Key Benefits:
On 10 September 2014 (State on 15 December 2015)
The Federal Office for Construction and Logistics (OFCL),
After consulting the State Secretariat for Economic Affairs (SECO) and the Federated Commission A Construction products,
Having regard to art. 2, para. 1, 3, 4, para. 2, 9, para. 4, and 20, para. 2 and 3, of the order of 27 August 2014 on construction products (OPCW) 1 , 2
Stops:
The acts of the European Union referred to in Annexes 1 and 2 shall apply as technical requirements for the implementation of the Federal Law of 21 March 2014 on Construction Products (LPCo) 2 And the OPCW.
1 New content according to the c. I of the O of OFCL of 24 Nov 2014, in force since 15 Dec. 2014 ( RO 2014 4233 ).
2 RS 933.0
This order shall enter into force on 1 Er October 2014.
(art. 1)
The implementing acts applicable in the European Union (EU) under Art. 65, para. 2, Regulation (EU) n O 305/2011 2 Are mentioned as acts of the EU in Annex I, chap. 16, Section I, of the Agreement of 21 June 1999 between the Swiss Confederation and the European Community on mutual recognition in the field of conformity assessment 3 As long as these implementing acts are valid in the EU, they constitute implementing provisions within the meaning of Art. 35, para. 3, LPCo 4 .
1 Introduced by c. II al. 2 of the OFCL O of 24 Nov 2014, in force since 15 Dec. 2014 ( RO 2014 4233 ).
2 R (EU) n O 305/2011 of the European Parliament and of the Council of 9 March 2011 establishing harmonised conditions for the marketing of construction products and repealing Council Directive 89 /106/EEC, OJ L 88, 4.4.2011, p. 5.
3 RS 0.946.526.81
4 RS 933.0
Art. 1)
The following acts of execution constitute implementing provisions within the meaning of Art. 35, para. 3, LPCo 2 .
| Category |
European Union Act |
| Conditions under which a construction product is presumed to reach a certain level or class of performance without trial (s. 3, let. B, OPCW) |
Delegated Regulation (EU) n O 1293/2014 of the Commission of 17 July 2014 on the conditions of classification, without tests, of metal lattis and hinges intended for the application of internal coated products covered by the harmonised standard EN 13658-1, of the lattis and angles Metallic for the application of the outer coating of the harmonised standard EN 13658-2, as well as of metal angles and profiles falling within the harmonised standard EN 14353, in relation to their characteristics of reaction to fire, OJ L 349, 5.12.2014, p. 29 |
| Conditions under which a construction product is presumed to reach a certain level or class of performance without trial (s. 3, let. B, OPCW) |
Delegated Regulation (EU) n O 1292/2014 of the Commission of 17 July 2014 concerning the conditions for the classification, without further tests, of certain uncoated wooden floors and wooden floors conforming to the standard EN 14342 with regard to their reaction to fire, OJ L 349 of 5.12.2014, p. 27 |
| Conditions under which a construction product is presumed to reach a certain level or class of performance without trial (s. 3, let. B, OPCW) |
Delegated Regulation (EU) n O 1291/2014 of the Commission of 16 July 2014 on the conditions of classification, without tests, of wood-based panels falling within the standard EN 13986 and wood panelling and bardages falling within the standard EN 14915 with regard to their Fire protection capacity, when used for walls and ceilings, OJ L 349, 5.12.2014, p. 25 |
| Systems for evaluating and verifying the constancy of performance applicable to a construction product, a family of construction products or an essential characteristic (Art. 4, para. 2, OPCW) |
Commission Decision (EU) 2015/1959 of 1 Er July 2015 on the applicable systems for the assessment and verification of the performance of sewerage products under the Regulation (EU) n O 305/2011 of the European Parliament and of the Council, OJ L 284, 30.10.2015, p. 184 |
| Systems for evaluating and verifying the constancy of performance applicable to a construction product, a family of construction products or an essential characteristic (Art. 4, para. 2, OPCW) |
Commission Decision (EU) 2015/1958 of 1 Er July 2015 on the applicable systems for the evaluation and verification of the performance of geosynthetics and related products under the Regulation (EU) n O 305/2011 of the European Parliament and of the Council, OJ L 284, 30.10.2015, p. 181 |
| Systems for evaluating and verifying the constancy of performance applicable to a construction product, a family of construction products or an essential characteristic (Art. 4, para. 2, OPCW) |
Commission Decision (EU) 2015/1936 of 8 July 2015 on the systems applicable to the evaluation and verification of the performance of air ducts and ducts under the Regulation (EU) n O 305/2011 of the European Parliament and of the Council, OJ L 282, 28.10.2015, p. 34 |
| Conditions for making the declaration of performance available on an Internet site (Art. 9, para. 4, let. A, OPCW) |
Delegated Regulation (EU) n O 157/2014 of the Commission of 30 October 2013 concerning the conditions for publication on a website of a declaration of performance relating to construction products, OJ L 52, 21.2.2014, p. 1 |
| Format of European technical assessments (Art. 20, para. 2, OPCW) |
Regulations (EU) n O 1062/2013 of the Commission of 30 October 2013 on the format of the European technical evaluation for construction products, OJ L 289, 31.10.2013, p. 42 |
1 Formerly an annex. New content according to the c. I of the OFCL O of 30 Nov 2015, in force since 15 Dec. 2015 ( RO 2015 4993 ).
2 RS 933.0
