IT ' S SMART

Specifies the specification for the fish ship design.

________________

Base of Protocol 199 /2013/NĐ-CP November 26, 2013 of the Government regulates the functions, duties, powers, and organizational structure of the Ministry of Agriculture and Rural Development;

Base of Protocol 67 /2014/ND-CP July 07, 2014 of the Government on certain policies of fisheries development;

At the suggestion of the president of the General Directorate of Fisheries,

The Minister of Agriculture and Rural Development issued the Specification Requirements for the design of the fish ship.

Chapter I

GENERAL REGULATION

What? 1. Modified Range

This is a specification for the design of a steel-shell, wooden shell, a new material shell that has a total engine capacity of 400 CV or more.

What? 2. Subject applies

This information applies to the organization, the individual involved in the design of the steel-shell vessel, the wooden shell, the new material shell that has the total main engine capacity from 400 CV onwards.

What? 3. Explain words

In this message the terms below are understood as follows:

1. Fish-ship design: as the typical design on the basis that has been unified, there are preeminent indicators that fit the profession, the waters that operate the fisheries.

2. The new material: is the material that has muscle, li, the chemical guarantee used for shipbuilding not including steel materials, aluminum, wood.

Chapter II

TECHNICAL REQUIREMENTS FOR FISH SHIP DESIGN

What? 4. General Request

1. Technical design must fully present the number of metrics needed to demonstrate compliance with the hierarchy and shipbuilding (Catalogue of the categories of hierarchy and shipbuilding under the Appendix issued by this message).

2. The calculation to determine the parameters and quantities must be consistent with the corresponding rule requirements or by the calculation method approved by the Central Fish (Fisheries Directorate).

3. The template design must match the workmanship and the active waters.

What? 5. Design Process

The process of designing a fish vessel consists of steps:

1. Preliminary design:

a) Define the basic parameters;

b) Build the line;

c) Build a preliminary texture drawing, cross-section;

d) Build common layout;

) Calculating preliminary stability;

e) Calculation, main machine capacity option, push system;

g) Sketch and build 3D maps;

) General theory.

2. Technical design.

The technical design is done after the completion of the preliminary design and the consent of the investment owner. The design unit performs a technical design of the steps:

a) Construction of a technical design profile: The design of a fish vessel engineering design profile is established in accordance with section 1A chapter 5 of the distribution and shipbuilding of the sea fish TCVN 6718: 2000;

b) Set up the price of the ship.

What? 6. Technical requirements

1. The hull design, the ship system, the electrical equipment, the fire equipment, the means of salvation, the signal vehicle, the radio equipment equipment, the maritime equipment, the cold equipment must satisfy the requirement under the terms of the hierarchy and the fishing vessel. Sea TCVN 6718: 2000.

Fishery equipment design must meet requirements at section 6B of the distribution and sub-size of TCVN 7111: 2002.

2. The fish capsule design must be satisfied that the layout of the equipment installation is suitable for specific operators:

a) For a relational grid, the layout of the reinstallation of a grid-based friction-based friction machine, which has an independent dynamic source of momentum, grid observation and lifting equipment;

b) For the siege grid, the layout of the installation equipment, the retraction machine, and the two-headed hydraulic transmission, the high-level hydraulic fin harvesting, the horizontal detector.

c) For a procurement grid that requires the installation of an elevated device, the retraction machine draws hydraulic transmission or mechanical transmission;

d) For yellow fishing requires the layout of the installation of a hydraulic-powered automatic recording machine, the power-control machine, and the lifting device;

For the logistics service ship, the fishery requires an installation of advanced equipment.

3. Equipment that elevate deployment on ships making trades, nets, nets, gold sentences and logistics service ships must satisfy the requirements of the QCVN 23 National Technical Regulation 23: 2010 /BGTVT-the scope of shipping equipment. The preservation of the cold-bay product ensures that maintaining the temperature in the cavity suitable for fisheries extraction, ensuring food safety, reduces post-harvest losses.

4. The fish ship design must be consistent with each marine active marine activity.

Chapter III

THE ORGANIZATION.

What? 7. Fisheries Directorate

1. Organization of the Scout, instructs local, propagation, dissemination to units, organizations, individuals involved.

2. The organization for the design of the fish ship design, the Ministry of Agriculture and Rural Development approved and announced the design of the selected ship.

3. Track, aggregation, periodic (06 months) report of the Minister of Agriculture and Rural Development on the situation to implement the implementation of the Information.

What? 8. The responsibility of the Department of Agriculture and Rural Development

1. The propaganda organization, which guides organizations, individuals are involved in implementing the regulations on technical requirements for the fish ship design.

2. The host guide selects the design of the fish ship in line with the craft and the active waters.

3. Trace, aggregation, periodic (6 months) report of the deployment of this Information implementation in the locality of the Ministry of Agriculture and Rural Development (through the General Directorate of Fisheries).

What? 9. The organization ' s responsibility, personal

1. The responsibility of the design unit

a) The design of the fish vessel in accordance with the rules;

b) The Marine General Manager of the fish ship design for the appraisal;

c) Make a stable announcement for the captain after the completion of the fishing vessel, which has a deflated test result.

2. The owner of the ship

a) The selection of the sample design to close the fish vessel in accordance with the profession and the active waters;

b) During the course of the fishing ship, or as soon as the ship was built, the ship had the right to request the design unit to adjust the design to the design, but did not affect the ship's performance and safety. The owner of the ship was in charge of coordinating with the design unit of the design regulator.

c) The adjustment of the fish ship design stated at point b 2 This must be approved by the General Directorate of Fisheries.

What? 10. Terms of execution

1. This message came into effect on 25 August 2014.

2. Standards, the standard of National Engineering that is shown to apply at this message when modified, supplematable or substitution is shown to apply according to the revised text, additional replacement.

3. The units of the Ministry of Agriculture and Rural Development, the Department of Agriculture and Rural Development of the provinces, the Central City and the Organization, the relevant individual responsible for this private practice.

4. During the course of the exercise, if there is difficulty, entangrium, agencies, units, organizations, individuals reflect on the Ministry of Agriculture and Rural Development (through the General Directorate of Fisheries) to sum up, the Minister considers, the ./.