devices were manufactured or imported); and
(ii)          has the same manufacturer or importer as each other device of the class; and
(b)      the original radiocommunications device, in relation to the class of radiocommunications devices, is the device of the class that was the first to be manufactured or imported.
(2)      In this Standard:
(a)      a modified device is included in a class of radiocommunications devices if: 
(i)            the modification made to create the device is identical to the modification made to create each other device of the class (irrespective of when the devices were so modified);
(ii)          the device is, in all other respects, identical to each other device of the class (irrespective of when the devices were manufactured or imported); and
(iii)        the device has the same manufacturer or importer as each other device of the class; and
(b)      the original modified device, in relation to the class of radiocommunications devices, is the device of the class that was the first to be created by being so modified.          
7          Relevant date for an applicable device
For the purposes of this Standard, the relevant date for an applicable device is:
(a)      in the case of an applicable device (other than a modified device) that is included in a class of radiocommunications devices – the date the original radiocommunications device was manufactured or imported;
(b)      in the case of a modified device that is included in a class of radiocommunications devices – the date the modification was made to create the original modified device of the class; or
(c)      otherwise – the date the device was manufactured or imported.
8          Standard for performance
(1)     For paragraph 162(1)(a) of the Act, the standard for performance of an applicable device is as set out in AS/NZS 4770, as in force or existing at the relevant date for the device.
(2)     If the relevant date for the device occurs during a transition period, the standard for performance with which the device must comply is either:
(a)      AS/NZS 4770 as in existence immediately before the transition period commenced; or
(b)      AS/NZS 4770 as in existence during the transition period.          
(3)     If:
(a)      AS/NZS 4770 is amended or replaced during a transition period (the first transition period) so that there is a further transition period (the second transition period); and
(b)      the relevant date for the device occurs at a time when the first transition period and the second transition period overlap;
the standard for performance with which the device must comply is one of the following:
(c)      AS/NZS 4770 as in existence immediately before the first transition period commenced;
(d)      AS/NZS 4770 as in existence during the first transition period; or
(e)      AS/NZS 4770 as in existence during the second transition period.
(4)     If AS/NZS 4770 is:
(a)      amended; or
(b)      replaced;
then, for the purposes of this section, the transition period is the 1 year period commencing on the day AS/NZS 4770 was:
(c)      amended; or
(d)      replaced;
as the case may be.     
9          Transitional arrangements – devices manufactured, imported or modified before commencement day
If:
(a)      the relevant date for an applicable device occurred before the commencement day; and
(b)      at the relevant date the device complied with the Radiocommunications (MF and HF equipment – Land Mobile Service) Standard 2003,
then the device is taken to comply with this Standard.