Advanced Search

Vehicle Standard (Australian Design Rule 38/03 - Trailer Brake Systems) 2007 Amendment 1

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.
 
 
 
 
Vehicle Standard (Australian Design Rule 38/03 – Trailer Brake Systems) 2007 Amendment 1
I, JAMIE EDWARD BRIGGS, Assistant Minister for Infrastructure and Regional Development, determine this vehicle standard under subsection 7 of the Motor Vehicle Standards Act 1989.
 
 
 
 
Dated              25/08 /2014                            
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SIGNED
 
Jamie Edward Briggs
 
Assistant Minister for Infrastructure and Regional Development
 
CONTENTS
 
1.               legislative provisions. 3
2.               amendment of vehicle standard.. 3
Schedule 1. 4
 
1.                                          legislative provisions
1.1.                                    Name of Legislative Instrument
1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 38/03 – Trailer Brake Systems) 2007 Amendment 1.
1.2.                                    Commencement
1.2.1.                              This instrument commences on the day after it is registered.
2.                                          amendment of vehicle standard
2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 38/03 – Trailer Brake Systems) 2007.
Schedule 1
[1]               Clause 2 amend “...from the dates set out in clauses 2.1, 2.2 and a table below” to “...from the dates set out in clauses 2.1, 2.2 and 2.5.”
[2]               Clause 2.4 renumber as 2.5
[3]               Insert a new clause 2.4 to read
“Vehicles certified to ADR 38/04 or a later version need not comply with this rule.”